added mail configs

mail/dovecot/10-auth.conf

@@ -0,0 +1,128 @@
+##
+## Authentication processes
+##
+
+# Disable LOGIN command and all other plaintext authentications unless
+# SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP
+# matches the local IP (ie. you're connecting from the same computer), the
+# connection is considered secure and plaintext authentication is allowed.
+# See also ssl=required setting.
+disable_plaintext_auth = yes
+
+# Authentication cache size (e.g. 10M). 0 means it's disabled. Note that
+# bsdauth, PAM and vpopmail require cache_key to be set for caching to be used.
+#auth_cache_size = 0
+# Time to live for cached data. After TTL expires the cached record is no
+# longer used, *except* if the main database lookup returns internal failure.
+# We also try to handle password changes automatically: If user's previous
+# authentication was successful, but this one wasn't, the cache isn't used.
+# For now this works only with plaintext authentication.
+#auth_cache_ttl = 1 hour
+# TTL for negative hits (user not found, password mismatch).
+# 0 disables caching them completely.
+#auth_cache_negative_ttl = 1 hour
+
+# Space separated list of realms for SASL authentication mechanisms that need
+# them. You can leave it empty if you don't want to support multiple realms.
+# Many clients simply use the first one listed here, so keep the default realm
+# first.
+#auth_realms =
+
+# Default realm/domain to use if none was specified. This is used for both
+# SASL realms and appending @domain to username in plaintext logins.
+#auth_default_realm = 
+
+# List of allowed characters in username. If the user-given username contains
+# a character not listed in here, the login automatically fails. This is just
+# an extra check to make sure user can't exploit any potential quote escaping
+# vulnerabilities with SQL/LDAP databases. If you want to allow all characters,
+# set this value to empty.
+#auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@
+
+# Username character translations before it's looked up from databases. The
+# value contains series of from -> to characters. For example "#@/@" means
+# that '#' and '/' characters are translated to '@'.
+#auth_username_translation =
+
+# Username formatting before it's looked up from databases. You can use
+# the standard variables here, eg. %Lu would lowercase the username, %n would
+# drop away the domain if it was given, or "%n-AT-%d" would change the '@' into
+# "-AT-". This translation is done after auth_username_translation changes.
+#auth_username_format = %Lu
+
+# If you want to allow master users to log in by specifying the master
+# username within the normal username string (ie. not using SASL mechanism's
+# support for it), you can specify the separator character here. The format
+# is then <username><separator><master username>. UW-IMAP uses "*" as the
+# separator, so that could be a good choice.
+#auth_master_user_separator =
+
+# Username to use for users logging in with ANONYMOUS SASL mechanism
+#auth_anonymous_username = anonymous
+
+# Maximum number of dovecot-auth worker processes. They're used to execute
+# blocking passdb and userdb queries (eg. MySQL and PAM). They're
+# automatically created and destroyed as needed.
+#auth_worker_max_count = 30
+
+# Host name to use in GSSAPI principal names. The default is to use the
+# name returned by gethostname(). Use "$ALL" (with quotes) to allow all keytab
+# entries.
+#auth_gssapi_hostname =
+
+# Kerberos keytab to use for the GSSAPI mechanism. Will use the system
+# default (usually /etc/krb5.keytab) if not specified. You may need to change
+# the auth service to run as root to be able to read this file.
+#auth_krb5_keytab = 
+
+# Do NTLM and GSS-SPNEGO authentication using Samba's winbind daemon and
+# ntlm_auth helper. <doc/wiki/Authentication/Mechanisms/Winbind.txt>
+#auth_use_winbind = no
+
+# Path for Samba's ntlm_auth helper binary.
+#auth_winbind_helper_path = /usr/bin/ntlm_auth
+
+# Time to delay before replying to failed authentications.
+#auth_failure_delay = 2 secs
+
+# Require a valid SSL client certificate or the authentication fails.
+#auth_ssl_require_client_cert = no
+
+# Take the username from client's SSL certificate, using 
+# X509_NAME_get_text_by_NID() which returns the subject's DN's
+# CommonName. 
+#auth_ssl_username_from_cert = no
+
+# Space separated list of wanted authentication mechanisms:
+#   plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi otp skey
+#   gss-spnego
+# NOTE: See also disable_plaintext_auth setting.
+auth_mechanisms = plain login
+
+##
+## Password and user databases
+##
+
+#
+# Password database is used to verify user's password (and nothing more).
+# You can have multiple passdbs and userdbs. This is useful if you want to
+# allow both system users (/etc/passwd) and virtual users to login without
+# duplicating the system users into virtual database.
+#
+# <doc/wiki/PasswordDatabase.txt>
+#
+# User database specifies where mails are located and what user/group IDs
+# own them. For single-UID configuration use "static" userdb.
+#
+# <doc/wiki/UserDatabase.txt>
+
+#!include auth-deny.conf.ext
+#!include auth-master.conf.ext
+
+#!include auth-system.conf.ext
+#!include auth-sql.conf.ext
+#!include auth-ldap.conf.ext
+!include auth-passwdfile.conf.ext
+#!include auth-checkpassword.conf.ext
+#!include auth-vpopmail.conf.ext
+#!include auth-static.conf.ext

