Update pre-commit hooks

Add MANIFEST.in

Closes #21

See merge request Lucidiot/pylspci!19

.drone.yml

@@ -0,0 +1,120 @@
+---
+kind: pipeline
+type: docker
+name: default
+
+steps:
+  - name: pre-commit
+    image: python:3-alpine
+    commands:
+      - apk add --no-cache git gcc musl-dev
+      - pip install .[dev]
+      - pre-commit run -a
+
+  - name: test-py36
+    image: python:3.6-alpine
+    commands:
+      - pip install .[dev]
+      - coverage run setup.py test
+      - coverage report
+
+  - name: test-py37
+    image: python:3.7-alpine
+    commands:
+      - pip install .[dev]
+      - coverage run setup.py test
+      - coverage report
+
+  - name: test-py38
+    image: python:3.8-alpine
+    commands:
+      - pip install .[dev]
+      - coverage run setup.py test
+      - coverage report
+
+  - name: test-py39
+    image: python:3.9-alpine
+    commands:
+      - pip install .[dev]
+      - coverage run setup.py test
+      - coverage report
+
+  - name: test-py310
+    image: python:3.10-alpine
+    commands:
+      - pip install .[dev]
+      - coverage run setup.py test
+      - coverage report
+
+  - name: test-py311
+    image: python:3.11-alpine
+    commands:
+      - pip install .[dev]
+      - coverage run setup.py test
+      - coverage report
+
+  - name: testpypi
+    image: python:3.11-alpine
+    commands:
+      - pip install .[dev] twine setuptools wheel
+      - |
+        echo "[distutils]
+        index-servers = testpypi
+        [testpypi]
+        repository=https://test.pypi.org/legacy/
+        username=$$TESTPYPI_DEPLOY_USERNAME
+        password=$$TESTPYPI_DEPLOY_PASSWORD" > ~/.pypirc
+      - python setup.py sdist bdist_wheel
+      - twine upload dist/* -r testpypi
+
+    when:
+      event:
+        - promote
+      repo:
+        - lucidiot/pylspci
+
+    depends_on:
+      - pre-commit
+      - test-py36
+      - test-py37
+      - test-py38
+      - test-py39
+      - test-py310
+      - test-py311
+
+    environment:
+      TESTPYPI_DEPLOY_USERNAME:
+        from_secret: testpypi_username
+      TESTPYPI_DEPLOY_PASSWORD:
+        from_secret: testpypi_password
+
+  - name: pypi
+    image: python:3.11-alpine
+    commands:
+      - pip install .[dev] twine setuptools wheel
+      - |
+        echo "[distutils]
+        index-servers = pypi
+        [pypi]
+        repository=https://upload.pypi.org/legacy/
+        username=$$PYPI_DEPLOY_USERNAME
+        password=$$PYPI_DEPLOY_PASSWORD" > ~/.pypirc
+      - python setup.py sdist bdist_wheel
+      - twine upload dist/* -r pypi
+
+    when:
+      event:
+        - promote
+      repo:
+        - lucidiot/pylspci
+      branch:
+        - master
+
+    depends_on:
+      - testpypi
+
+    environment:
+      PYPI_DEPLOY_USERNAME:
+        from_secret: pypi_username
+      PYPI_DEPLOY_PASSWORD:
+        from_secret: pypi_password

