rockbox/apps/recorder/recording.c

1831 lines
61 KiB
C
Raw Normal View History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2002 by Linus Nielsen Feltzing
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include <stdio.h>
#include <stdbool.h>
#include <stdlib.h>
#include "system.h"
#include "power.h"
#include "powermgmt.h"
#include "lcd.h"
#include "led.h"
#include "audio.h"
#include "thread.h"
#include "enc_config.h"
#include "playback.h"
#if defined(HAVE_SPDIF_IN) || defined(HAVE_SPDIF_OUT)
#include "spdif.h"
#endif
#include "pcm_record.h"
#include "recording.h"
#include "button.h"
#include "kernel.h"
#include "settings.h"
#include "lang.h"
#include "font.h"
#include "icons.h"
#include "icon.h"
#include "screens.h"
#include "peakmeter.h"
#include "menu.h"
#include "sound_menu.h"
#include "timefuncs.h"
#include "debug.h"
#include "misc.h"
Rewrite filesystem code (WIP) This patch redoes the filesystem code from the FAT driver up to the clipboard code in onplay.c. Not every aspect of this is finished therefore it is still "WIP". I don't wish to do too much at once (haha!). What is left to do is get dircache back in the sim and find an implementation for the dircache indicies in the tagcache and playlist code or do something else that has the same benefit. Leaving these out for now does not make anything unusable. All the basics are done. Phone app code should probably get vetted (and app path handling just plain rewritten as environment expansions); the SDL app and Android run well. Main things addressed: 1) Thread safety: There is none right now in the trunk code. Most of what currently works is luck when multiple threads are involved or multiple descriptors to the same file are open. 2) POSIX compliance: Many of the functions behave nothing like their counterparts on a host system. This leads to inconsistent code or very different behavior from native to hosted. One huge offender was rename(). Going point by point would fill a book. 3) Actual running RAM usage: Many targets will use less RAM and less stack space (some more RAM because I upped the number of cache buffers for large memory). There's very little memory lying fallow in rarely-used areas (see 'Key core changes' below). Also, all targets may open the same number of directory streams whereas before those with less than 8MB RAM were limited to 8, not 12 implying those targets will save slightly less. 4) Performance: The test_disk plugin shows markedly improved performance, particularly in the area of (uncached) directory scanning, due partly to more optimal directory reading and to a better sector cache algorithm. Uncached times tend to be better while there is a bit of a slowdown in dircache due to it being a bit heavier of an implementation. It's not noticeable by a human as far as I can say. Key core changes: 1) Files and directories share core code and data structures. 2) The filesystem code knows which descriptors refer to same file. This ensures that changes from one stream are appropriately reflected in every open descriptor for that file (fileobj_mgr.c). 3) File and directory cache buffers are borrowed from the main sector cache. This means that when they are not in use by a file, they are not wasted, but used for the cache. Most of the time, only a few of them are needed. It also means that adding more file and directory handles is less expensive. All one must do in ensure a large enough cache to borrow from. 4) Relative path components are supported and the namespace is unified. It does not support full relative paths to an implied current directory; what is does support is use of "." and "..". Adding the former would not be very difficult. The namespace is unified in the sense that volumes may be specified several times along with relative parts, e.g.: "/<0>/foo/../../<1>/bar" :<=> "/<1>/bar". 5) Stack usage is down due to sharing of data, static allocation and less duplication of strings on the stack. This requires more serialization than I would like but since the number of threads is limited to a low number, the tradoff in favor of the stack seems reasonable. 6) Separates and heirarchicalizes (sic) the SIM and APP filesystem code. SIM path and volume handling is just like the target. Some aspects of the APP file code get more straightforward (e.g. no path hashing is needed). Dircache: Deserves its own section. Dircache is new but pays homage to the old. The old one was not compatible and so it, since it got redone, does all the stuff it always should have done such as: 1) It may be update and used at any time during the build process. No longer has one to wait for it to finish building to do basic file management (create, remove, rename, etc.). 2) It does not need to be either fully scanned or completely disabled; it can be incomplete (i.e. overfilled, missing paths), still be of benefit and be correct. 3) Handles mounting and dismounting of individual volumes which means a full rebuild is not needed just because you pop a new SD card in the slot. Now, because it reuses its freed entry data, may rebuild only that volume. 