dotfiles/.config/aerc/aerc.conf

#
# aerc main configuration

[general]
#
# Used as a default path for save operations if no other path is specified.
# ~ is expanded to the current user home dir.
#
#default-save-path=

# If set to "gpg", aerc will use system gpg binary and keystore for all crypto
# operations. If set to "internal", the internal openpgp keyring will be used.
# If set to "auto", the system gpg will be preferred unless the internal
# keyring already exists, in which case the latter will be used.
#
# Default: auto
#pgp-provider=auto

# By default, the file permissions of accounts.conf must be restrictive and
# only allow reading by the file owner (0600). Set this option to true to
# ignore this permission check. Use this with care as it may expose your
# credentials.
#
# Default: false
#unsafe-accounts-conf=false

# Output log messages to specified file. A path starting with ~/ is expanded to
# the user home dir. When redirecting aerc's output to a file using > shell
# redirection, this setting is ignored and log messages are printed to stdout.
#
#log-file=

# Only log messages above the specified level to log-file. Supported levels
# are: trace, debug, info, warn and error. When redirecting aerc's output to
# a file using > shell redirection, this setting is ignored and the log level
# is forced to trace.
#
# Default: info
#log-level=info

[ui]
#
# Describes the format for each row in a mailbox view. This is a comma
# separated list of column names with an optional align and width suffix. After
# the column name, one of the '<' (left), ':' (center) or '>' (right) alignment
# characters can be added (by default, left) followed by an optional width
# specifier. The width is either an integer representing a fixed number of
# characters, or a percentage between 1% and 99% representing a fraction of the
# terminal width. It can also be one of the '*' (auto) or '=' (fit) special
# width specifiers. Auto width columns will be equally attributed the remaining
# terminal width. Fit width columns take the width of their contents. If no
# width specifier is set, '*' is used by default.
#
# Default: date<20,name<17,flags>4,subject<*
#index-columns=date<20,name<17,flags>4,subject<*

#
# Each name in index-columns must have a corresponding column-$name setting.
# All column-$name settings accept golang text/template syntax. See
# aerc-templates(7) for available template attributes and functions.
#
# Default settings
#column-date={{.DateAutoFormat .Date.Local}}
#column-name={{index (.From | names) 0}}
#column-flags={{.Flags | join ""}}
#column-subject={{.Subject}}

#
# String separator inserted between columns. When the column width specifier is
# an exact number of characters, the separator is added to it (i.e. the exact
# width will be fully available for the column contents).
#
# Default: "  "
#column-separator="  "

#
# See time.Time#Format at https://godoc.org/time#Time.Format
#
# Default: 2006-01-02 03:04 PM (ISO 8601 + 12 hour time)
#timestamp-format=2006-01-02 03:04 PM

#
# Index-only time format for messages that were received/sent today.
# If this is not specified, timestamp-format is used instead.
#
#this-day-time-format=

#
# Index-only time format for messages that were received/sent within the last
# 7 days. If this is not specified, timestamp-format is used instead.
#
#this-week-time-format=

#
# Index-only time format for messages that were received/sent this year.
# If this is not specified, timestamp-format is used instead.
#
#this-year-time-format=

#
# Width of the sidebar, including the border.
#
# Default: 20
#sidebar-width=20

#
# Message to display when viewing an empty folder.
#
# Default: (no messages)
#empty-message=(no messages)

# Message to display when no folders exists or are all filtered
#
# Default: (no folders)
#empty-dirlist=(no folders)

# Enable mouse events in the ui, e.g. clicking and scrolling with the mousewheel
#
# Default: false
#mouse-enabled=false

#
# Ring the bell when new messages are received
#
# Default: true
#new-message-bell=true

# Marker to show before a pinned tab's name.
#
# Default: `
#pinned-tab-marker='`'

# Describes the format string to use for the directory list
#
# Default: %n %>r
#dirlist-format=%n %>r

# Delay after which the messages are actually listed when entering a directory.
# This avoids loading messages when skipping over folders and makes the UI more
# responsive. If you do not want that, set it to 0s.
#
# Default: 200ms
#dirlist-delay=200ms

# Display the directory list as a foldable tree that allows to collapse and
# expand the folders.
#
# Default: false
#dirlist-tree=false

# If dirlist-tree is enabled, set level at which folders are collapsed by
# default. Set to 0 to disable.
#
# Default: 0
#dirlist-collapse=0

# List of space-separated criteria to sort the messages by, see *sort*
# command in *aerc*(1) for reference. Prefixing a criterion with "-r "
# reverses that criterion.
#
# Example: "from -r date"
#
#sort=