.gitlab-ci.yml

@@ -1,90 +0,0 @@
-image: python:3.9
-stages:
-  - test
-  - deploy
-
-variables:
-  PIP_CACHE_DIR: "$CI_PROJECT_DIR/.cache/pip"
-
-cache:
-  paths:
-    - .cache/pip
-    - venv/
-
-before_script:
-  - pip install virtualenv
-  - virtualenv venv
-  - source venv/bin/activate
-  - pip install .[dev]
-
-tests:
-  stage: test
-  coverage: '/TOTAL[\s\d]+\s(\d+%)/'
-  script:
-    - coverage run setup.py test
-    - coverage report
-    - codecov
-
-pre-commit:
-  stage: test
-  script:
-    - pre-commit run -a
-
-deploy-pypi:
-  stage: deploy
-  when: manual
-  only:
-    - master@Lucidiot/pylspci
-  environment:
-    name: pypi
-    url: https://pypi.org/project/pylspci
-
-  script:
-    - pip install twine setuptools wheel
-    - echo "[distutils]" > ~/.pypirc
-    - echo "index-servers =" >> ~/.pypirc
-    - echo "  pypi" >> ~/.pypirc
-    - echo "[pypi]" >> ~/.pypirc
-    - echo "repository=https://upload.pypi.org/legacy/" >> ~/.pypirc
-    - echo "username=$PYPI_DEPLOY_USERNAME" >> ~/.pypirc
-    - echo "password=$PYPI_DEPLOY_PASSWORD" >> ~/.pypirc
-    - python setup.py sdist bdist_wheel
-    - twine upload dist/* -r pypi
-
-deploy-testpypi:
-  stage: deploy
-  when: manual
-  only:
-    - branches@Lucidiot/pylspci
-  environment:
-    name: testpypi
-    url: https://test.pypi.org/project/pylspci
-
-  script:
-    - pip install twine setuptools wheel
-    - echo "[distutils]" > ~/.pypirc
-    - echo "index-servers =" >> ~/.pypirc
-    - echo "  testpypi" >> ~/.pypirc
-    - echo "[testpypi]" >> ~/.pypirc
-    - echo "repository=https://test.pypi.org/legacy/" >> ~/.pypirc
-    - echo "username=$PYPI_DEPLOY_USERNAME" >> ~/.pypirc
-    - echo "password=$PYPI_DEPLOY_PASSWORD" >> ~/.pypirc
-    - python setup.py sdist bdist_wheel
-    - twine upload dist/* -r testpypi
-
-pages:
-  stage: deploy
-  when: manual
-  needs:
-    - pre-commit
-  only:
-    - master@Lucidiot/pylspci
-
-  artifacts:
-    paths:
-      - public
-
-  script:
-    - cd docs
-    - make html
-    - mv _build/html ../public

.pre-commit-config.yaml

@@ -2,7 +2,7 @@
 # See https://pre-commit.com/hooks.html for more hooks
 repos:
 -   repo: https://github.com/pre-commit/pre-commit-hooks
-    rev: v4.0.1
+    rev: v4.4.0
     hooks:
     -   id: trailing-whitespace
     -   id: end-of-file-fixer
@@ -11,12 +11,12 @@ repos:
     -   id: check-merge-conflict
     -   id: check-executables-have-shebangs
     -   id: check-symlinks
--   repo: https://gitlab.com/PyCQA/flake8
-    rev: 3.9.2
+-   repo: https://github.com/PyCQA/flake8
+    rev: 6.0.0
     hooks:
     -   id: flake8
 -   repo: https://github.com/pre-commit/mirrors-mypy
-    rev: v0.910
+    rev: v1.2.0
     hooks:
     -   id: mypy
         args:
@@ -26,10 +26,10 @@ repos:
         -   --check-untyped-defs
         -   --no-implicit-optional
 -   repo: https://github.com/PyCQA/doc8
-    rev: 0.9.0
+    rev: v1.1.1
     hooks:
     -   id: doc8
 -   repo: https://github.com/PyCQA/isort
-    rev: 5.9.3
+    rev: 5.12.0
     hooks:
     -   id: isort

MANIFEST.in

@@ -0,0 +1,6 @@
+include requirements.txt
+include requirements-dev.txt
+include VERSION
+include LICENSE
+include README.rst
+include pylspci/py.typed

README.rst

@@ -5,4 +5,4 @@ A Python parser for the ``lspci`` command from the pciutils_ package.
 `Browse documentation`_
 
 .. _pciutils: http://mj.ucw.cz/sw/pciutils/
-.. _Browse documentation: https://lucidiot.gitlab.io/pylspci/
+.. _Browse documentation: https://lucidiot.tildepages.org/pylspci/