4) Much more fundamental to the file code. When it is built, it is the keeper of the master file list whether enabled or not ("disabled" is just a state of the cache). Its must always to ready to be started and bind all streams opened prior to being enabled. 5) Maintains any short filenames in OEM format which means that it does not need to be rebuilt when changing the default codepage. Miscellaneous Compatibility: 1) Update any other code that would otherwise not work such as the hotswap mounting code in various card drivers. 2) File management: Clipboard needed updating because of the behavioral changes. Still needs a little more work on some finer points. 3) Remove now-obsolete functionality such as the mutex's "no preempt" flag (which was only for the prior FAT driver). 4) struct dirinfo uses time_t rather than raw FAT directory entry time fields. I plan to follow up on genericizing everything there (i.e. no FAT attributes). 5) unicode.c needed some redoing so that the file code does not try try to load codepages during a scan, which is actually a problem with the current code. The default codepage, if any is required, is now kept in RAM separarately (bufalloced) from codepages specified to iso_decode() (which must not be bufalloced because the conversion may be done by playback threads). Brings with it some additional reusable core code: 1) Revised file functions: Reusable code that does things such as safe path concatenation and parsing without buffer limitations or data duplication. Variants that copy or alter the input path may be based off these. To do: 1) Put dircache functionality back in the sim. Treating it internally as a different kind of file system seems the best approach at this time. 2) Restore use of dircache indexes in the playlist and database or something effectively the same. Since the cache doesn't have to be complete in order to be used, not getting a hit on the cache doesn't unambiguously say if the path exists or not. Change-Id: Ia30f3082a136253e3a0eae0784e3091d138915c8 Reviewed-on: http://gerrit.rockbox.org/566 Reviewed-by: Michael Sevakis <jethead71@rockbox.org> Tested: Michael Sevakis <jethead71@rockbox.org>
2013-08-06 02:02:45 +00:00
#include "pathfuncs.h"
#include "tree.h"
#include "string.h"
#include "dir.h"
#include "errno.h"
#include "talk.h"
#include "sound.h"
#include "storage.h"
#if (CONFIG_STORAGE & STORAGE_ATA) && (CONFIG_LED == LED_REAL) \
&& !defined(SIMULATOR)
#include "ata.h"
#endif
#include "splash.h"
#include "screen_access.h"
#include "action.h"
#include "radio.h"
#include "viewport.h"
#include "list.h"
#include "general.h"
#include "appevents.h"
#ifdef HAVE_RECORDING
/* This array holds the record size interval lengths, in mebibytes */
static const unsigned short rec_size_mbytes[] =
{
0, /* 0 means OFF */
5, /* 5MB */
10, /* 10MB */
15, /* 15MB */
32, /* 32MB */
64, /* 64MB */
75, /* 75MB */
100, /* 100MB */
128, /* 128MB */
256, /* 256MB */
512, /* 512MB */
650, /* 650MB */
700, /* 700MB */
1024, /* 1GB */
1536, /* 1.5GB */
1792, /* 1.75GB */
};
static unsigned long rec_sizesplit_bytes(void)
{
unsigned long sz_mbytes = rec_size_mbytes[global_settings.rec_sizesplit];
unsigned long sz_bytes = sz_mbytes << 20;
return sz_bytes;
}
void settings_apply_trigger(void)
{
int start_thres, stop_thres;
if (global_settings.peak_meter_dbfs)
{
start_thres = global_settings.rec_start_thres_db - 1;
stop_thres = global_settings.rec_stop_thres_db - 1;
}
else
{
start_thres = global_settings.rec_start_thres_linear;
stop_thres = global_settings.rec_stop_thres_linear;
}
peak_meter_define_trigger(
start_thres,
global_settings.rec_start_duration*HZ,
MIN(global_settings.rec_start_duration*HZ / 2, 2*HZ),
stop_thres,
global_settings.rec_stop_postrec*HZ,
global_settings.rec_stop_gap*HZ
);
}
/* recording screen status flags */
enum rec_status_flags
{
RCSTAT_IN_RECSCREEN = 0x00000001,
RCSTAT_BEEN_IN_USB_MODE = 0x00000002,
RCSTAT_CREATED_DIRECTORY = 0x00000004,
RCSTAT_HAVE_RECORDED = 0x00000008,
};
static int rec_status = 0;
bool in_recording_screen(void)
{
return (rec_status & RCSTAT_IN_RECSCREEN) != 0;
}
#define MAX_FILE_SIZE 0x7F800000 /* 2 GB - 4 MB */
#ifndef HAVE_REMOTE_LCD
static const int screen_update = NB_SCREENS;
#else
static int screen_update = NB_SCREENS;
static bool remote_display_on = true;
#endif
/* as we have the ability to disable the remote, we need an alternative loop */
#define FOR_NB_ACTIVE_SCREENS(i) for(int i = 0; i < screen_update; i++)
static bool update_list = false; /* (GIU) list needs updating */
/** File name creation **/
#if CONFIG_RTC == 0
/* current file number to assist in creating unique numbered filenames
without actually having to create the file on disk */
static int file_number = -1;
#endif /* CONFIG_RTC */
#define REC_FILE_ENDING(rec_format) \
(audio_formats[rec_format_afmt[rec_format]].ext_list)
/* path for current file */
static char path_buffer[MAX_PATH];
/** Automatic Gain Control (AGC) **/
#ifdef HAVE_AGC
/* Timing counters:
* peak_time is incremented every 0.2s, every 2nd run of record screen loop.
* hist_time is incremented every 0.5s, display update.
