audacia
/
audacia
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
audacia/src/BlockFile.cpp

641 lines
20 KiB
C++
Raw Blame History

/**********************************************************************
Audacity: A Digital Audio Editor
BlockFile.cpp
Joshua Haberman
Dominic Mazzoni
*******************************************************************//*!
\class BlockFile
\brief A BlockFile is a chunk of immutable audio data.
A BlockFile represents a chunk of audio data. These chunks are
assembled into sequences by the class Sequence. These classes
are at the heart of how Audacity stores audio data.
BlockFile is an abstract base class that can be implemented in
many different ways. However it does have a fairly large amount
of shared code that deals with the physical file and manipulating
the summary data.
BlockFile should be thought of as an immutable class. After it
is constructed, it is essentially never changed (though there are
a few exceptions). Most notably, the audio data and summary data
are never altered once it is constructed. This is important to
some of the derived classes that are actually aliases to audio
data stored in existing files.
BlockFiles are reference-counted, and deleted when their reference
count hits zero. DirManager is the class responsible for
constructing and managing BlockFiles and managing their reference
counts.
*//****************************************************************//**
\class SummaryInfo
\brief Works with BlockFile to hold info about max and min and RMS
over multiple samples, which in turn allows rapid drawing when zoomed
out.
*//*******************************************************************/
#include "BlockFile.h"
#include <float.h>
#include <math.h>
#include <wx/utils.h>
#include <wx/filefn.h>
#include <wx/ffile.h>
#include <wx/log.h>
#include <wx/math.h>
#include "Internat.h"
// msmeyer: Define this to add debug output via printf()
//#define DEBUG_BLOCKFILE
#ifdef DEBUG_BLOCKFILE
#define BLOCKFILE_DEBUG_OUTPUT(op, i) \
wxPrintf(wxT("[BlockFile %x %s] %s: %i\n"), (unsigned)this, \
mFileName.GetFullName().c_str(), wxT(op), i);
#else
#define BLOCKFILE_DEBUG_OUTPUT(op, i)
#endif
static const int headerTagLen = 20;
static char headerTag[headerTagLen + 1] = "AudacityBlockFile112";
SummaryInfo::SummaryInfo(sampleCount samples)
{
format = floatSample;
fields = 3; /* min, max, rms */
bytesPerFrame = sizeof(float) * fields;
frames64K = (samples + 65535) / 65536;
frames256 = frames64K * 256;
offset64K = headerTagLen;
offset256 = offset64K + (frames64K * bytesPerFrame);
totalSummaryBytes = offset256 + (frames256 * bytesPerFrame);
}
char *BlockFile::fullSummary = 0;
/// Initializes the base BlockFile data. The block is initially
/// unlocked and its reference count is 1.
///
/// @param fileName The name of the disk file associated with this
/// BlockFile. Not all BlockFiles will store their
/// sample data here (for example, AliasBlockFiles
/// read their data from elsewhere), but all BlockFiles
/// will store at least the summary data here.
///
/// @param samples The number of samples this BlockFile contains.
BlockFile::BlockFile(wxFileName fileName, sampleCount samples):
mLockCount(0),
mRefCount(1),
mFileName(fileName),
mLen(samples),
mSummaryInfo(samples)
{
mSilentLog=FALSE;
}
BlockFile::~BlockFile()
{
if (!IsLocked() && mFileName.HasName())
wxRemoveFile(mFileName.GetFullPath());
}
/// Returns the file name of the disk file associated with this
/// BlockFile. Not all BlockFiles store their sample data here,
/// but most BlockFiles have at least their summary data here.
/// (some, i.e. SilentBlockFiles, do not correspond to a file on
/// disk and have empty file names)
wxFileName BlockFile::GetFileName()
{
return mFileName;
}
///sets the file name the summary info will be saved in. threadsafe.
void BlockFile::SetFileName(wxFileName &name)
{
mFileName=name;
}
/// Marks this BlockFile as "locked." A locked BlockFile may not
/// be moved or deleted, only copied. Locking a BlockFile prevents
/// it from disappearing if the project is saved in a different location.
