d59589bf9e
Added status_unk to battery_info
2016-03-21 22:41:22 +00:00
a8aa5d608c
Adding glob check to cpu temperature fixes #55
2016-03-20 11:47:56 +01:00
430b053326
This removes the 'remaining' time when the battery is full, since the remaining time is always 00:00:00. When the battery is discharging, the remaining time will show up again if the user has set their format correctly.
2016-01-25 00:38:13 -08:00
dd75c260f8
revert back to using nanosleep
...
Fixes #93
2016-01-12 11:46:42 -02:00
fad9c8237c
Bugfix: check that format_not_mounted is not NULL before using it
...
This issue was introduced with commit 75a83574fixes #92
2016-01-12 09:50:44 +01:00
b54623a56d
format detection: recognise swaybar
2015-12-27 15:59:32 +11:00
dcd0518e25
Added support for Pango markup.
2015-12-04 10:27:18 -08:00
876c1cef8d
fix compilation on FreeBSD
...
fixes #83
2015-11-24 19:26:07 +01:00
3e14e6e5f3
first_eth_interface: ignore MAC addresses, look for IPv4/IPv6 addresses
2015-11-16 22:41:18 +01:00
9e6e0d4f8f
Correctly calculate Wireless link quality
...
Wireless quality was stuck at 100% due to
a signed with unsigned integer division.
2015-10-12 20:46:22 +02:00
611e863ace
Volume percentage should be obtained by float division and rounded to int.
...
Fixes #75
2015-10-12 09:44:13 +02:00
1935110ef3
Merge pull request #71 from bsdjhb/freebsd_wifi_buildfix
...
Fix build under FreeBSD after recent changes for Linux.
2015-10-09 09:11:16 -07:00
9ebde24df1
Fix build under FreeBSD after recent changes for Linux.
2015-10-08 13:20:02 -07:00
5e33d9fe74
Properly detect the battery charging status under FreeBSD.
...
The hw.acpi.battery.state sysctl returns a bitmask of flags as
defined in <dev/acpica/acpiio.h>. Use constants from this header
to examine the state and check for the charging flag to determine
if the battery is charging.
2015-10-08 13:15:38 -07:00
a13b2e7288
Added support for lemonbar
2015-10-04 14:52:32 -04:00
f3125fdfde
document code origins
...
fixes #65
2015-09-25 11:40:07 +02:00
06a133135f
Fix comparison between signed/unsigned warning for real
2015-09-25 11:05:51 +02:00
b8b07511b1
use proper unsigned type for ESSID length
2015-09-25 10:49:14 +02:00
45ccd84309
use nlmsg_data instead of the too-new genlmsg_hdr
2015-09-25 10:49:01 +02:00
e1203ca62a
use NL80211_RATE_INFO_BITRATE (16-bit)
...
NL80211_RATE_INFO_BITRATE32 is not available widely enough yet (the libc
used by travis doesn’t have it yet, for example).
2015-09-25 10:42:30 +02:00
668bf2079f
wireless (linux): switch from libiw to libnl
...
Based on http://cr.i3wm.org/patch/692/ by Alexander Monakov
fixes #32
fixes #52
2015-09-24 21:47:02 +02:00
fb57fca5c2
Merge pull request #59 from bsdjhb/freebsd_wifi
...
Fix various issues with wireless information under FreeBSD:
2015-09-16 14:06:48 +02:00
85618dc8e8
Fix various issues with wireless information under FreeBSD:
...
- Instead of hoping that the currently associated AP will show up as
the first AP in the list of scan results, fetch the BSSID of the
currently associated AP and use that to fetch station info for the
AP. This provides more frequently updated signal strength
information than scan results and reliably provides information when
multiple APs are in range.
- Do not treat the RSSI value as a raw signal value in dBm. Instead, use
the same formula as ifconfig(8) to compute a signal value.
- Do not report the beacon interval value as a signal quality level.
2015-09-15 13:39:01 -07:00
dee6d52720
Fix some issues with displaying Ethernet media status on recent FreeBSD kernels.
...
- Don't apply IFM_SUBTYPE to the raw subtype in the description table.
IFM_SUBTYPE() requires a fully populated word and was truncating values
in the table when comparing resulting in false matches (notably
"10GBase-KX4" for the no media case) after recent changes to add extended
Ethernet media states in FreeBSD.
- Explicitly check for IFM_ETHER.
- Use SIOCGIFXMEDIA when present to obtain extended media states on newer
kernels.
- Explicitly handle "no carrier".
2015-09-15 10:48:16 -07:00
9b238a8d65
Use "color_degraded" when interface has no IP
...
On laptops one may want to have all interfaces up in order to let network
prioritization manage switching between wired and wireless connection. In such
cases lack of IP address is a useful hint about currently used interface, and
color-coding makes it stand out more.
2015-08-06 17:20:29 +02:00
15f2279592
Use SndIO for volume module on OpenBSD
...