* peak_time is the counter of the peak hold read and agc process,
* overflow every 13 years 8-)
*/
static long peak_time = 0;
static short peak_valid_mem[4];
#define BAL_MEM_SIZE 24
static short balance_mem[BAL_MEM_SIZE];
/* Automatic Gain Control */
#define AGC_MODE_SIZE 5
#define AGC_SAFETY_MODE 0
static const char* agc_preset_str[] =
{ "Off", "S", "L", "D", "M", "V" };
/* "Off",
"Safety (clip)",
"Live (slow)",
"DJ-Set (slow)",
"Medium",
"Voice (fast)" */
#define AGC_CLIP 32766
#define AGC_PEAK 29883 /* fast gain reduction threshold -0.8dB */
#define AGC_HIGH 27254 /* accelerated gain reduction threshold -1.6dB */
#define AGC_IMG 823 /* threshold for balance control -32dB */
/* autogain high level thresholds (-3dB, -7dB, -4dB, -5dB, -5dB) */
static const short agc_th_hi[AGC_MODE_SIZE] =
{ 23197, 14637, 21156, 18428, 18426 };
/* autogain low level thresholds (-14dB, -11dB, -6dB, -7dB, -8dB) */
static const short agc_th_lo[AGC_MODE_SIZE] =
{ 6538, 9235, 16422, 14636, 13045 };
/* autogain threshold times [1/5s] or [200ms] */
static const short agc_tdrop[AGC_MODE_SIZE] =
{ 900, 225, 150, 60, 8 };
static const short agc_trise[AGC_MODE_SIZE] =
{ 9000, 750, 400, 150, 20 };
static const short agc_tbal[AGC_MODE_SIZE] =
{ 4500, 500, 300, 100, 15 };
/* AGC operation */
static bool agc_enable = true;
static short agc_preset;
/* AGC levels */
static int agc_left = 0;
static int agc_right = 0;
/* AGC time since high target volume was exceeded */
static short agc_droptime = 0;
/* AGC time since volume fallen below low target */
static short agc_risetime = 0;
/* AGC balance time exceeding +/- 0.7dB */
static short agc_baltime = 0;
/* AGC maximum gain */
static short agc_maxgain;
#endif /* HAVE_AGC */
#if defined(HAVE_AGC)
static long hist_time = 0;
#endif /* HAVE_AGC */
static void set_gain(void)
{
#ifdef HAVE_MIC_REC
if(global_settings.rec_source == AUDIO_SRC_MIC)
{
if (global_settings.rec_mic_gain > sound_max(SOUND_MIC_GAIN))
global_settings.rec_mic_gain = sound_max(SOUND_MIC_GAIN);
if (global_settings.rec_mic_gain < sound_min(SOUND_MIC_GAIN))
global_settings.rec_mic_gain = sound_min(SOUND_MIC_GAIN);
audio_set_recording_gain(global_settings.rec_mic_gain,
0, AUDIO_GAIN_MIC);
}
else
#endif /* MIC */
{
if (global_settings.rec_left_gain > sound_max(SOUND_LEFT_GAIN))
global_settings.rec_left_gain = sound_max(SOUND_LEFT_GAIN);
if (global_settings.rec_left_gain < sound_min(SOUND_LEFT_GAIN))
global_settings.rec_left_gain = sound_min(SOUND_LEFT_GAIN);
if (global_settings.rec_right_gain > sound_max(SOUND_RIGHT_GAIN))
global_settings.rec_right_gain = sound_max(SOUND_RIGHT_GAIN);
if (global_settings.rec_right_gain < sound_min(SOUND_RIGHT_GAIN))
global_settings.rec_right_gain = sound_min(SOUND_RIGHT_GAIN);
/* AUDIO_SRC_LINEIN, AUDIO_SRC_FMRADIO, AUDIO_SRC_SPDIF */
audio_set_recording_gain(global_settings.rec_left_gain,
global_settings.rec_right_gain,
AUDIO_GAIN_LINEIN);
}
/* reset the clipping indicators */
peak_meter_set_clip_hold(global_settings.peak_meter_clip_hold);
update_list = true;
}
#ifdef HAVE_AGC
/* Read peak meter values & calculate balance.
* Returns validity of peak values.
* Used for automatic gain control and history diagram.
*/
static bool read_peak_levels(int *peak_l, int *peak_r, int *balance)
{
peak_meter_get_peakhold(peak_l, peak_r);
peak_valid_mem[peak_time % 3] = *peak_l;
if (((peak_valid_mem[0] == peak_valid_mem[1]) &&
(peak_valid_mem[1] == peak_valid_mem[2])) &&
((*peak_l < 32767) || storage_disk_is_active()))
return false;
if (*peak_r > *peak_l)
balance_mem[peak_time % BAL_MEM_SIZE] = (*peak_l ?
MIN((10000 * *peak_r) / *peak_l - 10000, 15118) : 15118);
else
balance_mem[peak_time % BAL_MEM_SIZE] = (*peak_r ?
MAX(10000 - (10000 * *peak_l) / *peak_r, -15118) : -15118);
*balance = 0;
int i;
for (i = 0; i < BAL_MEM_SIZE; i++)
*balance += balance_mem[i];
*balance = *balance / BAL_MEM_SIZE;
return true;
}
/* AGC helper function to check if maximum gain is reached */
static bool agc_gain_is_max(bool left, bool right)
{
/* range -128...+108 [0.5dB] */
short gain_current_l;
short gain_current_r;
if (agc_preset == 0)
return false;
switch (global_settings.rec_source)
{
#if defined(HAVE_LINE_REC) || defined(HAVE_FMRADIO_REC)
HAVE_LINE_REC_(case AUDIO_SRC_LINEIN:)
HAVE_FMRADIO_REC_(case AUDIO_SRC_FMRADIO:)
gain_current_l = global_settings.rec_left_gain;
gain_current_r = global_settings.rec_right_gain;
break;
#endif /* LINE, FMRADIO */
#if defined(HAVE_MIC_REC)
case AUDIO_SRC_MIC:
default:
gain_current_l = global_settings.rec_mic_gain;
gain_current_r = global_settings.rec_mic_gain;
#endif /* MIC */
}
return ((left && (gain_current_l >= agc_maxgain)) ||
(right && (gain_current_r >= agc_maxgain)));
}
static void change_recording_gain(bool increment, bool left, bool right)
{
int factor = (increment ? 1 : -1);
switch (global_settings.rec_source)
{
#if defined(HAVE_LINE_REC) || defined(HAVE_FMRADIO_REC)
HAVE_LINE_REC_(case AUDIO_SRC_LINEIN:)
HAVE_FMRADIO_REC_(case AUDIO_SRC_FMRADIO:)
if (left) global_settings.rec_left_gain +=
factor * sound_steps(SOUND_LEFT_GAIN);
if (right) global_settings.rec_right_gain +=
factor * sound_steps(SOUND_RIGHT_GAIN);
break;
#endif /* LINE, FMRADIO */
#if defined(HAVE_MIC_REC)
case AUDIO_SRC_MIC:
global_settings.rec_mic_gain += factor * sound_steps(SOUND_MIC_GAIN);
#endif
}
}
/*
* Handle automatic gain control (AGC).
* Change recording gain if peak_x levels are above or below
* target volume for specified timeouts.