mail/dovecot/10-mail.conf

@@ -0,0 +1,371 @@
+##
+## Mailbox locations and namespaces
+##
+
+# Location for users' mailboxes. The default is empty, which means that Dovecot
+# tries to find the mailboxes automatically. This won't work if the user
+# doesn't yet have any mail, so you should explicitly tell Dovecot the full
+# location.
+#
+# If you're using mbox, giving a path to the INBOX file (eg. /var/mail/%u)
+# isn't enough. You'll also need to tell Dovecot where the other mailboxes are
+# kept. This is called the "root mail directory", and it must be the first
+# path given in the mail_location setting.
+#
+# There are a few special variables you can use, eg.:
+#
+#   %u - username
+#   %n - user part in user@domain, same as %u if there's no domain
+#   %d - domain part in user@domain, empty if there's no domain
+#   %h - home directory
+#
+# See doc/wiki/Variables.txt for full list. Some examples:
+#
+#   mail_location = maildir:~/Maildir
+#   mail_location = mbox:~/mail:INBOX=/var/mail/%u
+#   mail_location = mbox:/var/mail/%d/%1n/%n:INDEX=/var/indexes/%d/%1n/%n
+#
+# <doc/wiki/MailLocation.txt>
+#
+mail_location = maildir:/var/mail/%d/%n
+
+# If you need to set multiple mailbox locations or want to change default
+# namespace settings, you can do it by defining namespace sections.
+#
+# You can have private, shared and public namespaces. Private namespaces
+# are for user's personal mails. Shared namespaces are for accessing other
+# users' mailboxes that have been shared. Public namespaces are for shared
+# mailboxes that are managed by sysadmin. If you create any shared or public
+# namespaces you'll typically want to enable ACL plugin also, otherwise all
+# users can access all the shared mailboxes, assuming they have permissions
+# on filesystem level to do so.
+namespace inbox {
+  # Namespace type: private, shared or public
+  #type = private
+
+  # Hierarchy separator to use. You should use the same separator for all
+  # namespaces or some clients get confused. '/' is usually a good one.
+  # The default however depends on the underlying mail storage format.
+  #separator = 
+
+  # Prefix required to access this namespace. This needs to be different for
+  # all namespaces. For example "Public/".
+  #prefix = 
+
+  # Physical location of the mailbox. This is in same format as
+  # mail_location, which is also the default for it.
+  #location =
+
+  # There can be only one INBOX, and this setting defines which namespace
+  # has it.
+  inbox = yes
+
+  # If namespace is hidden, it's not advertised to clients via NAMESPACE
+  # extension. You'll most likely also want to set list=no. This is mostly
+  # useful when converting from another server with different namespaces which
+  # you want to deprecate but still keep working. For example you can create
+  # hidden namespaces with prefixes "~/mail/", "~%u/mail/" and "mail/".
+  #hidden = no
+
+  # Show the mailboxes under this namespace with LIST command. This makes the
+  # namespace visible for clients that don't support NAMESPACE extension.
+  # "children" value lists child mailboxes, but hides the namespace prefix.
+  #list = yes
+
+  # Namespace handles its own subscriptions. If set to "no", the parent
+  # namespace handles them (empty prefix should always have this as "yes")
+  #subscriptions = yes
+}
+
+# Example shared namespace configuration
+#namespace {
+  #type = shared
+  #separator = /
+
+  # Mailboxes are visible under "shared/user@domain/"
+  # %%n, %%d and %%u are expanded to the destination user.
+  #prefix = shared/%%u/
+
+  # Mail location for other users' mailboxes. Note that %variables and ~/
+  # expands to the logged in user's data. %%n, %%d, %%u and %%h expand to the
+  # destination user's data.
+  #location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u
+
+  # Use the default namespace for saving subscriptions.
+  #subscriptions = no
+
+  # List the shared/ namespace only if there are visible shared mailboxes.
+  #list = children
+#}
+# Should shared INBOX be visible as "shared/user" or "shared/user/INBOX"?
+#mail_shared_explicit_inbox = no
+
+# System user and group used to access mails. If you use multiple, userdb
+# can override these by returning uid or gid fields. You can use either numbers
+# or names. <doc/wiki/UserIds.txt>
+#mail_uid =
+#mail_gid =
+
+# Group to enable temporarily for privileged operations. Currently this is
+# used only with INBOX when either its initial creation or dotlocking fails.
+# Typically this is set to "mail" to give access to /var/mail.
+mail_privileged_group = mail
+
+# Grant access to these supplementary groups for mail processes. Typically
+# these are used to set up access to shared mailboxes. Note that it may be
+# dangerous to set these if users can create symlinks (e.g. if "mail" group is
+# set here, ln -s /var/mail ~/mail/var could allow a user to delete others'
+# mailboxes, or ln -s /secret/shared/box ~/mail/mybox would allow reading it).
+#mail_access_groups =
+
+# Allow full filesystem access to clients. There's no access checks other than
+# what the operating system does for the active UID/GID. It works with both
+# maildir and mboxes, allowing you to prefix mailboxes names with eg. /path/
+# or ~user/.
+#mail_full_filesystem_access = no
+
+# Dictionary for key=value mailbox attributes. Currently used by URLAUTH, but
+# soon intended to be used by METADATA as well.
+#mail_attribute_dict =
+
+##
+## Mail processes
+##
+
+# Don't use mmap() at all. This is required if you store indexes to shared
+# filesystems (NFS or clustered filesystem).
+#mmap_disable = no
+
+# Rely on O_EXCL to work when creating dotlock files. NFS supports O_EXCL
+# since version 3, so this should be safe to use nowadays by default.
+#dotlock_use_excl = yes
+
+# When to use fsync() or fdatasync() calls:
+#   optimized (default): Whenever necessary to avoid losing important data
+#   always: Useful with e.g. NFS when write()s are delayed
+#   never: Never use it (best performance, but crashes can lose data)
+#mail_fsync = optimized
+
+# Locking method for index files. Alternatives are fcntl, flock and dotlock.
+# Dotlocking uses some tricks which may create more disk I/O than other locking
+# methods. NFS users: flock doesn't work, remember to change mmap_disable.
+#lock_method = fcntl
+
+# Directory in which LDA/LMTP temporarily stores incoming mails >128 kB.
+#mail_temp_dir = /tmp
+
+# Valid UID range for users, defaults to 500 and above. This is mostly
+# to make sure that users can't log in as daemons or other system users.
+# Note that denying root logins is hardcoded to dovecot binary and can't
+# be done even if first_valid_uid is set to 0.
+first_valid_uid = 8
+#last_valid_uid = 0
+
+# Valid GID range for users, defaults to non-root/wheel. Users having
+# non-valid GID as primary group ID aren't allowed to log in. If user
+# belongs to supplementary groups with non-valid GIDs, those groups are
+# not set.
+#first_valid_gid = 1
+#last_valid_gid = 0
+
+# Maximum allowed length for mail keyword name. It's only forced when trying
+# to create new keywords.
+#mail_max_keyword_length = 50
+
+# ':' separated list of directories under which chrooting is allowed for mail
+# processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too).
+# This setting doesn't affect login_chroot, mail_chroot or auth chroot
+# settings. If this setting is empty, "/./" in home dirs are ignored.
+# WARNING: Never add directories here which local users can modify, that
+# may lead to root exploit. Usually this should be done only if you don't
+# allow shell access for users. <doc/wiki/Chrooting.txt>
+#valid_chroot_dirs = 
+
+# Default chroot directory for mail processes. This can be overridden for
+# specific users in user database by giving /./ in user's home directory
+# (eg. /home/./user chroots into /home). Note that usually there is no real
+# need to do chrooting, Dovecot doesn't allow users to access files outside
