rockbox/apps/gui/usb_screen.c

320 lines
8.4 KiB
C
Raw Normal View History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2002 Björn Stenberg
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include <stdio.h>
#include <stdbool.h>
#include "action.h"
#include "font.h"
#ifdef HAVE_REMOTE_LCD
#include "lcd-remote.h"
#endif
#include "lang.h"
#include "usb.h"
#if defined(HAVE_USBSTACK)
#include "usb_core.h"
#ifdef USB_ENABLE_HID
#include "usb_keymaps.h"
#endif
#endif
#include "settings.h"
#include "led.h"
#include "appevents.h"
#include "usb_screen.h"
#include "skin_engine/skin_engine.h"
#include "playlist.h"
#include "misc.h"
#include "bitmaps/usblogo.h"
#ifdef HAVE_REMOTE_LCD
#include "bitmaps/remote_usblogo.h"
#endif
#if (CONFIG_STORAGE & STORAGE_MMC)
#include "ata_mmc.h"
#endif
#ifdef USB_ENABLE_HID
int usb_keypad_mode;
static bool usb_hid;
#endif
#ifndef SIMULATOR
static int handle_usb_events(void)
{
#if (CONFIG_STORAGE & STORAGE_MMC)
int next_update=0;
#endif /* STORAGE_MMC */
/* Don't return until we get SYS_USB_DISCONNECTED or SYS_TIMEOUT */
while(1)
{
int button;
#ifdef USB_ENABLE_HID
if (usb_hid)
{
button = get_hid_usb_action();
/* On mode change, we need to refresh the screen */
if (button == ACTION_USB_HID_MODE_SWITCH_NEXT ||
button == ACTION_USB_HID_MODE_SWITCH_PREV)
{
break;
}
}
else
#endif
{
button = button_get_w_tmo(HZ/2);
/* hid emits the event in get_action */
send_event(GUI_EVENT_ACTIONUPDATE, NULL);
}
switch(button)
{
case SYS_USB_DISCONNECTED:
return 1;
case SYS_CHARGER_DISCONNECTED:
reset_runtime();
break;
case SYS_TIMEOUT:
break;
}
#if (CONFIG_STORAGE & STORAGE_MMC) /* USB-MMC bridge can report activity */
if(TIME_AFTER(current_tick,next_update))
{
if(usb_inserted()) {
led(mmc_usb_active(HZ));
}
next_update=current_tick+HZ/2;
}
#endif /* STORAGE_MMC */
}
return 0;
}
#endif /* SIMULATOR */
#define MODE_NAME_LEN 32
struct usb_screen_vps_t
{
struct viewport parent;
struct viewport logo;
#ifdef USB_ENABLE_HID
struct viewport title;
#endif
};
static void usb_screen_fix_viewports(struct screen *screen,
struct usb_screen_vps_t *usb_screen_vps)
{
int logo_width, logo_height;
struct viewport *parent = &usb_screen_vps->parent;
struct viewport *logo = &usb_screen_vps->logo;
#ifdef HAVE_REMOTE_LCD
if (screen->screen_type == SCREEN_REMOTE)
{
logo_width = BMPWIDTH_remote_usblogo;
logo_height = BMPHEIGHT_remote_usblogo;
}
else
#endif
{
logo_width = BMPWIDTH_usblogo;
logo_height = BMPHEIGHT_usblogo;
}
viewportmanager_theme_enable(screen->screen_type, true, parent);
if (logo_width > parent->width)
logo_width = parent->width;
if (logo_height > parent->height)
logo_height = parent->height;
*logo = *parent;
logo->x = parent->x + parent->width - logo_width;
logo->y = parent->y + (parent->height - logo_height) / 2;
logo->width = logo_width;
logo->height = logo_height;
#ifdef USB_ENABLE_HID
if (usb_hid)
{
struct viewport *title = &usb_screen_vps->title;
int char_height = font_get(parent->font)->height;
*title = *parent;
title->y = logo->y + logo->height + char_height;
title->height = char_height;
/* try to fit logo and title to parent */
if (parent->y + parent->height < title->y + title->height)
{
logo->y = parent->y;
title->y = parent->y + logo->height;
}
}
#endif
}
static void usb_screens_draw(struct usb_screen_vps_t *usb_screen_vps_ar)
{
LCD core move buf ptr and address look up function viewport struct I'm currently running up against the limitations of the lcd_draw functions I want these functions to be able to be used on any size buffer not just buffers with a stride matching the underlying device [DONE] allow the framebuffer to be decoupled from the device framebuffer [DONE need examples] allow for some simple blit like transformations [DONE] remove the device framebuffer from the plugin api [DONE}ditto remote framebuffer [DONE] remove _viewport_get_framebuffer you can call struct *vp = lcd_set_viewport(NULL) and vp->buffer->fb_ptr while remote lcds may compile (and work in the sim) its not been tested on targets [FIXED] backdrops need work to be screen agnostic [FIXED] screen statusbar is not being combined into the main viewport correctly yet [FIXED] screen elements are displayed incorrectly after switch to void* [FIXED] core didn't restore proper viewport on splash etc. [NEEDS TESTING] remote lcd garbled data [FIXED] osd lib garbled screen on bmp_part [FIXED] grey_set_vp needs to return old viewport like lcd_set_viewport [FIXED] Viewport update now handles viewports with differing buffers/strides by copying to the main buffer [FIXED] splash on top of WPS leaves old framebuffer data (doesn't redraw) [UPDATE] refined this a bit more to have clear_viewport set the clean bit and have skin_render do its own screen clear scrolling viewports no longer trigger wps refresh also fixed a bug where guisyncyesno was displaying and then disappearing [ADDED!] New LCD macros that allow you to create properly size frame buffers in you desired size without wasting bytes (LCD_ and LCD_REMOTE_) LCD_STRIDE(w, h) same as STRIDE_MAIN LCD_FBSTRIDE(w, h) returns target specific stride for a buffer W x H LCD_NBELEMS(w, h) returns the number of fb_data sized elemenst needed for a buffer W x H LCD_NATIVE_STRIDE(s) conversion between rockbox native vertical and lcd native stride (2bitH) test_viewports.c has an example of usage [FIXED!!] 2bit targets don't respect non-native strides [FIXED] Few define snags Change-Id: I0d04c3834e464eca84a5a715743a297a0cefd0af
2020-10-07 06:01:35 +00:00
struct viewport *last_vp;
static const struct bitmap* logos[NB_SCREENS] = {
&bm_usblogo,
#ifdef HAVE_REMOTE_LCD
&bm_remote_usblogo,
#endif
};
FOR_NB_SCREENS(i)
{
struct screen *screen = &screens[i];
struct usb_screen_vps_t *usb_screen_vps = &usb_screen_vps_ar[i];
struct viewport *parent = &usb_screen_vps->parent;
struct viewport *logo = &usb_screen_vps->logo;
LCD core move buf ptr and address look up function viewport struct I'm currently running up against the limitations of the lcd_draw functions I want these functions to be able to be used on any size buffer not just buffers with a stride matching the underlying device [DONE] allow the framebuffer to be decoupled from the device framebuffer [DONE need examples] allow for some simple blit like transformations [DONE] remove the device framebuffer from the plugin api [DONE}ditto remote framebuffer [DONE] remove _viewport_get_framebuffer you can call struct *vp = lcd_set_viewport(NULL) and vp->buffer->fb_ptr while remote lcds may compile (and work in the sim) its not been tested on targets [FIXED] backdrops need work to be screen agnostic [FIXED] screen statusbar is not being combined into the main viewport correctly yet [FIXED] screen elements are displayed incorrectly after switch to void* [FIXED] core didn't restore proper viewport on splash etc. [NEEDS TESTING] remote lcd garbled data [FIXED] osd lib garbled screen on bmp_part [FIXED] grey_set_vp needs to return old viewport like lcd_set_viewport [FIXED] Viewport update now handles viewports with differing buffers/strides by copying to the main buffer [FIXED] splash on top of WPS leaves old framebuffer data (doesn't redraw) [UPDATE] refined this a bit more to have clear_viewport set the clean bit and have skin_render do its own screen clear scrolling viewports no longer trigger wps refresh also fixed a bug where guisyncyesno was displaying and then disappearing [ADDED!] New LCD macros that allow you to create properly size frame buffers in you desired size without wasting bytes (LCD_ and LCD_REMOTE_) LCD_STRIDE(w, h) same as STRIDE_MAIN LCD_FBSTRIDE(w, h) returns target specific stride for a buffer W x H LCD_NBELEMS(w, h) returns the number of fb_data sized elemenst needed for a buffer W x H LCD_NATIVE_STRIDE(s) conversion between rockbox native vertical and lcd native stride (2bitH) test_viewports.c has an example of usage [FIXED!!] 2bit targets don't respect non-native strides [FIXED] Few define snags Change-Id: I0d04c3834e464eca84a5a715743a297a0cefd0af
2020-10-07 06:01:35 +00:00
last_vp = screen->set_viewport(parent);
screen->clear_viewport();
screen->backlight_on();
screen->set_viewport(logo);
screen->bmp(logos[i], 0, 0);
if (i == SCREEN_MAIN)
{
#ifdef USB_ENABLE_HID
if (usb_hid)
{
char modestring[100];
screen->set_viewport(&usb_screen_vps->title);
usb_screen_vps->title.flags |= VP_FLAG_ALIGN_CENTER;
snprintf(modestring, sizeof(modestring), "%s: %s",
str(LANG_USB_KEYPAD_MODE),
str(keypad_mode_name_get()));
screen->puts_scroll(0, 0, modestring);
}
#endif /* USB_ENABLE_HID */
}
screen->set_viewport(parent);