/// When doing a "Save As," Audacity locks all blocks belonging
/// to the already-existing project, to ensure that the existing
/// project remains valid with all the blocks it needs. Audacity
/// also locks the blocks of the last saved version of a project when
/// the project is deleted so that the files aren't deleted when their
/// refcount hits zero.
void BlockFile::Lock()
{
mLockCount++;
BLOCKFILE_DEBUG_OUTPUT("Lock", mLockCount);
}
/// Marks this BlockFile as "unlocked."
void BlockFile::Unlock()
{
mLockCount--;
BLOCKFILE_DEBUG_OUTPUT("Unlock", mLockCount);
}
/// Returns true if the block is locked.
bool BlockFile::IsLocked()
{
return mLockCount > 0;
}
/// Increases the reference count of this block by one. Only
/// DirManager should call this method.
void BlockFile::Ref()
{
mRefCount++;
BLOCKFILE_DEBUG_OUTPUT("Ref", mRefCount);
}
/// Decreases the reference count of this block by one. If this
/// causes the count to become zero, deletes the associated disk
/// file and deletes this object
bool BlockFile::Deref()
{
mRefCount--;
BLOCKFILE_DEBUG_OUTPUT("Deref", mRefCount);
if (mRefCount <= 0) {
delete this;
return true;
} else
return false;
}
void BlockFile::Deinit()
{
if(fullSummary)delete[] fullSummary;
}
/// Get a buffer containing a summary block describing this sample
/// data. This must be called by derived classes when they
/// are constructed, to allow them to construct their summary data,
/// after which they should write that data to their disk file.
///
/// This method also has the side effect of setting the mMin, mMax,
/// and mRMS members of this class.
///
/// You must not DELETE the returned buffer; it is static to this
/// method.
///
/// @param buffer A buffer containing the sample data to be analyzed
/// @param len The length of the sample data
/// @param format The format of the sample data.
void *BlockFile::CalcSummary(samplePtr buffer, sampleCount len,
sampleFormat format)
{
if(fullSummary)delete[] fullSummary;
fullSummary = new char[mSummaryInfo.totalSummaryBytes];
memcpy(fullSummary, headerTag, headerTagLen);
float *summary64K = (float *)(fullSummary + mSummaryInfo.offset64K);
float *summary256 = (float *)(fullSummary + mSummaryInfo.offset256);
float *fbuffer = new float[len];
CopySamples(buffer, format,
(samplePtr)fbuffer, floatSample, len);
sampleCount sumLen;
sampleCount i, j, jcount;
float min, max;
float sumsq;
// Recalc 256 summaries
sumLen = (len + 255) / 256;
for (i = 0; i < sumLen; i++) {
min = fbuffer[i * 256];
max = fbuffer[i * 256];
sumsq = ((float)min) * ((float)min);
jcount = 256;
if (i * 256 + jcount > len)
jcount = len - i * 256;
for (j = 1; j < jcount; j++) {
float f1 = fbuffer[i * 256 + j];
sumsq += ((float)f1) * ((float)f1);
if (f1 < min)
min = f1;
else if (f1 > max)
max = f1;
}
float rms = (float)sqrt(sumsq / jcount);
summary256[i * 3] = min;
summary256[i * 3 + 1] = max;
summary256[i * 3 + 2] = rms;
}
for (i = sumLen; i < mSummaryInfo.frames256; i++) {
// filling in the remaining bits with non-harming/contributing values
summary256[i * 3] = FLT_MAX; // min
summary256[i * 3 + 1] = -FLT_MAX; // max
summary256[i * 3 + 2] = 0.0f; // rms
}
// Recalc 64K summaries
sumLen = (len + 65535) / 65536;
for (i = 0; i < sumLen; i++) {
min = summary256[3 * i * 256];
max = summary256[3 * i * 256 + 1];
sumsq = (float)summary256[3 * i * 256 + 2];
sumsq *= sumsq;
for (j = 1; j < 256; j++) { // we can overflow the useful summary256 values here, but have put non-harmful values in them
if (summary256[3 * (i * 256 + j)] < min)
min = summary256[3 * (i * 256 + j)];
if (summary256[3 * (i * 256 + j) + 1] > max)