+# their mail directory anyway. If your home directories are prefixed with
+# the chroot directory, append "/." to mail_chroot. <doc/wiki/Chrooting.txt>
+#mail_chroot = 
+
+# UNIX socket path to master authentication server to find users.
+# This is used by imap (for shared users) and lda.
+#auth_socket_path = /var/run/dovecot/auth-userdb
+
+# Directory where to look up mail plugins.
+#mail_plugin_dir = /usr/lib/dovecot/modules
+
+# Space separated list of plugins to load for all services. Plugins specific to
+# IMAP, LDA, etc. are added to this list in their own .conf files.
+#mail_plugins = 
+
+##
+## Mailbox handling optimizations
+##
+
+# Mailbox list indexes can be used to optimize IMAP STATUS commands. They are
+# also required for IMAP NOTIFY extension to be enabled.
+#mailbox_list_index = no
+
+# The minimum number of mails in a mailbox before updates are done to cache
+# file. This allows optimizing Dovecot's behavior to do less disk writes at
+# the cost of more disk reads.
+#mail_cache_min_mail_count = 0
+
+# When IDLE command is running, mailbox is checked once in a while to see if
+# there are any new mails or other changes. This setting defines the minimum
+# time to wait between those checks. Dovecot can also use dnotify, inotify and
+# kqueue to find out immediately when changes occur.
+#mailbox_idle_check_interval = 30 secs
+
+# Save mails with CR+LF instead of plain LF. This makes sending those mails
+# take less CPU, especially with sendfile() syscall with Linux and FreeBSD.
+# But it also creates a bit more disk I/O which may just make it slower.
+# Also note that if other software reads the mboxes/maildirs, they may handle
+# the extra CRs wrong and cause problems.
+#mail_save_crlf = no
+
+# Max number of mails to keep open and prefetch to memory. This only works with
+# some mailbox formats and/or operating systems.
+#mail_prefetch_count = 0
+
+# How often to scan for stale temporary files and delete them (0 = never).
+# These should exist only after Dovecot dies in the middle of saving mails.
+#mail_temp_scan_interval = 1w
+
+##
+## Maildir-specific settings
+##
+
+# By default LIST command returns all entries in maildir beginning with a dot.
+# Enabling this option makes Dovecot return only entries which are directories.
+# This is done by stat()ing each entry, so it causes more disk I/O.
+# (For systems setting struct dirent->d_type, this check is free and it's
+# done always regardless of this setting)
+#maildir_stat_dirs = no
+
+# When copying a message, do it with hard links whenever possible. This makes
+# the performance much better, and it's unlikely to have any side effects.
+#maildir_copy_with_hardlinks = yes
+
+# Assume Dovecot is the only MUA accessing Maildir: Scan cur/ directory only
+# when its mtime changes unexpectedly or when we can't find the mail otherwise.
+#maildir_very_dirty_syncs = no
+
+# If enabled, Dovecot doesn't use the S=<size> in the Maildir filenames for
+# getting the mail's physical size, except when recalculating Maildir++ quota.
+# This can be useful in systems where a lot of the Maildir filenames have a
+# broken size. The performance hit for enabling this is very small.
+#maildir_broken_filename_sizes = no
+
+# Always move mails from new/ directory to cur/, even when the \Recent flags
+# aren't being reset.
+#maildir_empty_new = no
+
+##
+## mbox-specific settings
+##
+
+# Which locking methods to use for locking mbox. There are four available:
+#  dotlock: Create <mailbox>.lock file. This is the oldest and most NFS-safe
+#           solution. If you want to use /var/mail/ like directory, the users
+#           will need write access to that directory.
+#  dotlock_try: Same as dotlock, but if it fails because of permissions or
+#               because there isn't enough disk space, just skip it.
+#  fcntl  : Use this if possible. Works with NFS too if lockd is used.
+#  flock  : May not exist in all systems. Doesn't work with NFS.
+#  lockf  : May not exist in all systems. Doesn't work with NFS.
+#
+# You can use multiple locking methods; if you do the order they're declared
+# in is important to avoid deadlocks if other MTAs/MUAs are using multiple
+# locking methods as well. Some operating systems don't allow using some of
+# them simultaneously.
+#
+# The Debian value for mbox_write_locks differs from upstream Dovecot. It is
+# changed to be compliant with Debian Policy (section 11.6) for NFS safety.
+#       Dovecot: mbox_write_locks = dotlock fcntl
+#       Debian:  mbox_write_locks = fcntl dotlock
+#
+#mbox_read_locks = fcntl
+#mbox_write_locks = fcntl dotlock
+
+# Maximum time to wait for lock (all of them) before aborting.
+#mbox_lock_timeout = 5 mins
+
+# If dotlock exists but the mailbox isn't modified in any way, override the
+# lock file after this much time.
+#mbox_dotlock_change_timeout = 2 mins
+
+# When mbox changes unexpectedly we have to fully read it to find out what
+# changed. If the mbox is large this can take a long time. Since the change
+# is usually just a newly appended mail, it'd be faster to simply read the
+# new mails. If this setting is enabled, Dovecot does this but still safely
+# fallbacks to re-reading the whole mbox file whenever something in mbox isn't
+# how it's expected to be. The only real downside to this setting is that if
+# some other MUA changes message flags, Dovecot doesn't notice it immediately.
+# Note that a full sync is done with SELECT, EXAMINE, EXPUNGE and CHECK 
+# commands.
+#mbox_dirty_syncs = yes
+
+# Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE,
+# EXPUNGE or CHECK commands. If this is set, mbox_dirty_syncs is ignored.
+#mbox_very_dirty_syncs = no
+
+# Delay writing mbox headers until doing a full write sync (EXPUNGE and CHECK
+# commands and when closing the mailbox). This is especially useful for POP3
+# where clients often delete all mails. The downside is that our changes
+# aren't immediately visible to other MUAs.
+#mbox_lazy_writes = yes
+
+# If mbox size is smaller than this (e.g. 100k), don't write index files.
+# If an index file already exists it's still read, just not updated.
+#mbox_min_index_size = 0
+
+# Mail header selection algorithm to use for MD5 POP3 UIDLs when
+# pop3_uidl_format=%m. For backwards compatibility we use apop3d inspired
+# algorithm, but it fails if the first Received: header isn't unique in all
+# mails. An alternative algorithm is "all" that selects all headers.
+#mbox_md5 = apop3d
+
+##
+## mdbox-specific settings
+##
+
+# Maximum dbox file size until it's rotated.
+#mdbox_rotate_size = 2M
+
+# Maximum dbox file age until it's rotated. Typically in days. Day begins
+# from midnight, so 1d = today, 2d = yesterday, etc. 0 = check disabled.
+#mdbox_rotate_interval = 0
+
+# When creating new mdbox files, immediately preallocate their size to
+# mdbox_rotate_size. This setting currently works only in Linux with some
+# filesystems (ext4, xfs).
+#mdbox_preallocate_space = no
+
+##
+## Mail attachments
+##
+
+# sdbox and mdbox support saving mail attachments to external files, which
+# also allows single instance storage for them. Other backends don't support
+# this for now.
+
+# Directory root where to store mail attachments. Disabled, if empty.
+#mail_attachment_dir =
+
+# Attachments smaller than this aren't saved externally. It's also possible to
+# write a plugin to disable saving specific attachments externally.
+#mail_attachment_min_size = 128k
+
+# Filesystem backend to use for saving attachments:
+#  posix : No SiS done by Dovecot (but this might help FS's own deduplication)
+#  sis posix : SiS with immediate byte-by-byte comparison during saving
+#  sis-queue posix : SiS with delayed comparison and deduplication
+#mail_attachment_fs = sis posix
+
+# Hash format to use in attachment filenames. You can add any text and
+# variables: %{md4}, %{md5}, %{sha1}, %{sha256}, %{sha512}, %{size}.
+# Variables can be truncated, e.g. %{sha256:80} returns only first 80 bits
+#mail_attachment_hash = %{sha1}