* add audio(4) code by Robert Nagy
* disable PulseAudio
While at OpenBSD support, add "-pthread" to LIBS.
2015-08-01 17:35:09 +02:00
80e7b83d54
Add ifdef to compile print_disk_info on Mac
2015-07-06 15:48:39 +02:00
d1cec2632d
Fix undeclared identifier thermal_zone error
...
when THERMAL_ZONE is not defined.
2015-07-06 15:47:44 +02:00
a2b8529043
add apostrophe to error message to fix grammar
2015-06-12 23:08:46 -04:00
75a835742e
Use format_not_mounted if the directory for a disk_info block does not exist.
...
This is useful for dynamically mounted devices like thumb drives that get mounted into a directory such as
'/media/$UID/$NAME'.
fixes #33
2015-05-29 08:43:29 +02:00
d1aa135d28
Clamp the percentage at 100% when last_full_capacity is enabled.
2015-05-20 19:17:23 +02:00
d7f0d64c40
Changed battery info output to HH:MM for consistency accross all platforms
2015-05-05 10:51:57 +01:00
f779da1a59
PulseAudio muted volume support ( fixes #27 )
2015-04-19 13:28:26 -03:00
e91891729e
Use the maximum rssi, not the scaled percentage for the signal level.
...
This makes the value for %signal match ifconfig(8) in all cases.
2015-04-04 10:56:58 +02:00
9abe0a9d59
Merge pull request #7 from Watcom/master
...
PulseAudio support for volume input
2015-04-03 14:45:40 -07:00
1710c206cf
PulseAudio support for volume input
2015-04-03 17:57:40 -03:00
d00a0e087c
Merge pull request #17 from chrko/format_down
...
Adding format_down option to path_exists and run_watch
2015-04-02 13:42:47 -07:00
5c094a5493
Adding the option "format_down" to path_exists and run_watch.
...
This fixes #1 .
2015-04-02 22:31:06 +02:00
ae50bbe257
sys/dkstat.h has been removed from OpenBSD and it's functionality actually lived/lives in sys/sched.h
2015-04-02 20:31:17 +02:00
b12e11237b
refactoring to avoid code duplication
2015-03-29 17:05:26 -03:00
c9dc67e054
print_cpu_usage: Fix warnings on non linux
...
Move linux variable under LINUX boundaries
2015-03-25 08:19:13 +01:00
0b882f36b5
print_eth_info: fix warnings on FreeBSD
2015-03-25 08:18:23 +01:00
eaf5d6bf80
print_volume: don’t return, complete the buffer first
...
Follow the changed done for Linux on f0cd726b
2015-03-25 08:13:47 +01:00
e9fc4c1c06
Fix build on FreeBSD
2015-03-25 08:03:23 +01:00
0a84bcb74a
Pass the "instance" JSON property key for tztime blocks
...
fixes #10
2015-03-23 21:42:52 +01:00
d74e904bf4
clang-format-3.5 -i **/*.[ch], update modeline
...
From here on, we’ll use clang-format to automatically format the source.
This has worked well in i3, so we are introducing it for i3status.
2015-03-16 10:01:07 +01:00
562a879f7c
removing Yoda-Style
...
adding some words in the manpage
2015-02-22 18:25:12 +01:00
85bb373095
Adding optional configuration option to "print_disk_info".
2015-02-18 23:43:25 +01:00
f7b25a15dd
Excluding the code on BSD systems.
2015-02-18 22:11:57 +01:00
014e66563f
Make the code more readable.
2015-02-18 22:11:16 +01:00
e70ea4247f
Modify print_disk_info. Now there is no output if the path is no mountpoint.
2015-02-18 16:53:24 +01:00
05273b03fd
Avoid use of uninitialized variable in print_battery_info
...
The boolean flag 'watt_as_unit' may be used without being initialized if the
configured battery path does not contain expected statistics (for example if
it is misconfigured and points to AC adapter info or simply an unrelated file).
Even though it does not cause ill effects, it causes a warning (true positive)
when running i3status under Valgrind. Initialize the variable to make code
well-defined.
2014-12-22 09:19:40 +01:00
b219f47f39
support the special interface name _first_ for ethernet/wireless
...
Since we have deterministic device names in Linux, these strings are a
much better default in the i3status config than "eth0" and "wlan0" (what
we used before).
2014-12-07 15:17:31 +01:00
7bdfb5b72e
i3status: Support %frequency for wireless interfaces
...
In many public WiFis, the 2.4 GHz wireless band is slow due to
congestion, while there is still plenty of bandwidth available on the
5 GHz area. So when debugging wireless issues it's convenient to have
i3status display the frequency of the access point that the interface is
connected to.
This patch adds support for the %frequency tag for wireless interfaces,
so for example:
format_up = "WLAN: %essid - %quality / %frequency"
would result in:
"WLAN: eduroam - 074% / 2.4 GHz"
2014-12-03 08:14:21 +01:00
8e22f3839d
Created three individual Strings for each battery status (charging, dicharching, full)
...
