audacia/src/BatchCommandDialog.cpp

/**********************************************************************

  Audacity: A Digital Audio Editor

  BatchCommandDialog.cpp

  Dominic Mazzoni
  James Crook

*******************************************************************//*!

\class MacroCommandDialog
\brief Provides a list of configurable commands for use with MacroCommands

Provides a list of commands, mostly effects, which can be chained
together in a simple linear sequence.  Can configure parameters on each
selected command.

*//*******************************************************************/


#include "BatchCommandDialog.h"

#ifdef __WXMSW__
    #include  <wx/ownerdrw.h>
#endif

//
#include <wx/defs.h>
#include <wx/checkbox.h>
#include <wx/choice.h>
#include <wx/intl.h>
#include <wx/sizer.h>
#include <wx/statbox.h>
#include <wx/stattext.h>
#include <wx/textctrl.h>
#include <wx/listctrl.h>
#include <wx/radiobut.h>
#include <wx/button.h>
#include <wx/string.h>
#include <wx/dialog.h>


#include "Project.h"
#include "effects/EffectManager.h"
#include "ShuttleGui.h"
#include "widgets/HelpSystem.h"


#define CommandsListID        7001
#define EditParamsButtonID    7002
#define UsePresetButtonID     7003

BEGIN_EVENT_TABLE(MacroCommandDialog, wxDialogWrapper)
   EVT_BUTTON(wxID_OK,                     MacroCommandDialog::OnOk)
   EVT_BUTTON(wxID_CANCEL,                 MacroCommandDialog::OnCancel)
   EVT_BUTTON(wxID_HELP,                   MacroCommandDialog::OnHelp)
   EVT_BUTTON(EditParamsButtonID,          MacroCommandDialog::OnEditParams)
   EVT_BUTTON(UsePresetButtonID,           MacroCommandDialog::OnUsePreset)
   EVT_LIST_ITEM_ACTIVATED(CommandsListID, MacroCommandDialog::OnItemSelected)
   EVT_LIST_ITEM_SELECTED(CommandsListID,  MacroCommandDialog::OnItemSelected)
END_EVENT_TABLE();

MacroCommandDialog::MacroCommandDialog(
   wxWindow * parent, wxWindowID id, AudacityProject &project):
   wxDialogWrapper(parent, id, XO("Select Command"),
            wxDefaultPosition, wxDefaultSize,
            wxCAPTION | wxRESIZE_BORDER)
   , mCatalog{ &project }
{
   SetLabel(XO("Select Command"));         // Provide visual label
   SetName(XO("Select Command"));          // Provide audible label
   Populate();
}

void MacroCommandDialog::Populate()
{
   //------------------------- Main section --------------------
   ShuttleGui S(this, eIsCreating);
   PopulateOrExchange(S);
   // ----------------------- End of main section --------------
}

void MacroCommandDialog::PopulateOrExchange(ShuttleGui &S)
{
   S.StartVerticalLay(true);
   {
      S.StartMultiColumn(4, wxEXPAND);
      {
         S.SetStretchyCol(1);
         mCommand = S.AddTextBox(XXO("&Command"), wxT(""), 20);
         mCommand->SetEditable(false);
         mEditParams = S.Id(EditParamsButtonID)
            .Disable() // disable button as box is empty
            .AddButton(XXO("&Edit Parameters"));
         mUsePreset = S.Id(UsePresetButtonID)
            .Disable() // disable button as box is empty
            .AddButton(XXO("&Use Preset"));
      }
      S.EndMultiColumn();

      S.StartMultiColumn(2, wxEXPAND);
      {
         S.SetStretchyCol(1);
         mParameters = S.AddTextBox(XXO("&Parameters"), wxT(""), 0);
         mParameters->SetEditable(false);
         auto prompt = XXO("&Details");
         S.Prop(0).AddPrompt(prompt);
         mDetails = S
            .Name( prompt )
            .AddTextWindow( wxT(""));
         mDetails->SetEditable(false);
      }
      S.EndMultiColumn();

      S.Prop(10).StartStatic(XO("Choose command"), true);
      {
         mChoices = S.Id(CommandsListID)
            .Style(wxSUNKEN_BORDER | wxLC_LIST | wxLC_SINGLE_SEL)
            .AddListControl();
      }
      S.EndStatic();
   }
   S.EndVerticalLay();

   S.AddStandardButtons( eOkButton | eCancelButton | eHelpButton);

   PopulateCommandList();
   if (mChoices->GetItemCount() > 0) {
      // set first item to be selected (and the focus when the
      // list first becomes the focus)
      mChoices->SetItemState(0, wxLIST_STATE_FOCUSED | wxLIST_STATE_SELECTED,
         wxLIST_STATE_FOCUSED | wxLIST_STATE_SELECTED);
   }