mail/dovecot/10-master.conf

@@ -0,0 +1,123 @@
+#default_process_limit = 100
+#default_client_limit = 1000
+
+# Default VSZ (virtual memory size) limit for service processes. This is mainly
+# intended to catch and kill processes that leak memory before they eat up
+# everything.
+#default_vsz_limit = 256M
+
+# Login user is internally used by login processes. This is the most untrusted
+# user in Dovecot system. It shouldn't have access to anything at all.
+#default_login_user = dovenull
+
+# Internal user is used by unprivileged processes. It should be separate from
+# login user, so that login processes can't disturb other processes.
+#default_internal_user = dovecot
+
+service imap-login {
+  inet_listener imap {
+    #port = 143
+  }
+  inet_listener imaps {
+    #port = 993
+    #ssl = yes
+  }
+
+  # Number of connections to handle before starting a new process. Typically
+  # the only useful values are 0 (unlimited) or 1. 1 is more secure, but 0
+  # is faster. <doc/wiki/LoginProcess.txt>
+  #service_count = 1
+
+  # Number of processes to always keep waiting for more connections.
+  #process_min_avail = 0
+
+  # If you set service_count=0, you probably need to grow this.
+  #vsz_limit = $default_vsz_limit
+}
+
+service pop3-login {
+  inet_listener pop3 {
+    #port = 110
+  }
+  inet_listener pop3s {
+    #port = 995
+    #ssl = yes
+  }
+}
+
+service lmtp {
+  unix_listener /var/spool/postfix/private/dovecot-lmtp {
+    mode = 0666
+    group = postfix
+    user = postfix
+  }
+
+  # Create inet listener only if you can't use the above UNIX socket
+  #inet_listener lmtp {
+    # Avoid making LMTP visible for the entire internet
+    #address =
+    #port = 
+  #}
+}
+
+service imap {
+  # Most of the memory goes to mmap()ing files. You may need to increase this
+  # limit if you have huge mailboxes.
+  #vsz_limit = $default_vsz_limit
+
+  # Max. number of IMAP processes (connections)
+  #process_limit = 1024
+}
+
+service pop3 {
+  # Max. number of POP3 processes (connections)
+  #process_limit = 1024
+}
+
+service auth {
+  # auth_socket_path points to this userdb socket by default. It's typically
+  # used by dovecot-lda, doveadm, possibly imap process, etc. Users that have
+  # full permissions to this socket are able to get a list of all usernames and
+  # get the results of everyone's userdb lookups.
+  #
+  # The default 0666 mode allows anyone to connect to the socket, but the
+  # userdb lookups will succeed only if the userdb returns an "uid" field that
+  # matches the caller process's UID. Also if caller's uid or gid matches the
+  # socket's uid or gid the lookup succeeds. Anything else causes a failure.
+  #
+  # To give the caller full permissions to lookup all users, set the mode to
+  # something else than 0666 and Dovecot lets the kernel enforce the
+  # permissions (e.g. 0777 allows everyone full permissions).
+  unix_listener auth-userdb {
+    mode = 0600
+    user = mail
+    #group = 
+  }
+
+  # Postfix smtp-auth
+  unix_listener /var/spool/postfix/private/auth {
+    mode = 0666
+    user = postfix
+    group = postfix
+  }
+
+  # Auth process is run as this user.
+  user = dovecot
+}
+
+service auth-worker {
+  # Auth worker process is run as root by default, so that it can access
+  # /etc/shadow. If this isn't necessary, the user should be changed to
+  # $default_internal_user.
+  user = mail
+}
+
+service dict {
+  # If dict proxy is used, mail processes should have access to its socket.
+  # For example: mode=0660, group=vmail and global mail_access_groups=vmail
+  unix_listener dict {
+    #mode = 0600
+    #user = 
+    #group = 
+  }
+}