VERSION

@@ -1 +1 @@
-0.4.0
+0.4.3

docs/conf.py

@@ -21,7 +21,7 @@ sys.path.insert(0, os.path.abspath('..'))
 # -- Project information -----------------------------------------------------
 
 project = 'pylspci'
-copyright = '2019, Lucidiot and contributors'
+copyright = '2022, Lucidiot and contributors'
 author = 'Lucidiot and contributors'
 
 # The short X.Y version
@@ -62,7 +62,7 @@ master_doc = 'index'
 #
 # This is also used if you do content translation via gettext catalogs.
 # Usually you set "language" from the command line for these cases.
-language = None
+language = 'en'
 
 # List of patterns, relative to source directory, that match files and
 # directories to ignore when looking for source files.

docs/contributing.rst

@@ -6,8 +6,8 @@ Contributions to the project are greatly appreciated.
 Bugs and suggestions
 --------------------
 
-You may `submit an issue`_ to GitLab to warn of any bugs, ask for new features,
-or ask any questions that are not answered in this documentation.
+You may `submit an issue`_ to the Gitea repository to warn of any bugs, ask for
+new features, or ask any questions that are not answered in this documentation.
 
 When reporting a bug, do not forget to put in your version of Python and your
 version of *pylspci*. This will greatly help when troubleshooting, as most
@@ -22,7 +22,7 @@ Setup
 You will need a virtual envionment to work properly. `virtualenvwrapper`_ is
 recommended::
 
-   git clone https://gitlab.com/Lucidiot/pylspci
+   git clone https://tildegit.org/lucidiot/pylspci.git
    cd pylspci
    mkvirtualenv -a . pylspci
    pip install -e .[dev]
@@ -44,8 +44,8 @@ Tests coverage
 
 I aim for 100% coverage on all of my Python packages whenever I add unit
 tests to them; this package is no exception. CI checks use the `coverage`_
-Python package and `codecov`_ to check for test coverage. To get test coverage
-data locally, run::
+Python package to get coverage statistics.
+To get test coverage data locally, run::
 
    coverage run setup.py test
 
@@ -60,7 +60,7 @@ offline using your favorite web browser and shows line by line coverage::
 
 If you are having issues reaching 100% coverage, try to still add some tests,
 and mention your issues when creating a pull request to the
-`GitLab repository`_.
+`Gitea repository`_.
 
 Linting
 ^^^^^^^
@@ -82,13 +82,12 @@ Documentation
 The documentation you are reading is generated by the `Sphinx`_ tool.
 The text files that hold the documentation's contents are written in
 `reStructuredText`_ and are available under the ``/docs`` folder of the
-`GitLab repository`_.
+`Gitea repository`_.
 They are also subject to linting using the ``doc8`` tool.
 
-.. _submit an issue: https://gitlab.com/Lucidiot/pylspci/issues/new
+.. _submit an issue: https://tildegit.org/lucidiot/pylspci/issues/new
 .. _virtualenvwrapper: https://virtualenvwrapper.readthedocs.io
 .. _coverage: https://coverage.readthedocs.io/
-.. _codecov: https://codecov.io/gl/Lucidiot/pylspci
-.. _GitLab repository: https://gitlab.com/Lucidiot/pylspci
+.. _Gitea repository: https://tildegit.org/lucidiot/pylspci
 .. _Sphinx: http://www.sphinx-doc.org/
 .. _reStructuredText: http://www.sphinx-doc.org/en/master/usage/restructuredtext/basics.html

docs/index.rst

@@ -18,14 +18,11 @@ Python lspci parser
 .. image:: https://img.shields.io/pypi/status/pylspci.svg
    :target: https://pypi.org/project/pylspci
 
-.. image:: https://gitlab.com/Lucidiot/pylspci/badges/master/pipeline.svg
-   :target: https://gitlab.com/Lucidiot/pylspci/pipelines
+.. image:: https://drone.tildegit.org/api/badges/lucidiot/pylspci/status.svg
+   :target: https://drone.tildegit.org/api/badges/lucidiot/pylspci/status.svg
 