*/
static void auto_gain_control(int *peak_l, int *peak_r, int *balance)
{
int agc_mono;
short agc_mode;
bool increment;
if (*peak_l > agc_left)
agc_left = *peak_l;
else
agc_left -= (agc_left - *peak_l + 3) >> 2;
if (*peak_r > agc_right)
agc_right = *peak_r;
else
agc_right -= (agc_right - *peak_r + 3) >> 2;
agc_mono = (agc_left + agc_right) / 2;
agc_mode = abs(agc_preset) - 1;
if (agc_mode < 0) {
agc_enable = false;
return;
}
if (agc_mode != AGC_SAFETY_MODE) {
/* Automatic balance control - only if not in safety mode */
if ((agc_left > AGC_IMG) && (agc_right > AGC_IMG))
{
if (*balance < -556)
{
if (*balance > -900)
agc_baltime -= !(peak_time % 4); /* 0.47 - 0.75dB */
else if (*balance > -4125)
agc_baltime--; /* 0.75 - 3.00dB */
else if (*balance > -7579)
agc_baltime -= 2; /* 3.00 - 4.90dB */
else
agc_baltime -= !(peak_time % 8); /* 4.90 - inf dB */
if (agc_baltime > 0)
agc_baltime -= (peak_time % 2);
}
else if (*balance > 556)
{
if (*balance < 900)
agc_baltime += !(peak_time % 4);
else if (*balance < 4125)
agc_baltime++;
else if (*balance < 7579)
agc_baltime += 2;
else
agc_baltime += !(peak_time % 8);
if (agc_baltime < 0)
agc_baltime += (peak_time % 2);
}
if ((*balance * agc_baltime) < 0)
{
if (*balance < 0)
agc_baltime -= peak_time % 2;
else
agc_baltime += peak_time % 2;
}
increment = ((agc_risetime / 2) > agc_droptime);
if (agc_baltime < -agc_tbal[agc_mode])
{
if (!increment || !agc_gain_is_max(!increment, increment)) {
change_recording_gain(increment, !increment, increment);
set_gain();
}
agc_baltime = 0;
}
else if (agc_baltime > +agc_tbal[agc_mode])
{
if (!increment || !agc_gain_is_max(increment, !increment)) {
change_recording_gain(increment, increment, !increment);
set_gain();
}
agc_baltime = 0;
}
}
else if (!(hist_time % 4))
{
if (agc_baltime < 0)
agc_baltime++;
else
agc_baltime--;
}
}
/* Automatic gain control */
if ((agc_left > agc_th_hi[agc_mode]) || (agc_right > agc_th_hi[agc_mode]))
{
if ((agc_left > AGC_CLIP) || (agc_right > AGC_CLIP))
agc_droptime += agc_tdrop[agc_mode] /
(global_settings.rec_agc_cliptime + 1);
if (agc_left > AGC_HIGH) {
agc_droptime++;
agc_risetime = 0;
if (agc_left > AGC_PEAK)
agc_droptime += 2;
}
if (agc_right > AGC_HIGH) {
agc_droptime++;
agc_risetime=0;
if (agc_right > AGC_PEAK)
agc_droptime += 2;
}
if (agc_mono > agc_th_hi[agc_mode])
agc_droptime++;
else
agc_droptime += !(peak_time % 2);
if (agc_droptime >= agc_tdrop[agc_mode])
{
change_recording_gain(false, true, true);
agc_droptime = 0;
agc_risetime = 0;
set_gain();
}
agc_risetime = MAX(agc_risetime - 1, 0);
}
else if (agc_mono < agc_th_lo[agc_mode])
{
if (agc_mono < (agc_th_lo[agc_mode] / 8))
agc_risetime += !(peak_time % 5);
else if (agc_mono < (agc_th_lo[agc_mode] / 2))
agc_risetime += 2;
else
agc_risetime++;
if (agc_risetime >= agc_trise[agc_mode]) {
if ((agc_mode != AGC_SAFETY_MODE) &&
(!agc_gain_is_max(true, true))) {
change_recording_gain(true, true, true);
set_gain();
}
agc_risetime = 0;
agc_droptime = 0;
}
agc_droptime = MAX(agc_droptime - 1, 0);
}
else if (!(peak_time % 6)) /* on target level every 1.2 sec */
{
agc_risetime = MAX(agc_risetime - 1, 0);
agc_droptime = MAX(agc_droptime - 1, 0);
}
}
#endif /* HAVE_AGC */
static char *fmt_gain(int snd, int val, char *str, int len)
{
format_sound_value(str, len, snd, val);
return str;
}
/* the list below must match enum audio_sources in audio.h */
static const char* const prestr[] =
{
HAVE_MIC_IN_([AUDIO_SRC_MIC] = "R_MIC_",)
HAVE_LINE_REC_([AUDIO_SRC_LINEIN] = "R_LINE_",)
HAVE_SPDIF_IN_([AUDIO_SRC_SPDIF] = "R_SPDIF_",)
HAVE_FMRADIO_REC_([AUDIO_SRC_FMRADIO] = "R_FM_",)
};
char *rec_create_filename(char *buffer)
{
char ext[16];
const char *pref = "R_";
/* Directory existence and writeablility should have already been
* verified - do not pass NULL pointers to pcmrec */
if((unsigned)global_settings.rec_source < AUDIO_NUM_SOURCES)
{
pref = prestr[global_settings.rec_source];
}
strcpy(buffer, !strcmp(global_settings.rec_directory, "/")?