mail/dovecot/10-ssl.conf

@@ -0,0 +1,58 @@
+##
+## SSL settings
+##
+
+# SSL/TLS support: yes, no, required. <doc/wiki/SSL.txt>
+ssl = required
+
+# PEM encoded X.509 SSL/TLS certificate and private key. They're opened before
+# dropping root privileges, so keep the key file unreadable by anyone but
+# root. Included doc/mkcert.sh can be used to easily generate self-signed
+# certificate, just make sure to update the domains in dovecot-openssl.cnf
+ssl_cert = </etc/ssl/certs/dovecot.pem
+ssl_key = </etc/ssl/private/dovecot.pem
+
+# If key file is password protected, give the password here. Alternatively
+# give it when starting dovecot with -p parameter. Since this file is often
+# world-readable, you may want to place this setting instead to a different
+# root owned 0600 file by using ssl_key_password = <path.
+#ssl_key_password =
+
+# PEM encoded trusted certificate authority. Set this only if you intend to use
+# ssl_verify_client_cert=yes. The file should contain the CA certificate(s)
+# followed by the matching CRL(s). (e.g. ssl_ca = </etc/ssl/certs/ca.pem)
+#ssl_ca = 
+
+# Require that CRL check succeeds for client certificates.
+#ssl_require_crl = yes
+
+# Directory and/or file for trusted SSL CA certificates. These are used only
+# when Dovecot needs to act as an SSL client (e.g. imapc backend). The
+# directory is usually /etc/ssl/certs in Debian-based systems and the file is
+# /etc/pki/tls/cert.pem in RedHat-based systems.
+#ssl_client_ca_dir =
+#ssl_client_ca_file =
+
+# Request client to send a certificate. If you also want to require it, set
+# auth_ssl_require_client_cert=yes in auth section.
+#ssl_verify_client_cert = no
+
+# Which field from certificate to use for username. commonName and
+# x500UniqueIdentifier are the usual choices. You'll also need to set
+# auth_ssl_username_from_cert=yes.
+#ssl_cert_username_field = commonName
+
+# DH parameters length to use.
+#ssl_dh_parameters_length = 1024
+
+# SSL protocols to use
+#ssl_protocols = !SSLv2
+
+# SSL ciphers to use
+#ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL
+
+# Prefer the server's order of ciphers over client's.
+#ssl_prefer_server_ciphers = no
+
+# SSL crypto device to use, for valid values run "openssl engine"
+#ssl_crypto_device =

mail/dovecot/15-lda.conf

@@ -0,0 +1,48 @@
+##
+## LDA specific settings (also used by LMTP)
+##
+
+# Address to use when sending rejection mails.
+# Default is postmaster@<your domain>. %d expands to recipient domain.
+postmaster_address = postmaster@emersonveenstra.net
+
+# Hostname to use in various parts of sent mails (e.g. in Message-Id) and
+# in LMTP replies. Default is the system's real hostname@domain.
+#hostname = 
+
+# If user is over quota, return with temporary failure instead of
+# bouncing the mail.
+#quota_full_tempfail = no
+
+# Binary to use for sending mails.
+#sendmail_path = /usr/sbin/sendmail
+
+# If non-empty, send mails via this SMTP host[:port] instead of sendmail.
+#submission_host =
+
+# Subject: header to use for rejection mails. You can use the same variables
+# as for rejection_reason below.
+#rejection_subject = Rejected: %s
+
+# Human readable error message for rejection mails. You can use variables:
+#  %n = CRLF, %r = reason, %s = original subject, %t = recipient
+#rejection_reason = Your message to <%t> was automatically rejected:%n%r
+
+# Delimiter character between local-part and detail in email address.
+#recipient_delimiter = +
+
+# Header where the original recipient address (SMTP's RCPT TO: address) is taken
+# from if not available elsewhere. With dovecot-lda -a parameter overrides this. 
+# A commonly used header for this is X-Original-To.
+#lda_original_recipient_header =
+
+# Should saving a mail to a nonexistent mailbox automatically create it?
+#lda_mailbox_autocreate = no
+
+# Should automatically created mailboxes be also automatically subscribed?
+#lda_mailbox_autosubscribe = no
+
+protocol lda {
+  # Space separated list of plugins to load (default is global mail_plugins).
+  #mail_plugins = $mail_plugins
+}