# Moves to next message when the current message is deleted
#
# Default: true
#next-message-on-delete=true

# Automatically set the "seen" flag when a message is opened in the message
# viewer.
#
# Default: true
#auto-mark-read=true

# The directories where the stylesets are stored. It takes a colon-separated
# list of directories. If this is unset or if a styleset cannot be found, the
# following paths will be used as a fallback in that order:
#
#   ${XDG_CONFIG_HOME:-~/.config}/aerc/stylesets
#   ${XDG_DATA_HOME:-~/.local/share}/aerc/stylesets
#   /usr/local/share/aerc/stylesets
#   /usr/share/aerc/stylesets
#
#stylesets-dirs=

# Uncomment to use box-drawing characters for vertical and horizontal borders.
#
# Default: " "
#border-char-vertical=" "
#border-char-horizontal=" "

# Sets the styleset to use for the aerc ui elements.
#
# Default: default
styleset-name=dracula

# Activates fuzzy search in commands and their arguments: the typed string is
# searched in the command or option in any position, and need not be
# consecutive characters in the command or option.
#
# Default: false
#fuzzy-complete=false

# How long to wait after the last input before auto-completion is triggered.
#
# Default: 250ms
#completion-delay=250ms

# The minimum required characters to allow auto-completion to be triggered after
# completion-delay.
#
# Default: 1
#completion-min-chars=1

#
# Global switch for completion popovers
#
# Default: true
#completion-popovers=true

# Uncomment to use UTF-8 symbols to indicate PGP status of messages
#
# Default: ASCII
#icon-unencrypted=
#icon-encrypted=✔
#icon-signed=✔
#icon-signed-encrypted=✔
#icon-unknown=✘
#icon-invalid=⚠

# Reverses the order of the message list. By default, the message list is
# ordered with the newest (highest UID) message on top. Reversing the order
# will put the oldest (lowest UID) message on top. This can be useful in cases
# where the backend does not support sorting.
#
# Default: false
#reverse-msglist-order = false

# Reverse display of the mesage threads. Default order is the the intial
# message is on the top with all the replies being displayed below. The
# reverse option will put the initial message at the bottom with the
# replies on top.
#
# Default: false
#reverse-thread-order=false

# Sort the thread siblings according to the sort criteria for the messages. If
# sort-thread-siblings is false, the thread siblings will be sorted based on
# the message UID in ascending order. This option is only applicable for
# client-side threading with a backend that enables sorting. Note that there's
# a performance impact when sorting is activated.
#
# Default: false
#sort-thread-siblings=false

#[ui:account=foo]
#
# Enable a threaded view of messages. If this is not supported by the backend
# (IMAP server or notmuch), threads will be built by the client.
#
# Default: false
threading-enabled=false

# Force client-side thread building
#
# Default: false
#force-client-threads=false

# Debounce client-side thread building
#
# Default: 50ms
#client-threads-delay=50ms

[statusline]
# Describes the format string for the statusline.
#
# Default: [%a] %S %>%T
#render-format=[%a] %S %>%T

# Specifies the separator between grouped statusline elements.
#
# Default: " | "
#separator=" | "

# Defines the mode for displaying the status elements.
# Options: text, icon
#
# Default: text
#display-mode=text

[viewer]
#
# Specifies the pager to use when displaying emails. Note that some filters
# may add ANSI codes to add color to rendered emails, so you may want to use a
# pager which supports ANSI codes.
#
# Default: less -R
#pager=less -R

#
# If an email offers several versions (multipart), you can configure which
# mimetype to prefer. For example, this can be used to prefer plaintext over
# html emails.
#
# Default: text/plain,text/html
#alternatives=text/plain,text/html

#
# Default setting to determine whether to show full headers or only parsed
# ones in message viewer.
#
# Default: false
#show-headers=false

#
# Layout of headers when viewing a message. To display multiple headers in the
# same row, separate them with a pipe, e.g. "From|To". Rows will be hidden if
# none of their specified headers are present in the message.
#
# Default: From|To,Cc|Bcc,Date,Subject
#header-layout=From|To,Cc|Bcc,Date,Subject

# Whether to always show the mimetype of an email, even when it is just a single part
#
# Default: false
#always-show-mime=false

# Parses and extracts http links when viewing a message. Links can then be
# accessed with the open-link command.
#
# Default: true
#parse-http-links=true

[compose]
#
# Specifies the command to run the editor with. It will be shown in an embedded
# terminal, though it may also launch a graphical window if the environment
# supports it. Defaults to $EDITOR, or vi.
#editor=