   SetMinSize(wxSize(780, 560));
   Fit();
   Center();
}

void MacroCommandDialog::PopulateCommandList()
{
   mChoices->DeleteAllItems();
   long ii = 0;
   for ( const auto &entry : mCatalog )
      // insert the user-facing string
      mChoices->InsertItem( ii++, entry.name.StrippedTranslation() );
}

void MacroCommandDialog::ValidateChoices()
{
}

void MacroCommandDialog::OnChoice(wxCommandEvent & WXUNUSED(event))
{
}

void MacroCommandDialog::OnOk(wxCommandEvent & WXUNUSED(event))
{
   mSelectedCommand = mInternalCommandName
      // .Strip(wxString::both) // PRL: used to do this, here only,
         // but ultimately mSelectedCommand is looked up in the catalog without
         // similar adjustment of whitespace in the comparison
   ;
   mSelectedParameters = mParameters->GetValue().Strip(wxString::trailing);
   EndModal(true);
}

void MacroCommandDialog::OnCancel(wxCommandEvent & WXUNUSED(event))
{
   EndModal(false);
}

void MacroCommandDialog::OnHelp(wxCommandEvent & WXUNUSED(event))
{
   const auto &page = GetHelpPageName();
   HelpSystem::ShowHelp(this, page, true);
}

void MacroCommandDialog::OnItemSelected(wxListEvent &event)
{
   const auto &command = mCatalog[ event.GetIndex() ];

   EffectManager & em = EffectManager::Get();
   PluginID ID = em.GetEffectByIdentifier( command.name.Internal() );

   // If ID is empty, then the effect wasn't found, in which case, the user must have
   // selected one of the "special" commands.
   mEditParams->Enable(!ID.empty());
   mUsePreset->Enable(em.HasPresets(ID));

   auto value = command.name.StrippedTranslation();
   if ( value == mCommand->GetValue() )
      // This uses the assumption of uniqueness of translated names!
      return;

   mCommand->SetValue(value);
   mInternalCommandName = command.name.Internal();

   wxString params = MacroCommands::GetCurrentParamsFor(mInternalCommandName);
   if (params.empty())
   {
      params = em.GetDefaultPreset(ID);
   }

   // using GET to expose a CommandID to the user!
   // Cryptic command and category.
   // Later we can put help information there, perhaps.
   // Macro command details are one place that we do expose Identifier
   // to (more sophisticated) users
   mDetails->SetValue(
      mInternalCommandName.GET() + "\r\n" + command.category.Translation()  );
   mParameters->SetValue(params);
}

void MacroCommandDialog::OnEditParams(wxCommandEvent & WXUNUSED(event))
{
   auto command = mInternalCommandName;
   wxString params  = mParameters->GetValue();

   params = MacroCommands::PromptForParamsFor(command, params, *this).Trim();

   mParameters->SetValue(params);
   mParameters->Refresh();
}

void MacroCommandDialog::OnUsePreset(wxCommandEvent & WXUNUSED(event))
{
   auto command = mInternalCommandName;
   wxString params  = mParameters->GetValue();

   wxString preset = MacroCommands::PromptForPresetFor(command, params, this).Trim();

   mParameters->SetValue(preset);
   mParameters->Refresh();
}

void MacroCommandDialog::SetCommandAndParams(const CommandID &Command, const wxString &Params)
{
   auto iter = mCatalog.ByCommandId( Command );

   mParameters->SetValue( Params );

   mInternalCommandName = Command;
   if (iter == mCatalog.end())
      // uh oh, using GET to expose an internal name to the user!
      // in default of any better friendly name
      mCommand->SetValue( Command.GET() );
   else {
      mCommand->SetValue( iter->name.StrippedTranslation() );
      // using GET to expose a CommandID to the user!
      // Macro command details are one place that we do expose Identifier
      // to (more sophisticated) users
      mDetails->SetValue(
         iter->name.Internal() + "\r\n" + iter->category.Translation()  );
      mChoices->SetItemState(iter - mCatalog.begin(),
                             wxLIST_STATE_SELECTED, wxLIST_STATE_SELECTED);

      EffectManager & em = EffectManager::Get();
      PluginID ID = em.GetEffectByIdentifier(Command);

      // If ID is empty, then the effect wasn't found, in which case, the user must have
      // selected one of the "special" commands.
      mEditParams->Enable(!ID.empty());
      mUsePreset->Enable(em.HasPresets(ID));
   }
}