50 lines
2.6 KiB
C++
50 lines
2.6 KiB
C++
/*
|
|
* File: fuses.h
|
|
* Author: amr
|
|
*
|
|
* Created on September 30, 2020, 1:34 PM
|
|
*/
|
|
|
|
#ifndef FUSES_H
|
|
#define FUSES_H
|
|
|
|
|
|
// DEVCFG3
|
|
#pragma config USERID = 0xFFFF // Enter Hexadecimal value (Enter Hexadecimal value)
|
|
#pragma config PMDL1WAY = OFF // Peripheral Module Disable Configuration (Allow multiple reconfigurations)
|
|
#pragma config IOL1WAY = OFF // Peripheral Pin Select Configuration (Allow multiple reconfigurations)
|
|
#pragma config FUSBIDIO = ON // USB USID Selection (Controlled by the USB Module)
|
|
#pragma config FVBUSONIO = ON // USB VBUS ON Selection (Controlled by USB Module)
|
|
|
|
// DEVCFG2
|
|
#pragma config FPLLIDIV = DIV_2 // PLL Input Divider (2x Divider)
|
|
#pragma config FPLLMUL = MUL_20 // PLL Multiplier (20x Multiplier)
|
|
#pragma config UPLLIDIV = DIV_4 // USB PLL Input Divider (4x Divider)
|
|
#pragma config UPLLEN = OFF // USB PLL Enable (Disabled and Bypassed)
|
|
#pragma config FPLLODIV = DIV_4 // System PLL Output Clock Divider (PLL Divide by 4)
|
|
// System clock is 20MHz
|
|
// Peripheral clock is 10MHz
|
|
|
|
// DEVCFG1
|
|
#pragma config FNOSC = FRCPLL // Oscillator Selection Bits (Fast RC Osc with PLL)
|
|
#pragma config FSOSCEN = ON // Secondary Oscillator Enable (Enabled)
|
|
#pragma config IESO = ON // Internal/External Switch Over (Enabled)
|
|
#pragma config POSCMOD = OFF // Primary Oscillator Configuration (Primary osc disabled)
|
|
#pragma config OSCIOFNC = OFF // CLKO Output Signal Active on the OSCO Pin (Disabled)
|
|
#pragma config FPBDIV = DIV_2 // Peripheral Clock Divisor (Pb_Clk is Sys_Clk/2)
|
|
#pragma config FCKSM = CSDCMD // Clock Switching and Monitor Selection (Clock Switch Disable, FSCM Disabled)
|
|
#pragma config WDTPS = PS1048576 // Watchdog Timer Postscaler (1:1048576)
|
|
#pragma config WINDIS = OFF // Watchdog Timer Window Enable (Watchdog Timer is in Non-Window Mode)
|
|
#pragma config FWDTEN = OFF // Watchdog Timer Enable (WDT Disabled (SWDTEN Bit Controls))
|
|
#pragma config FWDTWINSZ = WINSZ_25 // Watchdog Timer Window Size (Window Size is 25%)
|
|
|
|
// DEVCFG0
|
|
#pragma config JTAGEN = OFF // JTAG Enable (JTAG Disabled)
|
|
#pragma config ICESEL = ICS_PGx1 // ICE/ICD Comm Channel Select (Communicate on PGEC1/PGED1)
|
|
#pragma config PWP = OFF // Program Flash Write Protect (Disable)
|
|
#pragma config BWP = OFF // Boot Flash Write Protect bit (Protection Disabled)
|
|
#pragma config CP = OFF // Code Protect (Protection Disabled)
|
|
|
|
#endif /* FUSES_H */
|
|
|