#
# Default header fields to display when composing a message. To display
# multiple headers in the same row, separate them with a pipe, e.g. "To|From".
#
# Default: To|From,Subject
#header-layout=To|From,Subject

#
# Specifies the command to be used to tab-complete email addresses. Any
# occurrence of "%s" in the address-book-cmd will be replaced with what the
# user has typed so far.
#
# The command must output the completions to standard output, one completion
# per line. Each line must be tab-delimited, with an email address occurring as
# the first field. Only the email address field is required. The second field,
# if present, will be treated as the contact name. Additional fields are
# ignored.
#
# This parameter can also be set per account in accounts.conf.
#address-book-cmd=

# Specifies the command to be used to select attachments. Any occurence of '%s'
# in the file-picker-cmd will be replaced the argument <arg> to :attach -m
# <arg>.
#
# The command must output the selected files to standard output, one file per
# line.
#file-picker-cmd=

#
# Allow to address yourself when replying
#
# Default: true
#reply-to-self=true

#
# Warn before sending an email that matches the specified regexp but does not
# have any attachments. Leave empty to disable this feature.
#
# Uses Go's regexp syntax, documented at https://golang.org/s/re2syntax. The
# "(?im)" flags are set by default (case-insensitive and multi-line).
#
# Example:
# no-attachment-warning=^[^>]*attach(ed|ment)
#
#no-attachment-warning=

[multipart-converters]
#
# Converters allow to generate multipart/alternative messages by converting the
# main text/plain part into any other MIME type. Only exact MIME types are
# accepted. The commands are invoked with sh -c and are expected to output
# valid UTF-8 text.
#
# Example (obviously, this requires that you write your main text/plain body
# using the markdown syntax):
#text/html=pandoc -f markdown -t html --standalone

[filters]
#
# Filters allow you to pipe an email body through a shell command to render
# certain emails differently, e.g. highlighting them with ANSI escape codes.
#
# The commands are invoked with sh -c. The following folders are appended to
# the system $PATH to allow referencing filters from their name only:
#
#   ${XDG_CONFIG_HOME:-~/.config}/aerc/filters
#   ${XDG_DATA_HOME:-~/.local/share}/aerc/filters
#   $PREFIX/share/aerc/filters
#   /usr/share/aerc/filters
#
# The following variables are defined in the filter command environment:
#
#   AERC_MIME_TYPE      the part MIME type/subtype
#   AERC_FORMAT         the part content type format= parameter
#   AERC_FILENAME       the attachment filename (if any)
#   AERC_SUBJECT        the message Subject header value
#   AERC_FROM           the message From header value
#
# The first filter which matches the email's mimetype will be used, so order
# them from most to least specific.
#
# You can also match on non-mimetypes, by prefixing with the header to match
# against (non-case-sensitive) and a comma, e.g. subject,text will match a
# subject which contains "text". Use header,~regex to match against a regex.
#
text/plain=colorize
text/calendar=calendar
message/delivery-status=colorize
message/rfc822=colorize
text/html=pandoc -f html -t plain | colorize
#text/html=html | colorize
#text/*=bat -fP --file-name="$AERC_FILENAME"
#application/x-sh=bat -fP -l sh
#image/*=catimg -w $(tput cols) -
#subject,~Git(hub|lab)=lolcat -f
#from,thatguywhodoesnothardwraphismessages=wrap -w 100 | colorize

[openers]
#
# Openers allow you to specify the command to use for the :open action on a
# per-MIME-type basis.
#
# {} is expanded as the temporary filename to be opened. If it is not
# encountered in the command, the temporary filename will be appened to the end
# of the command.
#
# Examples:
# text/html=surf -dfgms
# text/plain=gvim {} +125
# message/rfc822=thunderbird

[triggers]
#
# Triggers specify commands to execute when certain events occur.
#
# Example:
# new-email=exec notify-send "New email from %n" "%s"

#
# Executed when a new email arrives in the selected folder
#new-email=

[templates]
# Templates are used to populate email bodies automatically.
#

# The directories where the templates are stored. It takes a colon-separated
# list of directories. If this is unset or if a template cannot be found, the
# following paths will be used as a fallback in that order:
#
#   ${XDG_CONFIG_HOME:-~/.config}/aerc/templates
#   ${XDG_DATA_HOME:-~/.local/share}/aerc/templates
#   /usr/local/share/aerc/templates
#   /usr/share/aerc/templates
#
#template-dirs=

# The default template to be used for new messages.
#
# default: new_message
#new-message=new_message

# The default template to be used for quoted replies.
#
# default: quoted_reply
#quoted-reply=quoted_reply

# The default template to be used for forward as body.
#
# default: forward_as_body
#forwards=forward_as_body