Replaced hard coded status strings (CHR, BAT, FULL) in
print_battery_info.c with user defined strings. The new strings are
'status_chr', 'status_bat' and 'status_full' and can be set in i3status.conf.
e.g.
status_chr = "⚡ CHR"
If any of the new status strings is omitted the standard strings (CHR,
BAT, FULL) are used.
2014-10-07 18:52:01 +02:00
8a57208b1d
Bugfix: fix wrong color tags with xmobar
...
fixes #1353
2014-08-26 20:54:04 +02:00
fcd95c2408
Fix battery indicator on systems without POWER_SUPPLY_VOLTAGE_NOW.
...
In my case, the voltage variable would stay initialized as -1,
which caused the calculation of battery charge percentage to be
incorrect (I would get the message that there is no battery present
or even -0% charge).
I have no idea how this would affect other systems, since I don't
have a chance to test this.
2014-08-25 19:36:02 +02:00
d73ca2fa82
Fix Dragonfly BSD CPU temperature gauge
...
This patch fixes CPU temperature gauge for DragonFly BSD.
Commit 0eeded8
2014-08-08 11:57:01 +02:00
2158128ea0
Use the absolute values for (dis)charging rates
...
Apparently some notebooks report a negative current, whereas most don’t.
fixes #1249
2014-05-31 14:01:18 +02:00
653505a3bb
run_watch: check all matching pid files (until first valid one) (Thanks brotbart)
...
fixes #1245
2014-05-15 21:51:01 +02:00
b26b118d76
Fix NetBSD CPU temp gauge bug
...
This patch fixes a bug in which multiple (conflicting) CPU temps may be
included in the output for the "cpu temperature" module.
The bug is due to the way that the code parsed the envsys(4)-returned data,
and would manifest itself on x86-based NetBSD machines, since those use
cputemp(4) as well as acpitz(4), thereby creating multiple envsys(4) entries
with identical descriptions but which refer to different physical sensors.
Instead of matching the description attribute of each device returned by
envsys(4) against the target format, this patch throws away non-matching keys
in the first instruction inside the dict walk. This has the benefit of sparing
unnecessary CPU cycles, and preventing other sensors from being included
erroneously.
Additionally, the THERMAL_ZONE format is now joined with OpenBSD in that it
uses acpitz(4) explicitly. This is prefered since it is much older (dating
back to NetBSD 2.0), and does not exclude x86-based users (as with cputemp(4)).
2014-04-30 09:28:09 +02:00
628149b227
Implement battery functionality for NetBSD users
...
This patch takes a similar approach as the NetBSD CPU temperature
code in that it uses proplib(3) to walk dictionaries supplied by
envsys(4).
In addition to providing the basic functionality, it:
* Provides all existing format specifiers (%emptytime %consumption
%status %percentage %remaining)
* Respects all existing config options (hide_seconds, low_threshold,
integer_battery_capacity, last_full_capacity)
* Projects "time until full" when battery status is CS_CHARGING
2014-04-30 09:23:17 +02:00
4f7da73885
Unify use of string comparisons
...
* strncmp(s1, s2, strlen(s2)) → BEGINS_WITH(s1, s2)
* strncmp(s1, s2, strlen(s1)) → strcmp(s1, s2)
* Prefer case-insensitive comparison for options
2014-03-12 08:28:16 +01:00
52814295a0
For the %percentage display of batteries, drop the leading '0' for values < 10.
2014-03-12 08:27:00 +01:00
bc0bd8c9e0
disk: Colorize output when below given threshold
...
New disk module options:
* threshold_type: ^(percentage|[kmgt]?bytes)_(free|avail)$
* low_threshold: <double>
fixes #912
2014-03-09 22:57:19 +01:00
0c2b518b8a
Typo in function name
...
Fixes the typo in print_seperator()
2014-03-01 22:35:37 +01:00
7b021d3eb2
i3status: Allow customization of module separator
...
This patch adds the ability to customize the separator that is placed
between modules.
Specifically this patch:
* adds the "separator" general directive
* moves the definition of the default separator for the different
output formats (excluding color formatting) to src/i3status.c
* updates the SEC_CLOSE_MAP macro to disable the separator for the
i3bar output format if the separator directive dictates so
* changes print_seperator() in src/output.c to take a separator
parameter in order to disable the output of the separator if
the separator is empty and to use the provided separator
otherwise
* updates the manpage to explain the new directive
2014-03-01 10:21:11 +01:00
26faed4c2f
i3status: Bugfix: Reading multiple temperature sensors not possible
...
This patch inlines the creation of the thermal zone string in order
to force computation on each invocation. This is necessary to be able
to read the values of several temperature sensors.
2014-02-26 22:32:32 +01:00
c01a8110a4
Add hide_seconds option
...
fixes : #1134
2014-02-08 20:36:59 +01:00
596f2264f4
disk: Distinguish between IEC, SI and custom prefixes
...