LCD core move buf ptr and address look up function viewport struct I'm currently running up against the limitations of the lcd_draw functions I want these functions to be able to be used on any size buffer not just buffers with a stride matching the underlying device [DONE] allow the framebuffer to be decoupled from the device framebuffer [DONE need examples] allow for some simple blit like transformations [DONE] remove the device framebuffer from the plugin api [DONE}ditto remote framebuffer [DONE] remove _viewport_get_framebuffer you can call struct *vp = lcd_set_viewport(NULL) and vp->buffer->fb_ptr while remote lcds may compile (and work in the sim) its not been tested on targets [FIXED] backdrops need work to be screen agnostic [FIXED] screen statusbar is not being combined into the main viewport correctly yet [FIXED] screen elements are displayed incorrectly after switch to void* [FIXED] core didn't restore proper viewport on splash etc. [NEEDS TESTING] remote lcd garbled data [FIXED] osd lib garbled screen on bmp_part [FIXED] grey_set_vp needs to return old viewport like lcd_set_viewport [FIXED] Viewport update now handles viewports with differing buffers/strides by copying to the main buffer [FIXED] splash on top of WPS leaves old framebuffer data (doesn't redraw) [UPDATE] refined this a bit more to have clear_viewport set the clean bit and have skin_render do its own screen clear scrolling viewports no longer trigger wps refresh also fixed a bug where guisyncyesno was displaying and then disappearing [ADDED!] New LCD macros that allow you to create properly size frame buffers in you desired size without wasting bytes (LCD_ and LCD_REMOTE_) LCD_STRIDE(w, h) same as STRIDE_MAIN LCD_FBSTRIDE(w, h) returns target specific stride for a buffer W x H LCD_NBELEMS(w, h) returns the number of fb_data sized elemenst needed for a buffer W x H LCD_NATIVE_STRIDE(s) conversion between rockbox native vertical and lcd native stride (2bitH) test_viewports.c has an example of usage [FIXED!!] 2bit targets don't respect non-native strides [FIXED] Few define snags Change-Id: I0d04c3834e464eca84a5a715743a297a0cefd0af
2020-10-07 06:01:35 +00:00
screen->set_viewport(last_vp);
screen->update_viewport();
}
}
void gui_usb_screen_run(bool early_usb)
{
(void) early_usb;
struct usb_screen_vps_t usb_screen_vps_ar[NB_SCREENS];
#if defined HAVE_TOUCHSCREEN
enum touchscreen_mode old_mode = touchscreen_get_mode();
/* TODO: Paint buttons on screens OR switch to point mode and use
* touchscreen as a touchpad to move the host's mouse cursor */
touchscreen_set_mode(TOUCHSCREEN_BUTTON);
#endif
push_current_activity(ACTIVITY_USBSCREEN);
#ifdef USB_ENABLE_HID
usb_hid = global_settings.usb_hid;
usb_keypad_mode = global_settings.usb_keypad_mode;
#endif
FOR_NB_SCREENS(i)
{
struct screen *screen = &screens[i];
/* we might be coming from anywhere, and the originating screen
* can't be practically expected to cleanup the UI because
* we're invoked via default_event_handler(), therefore we make a
* generic cleanup here */
screen->set_viewport(NULL);
screen->scroll_stop();
usb_screen_fix_viewports(screen, &usb_screen_vps_ar[i]);
}
/* update the UI before disabling fonts, this maximizes the propability
* that font cache lookups succeed during USB */
send_event(GUI_EVENT_ACTIONUPDATE, NULL);
if(!early_usb)
{
/* The font system leaves the .fnt fd's open, so we need for force close them all */
font_disable_all();
}
usb_acknowledge(SYS_USB_CONNECTED_ACK);
while (1)
{
usb_screens_draw(usb_screen_vps_ar);
#ifdef SIMULATOR
if (button_get_w_tmo(HZ/2))
break;
send_event(GUI_EVENT_ACTIONUPDATE, NULL);
#else
if (handle_usb_events())
break;
#endif /* SIMULATOR */
}
FOR_NB_SCREENS(i)
{
const struct viewport* vp = NULL;
#if defined(USB_ENABLE_HID)
vp = usb_hid ? &usb_screen_vps_ar[i].title : NULL;
#endif
if (vp)
screens[i].scroll_stop_viewport(vp);
}
#ifdef USB_ENABLE_HID
if (global_settings.usb_keypad_mode != usb_keypad_mode)
{
global_settings.usb_keypad_mode = usb_keypad_mode;
settings_save();
}
#endif
#ifdef HAVE_TOUCHSCREEN
touchscreen_set_mode(old_mode);
#endif
if(!early_usb)
{
font_enable_all();
/* Not pretty, reload all settings so fonts are loaded again correctly */
settings_apply(true);
/* Reload playlist */
playlist_resume();
}
FOR_NB_SCREENS(i)
{
screens[i].backlight_on();
viewportmanager_theme_undo(i, false);
}
pop_current_activity();
}