max = summary256[3 * (i * 256 + j) + 1];
float r1 = summary256[3 * (i * 256 + j) + 2];
sumsq += r1*r1;
}
float rms = (float)sqrt(sumsq / 256); // the '256' is not quite right at the edges as not all summary256 entries will be filled with useful values
summary64K[i * 3] = min;
summary64K[i * 3 + 1] = max;
summary64K[i * 3 + 2] = rms;
}
for (i = sumLen; i < mSummaryInfo.frames64K; i++) {
summary64K[i * 3] = 0.0f; // probably should be FLT_MAX, need a test case
summary64K[i * 3 + 1] = 0.0f; // probably should be -FLT_MAX, need a test case
summary64K[i * 3 + 2] = 0.0f;
}
// Recalc block-level summary
min = summary64K[0];
max = summary64K[1];
sumsq = (float)summary64K[2];
sumsq *= sumsq;
for (i = 1; i < sumLen; i++) {
if (summary64K[3*i] < min)
min = summary64K[3*i];
if (summary64K[3*i+1] > max)
max = summary64K[3*i+1];
float r1 = (float)summary64K[3*i+2];
sumsq += (r1*r1);
}
mMin = min;
mMax = max;
mRMS = sqrt(sumsq / sumLen);
delete[] fbuffer;
return fullSummary;
}
static void ComputeMinMax256(float *summary256,
float *outMin, float *outMax, int *outBads)
{
float min, max;
int i;
int bad = 0;
min = 1.0;
max = -1.0;
for(i=0; i<256; i++) {
if (summary256[3*i] < min)
min = summary256[3*i];
else if (!(summary256[3*i] >= min))
bad++;
if (summary256[3*i+1] > max)
max = summary256[3*i+1];
else if (!(summary256[3*i+1] <= max))
bad++;
if (wxIsNaN(summary256[3*i+2]))
bad++;
if (summary256[3*i+2] < -1 || summary256[3*i+2] > 1)
bad++;
}
*outMin = min;
*outMax = max;
*outBads = bad;
}
/// Byte-swap the summary data, in case it was saved by a system
/// on a different platform
void BlockFile::FixSummary(void *data)
{
if (mSummaryInfo.format != floatSample ||
mSummaryInfo.fields != 3)
return;
float *summary64K = (float *)((char *)data + mSummaryInfo.offset64K);
float *summary256 = (float *)((char *)data + mSummaryInfo.offset256);
float min, max;
int bad;
int i;
ComputeMinMax256(summary256, &min, &max, &bad);
if (min != summary64K[0] || max != summary64K[1] || bad > 0) {
unsigned int *buffer = (unsigned int *)data;
int len = mSummaryInfo.totalSummaryBytes / 4;
for(i=0; i<len; i++)
buffer[i] = wxUINT32_SWAP_ALWAYS(buffer[i]);
ComputeMinMax256(summary256, &min, &max, &bad);
if (min == summary64K[0] && max == summary64K[1] && bad == 0) {
// The byte-swapping worked!
return;
}
// Hmmm, no better, we should swap back
for(i=0; i<len; i++)
buffer[i] = wxUINT32_SWAP_ALWAYS(buffer[i]);
}
}
/// Retrieves the minimum, maximum, and maximum RMS of the
/// specified sample data in this block.
///
/// @param start The offset in this block where the region should begin
/// @param len The number of samples to include in the region
/// @param *outMin A pointer to where the minimum value for this region
/// should be stored
/// @param *outMax A pointer to where the maximum value for this region
/// should be stored
/// @param *outRMS A pointer to where the maximum RMS value for this
/// region should be stored.
void BlockFile::GetMinMax(sampleCount start, sampleCount len,
float *outMin, float *outMax, float *outRMS)
{
// TODO: actually use summaries
SampleBuffer blockData(len, floatSample);
this->ReadData(blockData.ptr(), floatSample, start, len);
float min = FLT_MAX;
float max = -FLT_MAX;
float sumsq = 0;
for( int i = 0; i < len; i++ )
{
float sample = ((float*)blockData.ptr())[i];
if( sample > max )
max = sample;
if( sample < min )
min = sample;
sumsq += (sample*sample);
}
*outMin = min;
*outMax = max;
*outRMS = sqrt(sumsq/len);
}
/// Retrieves the minimum, maximum, and maximum RMS of this entire
/// block. This is faster than the other GetMinMax function since
/// these values are already computed.