* IEC: Ki, Mi, Gi, Ti (powers of 1024)
* SI: k, M, G, T (powers of 1000)
* custom: K, M, G, T (powers of 1024)
2013-12-10 21:18:14 +01:00
717484184f
Add support for path_exists directive.
2013-11-22 15:52:27 +01:00
4bd0ba88c8
Added different format string for volume in case it is muted.
...
If the volume is muted, the volume level would simply be displayed as zero and the color changed to color_degraded.
This patch lets the user define a custom format string for when the volume is muted.
The default value is "♪: 0%" ("♪: %volume" being the usual format).
2013-11-18 22:31:42 +01:00
14b43bdec2
format detection: simplify code, handle "sh" processes in the hierarchy
...
i3 starts processes using /bin/sh now, not $SHELL. This increases the
likelihood with which we are started by dash, which tends to leave its
processes in the hierarchy, e.g.:
michael 1524 i3bar --bar_id=bar-0 --socket=/run/user/1000/i3/ipc-s
michael 1525 \_ /bin/sh -c i3status
michael 1526 \_ i3status
This case is now handled correctly — when the parent is “sh”, the parent
of sh will be used instead.
2013-11-09 14:37:05 +01:00
31509b0d56
fix slurp(), it needs to read size-1 for the trailing NUL
2013-11-09 14:37:04 +01:00
ebfafc5dac
print_cpu_temperature: fix memory leak (Thanks kuba)
2013-10-24 19:19:21 +02:00
c6e9fc84c6
Add support for cpu temperature on NetBSD (using envsys(4))
2013-10-07 19:32:50 +02:00
32551729e8
Allow to print cpu usage on NetBSD
2013-10-07 19:31:01 +02:00
cf2fb61911
Allow to print eth information on NetBSD
2013-10-07 19:30:51 +02:00
41be50a983
allow load to be a float
2013-07-09 23:22:26 +02:00
7a372b0f46
Implement term-output-format
2013-05-19 19:51:01 +02:00
8445d6a929
print_volume(linux): Open a new mixer every time.
...
This fix the following bug:
If you switch your sound card on-the-fly, print_volume continued to
use the old sound card.
2013-05-19 19:48:07 +02:00
6a84138251
fix #1017 : i3status uses generic battery instance
2013-05-04 17:53:20 +02:00
13ebebeb7a
Support colored output for CPU temperature on FreeBSD
2013-03-20 11:16:53 +01:00
f0cd726bf0
print_volume: don’t return, complete the buffer first
...
Otherwise, i3bar will display “SPEC VIOLATION” because full_text is
missing in the block.
2013-03-19 19:56:44 +01:00
8dbadb6d4e
Enable colored output for battery on FreeBSD
2013-03-19 19:54:15 +01:00
f30ec89b79
Support mixer_idx with OSS
...
make mixer_idx load the default mixer
2013-03-19 19:53:26 +01:00
7f83d0a197
Show degraded colors in case volume is muted with OSS
2013-03-19 18:36:49 +01:00
5e0b8812bf
Added format_down option for battery if no battery is available.
2013-03-09 11:43:55 +01:00
d62e10c56d
Fix FTBFS on Hurd
...
On GNU/Hurd, THERMAL_ZONE is undefined. This makes compilation fail as
outwalk is declared inside of #ifdef THERMAL_ZONE, but it's used outside
of it (by OUTPUT_FULL_TEXT).
This moves the declaration outside the #ifdef to allow for successful
compilation on Hurd again.
2013-03-02 13:48:43 +01:00
b6c4d4ee46
wireless: call START_COLOR only once (Thanks XTaran)
2013-02-26 00:32:24 +01:00
4a282a4978
battery: initialize colorful_output to false
2013-02-23 18:05:08 +01:00
d52b9f82ca
ipv6: properly handle colors for output_format == xmobar
2013-02-23 18:04:52 +01:00
6279964c6b
Add colorized output for load avg
2013-02-22 14:09:58 +01:00
67c2c1a7ea
Added option to show battery capacity without decimals
2013-02-14 19:35:15 +01:00
8c273e54b8
use stdbool instead of (int)1 and (int)0 directly
2013-02-10 17:21:46 +01:00
78cd0e1e01
s/\<timezone\>/tz/ in order to not shadow the timezone var from time.h
2013-02-10 17:19:56 +01:00
2ebe1f3726
Add tztime module to support multiple different timezones.
2013-02-10 17:18:32 +01:00
68e447d3f6
Bugfix: output auto detect: properly detect ambiguous situations (Thanks mist)
...
fixes #940
2013-02-04 21:36:55 +01:00
a5a43af186
retab! print_cpu_temperature
2013-01-28 11:37:23 +01:00
a87b63c3e9
Make sure colorful_output variable is initialized.
2013-01-28 11:36:23 +01:00
d43664235a
wifi: properly display ad-hoc networks
...