mail/dovecot/20-imap.conf

@@ -0,0 +1,65 @@
+##
+## IMAP specific settings
+##
+
+# Maximum IMAP command line length. Some clients generate very long command
+# lines with huge mailboxes, so you may need to raise this if you get
+# "Too long argument" or "IMAP command line too large" errors often.
+#imap_max_line_length = 64k
+
+# IMAP logout format string:
+#  %i - total number of bytes read from client
+#  %o - total number of bytes sent to client
+#imap_logout_format = in=%i out=%o
+
+# Override the IMAP CAPABILITY response. If the value begins with '+',
+# add the given capabilities on top of the defaults (e.g. +XFOO XBAR).
+#imap_capability = 
+
+# How long to wait between "OK Still here" notifications when client is
+# IDLEing.
+#imap_idle_notify_interval = 2 mins
+
+# ID field names and values to send to clients. Using * as the value makes
+# Dovecot use the default value. The following fields have default values
+# currently: name, version, os, os-version, support-url, support-email.
+#imap_id_send = 
+
+# ID fields sent by client to log. * means everything.
+#imap_id_log =
+
+# Workarounds for various client bugs:
+#   delay-newmail:
+#     Send EXISTS/RECENT new mail notifications only when replying to NOOP
+#     and CHECK commands. Some clients ignore them otherwise, for example OSX
+#     Mail (<v2.1). Outlook Express breaks more badly though, without this it
+#     may show user "Message no longer in server" errors. Note that OE6 still
+#     breaks even with this workaround if synchronization is set to
+#     "Headers Only".
+#   tb-extra-mailbox-sep:
+#     Thunderbird gets somehow confused with LAYOUT=fs (mbox and dbox) and
+#     adds extra '/' suffixes to mailbox names. This option causes Dovecot to
+#     ignore the extra '/' instead of treating it as invalid mailbox name.
+#   tb-lsub-flags:
+#     Show \Noselect flags for LSUB replies with LAYOUT=fs (e.g. mbox).
+#     This makes Thunderbird realize they aren't selectable and show them
+#     greyed out, instead of only later giving "not selectable" popup error.
+#
+# The list is space-separated.
+#imap_client_workarounds = 
+
+# Host allowed in URLAUTH URLs sent by client. "*" allows all.
+#imap_urlauth_host =
+
+protocol imap {
+  # Space separated list of plugins to load (default is global mail_plugins).
+  mail_plugins = $mail_plugins antispam
+
+  # Maximum number of IMAP connections allowed for a user from each IP address.
+  # NOTE: The username is compared case-sensitively.
+  #mail_max_userip_connections = 10
+}
+
+protocol lmtp {
+	mail_plugins = $mail_plugins sieve
+}

mail/dovecot/auth-passwdfile.conf.ext

@@ -0,0 +1,15 @@
+# Authentication for passwd-file users. Included from 10-auth.conf.
+#
+# passwd-like file with specified location.
+# <doc/wiki/AuthDatabase.PasswdFile.txt>
+
+passdb {
+  driver = passwd-file
+  args = scheme=CRYPT username_format=%n /etc/dovecot/users
+}
+
+userdb {
+  driver = static
+  args = uid=mail gid=mail home=/var/mail/%d/%n
+}
+

mail/dovecot/dovecot.conf

@@ -0,0 +1,104 @@
+## Dovecot configuration file
+
+# If you're in a hurry, see http://wiki2.dovecot.org/QuickConfiguration
+
+# "doveconf -n" command gives a clean output of the changed settings. Use it
+# instead of copy&pasting files when posting to the Dovecot mailing list.
+
+# '#' character and everything after it is treated as comments. Extra spaces
+# and tabs are ignored. If you want to use either of these explicitly, put the
+# value inside quotes, eg.: key = "# char and trailing whitespace  "
+
+# Most (but not all) settings can be overridden by different protocols and/or
+# source/destination IPs by placing the settings inside sections, for example:
+# protocol imap { }, local 127.0.0.1 { }, remote 10.0.0.0/8 { }
+
+# Default values are shown for each setting, it's not required to uncomment
+# those. These are exceptions to this though: No sections (e.g. namespace {})
+# or plugin settings are added by default, they're listed only as examples.
+# Paths are also just examples with the real defaults being based on configure
+# options. The paths listed here are for configure --prefix=/usr
+# --sysconfdir=/etc --localstatedir=/var
+
+# Enable installed protocols
+!include_try /usr/share/dovecot/protocols.d/*.protocol
+
+# A comma separated list of IPs or hosts where to listen in for connections. 
+# "*" listens in all IPv4 interfaces, "::" listens in all IPv6 interfaces.
+# If you want to specify non-default ports or anything more complex,
+# edit conf.d/master.conf.
+#listen = *, ::
+
+# Base directory where to store runtime data.
+#base_dir = /var/run/dovecot/
+
+# Name of this instance. In multi-instance setup doveadm and other commands
+# can use -i <instance_name> to select which instance is used (an alternative
+# to -c <config_path>). The instance name is also added to Dovecot processes
+# in ps output.
+#instance_name = dovecot
+
+# Greeting message for clients.
+#login_greeting = Dovecot ready.
+
+# Space separated list of trusted network ranges. Connections from these
+# IPs are allowed to override their IP addresses and ports (for logging and
+# for authentication checks). disable_plaintext_auth is also ignored for
+# these networks. Typically you'd specify your IMAP proxy servers here.
+#login_trusted_networks =
+
+# Space separated list of login access check sockets (e.g. tcpwrap)
+#login_access_sockets = 
+
+# With proxy_maybe=yes if proxy destination matches any of these IPs, don't do
+# proxying. This isn't necessary normally, but may be useful if the destination
+# IP is e.g. a load balancer's IP.
+#auth_proxy_self =
+
+# Show more verbose process titles (in ps). Currently shows user name and
+# IP address. Useful for seeing who are actually using the IMAP processes
+# (eg. shared mailboxes or if same uid is used for multiple accounts).
+#verbose_proctitle = no
+
+# Should all processes be killed when Dovecot master process shuts down.
+# Setting this to "no" means that Dovecot can be upgraded without
+# forcing existing client connections to close (although that could also be
+# a problem if the upgrade is e.g. because of a security fix).
+#shutdown_clients = yes
+
+# If non-zero, run mail commands via this many connections to doveadm server,
+# instead of running them directly in the same process.
+#doveadm_worker_count = 0
+# UNIX socket or host:port used for connecting to doveadm server
+#doveadm_socket_path = doveadm-server
+
+# Space separated list of environment variables that are preserved on Dovecot
+# startup and passed down to all of its child processes. You can also give
+# key=value pairs to always set specific settings.
+#import_environment = TZ
+
+##
+## Dictionary server settings
+##
+
+# Dictionary can be used to store key=value lists. This is used by several
+# plugins. The dictionary can be accessed either directly or though a
+# dictionary server. The following dict block maps dictionary names to URIs
+# when the server is used. These can then be referenced using URIs in format
+# "proxy::<name>".
+
+dict {
+  #quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext
+  #expire = sqlite:/etc/dovecot/dovecot-dict-sql.conf.ext
+}
+
+# Most of the actual configuration gets included below. The filenames are
+# first sorted by their ASCII value and parsed in that order. The 00-prefixes
+# in filenames are intended to make it easier to understand the ordering.
+!include conf.d/*.conf
+
+# A config file can also tried to be included without giving an error if
+# it's not found:
+!include_try local.conf
+
+protocols = imap lmtp