"": global_settings.rec_directory);
snprintf(ext, sizeof(ext), ".%s",
REC_FILE_ENDING(global_settings.rec_format));
#if CONFIG_RTC == 0
return create_numbered_filename(buffer, buffer, pref, ext, 4,
&file_number);
#else
/* We'll wait at least up to the start of the next second so no duplicate
names are created */
return create_datetime_filename(buffer, buffer, pref, ext, true);
#endif
}
#if CONFIG_RTC == 0
/* Hit disk to get a starting filename for the type */
static void rec_init_filename(void)
{
file_number = -1;
rec_create_filename(path_buffer);
file_number--;
}
#endif
int rec_create_directory(void)
{
int rc = 0;
const char * const folder = global_settings.rec_directory;
if (strcmp(folder, "/") && !dir_exists(folder))
{
rc = mkdir(folder);
if(rc < 0)
{
while (action_userabort(HZ) == false)
{
splashf(0, "%s %s",
str(LANG_REC_DIR_NOT_WRITABLE),
str(LANG_OFF_ABORT));
}
}
else
{
rec_status |= RCSTAT_CREATED_DIRECTORY;
rc = 1;
}
}
return rc;
}
void rec_init_recording_options(struct audio_recording_options *options)
{
options->rec_source = global_settings.rec_source;
options->rec_frequency = global_settings.rec_frequency;
options->rec_channels = global_settings.rec_channels;
options->rec_prerecord_time = global_settings.rec_prerecord_time;
options->rec_mono_mode = global_settings.rec_mono_mode;
options->rec_source_flags = 0;
options->enc_config.rec_format = global_settings.rec_format;
global_to_encoder_config(&options->enc_config);
}
void rec_set_source(int source, unsigned flags)
{
/* Set audio input source, power up/down devices */
audio_set_input_source(source, flags);
/* Set peakmeters for recording or reset to playback */
peak_meter_playback((flags & SRCF_RECORDING) == 0);
peak_meter_enable(true);
}
void rec_set_recording_options(struct audio_recording_options *options)
{
rec_set_source(options->rec_source,
options->rec_source_flags | SRCF_RECORDING);
audio_set_recording_options(options);
}
void rec_command(enum recording_command cmd)
{
switch(cmd)
{
case RECORDING_CMD_STOP_SHUTDOWN:
pm_activate_clipcount(false);
audio_stop_recording();
audio_close_recording();
sys_poweroff();
break;
case RECORDING_CMD_STOP:
pm_activate_clipcount(false);
audio_stop_recording();
break;
case RECORDING_CMD_START:
/* steal mp3 buffer, create unique filename and start recording */
pm_reset_clipcount();
pm_activate_clipcount(true);
audio_record(rec_create_filename(path_buffer));
break;
case RECORDING_CMD_START_NEWFILE:
/* create unique filename and start recording*/
pm_reset_clipcount();
pm_activate_clipcount(true); /* just to be sure */
audio_new_file(rec_create_filename(path_buffer));
break;
case RECORDING_CMD_PAUSE:
pm_activate_clipcount(false);
audio_pause_recording();
break;
case RECORDING_CMD_RESUME:
pm_activate_clipcount(true);
audio_resume_recording();
break;
}
update_list = true;
}
/* used in trigger_listerner and recording_screen */
static unsigned int last_seconds = 0;
/**
* Callback function so that the peak meter code can send an event
* to this application. This function can be passed to
* peak_meter_set_trigger_listener in order to activate the trigger.
*/
static void trigger_listener(int trigger_status)
{
switch (trigger_status)
{
case TRIG_GO:
if(!(audio_status() & AUDIO_STATUS_RECORD))
{
rec_status |= RCSTAT_HAVE_RECORDED;
}
/* if we're already recording this is a retrigger */
else
{
if((audio_status() & AUDIO_STATUS_PAUSE) &&
(global_settings.rec_trigger_type == TRIG_TYPE_PAUSE))
{
rec_command(RECORDING_CMD_RESUME);
}
/* New file on trig start*/
else if (global_settings.rec_trigger_type != TRIG_TYPE_NEW_FILE)
{
rec_command(RECORDING_CMD_START_NEWFILE);
/* tell recording_screen to reset the time */
last_seconds = 0;
}
}
break;
/* A _change_ to TRIG_READY means the current recording has stopped */
case TRIG_READY:
if(audio_status() & AUDIO_STATUS_RECORD)
{
switch(global_settings.rec_trigger_type)
{
case TRIG_TYPE_STOP: /* Stop */
rec_command(RECORDING_CMD_STOP);
break;
case TRIG_TYPE_PAUSE: /* Pause */
rec_command(RECORDING_CMD_PAUSE);
break;
case TRIG_TYPE_NEW_FILE: /* New file on trig stop*/
rec_command(RECORDING_CMD_START_NEWFILE);
/* tell recording_screen to reset the time */
last_seconds = 0;
break;
case 3: /* Stop and shutdown */
rec_command(RECORDING_CMD_STOP_SHUTDOWN);
break;
}
if (global_settings.rec_trigger_mode != TRIG_MODE_REARM)
{
peak_meter_set_trigger_listener(NULL);
peak_meter_trigger(false);
}
}
break;
}
}
/* Stuff for drawing the screen */
enum rec_list_items_stereo {
ITEM_VOLUME = 0,
ITEM_GAIN = 1,
ITEM_GAIN_L = 2,
ITEM_GAIN_R = 3,
#ifdef HAVE_AGC
ITEM_AGC_MODE = 4,
ITEM_AGC_MAXDB = 5,
ITEM_FILENAME = 7,
ITEM_COUNT = 7,
#else
ITEM_FILENAME = 7,
ITEM_COUNT = 5,
#endif
};