No statistics are displayed with ad-hoc networks since none are available.
2013-01-24 15:22:00 +01:00
6147e2b268
changing volume color from bad to degraded if muted
2013-01-05 08:37:20 +01:00
0eeded8bc0
DragonFlyBSD support added
2012-11-15 12:31:17 +01:00
638156c8b2
Teen ordinal numbers always use a 'th' suffix.
2012-11-06 00:26:47 +01:00
e10d38fea0
Reduce the season day to 0-9 to properly print ordinal suffixes
2012-10-19 19:36:53 +02:00
35f3bcb348
bugfix: colorize output even without discharge rate (thanks f8l)
...
On some systems, the discharge rate may be missing, although the battery
is still working. This leads to an edge case on Linux systems in which
the output may not be colorized although a threshold was defined.
This commit fixes the behavior by colorizing output if threshold_type is
set to "percentage". Since we cannot calculate remaining time without
discharge rate, output is still uncolorized in case of threshold_type
set to "time".
2012-10-16 22:49:22 +02:00
450424f97a
implement max_threshold for linux, too
2012-10-16 10:52:57 +02:00
ae4873bac7
i3status - More temperature related fixes for OpenBSD, and a general feature
...
- Temperature sensors can now set a 'max_threshold' value to color the output red if exceeded.
- Allow for arbitrary temperature sensors nodes to be selected with 'path' on OpenBSD.
2012-10-16 10:51:15 +02:00
1c2517a399
i3status - Default to acpitz(4) instead of cpu(4) for OpenBSD temperature readings
...
The acpitz(4) values are eventually used by the kernel to determine if the machine
is getting too hot.
2012-10-16 10:48:44 +02:00
ed03d2450c
i3status - Handle down wireless interfaces just like ethernet interfaces (e.g. colors)
2012-10-16 10:48:29 +02:00
04dc34f27d
Skip a day in the Discordian calendar when St. Tib's Day has passed
2012-10-16 09:25:38 +02:00
794151cfe7
Implement %essid and %signal for wireless on OpenBSD.
2012-10-10 08:24:29 +02:00
11c4ab9870
Implement %speed for Ethernet on OpenBSD.
2012-10-10 08:24:04 +02:00
8da0452d2c
Various fixes for the OpenBSD section of the battery backend.
...
- fix the battery status printing in %status.
- fix remaining time when we're charging.
- use colors to indicate battery status.
- small cleanups.
2012-10-10 08:23:14 +02:00
7dcc961fa2
Bugfix: Move the pbval definition outside the ifdef (Thanks XTaran)
...
This fixes compilation on !linux
2012-10-03 15:12:49 +02:00
5c615f7074
Save the DNS lookup for K.root-servers.net (Thanks barfoos)
...
This avoids running into a timeout when there is no connectivity on
i3status startup.
2012-09-29 00:08:56 +02:00
59d52ad787
print_battery.c: do END_COLOR only if START_COLOR was used
2012-09-05 23:28:31 +02:00
1c4677a644
turn volume into red if muted
...
fixes #743
2012-09-05 23:28:27 +02:00
d6b8a4efc1
introduce percentages for all values, document them
2012-08-31 14:16:58 +02:00
50ad0334f6
adding percentage format string for disk info module
...
explicit cast to double, changed format string to percentage
2012-08-31 14:07:46 +02:00
fa4e9cdfb3
Eat unnecessary space from the battery format str.
...
If the battery is not discharging it may be not possible to give information on
remaining time or consumption. The resulting strings (%remaining, %consumption,
%emptytime) are empty then. But because they are in the format string, the
output string contains unnecessary spaces in this case.
This commit makes i3status strip these spaces.
2012-08-31 12:08:24 +02:00
68f438ec9e
add additional battery threshold type "percentage"
...
The battery threshold can now be configured as type "time" or
"percentage", but defaults to "time" to prevent unexpected behavior.
Also, low_threshold was set to a more reasonable default of 30.
2012-08-28 18:05:11 +02:00
3baf27bf1d
use correct units for battery calculation
2012-08-13 01:44:40 +02:00
dea8703aba
Bugfix: Properly skip "consumption", not "consumptionbuf" (Thanks mloskot)
...
Fixes #752
2012-07-12 08:16:40 +02:00
141f45e792
small style fix in src/print_battery_info.c (move comment)
2012-07-11 19:11:29 +02:00
1271ff2aa4
Calculate the consumption if POWER_SUPPLY_POWER_NOW does not exist in uevent
2012-07-11 19:11:08 +02:00
f5c96008b0
colorful ipv6 status message
2012-07-10 20:37:54 +02:00
c01e87b269
Added consumption to battery info
2012-07-09 15:13:05 +02:00
ccc31f0b80
Added condition, for red color, when battery-time is low, namely battery is discharging
2012-07-09 15:12:43 +02:00
859a7690a6
Avoid division by zero when calculating CPU usage.
