Seems incredible that this is all it took. Needs more testing.
I also need to rethink how we organize our layers about addresses.
Alloc-id stuff is scattered everywhere. The space for alloc-ids is
perhaps unavoidably scattered. Just assume the layout from the start.
But it seems bad that the scenario testing the lookup-time validation is
in the 'abandon' layer when the code is in the 'lookup' layer.
I've been working on this slowly over several weeks, but it's too hard
to support 0 as the null value for addresses. I constantly have to add
exceptions for scalar value corresponding to an address type (now
occupying 2 locations). The final straw is the test for 'reload':
x:num <- reload text
'reload' returns an address. But there's no way to know that for
arbitrary instructions.
New plan: let's put this off for a bit and first create support for
literals. Then use 'null' instead of '0' for addresses everywhere. Then
it'll be easy to just change what 'null' means.
I have a plan for a way to avoid use-after-free errors without all the
overheads of maintaining refcounts. Has the nice side-effect of
requiring manual memory management. The Mu way is to leak memory by
default and build tools to help decide when and where to expend effort
plugging memory leaks. Arguably programs should be distributed with
summaries of their resource use characteristics.
Eliminating refcount maintenance reduces time to run tests by 30% for
`mu edit`:
this commit parent
mu test: 3.9s 4.5s
mu test edit: 2:38 3:48
Open questions:
- making reclamation easier; some sort of support for destructors
- reclaiming local scopes (which are allocated on the heap)
- should we support automatically reclaiming allocations inside them?
Instead of setup() and teardown() we'll just use a reset() function from
now on, which will bring the machine back to a good state before each
test or run, and also before exit (to avoid memory leaks).
Standardize exit paths. Most layers now don't need to know about termbox.
We can't really use `assert` in console-mode apps; it can't just exit because
we want to be able to check assertion failures in tests.
This was a large commit, and most of it is a follow-up to commit 3309,
undoing what is probably the final ill-considered optimization I added
to s-expressions in Mu: I was always representing (a b c) as (a b . c),
etc. That is now gone.
Why did I need to take it out? The key problem was the error silently
ignored in layer 30. That was causing size_of("(type)") to silently
return garbage rather than loudly complain (assuming 'type' was a simple
type).
But to take it out I had to modify types_strictly_match (layer 21) to
actually strictly match and not just do a prefix match.
In the process of removing the prefix match, I had to make extracting
recipe types from recipe headers more robust. So far it only matched the
first element of each ingredient's type; these matched:
(recipe address:number -> address:number)
(recipe address -> address)
I didn't notice because the dotted notation optimization was actually
representing this as:
(recipe address:number -> address number)
---
One final little thing in this commit: I added an alias for 'assert'
called 'assert_for_now', to indicate that I'm not sure something's
really an invariant, that it might be triggered by (invalid) user
programs, and so require more thought on error handling down the road.
But this may well be an ill-posed distinction. It may be overwhelmingly
uneconomic to continually distinguish between model invariants and error
states for input. I'm starting to grow sympathetic to Google Analytics's
recent approach of just banning assertions altogether. We'll see..
Periodic cleanup to replace 'reply' with 'return' everywhere in the
repo.
I use 'reply' for students to help reinforce the metaphor of function
calls as being like messages through a pipe. But that causes 'reply' to
get into my muscle memory when writing Mu code for myself, and I worry
that that makes Mu seem unnecessarily alien to anybody reading on
Github.
Perhaps I should just give it up? I'll try using 'return' with my next
student.
Rip out everything to fix one failing unit test (commit 3290; type
abbreviations).
This commit does several things at once that I couldn't come up with a
clean way to unpack:
A. It moves to a new representation for type trees without changing
the actual definition of the `type_tree` struct.
B. It adds unit tests for our type metadata precomputation, so that
errors there show up early and in a simpler setting rather than dying
when we try to load Mu code.
C. It fixes a bug, guarding against infinite loops when precomputing
metadata for recursive shape-shifting containers. To do this it uses a
dumb way of comparing type_trees, comparing their string
representations instead. That is likely incredibly inefficient.
Perhaps due to C, this commit has made Mu incredibly slow. Running all
tests for the core and the edit/ app now takes 6.5 minutes rather than
3.5 minutes.
== more notes and details
I've been struggling for the past week now to back out of a bad design
decision, a premature optimization from the early days: storing atoms
directly in the 'value' slot of a cons cell rather than creating a
special 'atom' cons cell and storing it on the 'left' slot. In other
words, if a cons cell looks like this:
o
/ | \
left val right
..then the type_tree (a b c) used to look like this (before this
commit):
o
| \
a o
| \
b o
| \
c null
..rather than like this 'classic' approach to s-expressions which never
mixes val and right (which is what we now have):
o
/ \
o o
| / \
a o o
| / \
b o null
|
c
The old approach made several operations more complicated, most recently
the act of replacing a (possibly atom/leaf) sub-tree with another. That
was the final straw that got me to realize the contortions I was going
through to save a few type_tree nodes (cons cells).