-.. image:: https://codecov.io/gl/Lucidiot/pylspci/branch/master/graph/badge.svg
-   :target: https://codecov.io/gl/Lucidiot/pylspci
-
-.. image:: https://img.shields.io/badge/badge%20count-8-brightgreen.svg
-   :target: https://gitlab.com/Lucidiot/pylspci
+.. image:: https://img.shields.io/badge/badge%20count-7-brightgreen.svg
+   :target: https://tildegit.org/lucidiot/pylspci
 
 A Python parser for the ``lspci`` command from the pciutils_ package.
 

pylspci/parsers/verbose.py

@@ -8,7 +8,7 @@ from pylspci.parsers.base import Parser
 UNKNOWN_FIELD_WARNING = (
     'Unsupported device field {!r} with value {!r}\n'
     'Please report this, along with the output of `lspci -mmnnvvvk`, at '
-    'https://gitlab.com/Lucidiot/pylspci/issues'
+    'https://tildegit.org/lucidiot/pylspci/issues/new'
 )
 
 

pylspci/tests/parsers/test_verbose.py

@@ -87,7 +87,7 @@ class TestVerboseParser(TestCase):
             msg="Unsupported device field 'NewField' with value 'Value'\n"
                 "Please report this, along with the output of"
                 "`lspci -mmnnvvvk`, at "
-                "https://gitlab.com/Lucidiot/pylspci/issues"):
+                "https://tildegit.org/lucidiot/pylspci/issues/new"):
             devices: List[Device] = \
                 self.parser.parse(SAMPLE_DEVICE + 'NewField\tValue')
 

requirements-dev.txt

@@ -1,5 +1,4 @@
 doc8>=0.8.0
 Sphinx>=1.8.1
 coverage>=4.5
-codecov>=2.0
 pre-commit>=2.9.2

setup.py

@@ -22,10 +22,16 @@ setup(
         'console_scripts': ['pylspci=pylspci.__main__:main'],
     },
     package_data={
-        '': ['VERSION', 'LICENSE', 'README.rst'],
+        '': [
+            'VERSION',
+            'LICENSE',
+            'README.rst',
+            'requirements.txt',
+            'requirements-dev.txt',
+        ],
         'pylspci': ['py.typed'],
     },
-    python_requires='>=3.5',
+    python_requires='>=3.6',
     install_requires=requirements,
     extras_require={
         'dev': dev_requirements,
@@ -36,7 +42,7 @@ setup(
     long_description=open('README.rst').read(),
     long_description_content_type='text/x-rst',
     keywords="lspci parser",
-    url="https://gitlab.com/Lucidiot/pylspci",
+    url="https://tildegit.org/lucidiot/pylspci",
     classifiers=[
         "Development Status :: 4 - Beta",
         "License :: OSI Approved :: GNU General Public License v3 (GPLv3)",
@@ -48,13 +54,17 @@ setup(
         "Programming Language :: Python :: 3.7",
         "Programming Language :: Python :: 3.8",
         "Programming Language :: Python :: 3.9",
+        "Programming Language :: Python :: 3.10",
+        "Programming Language :: Python :: 3.11",
         "Topic :: Software Development :: Libraries",
         "Topic :: System :: Hardware",
         "Topic :: Utilities",
         "Typing :: Typed",
     ],
     project_urls={
-        "Source Code": "https://gitlab.com/Lucidiot/pylspci",
-        "GitHub Mirror": "https://github.com/Lucidiot/pylspci",
+        "Homepage": "https://tildegit.org/lucidiot/pylspci",
+        "Changelog": "https://tildegit.org/lucidiot/pylspci/releases",
+        "Documentation": "https://lucidiot.tildepages.org/pylspci/",
+        "Issue tracker": "https://tildegit.org/lucidiot/pylspci/issues",
     }
 )