2012-06-28 12:05:01 +02:00
10ed9efff4
Moved translation of wireless status code to text from multiple places into single BATT_STATUS_NAME macro. It simplifies customisation of the hard-wired status text.
2012-06-11 12:00:24 +02:00
7c02c10b72
colorize battery output if remaining time below threshold
2012-05-25 09:53:49 +02:00
7a77472a81
battery info: output errors in JSON in every case
...
This hopefully fixes http://bugs.i3wm.org/707
2012-05-15 12:30:23 +02:00
296eb5e706
Error handling: Never output null as full_text (JSON), prefix messages with i3status (Thanks Artemis)
...
The former made i3bar crash, the latter is helpful for debugging.
2012-05-09 18:56:57 +02:00
4ef47541b9
Improve error message when the cpu temperature cannot be read
2012-05-09 18:39:41 +02:00
4ddd115af8
Use (void) instead of () for functions without args (Thanks fernandotcl)
...
See also:
http://article.gmane.org/gmane.linux.kernel/1268792
The C compiler will handle (void) as "no arguments" and () as "variadic
function" (equivalent to (...)) which might lead to subtle errors.
2012-05-07 08:28:04 +02:00
6b447f7f1b
- Remove some superfluous #ifdef clutter - If we're compiling on !(Linux or FreeBSD), just emit a '?'.
2012-05-04 16:10:19 +02:00
b5f89c83cc
Handle %d with non-default CPU temperature path.
2012-05-04 12:29:02 +02:00
7dc10f4205
Fix harmless format string mistake (Thanks loblik)
2012-05-02 17:42:51 +02:00
2847f83402
Implement displaying battery status on OpenBSD.
2012-04-30 13:00:49 +02:00
1c3fb04fb9
Implement basic fetching of cpu temperature on OpenBSD.
2012-04-30 13:00:46 +02:00
aabac78fd0
Print the volume on OpenBSD too. Add missing library to Makefile accordingly.
2012-04-29 11:13:29 +02:00
688d300646
Fix disk usage on OpenBSD.
2012-04-29 11:13:14 +02:00
75a741484e
Fix CPU usage on OpenBSD. Currently only takes the first cpu into account, but works fine otherwise.
2012-04-29 11:13:06 +02:00
6eac8bee58
Fix include order; fixes build on OpenBSD.
2012-04-28 10:08:37 +02:00
1b3aa40485
add yajl compat code
2012-04-08 14:05:47 +02:00
12b1bfa9b8
Properly output JSON with libyajl
2012-03-25 22:05:00 +02:00
d5b4c8e368
Implement the i3bar JSON protocol
...
This hardcodes all the JSON parts. Strings are not properly escaped currently.
The best/easiest way to fix this is by actually using libyajl.
2012-02-16 23:30:54 +00:00
be61907ad5
FreeBSD: fix disk usage print
2011-12-09 23:39:01 +00:00
3471ff39f8
battery: implement "path" option for batteries with non-standard paths
2011-11-26 18:26:38 +00:00
42e61c4f6e
fix parentheses in cc1457c4f0
2011-08-29 16:06:40 +02:00
7870fdae86
initialize variables to fix compiler warning
2011-08-26 00:33:56 +02:00
cc1457c4f0
make modules more resilient to failure
2011-08-25 23:27:10 +02:00
319664ce43
only compile print_cpu_temperature if THERMAL_ZONE is available
...
Fixes FTBFS on hurd-i386
2011-07-24 23:17:34 +02:00
d87a735be5
Add simple volume support on FreeBSD
2011-07-24 02:12:23 +02:00
f288fd2e4f
Add support for cpu usage on FreeBSD
2011-07-24 02:12:22 +02:00
342f942f15
Support wifi on FreeBSD
2011-07-24 02:12:20 +02:00
5e276db583
Fix FTBFS on kFreeBSD
2011-07-21 22:02:34 +02:00
2e621680c4
slurp(): null-terminate buffer (Thanks mist)
2011-07-13 19:17:24 +02:00
7728c35401
correctly auto-detect the output format with zsh (Thanks mist)
2011-07-13 17:21:35 +02:00
e924ce2d19
fix memory leak
2011-07-13 16:09:30 +02:00
7ab9167536
magic: try to auto-detect output_format by default (dzen2/i3bar/xmobar)
2011-07-13 03:27:57 +02:00
0b299f740d
Fix trailing whitespaces, document cpu_usage in manpage
2011-05-06 13:17:26 +02:00
8b18e8e33c
Add print_cpu_usage
2011-05-06 13:13:11 +02:00
0a13d30465
Also use the correct time for the ddate module
2011-04-22 01:10:40 +02:00
4fa8a4e0ab
get time at the beginning of the loop
2011-04-21 20:50:14 +02:00
4ec02bea7b
implement the 'path' option for cpu temperature
2011-01-06 18:22:46 +01:00
39feebea4d
Cache the result of the DNS query also if there is no IPv6 connectivity (Thanks dothebart)
2011-01-03 15:00:42 +01:00
cf09102433
Use kill(pid, 0) to check if the process is alive
2010-11-28 16:45:34 +01:00
75670ba64a
battery: use POWER_NOW if CURRENT_NOW is not available
...