mail/opendkim/KeyTable

@@ -0,0 +1,2 @@
+nodevine.net nodevine.net:nodevine:/etc/opendkim/nodevine.net.private
+emersonveenstra.net emersonveenstra.net:mail:/etc/opendkim/emersonveenstra.net.private

mail/opendkim/SigningTable

@@ -0,0 +1,2 @@
+*@nodevine.net nodevine.net
+*@emersonveenstra.net emersonveenstra.net

mail/opendkim/TrustedHosts

@@ -0,0 +1,2 @@
+127.0.0.1
+mail.nodevine.net

mail/opendkim/opendkim.conf

@@ -0,0 +1,18 @@
+Syslog			yes
+
+UMask			002
+
+ExternalIgnoreList refile:/etc/opendkim/TrustedHosts
+InternalHosts refile:/etc/opendkim/TrustedHosts
+KeyTable refile:/etc/opendkim/KeyTable
+LogWhy Yes
+SigningTable refile:/etc/opendkim/SigningTable
+SyslogSuccess yes
+
+Canonicalization	relaxed/relaxed
+Mode			sv
+
+OversignHeaders		From
+
+Socket inet:8891@localhost
+AlwaysAddARHeader y

mail/postfix/aliasen

@@ -0,0 +1,5 @@
+@emersonveenstra.net emerson@emersonveenstra.net
+@emersonveenstra.com emerson@emersonveenstra.net
+@scotrad.io emerson@emersonveenstra.net
+@nodevine.net emerson@emersonveenstra.net
+@emerson.sexy emerson@emersonveenstra.net

mail/postfix/client_checks

@@ -0,0 +1,9 @@
+# The qualifications for making it on this list of shame aren't really
+# objective, if I notice a lot of attempts, I'll look up the AS and see who owns
+# it, so it depends on what hosting provider it is (some are obvious spam fronts
+# or just don't care). Single IP addresses only make it on here if they attempt
+# to use me as a relay or bruteforce me.
+107.173.4.0/24 REJECT Rejected due to excessive spam from your ISP. If in error, email abuse@nodevine.net from a commonly used email service such as Gmail with details.
+112.90.183.0/24 REJECT Rejected due to excessive spam from your ISP. If in error, email abuse@nodevine.net from a commonly used email service such as Gmail with details.
+82.196.20.0/24 REJECT Rejected due to excessive spam from your ISP. If in error, email abuse@nodevine.net from a commonly used email service such as Gmail with details.
+112.90.183.139 REJECT Rejected due to excessive spam from your ISP. If in error, email abuse@nodevine.net from a commonly used email service such as Gmail with details.

mail/postfix/mailboxen

@@ -0,0 +1 @@
+emerson@emersonveenstra.net whatever

mail/postfix/main.cf

@@ -0,0 +1,78 @@
+smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
+biff = no
+
+# appending .domain is the MUA's job.
+append_dot_mydomain = no
+
+# Uncomment the next line to generate "delayed mail" warnings
+#delay_warning_time = 4h
+
+readme_directory = no
+
+# TLS parameters
+# TODO: Find out if we can tweak this cache stuff
+# OTHERTODO: Figure out TLS warnings when sending mail
+smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
+smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
+smtpd_tls_cert_file = /home/emerson/tls/mail-cert.crt
+smtpd_tls_key_file = /home/emerson/tls/mail-cert.key
+
+# TODO: same thing, haven't looked into this very much
+smtpd_use_tls = yes
+smtpd_tls_auth_only = yes
+smtp_tls_security_level=may
+smtp_tls_loglevel=2
+smtpd_tls_received_header=yes
+
+smtpd_delay_reject = yes
+smtpd_helo_required = yes
+smtpd_helo_restrictions =
+    permit_mynetworks,
+    reject_non_fqdn_helo_hostname,
+    reject_invalid_helo_hostname,
+    reject_unknown_helo_hostname,
+    permit
+
+smtpd_sender_restrictions =
+    permit_sasl_authenticated,
+    permit_mynetworks,
+    reject_non_fqdn_sender,
+    reject_unknown_sender_domain,
+    permit
+
+smtpd_sasl_type = dovecot
+smtpd_sasl_path = private/auth
+smtpd_sasl_auth_enable = yes
+
+# port 10023 is postgrey
+smtpd_recipient_restrictions=
+    permit_sasl_authenticated,
+    permit_mynetworks,
+    reject_unauth_destination,
+    check_client_access cidr:/etc/postfix/client_checks,
+    check_policy_service inet:127.0.0.1:10023
+
+smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination
+myhostname = mail.nodevine.net
+alias_maps = hash:/etc/aliases
+alias_database = hash:/etc/aliases
+myorigin = /etc/mailname
+mydestination = localhost
+relayhost = 
+mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
+mailbox_size_limit = 0
+message_size_limit = 20480000
+recipient_delimiter = +
+inet_interfaces = all
+
+virtual_transport = lmtp:unix:private/dovecot-lmtp
+virtual_mailbox_domains = emersonveenstra.net, emersonveenstra.com, nodevine.net, scotrad.io, emerson.sexy
+virtual_mailbox_maps = hash:/etc/postfix/mailboxen
+virtual_alias_maps = hash:/etc/postfix/aliases
+local_recipient_maps = $virtual_mailbox_maps
+
+#OpenDKIM
+smtpd_milters=inet:localhost:8891
+non_smtpd_milters=$smtpd_milters
+milter_default_action=accept
+smtpd_client_restrictions = permit_sasl_authenticated