enum rec_list_items_mono {
ITEM_VOLUME_M = 0,
ITEM_GAIN_M = 1,
#ifdef HAVE_AGC
ITEM_AGC_MODE_M = 4,
ITEM_AGC_MAXDB_M = 5,
ITEM_FILENAME_M = 7,
ITEM_COUNT_M = 5,
#else
ITEM_FILENAME_M = 7,
ITEM_COUNT_M = 3,
#endif
};
#ifdef HAVE_SPDIF_REC
enum rec_list_items_spdif {
ITEM_VOLUME_D = 0,
ITEM_SAMPLERATE_D = 6,
ITEM_FILENAME_D = 7,
ITEM_COUNT_D = 3,
};
#endif
static int listid_to_enum[ITEM_COUNT];
static const char* reclist_get_name(int selected_item, void * data,
char * buffer, size_t buffer_len)
{
char buf2[32];
#ifdef HAVE_AGC
char buf3[32];
#endif
(void)data; /* not used */
if(selected_item >= ITEM_COUNT)
return "";
switch (listid_to_enum[selected_item])
{
case ITEM_VOLUME:
snprintf(buffer, buffer_len, "%s: %s", str(LANG_VOLUME),
fmt_gain(SOUND_VOLUME,
global_settings.volume,
buf2, sizeof(buf2)));
break;
case ITEM_GAIN:
#ifdef HAVE_MIC_REC
if(global_settings.rec_source == AUDIO_SRC_MIC)
{
/* Draw MIC recording gain */
snprintf(buffer, buffer_len, "%s: %s", str(LANG_GAIN),
fmt_gain(SOUND_MIC_GAIN,
global_settings.rec_mic_gain,
buf2, sizeof(buf2)));
}
else
#endif /* MIC */
{
int avg_gain = (global_settings.rec_left_gain +
global_settings.rec_right_gain) / 2;
snprintf(buffer, buffer_len, "%s: %s", str(LANG_GAIN),
fmt_gain(SOUND_LEFT_GAIN,
avg_gain,
buf2, sizeof(buf2)));
}
break;
case ITEM_GAIN_L:
snprintf(buffer, buffer_len, "%s: %s",
str(LANG_GAIN_LEFT),
fmt_gain(SOUND_LEFT_GAIN,
global_settings.rec_left_gain,
buf2, sizeof(buf2)));
break;
case ITEM_GAIN_R:
snprintf(buffer, buffer_len, "%s: %s",
str(LANG_GAIN_RIGHT),
fmt_gain(SOUND_RIGHT_GAIN,
global_settings.rec_right_gain,
buf2, sizeof(buf2)));
break;
#ifdef HAVE_AGC
case ITEM_AGC_MODE:
snprintf(buffer, buffer_len, "%s: %s",
str(LANG_RECORDING_AGC_PRESET),
agc_preset_str[agc_preset]);
break;
case ITEM_AGC_MAXDB:
if (agc_preset == 0)
snprintf(buffer, buffer_len, "%s: %s",
str(LANG_RECORDING_AGC_MAXGAIN),
fmt_gain(SOUND_LEFT_GAIN,
agc_maxgain, buf2, sizeof(buf2)));
#ifdef HAVE_MIC_REC
else if (global_settings.rec_source == AUDIO_SRC_MIC)
snprintf(buffer, buffer_len, "%s: %s (%s)",
str(LANG_RECORDING_AGC_MAXGAIN),
fmt_gain(SOUND_MIC_GAIN,
agc_maxgain, buf2, sizeof(buf2)),
fmt_gain(SOUND_MIC_GAIN,
agc_maxgain - global_settings.rec_mic_gain,
buf3, sizeof(buf3)));
else
#endif /* MIC */
snprintf(buffer, buffer_len, "%s: %s (%s)",
str(LANG_RECORDING_AGC_MAXGAIN),
fmt_gain(SOUND_LEFT_GAIN,
agc_maxgain, buf2, sizeof(buf2)),
fmt_gain(SOUND_LEFT_GAIN,
agc_maxgain -
(global_settings.rec_left_gain +
global_settings.rec_right_gain)/2,
buf3, sizeof(buf3)));
break;
#endif
#ifdef HAVE_SPDIF_REC
case ITEM_SAMPLERATE_D:
snprintf(buffer, buffer_len, "%s: %lu",
str(LANG_FREQUENCY), pcm_rec_sample_rate());
break;
#endif
case ITEM_FILENAME:
{
if(audio_status() & AUDIO_STATUS_RECORD)
{
size_t tot_len = strlen(path_buffer) +
strlen(str(LANG_RECORDING_FILENAME)) + 1;
if(tot_len > buffer_len)
{
snprintf(buffer, buffer_len, "%s %s",
str(LANG_RECORDING_FILENAME),
path_buffer + tot_len - buffer_len);
}
else
{
snprintf(buffer, buffer_len, "%s %s",
str(LANG_RECORDING_FILENAME), path_buffer);
}
}
else
{
return str(LANG_RECORDING_FILENAME);
}
break;
}
default:
return "";
}
return buffer;
}
static void recording_step_levels(int setting_id, int steps)
{
steps *= sound_steps(setting_id);
switch(setting_id)
{
case SOUND_VOLUME:
global_settings.volume += steps;
setvol();
break;
case SOUND_LEFT_GAIN:
global_settings.rec_left_gain += steps;
break;
case SOUND_RIGHT_GAIN:
global_settings.rec_right_gain += steps;
break;
#ifdef HAVE_MIC_REC
case SOUND_MIC_GAIN:
global_settings.rec_mic_gain += steps;
break;
#endif /* MIC */
default:
break;
}
}
bool recording_start_automatic = false;
bool recording_screen(bool no_source)
{
int button;
int done = -1; /* negative to re-init, positive to quit, zero to run */
char buf[32]; /* for preparing strings */
char buf2[16]; /* for preparing strings */
int w, h; /* character width/height */
int update_countdown = 0; /* refresh counter */
unsigned int seconds;
int hours, minutes;
int audio_stat = 0; /* status of the audio system */
int last_audio_stat = -1; /* previous status so we can act on changes */
struct viewport vp_list[NB_SCREENS], vp_top[NB_SCREENS]; /* the viewports */
const unsigned long split_seconds = (unsigned) global_settings.rec_timesplit * 60;
const unsigned long split_bytes = rec_sizesplit_bytes();
int warning_counter = 0;
#define WARNING_PERIOD 7
#ifdef HAVE_SPDIF_REC
unsigned long prev_sample_rate = 0;
#endif
#ifdef HAVE_FMRADIO_REC
/* Radio is left on if:
* 1) Is was on at the start and the initial source is FM Radio
* 2) 1) and the source was never changed to something else
*/
int radio_status = (global_settings.rec_source != AUDIO_SRC_FMRADIO) ?