CURRENT_NOW was deprecated for some battery types in recent linux kernels
(2.6.36)
2010-11-03 14:08:22 +01:00
af5fd7b77e
Implement displaying the wireless connection speed (Thanks Felicitus)
...
Based on a patch by Felicitus.
2010-09-22 19:59:48 +02:00
fac05bf4e8
Bugfix: Correctly check for interface up/down-status (Thanks docsteel)
2010-07-21 11:01:37 +02:00
eb46963d4c
Implement ALSA volume support
2010-07-20 19:33:41 +02:00
d8b6f03144
print_ddate(): Correctly seperate the St. Tibs String from the rest
2010-07-15 15:12:48 +02:00
38337511e9
Support customized colors.
2010-07-04 21:52:43 +02:00
570bc669b4
Don't leak skfd on errors. Don't spam stderr if the iface isn't present.
2010-06-30 10:49:40 +02:00
1e0ad8d251
Evaluate wireless quality average. Fix dBm calculations.
2010-06-25 11:02:27 +02:00
28ba2ae892
disk_info: implement %avail
2010-06-25 01:24:26 +02:00
71f7166032
wireless: fix formats
2010-06-25 00:04:11 +02:00
506b17de6e
Display wireless quality as percentage
2010-06-24 23:59:44 +02:00
29e9a99f06
Take into account the wireless quality maximum.
2010-06-24 23:57:36 +02:00
93ea987f84
ddate: Use static memory / only allocate format copy memory once
2010-06-19 12:50:03 +02:00
6298377bd4
Implemented a ddate-module
2010-06-19 12:44:43 +02:00
da595ee9f7
Do proper error handling in print_time()
2010-06-19 12:44:19 +02:00
01210258d0
Treat the interface as 'down' when it cannot be found in /proc/net/wireless (Thanks to Fabio Zanini)
2010-04-19 13:29:52 +02:00
c645340b1d
Little style fixes for the last commit
2010-04-06 14:55:22 +02:00
8edce05764
ipv6: provide format strings for ipv6 up and ipv6 down
2010-04-06 14:54:25 +02:00
3eec92d504
Colorize ethernet output (patch by Peter Johnson)
2010-02-14 12:49:03 +01:00
9c14b7a527
wireless: display no IP instead of (null)
2010-01-26 14:25:37 +01:00
c166d2e2d3
get_ip_address: return NULL instead of down
2010-01-26 14:25:21 +01:00
a820cf4ce0
Fix FTBFS on kFreeBSD and Hurd: libiw is Linux-only
2010-01-11 23:07:30 +01:00
6823fbf055
disk: also round when printing TB (Thanks Merovius)
2010-01-10 11:07:21 +01:00
ced822f461
ipv6: cache the result of the DNS query only, the socket needs to be re-created every time
2010-01-04 11:16:59 +01:00
37882cee88
ipv6: reuse the existing socket for further lookups
...
This reduces network overhead if you do not run a local caching
nameserver.
2010-01-01 22:01:57 +01:00
998109a653
Remove trailing whitespace
2009-12-20 18:48:01 +01:00
a5594ee17f
Implemented showing the time when battery is empty
2009-12-20 18:48:01 +01:00
9307ff9d13
The load values represent 1,5,15 min, not 5,10,15 min (Thanks Chris)
2009-12-13 13:59:59 +01:00
013fdece8d
Change output format to be a config option instead of a compile time define
2009-10-24 13:27:02 +02:00
e4bd4bd2a3
battery: split up %remaining into %percentage and %remaining (Thanks shatter)
2009-10-16 22:21:05 +02:00
5fc2a8a38e
Actually use the format string for the battery (Thanks shatter)
2009-10-16 22:07:42 +02:00
da8cb9ebfc
Implement option to use the last full capacity instead of the design capacity
2009-10-16 20:37:41 +02:00
8a66289702
Obey format for run_watches
2009-10-16 20:31:20 +02:00
b88a55ffa6
Implement format_up/format_down for ethernet
2009-10-16 20:14:40 +02:00
cb9bab4255
Bugfix: Cast the integers to uint64_t *before* multiplying (Thanks msi)
...
This fixes problems on 32-bit computers.
2009-10-16 00:25:05 +02:00
c4c17294ad
Cleanup disk "module"
2009-10-12 00:53:47 +02:00
783707906c
Implement disk info (%free/%used/%total)
2009-10-11 23:27:26 +02:00
f947d0a446
Breaks configfiles! Major refactoring of i3status, see below
...
We finally switched to libconfuse for a configuration file format
which does not require much work for the programmer nor for the user.