///
/// @param *outMin A pointer to where the minimum value for this block
/// should be stored
/// @param *outMax A pointer to where the maximum value for this block
/// should be stored
/// @param *outRMS A pointer to where the maximum RMS value for this
/// block should be stored.
void BlockFile::GetMinMax(float *outMin, float *outMax, float *outRMS)
{
*outMin = mMin;
*outMax = mMax;
*outRMS = mRMS;
}
/// Retrieves a portion of the 256-byte summary buffer from this BlockFile. This
/// data provides information about the minimum value, the maximum
/// value, and the maximum RMS value for every group of 256 samples in the
/// file.
///
/// @param *buffer The area where the summary information will be
/// written. It must be at least len*3 long.
/// @param start The offset in 256-sample increments
/// @param len The number of 256-sample summary frames to read
bool BlockFile::Read256(float *buffer,
sampleCount start, sampleCount len)
{
wxASSERT(start >= 0);
char *summary = new char[mSummaryInfo.totalSummaryBytes];
this->ReadSummary(summary);
if (start+len > mSummaryInfo.frames256)
len = mSummaryInfo.frames256 - start;
CopySamples(summary + mSummaryInfo.offset256 + (start * mSummaryInfo.bytesPerFrame),
mSummaryInfo.format,
(samplePtr)buffer, floatSample, len * mSummaryInfo.fields);
if (mSummaryInfo.fields == 2) {
// No RMS info
int i;
for(i=len-1; i>=0; i--) {
buffer[3*i+2] = (fabs(buffer[2*i]) + fabs(buffer[2*i+1]))/4.0;
buffer[3*i+1] = buffer[2*i+1];
buffer[3*i] = buffer[2*i];
}
}
delete[] summary;
return true;
}
/// Retrieves a portion of the 64K summary buffer from this BlockFile. This
/// data provides information about the minimum value, the maximum
/// value, and the maximum RMS value for every group of 64K samples in the
/// file.
///
/// @param *buffer The area where the summary information will be
/// written. It must be at least len*3 long.
/// @param start The offset in 64K-sample increments
/// @param len The number of 64K-sample summary frames to read
bool BlockFile::Read64K(float *buffer,
sampleCount start, sampleCount len)
{
wxASSERT(start >= 0);
char *summary = new char[mSummaryInfo.totalSummaryBytes];
this->ReadSummary(summary);
if (start+len > mSummaryInfo.frames64K)
len = mSummaryInfo.frames64K - start;
CopySamples(summary + mSummaryInfo.offset64K +
(start * mSummaryInfo.bytesPerFrame),
mSummaryInfo.format,
(samplePtr)buffer, floatSample, len*mSummaryInfo.fields);
if (mSummaryInfo.fields == 2) {
// No RMS info; make guess
int i;
for(i=len-1; i>=0; i--) {
buffer[3*i+2] = (fabs(buffer[2*i]) + fabs(buffer[2*i+1]))/4.0;
buffer[3*i+1] = buffer[2*i+1];
buffer[3*i] = buffer[2*i];
}
}
delete[] summary;
return true;
}
/// Constructs an AliasBlockFile based on the given information about
/// the aliased file.
///
/// Note that derived classes /must/ call AliasBlockFile::WriteSummary()
/// in their constructors for the summary file to be correctly written
/// to disk.
///
/// @param baseFileName The name of the summary file to be written, but
/// without an extension. This constructor will add
/// the appropriate extension before passing it to
/// BlockFile::BlockFile
/// @param aliasedFileName The name of the file where the audio data for
/// this block actually exists.
/// @param aliasStart The offset in the aliased file where this block's
/// data begins
/// @param aliasLen The length of this block's data in the aliased
/// file.