FMRADIO_OFF : get_radio_status();
#endif
#if (CONFIG_LED == LED_REAL)
bool led_state = false;
int led_countdown = 2;
#endif
#ifdef HAVE_AGC
bool peak_read = false;
int peak_l, peak_r;
int balance = 0;
#endif
int pm_x[NB_SCREENS]; /* peakmeter (and trigger bar) x pos */
int pm_y[NB_SCREENS]; /* peakmeter y pos */
int pm_h[NB_SCREENS]; /* peakmeter height */
int trig_ypos[NB_SCREENS]; /* trigger bar y pos */
int trig_width[NB_SCREENS]; /* trigger bar width */
int top_height_req[NB_SCREENS]; /* required height for top half */
/* tweak layout tiny screens / big fonts */
bool compact_view[NB_SCREENS] = { false };
struct gui_synclist lists; /* the list in the bottom vp */
#if defined(HAVE_AGC)
bool peak_valid = false;
#endif
#if defined(HAVE_HISTOGRAM)
unsigned short hist_pos_y = 0;
unsigned short hist_size_h = 0;
#endif
#ifdef HAVE_FMRADIO_REC
int prev_rec_source = global_settings.rec_source; /* detect source change */
#endif
struct audio_recording_options rec_options;
rec_status = RCSTAT_IN_RECSCREEN;
push_current_activity(ACTIVITY_RECORDING);
#if (CONFIG_STORAGE & STORAGE_ATA) && (CONFIG_LED == LED_REAL) \
&& !defined(SIMULATOR)
ata_set_led_enabled(false);
#endif
/* hardware samplerate gets messed up so prevent mixer playing */
int keyclick = global_settings.keyclick;
global_settings.keyclick = 0;
/* recording_menu gets messed up: so prevent manus talking */
talk_disable(true);
/* audio_init_recording stops anything playing when it takes the audio
buffer */
#ifdef HAVE_AGC
peak_meter_get_peakhold(&peak_l, &peak_r);
#endif
pm_reset_clipcount();
pm_activate_clipcount(false);
settings_apply_trigger();
#ifdef HAVE_AGC
agc_preset_str[0] = str(LANG_OFF);
agc_preset_str[1] = str(LANG_AGC_SAFETY);
agc_preset_str[2] = str(LANG_AGC_LIVE);
agc_preset_str[3] = str(LANG_AGC_DJSET);
agc_preset_str[4] = str(LANG_AGC_MEDIUM);
agc_preset_str[5] = str(LANG_AGC_VOICE);
#endif /* HAVE_AGC */
#ifdef HAVE_SPEAKER
/* Disable speaker to prevent feedback */
audio_enable_speaker(0);
#endif
audio_init_recording();
sound_set_volume(global_settings.volume);
#if CONFIG_RTC == 0
/* Create new filename for recording start */
rec_init_filename();
#endif
/* start of the loop: we stay in this loop until user quits recscreen */
while(done <= 0)
{
if(done < 0)
{
/* request to re-init stuff, done after settings screen */
done = 0;
#ifdef HAVE_FMRADIO_REC
/* If input changes away from FM Radio,
radio will remain off when recording screen closes. */
if (global_settings.rec_source != prev_rec_source
&& prev_rec_source == AUDIO_SRC_FMRADIO)
radio_status = FMRADIO_OFF;
prev_rec_source = global_settings.rec_source;
#endif
/* viewport init and calculations that only needs to be done once */
FOR_NB_SCREENS(i)
{
struct viewport *v;
/* top vp, 4 lines, force sys font if total screen < 6 lines
NOTE: one could limit the list to 1 line and get away with 5 lines */
top_height_req[i] = 4;
#if defined(HAVE_HISTOGRAM)
if((global_settings.histogram_interval) && (!i))
top_height_req[i] += 1; /* use one line for histogram */
#endif
v = &vp_top[i];
viewport_set_defaults(v, i);
if (viewport_get_nb_lines(v) < top_height_req[i])
{
/* compact needs 4 lines total */
v->font = FONT_SYSFIXED;
compact_view[i] = false;
}
else
{
/*top=4,list=2*/
if (viewport_get_nb_lines(v) < (top_height_req[i]+2))
compact_view[i] = true;
else
compact_view[i] = false;
}
vp_list[i] = *v; /* get a copy now so it can be sized more easily */
v->height = (font_get(v->font)->height)*(compact_view[i] ? 3 :
top_height_req[i]);
/* list section, rest of the screen */
vp_list[i].y += vp_top[i].height;
vp_list[i].height -= vp_top[i].height;
screens[i].set_viewport(&vp_top[i]); /* req for next calls */
screens[i].getstringsize("W", &w, &h);
pm_y[i] = font_get(vp_top[i].font)->height * 2;
trig_ypos[i] = font_get(vp_top[i].font)->height * 3;
if(compact_view[i])
trig_ypos[i] -= (font_get(vp_top[i].font)->height)/2;
}
/* init the bottom list */