mail/postfix/master.cf

@@ -0,0 +1,126 @@
+#
+# Postfix master process configuration file.  For details on the format
+# of the file, see the master(5) manual page (command: "man 5 master" or
+# on-line: http://www.postfix.org/master.5.html).
+#
+# Do not forget to execute "postfix reload" after editing this file.
+#
+# ==========================================================================
+# service type  private unpriv  chroot  wakeup  maxproc command + args
+#               (yes)   (yes)   (yes)   (never) (100)
+# ==========================================================================
+smtp      inet  n       -       -       -       -       smtpd
+#smtp      inet  n       -       -       -       1       postscreen
+#smtpd     pass  -       -       -       -       -       smtpd
+#dnsblog   unix  -       -       -       -       0       dnsblog
+#tlsproxy  unix  -       -       -       -       0       tlsproxy
+submission inet n       -       -       -       -       smtpd
+  -o syslog_name=postfix/submission
+  -o smtpd_tls_security_level=encrypt
+  -o smtpd_sasl_auth_enable=yes
+#  -o smtpd_reject_unlisted_recipient=no
+  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
+#  -o smtpd_helo_restrictions=$mua_helo_restrictions
+#  -o smtpd_sender_restrictions=$mua_sender_restrictions
+#  -o smtpd_recipient_restrictions=
+#  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
+#  -o milter_macro_daemon_name=ORIGINATING
+smtps     inet  n       -       -       -       -       smtpd
+#  -o syslog_name=postfix/smtps
+  -o smtpd_tls_wrappermode=yes
+  -o smtpd_sasl_auth_enable=yes
+#  -o smtpd_reject_unlisted_recipient=no
+#  -o smtpd_client_restrictions=$mua_client_restrictions
+#  -o smtpd_helo_restrictions=$mua_helo_restrictions
+#  -o smtpd_sender_restrictions=$mua_sender_restrictions
+#  -o smtpd_recipient_restrictions=
+#  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
+#  -o milter_macro_daemon_name=ORIGINATING
+#628       inet  n       -       -       -       -       qmqpd
+pickup    unix  n       -       -       60      1       pickup
+cleanup   unix  n       -       -       -       0       cleanup
+qmgr      unix  n       -       n       300     1       qmgr
+#qmgr     unix  n       -       n       300     1       oqmgr
+tlsmgr    unix  -       -       -       1000?   1       tlsmgr
+rewrite   unix  -       -       -       -       -       trivial-rewrite
+bounce    unix  -       -       -       -       0       bounce
+defer     unix  -       -       -       -       0       bounce
+trace     unix  -       -       -       -       0       bounce
+verify    unix  -       -       -       -       1       verify
+flush     unix  n       -       -       1000?   0       flush
+proxymap  unix  -       -       n       -       -       proxymap
+proxywrite unix -       -       n       -       1       proxymap
+smtp      unix  -       -       -       -       -       smtp
+relay     unix  -       -       -       -       -       smtp
+#       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
+showq     unix  n       -       -       -       -       showq
+error     unix  -       -       -       -       -       error
+retry     unix  -       -       -       -       -       error
+discard   unix  -       -       -       -       -       discard
+local     unix  -       n       n       -       -       local
+virtual   unix  -       n       n       -       -       virtual
+lmtp      unix  -       -       -       -       -       lmtp
+anvil     unix  -       -       -       -       1       anvil
+scache    unix  -       -       -       -       1       scache
+#
+# ====================================================================
+# Interfaces to non-Postfix software. Be sure to examine the manual
+# pages of the non-Postfix software to find out what options it wants.
+#
+# Many of the following services use the Postfix pipe(8) delivery
+# agent.  See the pipe(8) man page for information about ${recipient}
+# and other message envelope options.
+# ====================================================================
+#
+# maildrop. See the Postfix MAILDROP_README file for details.
+# Also specify in main.cf: maildrop_destination_recipient_limit=1
+#
+maildrop  unix  -       n       n       -       -       pipe
+  flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
+#
+# ====================================================================
+#
+# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
+#
+# Specify in cyrus.conf:
+#   lmtp    cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
+#
+# Specify in main.cf one or more of the following:
+#  mailbox_transport = lmtp:inet:localhost
+#  virtual_transport = lmtp:inet:localhost
+#
+# ====================================================================
+#
+# Cyrus 2.1.5 (Amos Gouaux)
+# Also specify in main.cf: cyrus_destination_recipient_limit=1
+#
+#cyrus     unix  -       n       n       -       -       pipe
+#  user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
+#
+# ====================================================================
+# Old example of delivery via Cyrus.
+#
+#old-cyrus unix  -       n       n       -       -       pipe
+#  flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
+#
+# ====================================================================
+#
+# See the Postfix UUCP_README file for configuration details.
+#
+uucp      unix  -       n       n       -       -       pipe
+  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
+#
+# Other external delivery methods.
+#
+ifmail    unix  -       n       n       -       -       pipe
+  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
+bsmtp     unix  -       n       n       -       -       pipe
+  flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
+scalemail-backend unix	-	n	n	-	2	pipe
+  flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
+mailman   unix  -       n       n       -       -       pipe
+  flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
+  ${nexthop} ${user}
+
+dovecot   unix  -       n       n       -       -       pipe
+  flags=DRhu user=mail:mail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${recipient}

mail/postgrey/whitelist_clients

@@ -0,0 +1,19 @@
+# These are quite broad, but the chance of getting a false positive is quite
+# low, and I'd rather not have to mess around with regexing a bunch of times.
+outlook.com
+google.com
+facebook.com
+slack.com
+amazonses.com
+republicwireless.com
+jivesoftware.com
+zdsys.com
+mandrillapp.com
+directly.com
+customeriomail.com
+microsoftemail.com
+sendgrid.net
+stripe.com
+amazonses.com
+cloudatcost.com
+bankofamerica.com