/// @param aliasChannel The channel where this block's data is located in
/// the aliased file
AliasBlockFile::AliasBlockFile(wxFileName baseFileName,
wxFileName aliasedFileName,
sampleCount aliasStart,
sampleCount aliasLen, int aliasChannel):
BlockFile(wxFileName(baseFileName.GetFullPath() + wxT(".auf")), aliasLen),
mAliasedFileName(aliasedFileName),
mAliasStart(aliasStart),
mAliasChannel(aliasChannel)
{
mSilentAliasLog=FALSE;
}
AliasBlockFile::AliasBlockFile(wxFileName existingSummaryFileName,
wxFileName aliasedFileName,
sampleCount aliasStart,
sampleCount aliasLen,
int aliasChannel,
float min, float max, float rms):
BlockFile(existingSummaryFileName, aliasLen),
mAliasedFileName(aliasedFileName),
mAliasStart(aliasStart),
mAliasChannel(aliasChannel)
{
mMin = min;
mMax = max;
mRMS = rms;
mSilentAliasLog=FALSE;
}
/// Write the summary to disk. Derived classes must call this method
/// from their constructors for the summary to be correctly written.
/// It uses the derived class's ReadData() to retrieve the data to
/// summarize.
void AliasBlockFile::WriteSummary()
{
// Now checked carefully in the DirManager
//wxASSERT( !wxFileExists(FILENAME(mFileName.GetFullPath())));
// I would much rather have this code as part of the constructor, but
// I can't call virtual functions from the constructor. So we just
// need to ensure that every derived class calls this in *its* constructor
wxFFile summaryFile(mFileName.GetFullPath(), wxT("wb"));
if( !summaryFile.IsOpened() ){
// Never silence the Log w.r.t write errors; they always count
// as NEW errors
wxLogError(wxT("Unable to write summary data to file %s"),
mFileName.GetFullPath().c_str());
// If we can't write, there's nothing to do.
return;
}
// To build the summary data, call ReadData (implemented by the
// derived classes) to get the sample data
SampleBuffer sampleData(mLen, floatSample);
this->ReadData(sampleData.ptr(), floatSample, 0, mLen);
void *summaryData = BlockFile::CalcSummary(sampleData.ptr(), mLen,
floatSample);
summaryFile.Write(summaryData, mSummaryInfo.totalSummaryBytes);
}
AliasBlockFile::~AliasBlockFile()
{
}
/// Read the summary of this alias block from disk. Since the audio data
/// is elsewhere, this consists of reading the entire summary file.
///
/// @param *data The buffer where the summary data will be stored. It must
/// be at least mSummaryInfo.totalSummaryBytes long.
bool AliasBlockFile::ReadSummary(void *data)
{
wxFFile summaryFile(mFileName.GetFullPath(), wxT("rb"));
wxLogNull *silence=0;
if(mSilentLog)silence= new wxLogNull();
if( !summaryFile.IsOpened() ){
// NEW model; we need to return valid data
memset(data,0,(size_t)mSummaryInfo.totalSummaryBytes);
if(silence) delete silence;
// we silence the logging for this operation in this object
// after first occurrence of error; it's already reported and
// spewing at the user will complicate the user's ability to
// deal
mSilentLog=TRUE;
return true;
}else mSilentLog=FALSE; // worked properly, any future error is NEW
if(silence) delete silence;
int read = summaryFile.Read(data, (size_t)mSummaryInfo.totalSummaryBytes);
FixSummary(data);
return (read == mSummaryInfo.totalSummaryBytes);
}
/// Modify this block to point at a different file. This is generally
/// looked down on, but it is necessary in one case: see
/// DirManager::EnsureSafeFilename().
void AliasBlockFile::ChangeAliasedFileName(wxFileName newAliasedFile)
{
mAliasedFileName = newAliasedFile;
}
wxLongLong AliasBlockFile::GetSpaceUsage()
{
wxFFile summaryFile(mFileName.GetFullPath());
return summaryFile.Length();
}
Reference in New Issue View Git Blame Copy Permalink