Plus, it avoids the Not-Invented-Here syndrome of yet another config
file format.
Furthermore, as a consequence of providing format strings for every
"module" (ipv6, wireless, …), we directly print the output and thus
we needed to drop support for wmii. This allowed us to get rid of
quite some complexity.
Documentation about the new configuration file and options will
follow. This commit is the beginning of what will be i3status v2.0.
2009-10-11 22:14:29 +02:00
c4a3d64b38
Bugfix: close the filehandle when done
2009-10-01 18:18:46 +02:00
b2292e770e
Implement getting the wireless ESSID
...
This adds a dependency for libiw
2009-10-01 17:43:32 +02:00
cdb450376e
Bugfix: Don’t show colors in wireless info if colors are disabled (Thanks shatter)
2009-09-26 13:26:13 +02:00
89ad3dbaa2
Don’t display an error message if getaddrinfo() fails for getting the IPv6 addr (Thanks Atsutane)
2009-09-26 13:24:36 +02:00
48e033598b
Small improvement regarding readability if one hasn't an IPv6 address.
2009-09-11 23:05:54 +02:00
112512c546
Initialize order array with -1 to avoid printing duplicate lines (Thanks XTaran)
2009-09-01 23:43:31 +02:00
e565e313f7
Support for (Debian) GNU/kFreeBSD
2009-09-01 12:39:49 +02:00
bb52b40c8e
Add support for xmobar
...
Use i3status-xmobar | xmobar -o -t "%StdinReader%" -c "[Run StdinReader]"
You might need to copy the default configuration to ~/.xmobarrc
2009-08-18 21:29:44 +02:00
f8be2d1b81
Return "no battery" instead of dying if a battery wasn’t found (Thanks Mirko)
2009-07-25 21:32:38 +02:00
94911d4cc3
Don’t perror("connect") when there most likely is no IPv6 connectivity
2009-07-25 21:23:39 +02:00
dd88448709
Bugfix: Use interface instead of eth_interface in get_ip_addr()
2009-07-23 20:47:52 +02:00
a86361510c
Implement battery status and thermal zones for FreeBSD (patch by Baptiste Daroussin)
2009-07-23 18:40:49 +02:00
3de2907427
Remove unneeded struct
2009-07-22 19:01:57 +02:00
072cee2808
little fixes for FreeBSD
2009-07-22 18:51:55 +02:00
329a8994f7
Use the highest order actually used, not MAX_ORDER, for checking whether to flush (Thanks Mirko)
2009-07-22 18:39:41 +02:00
c9ab465cbb
Implement getting the interface speed on FreeBSD, patch by Baptiste Daroussin
2009-07-22 18:36:01 +02:00
e56213db28
Free the addresses correctly
2009-07-22 18:30:16 +02:00
4a6deddf7b
Obtain IP address in a portable way, patch by Baptiste Daroussin
2009-07-22 18:27:55 +02:00
bb50e22fd3
Use getloadavg() instead of using /proc, patch by Baptiste Daroussin
2009-07-22 00:09:32 +02:00
a1eda7b209
get_ipv6_addr: more documentation, use SOCK_DGRAM, reformat
2009-07-21 20:35:19 +02:00
230f3167b7
Add modelines and retab! all files
2009-07-21 20:26:53 +02:00
34ba9fa908
Correctly handle the order of items
2009-07-21 20:23:08 +02:00
6fda988f36
Use own files for each function, add get_ipv6_addr.c
2009-07-21 19:07:30 +02:00
eoin
eplanet
Clayton Craft
Watcom Hecht
Michael Stapelberg
David
Kenneth Lyons
Stefan Bader
Jakub Klinkovský
Michael Stapelberg
John Baldwin
Brendan Van Hook
Dmitrij D. Czarkoff
Alexis Hildebrandt
Viktor Stanchev
Ingo Bürk
Nicholas Helke
Jasper Lievisse Adriaanse
Christian Kohlstedde
Baptiste Daroussin
Alexander Monakov
Tuomas Tynkkynen
Cyril Andreatta
Klemen Košir
Robin Hahling
Alexander Vasarab
Mats
Marco Hunsicker
Iakov Davydov
Kinware AB
Gereon Kremer
Arnaud Degroote
M. Kory Woods
Axel Wagner
oblique
Jonas Cleve
Christoph Göttschkes
Jakob Haufe
Raphael Michel
Julien Lequertier
Emil Mikulic
Adrien Schildknecht
Scott Tincman
Deiz
Simon Elsbrock
Jasper Lievisse Adriaanse
Piotr Domagalski
Philipp Schaefer
Marcel Hellwig
Lars Kumbier
Mateusz Poszwa
Mateusz Loskot
Ewgenij Starostin
Connor Lane Smith
Axel Beckert
Peter Bui
Fernando Tarlá Cardoso Lemos
Mirko Augsburger
Christian Dietrich
André-Patrick Bubel
Atsutane