Switching to the new approach was hard partly because I've been using
the old approach for so long and type_tree manipulations had pervaded
everything. Another issue I ran into was the realization that my layers
were not cleanly separated. Key parts of early layers (precomputing type
metadata) existed purely for far later ones (shape-shifting types).
Layers I got repeatedly stuck at:
1. the transform for precomputing type sizes (layer 30)
2. type-checks on merge instructions (layer 31)
3. the transform for precomputing address offsets in types (layer 36)
4. replace operations in supporting shape-shifting recipes (layer 55)
After much thrashing I finally noticed that it wasn't the entirety of
these layers that was giving me trouble, but just the type metadata
precomputation, which had bugs that weren't manifesting until 30 layers
later. Or, worse, when loading .mu files before any tests had had a
chance to run. A common failure mode was running into types at run time
that I hadn't precomputed metadata for at transform time.
Digging into these bugs got me to realize that what I had before wasn't
really very good, but a half-assed heuristic approach that did a whole
lot of extra work precomputing metadata for utterly meaningless types
like `((address number) 3)` which just happened to be part of a larger
type like `(array (address number) 3)`.
So, I redid it all. I switched the representation of types (because the
old representation made unit tests difficult to retrofit) and added unit
tests to the metadata precomputation. I also made layer 30 only do the
minimal metadata precomputation it needs for the concepts introduced
until then. In the process, I also made the precomputation more correct
than before, and added hooks in the right place so that I could augment
the logic when I introduced shape-shifting containers.
== lessons learned
There's several levels of hygiene when it comes to layers:
1. Every layer introduces precisely what it needs and in the simplest
way possible. If I was building an app until just that layer, nothing
would seem over-engineered.
2. Some layers are fore-shadowing features in future layers. Sometimes
this is ok. For example, layer 10 foreshadows containers and arrays and
so on without actually supporting them. That is a net win because it
lets me lay out the core of Mu's data structures out in one place. But
if the fore-shadowing gets too complex things get nasty. Not least
because it can be hard to write unit tests for features before you
provide the plumbing to visualize and manipulate them.
3. A layer is introducing features that are tested only in later layers.
4. A layer is introducing features with tests that are invalidated in
later layers. (This I knew from early on to be an obviously horrendous
idea.)
Summary: avoid Level 2 (foreshadowing layers) as much as possible.
Tolerate it indefinitely for small things where the code stays simple
over time, but become strict again when things start to get more
complex.
Level 3 is mostly a net lose, but sometimes it can be expedient (a real
case of the usually grossly over-applied term "technical debt"), and
it's better than the conventional baseline of no layers and no
scenarios. Just clean it up as soon as possible.
Definitely avoid layer 4 at any time.
== minor lessons
Avoid unit tests for trivial things, write scenarios in context as much as
possible. But within those margins unit tests are fine. Just introduce them
before any scenarios (commit 3297).
Reorganizing layers can be easy. Just merge layers for starters! Punt on
resplitting them in some new way until you've gotten them to work. This is the
wisdom of Refactoring: small steps.
What made it hard was not wanting to merge *everything* between layer 30
and 55. The eventual insight was realizing I just need to move those two
full-strength transforms and nothing else.
Undo 3272. The trouble with creating a new section for constants is that
there's no good place to order it since constants can be initialized
using globals as well as vice versa. And I don't want to add constraints
disallowing either side.
Instead, a new plan: always declare constants in the Globals section
using 'extern const' rather than just 'const', since otherwise constants
implicitly have internal linkage (http://stackoverflow.com/questions/14894698/why-does-extern-const-int-n-not-work-as-expected)
Prefer preincrement operators wherever possible. Old versions of
compilers used to be better at optimizing them. Even if we don't care
about performance it's useful to make unary operators look like unary
operators wherever possible, and to distinguish the 'statement form'
which doesn't care about the value of the expression from the
postincrement which usually increments as a side-effect in some larger
computation (and so is worth avoiding except for some common idioms, or
perhaps even there).
Always show instruction before any transforms in error messages.
This is likely going to make some errors unclear because they *need* to
show the original instruction. But if we don't have tests for those
situations did they ever really work?
Standardize quotes around reagents in error messages.
I'm still sure there's issues. For example, the messages when
type-checking 'copy'. I'm not putting quotes around them because in
layer 60 I end up creating dilated reagents, and then it's a bit much to
have quotes and (two kinds of) brackets. But I'm sure I'm doing that
somewhere..
Long-overdue reorganization to support general 'dilated' reagents up
front. This also allows me to move tests that are really about unrelated
layers out of layers dealing with parsing.
Kartik Agaram