gui_synclist_init(&lists, reclist_get_name, NULL, false, 1, vp_list);
gui_synclist_set_title(&lists, NULL, Icon_NOICON);
send_event(GUI_EVENT_ACTIONUPDATE, (void*)1); /* force a redraw */
#if defined(HAVE_HISTOGRAM)
hist_pos_y = (compact_view[0] ? 3 : 4) * (font_get(vp_top[0].font)->height)
+ 1;
hist_size_h = font_get(vp_top[0].font)->height - 2;
histogram_init();
#endif
FOR_NB_SCREENS(i)
{
pm_x[i] = 0;
if(global_settings.peak_meter_clipcounter)
{
int clipwidth = 0;
screens[i].getstringsize(str(LANG_PM_CLIPCOUNT),
&clipwidth, &h); /* h is same */
pm_x[i] = clipwidth+1;
}
if(global_settings.rec_trigger_mode == TRIG_MODE_OFF)
pm_h[i] = font_get(vp_top[i].font)->height * 2;
else
pm_h[i] = font_get(vp_top[i].font)->height;
if(compact_view[i])
pm_h[i] /= 2;
trig_width[i] = vp_top[i].width - pm_x[i];
}
rec_init_recording_options(&rec_options);
rec_set_recording_options(&rec_options);
if(rec_create_directory() < 0)
{
rec_status = 0;
goto rec_abort;
}
#if CONFIG_RTC == 0
/* If format changed, a new number is required */
rec_init_filename();
#endif
#ifdef HAVE_AGC
#ifdef HAVE_MIC_REC
if (global_settings.rec_source == AUDIO_SRC_MIC) {
agc_preset = global_settings.rec_agc_preset_mic;
agc_maxgain = global_settings.rec_agc_maxgain_mic;
}
else
#endif /* MIC */
{
agc_preset = global_settings.rec_agc_preset_line;
agc_maxgain = global_settings.rec_agc_maxgain_line;
}
#endif /* HAVE_AGC */
set_gain();
update_countdown = 0; /* Update immediately */
/* populate translation table for list id -> enum */
#ifdef HAVE_SPDIF_REC
if(global_settings.rec_source == AUDIO_SRC_SPDIF)
{
listid_to_enum[0] = ITEM_VOLUME_D;
listid_to_enum[1] = ITEM_SAMPLERATE_D;
listid_to_enum[2] = ITEM_FILENAME_D;
gui_synclist_set_nb_items(&lists, ITEM_COUNT_D); /* spdif */
}
else
#endif
if(HAVE_MIC_REC_((global_settings.rec_source == AUDIO_SRC_MIC) || )
(global_settings.rec_channels == 1))
{
listid_to_enum[0] = ITEM_VOLUME_M;
listid_to_enum[1] = ITEM_GAIN_M;
#ifdef HAVE_AGC
listid_to_enum[2] = ITEM_AGC_MODE_M;
listid_to_enum[3] = ITEM_AGC_MAXDB_M;
listid_to_enum[4] = ITEM_FILENAME_M;
#else
listid_to_enum[2] = ITEM_FILENAME_M;
#endif
gui_synclist_set_nb_items(&lists, ITEM_COUNT_M); /* mono */
}
else
{
listid_to_enum[0] = ITEM_VOLUME;
listid_to_enum[1] = ITEM_GAIN;
listid_to_enum[2] = ITEM_GAIN_L;
listid_to_enum[3] = ITEM_GAIN_R;
#ifdef HAVE_AGC
listid_to_enum[4] = ITEM_AGC_MODE;
listid_to_enum[5] = ITEM_AGC_MAXDB;
listid_to_enum[6] = ITEM_FILENAME;
#else
listid_to_enum[4] = ITEM_FILENAME;
#endif
gui_synclist_set_nb_items(&lists, ITEM_COUNT); /* stereo */
}
gui_synclist_draw(&lists);
} /* if(done < 0) */
audio_stat = audio_status();
#if (CONFIG_LED == LED_REAL)
/*
* Flash the LED while waiting to record. Turn it on while
* recording.
*/
if(audio_stat & AUDIO_STATUS_RECORD)
{
if (audio_stat & AUDIO_STATUS_PAUSE)
{
if (--led_countdown <= 0)
{
led_state = !led_state;
led(led_state);
led_countdown = 2;
}
}
else
{
/* trigger is on in status TRIG_READY (no check needed) */
led(true);
}
}
else
{
int trig_stat = peak_meter_trigger_status();
/*
* other trigger stati than trig_off and trig_steady
* already imply that we are recording.
*/
if (trig_stat == TRIG_STEADY)
{
if (--led_countdown <= 0)
{
led_state = !led_state;
led(led_state);
led_countdown = 2;
}
}
else
{
/* trigger is on in status TRIG_READY (no check needed) */
led(false);
}
}
#endif /* CONFIG_LED */
/* Wait for a button a while (HZ/10) drawing the peak meter */
button = peak_meter_draw_get_btn(CONTEXT_RECSCREEN,
pm_x, pm_y, pm_h,
screen_update, vp_top);
if (last_audio_stat != audio_stat)
{
if (audio_stat & AUDIO_STATUS_RECORD)
{
rec_status |= RCSTAT_HAVE_RECORDED;
}
last_audio_stat = audio_stat;
update_list = true;
}
if (recording_start_automatic)
{
/* simulate a button press */
button = ACTION_REC_PAUSE;
recording_start_automatic = false;
}
/* let list handle the button */
gui_synclist_do_button(&lists, &button, LIST_WRAP_UNLESS_HELD);
switch(button)
{
case ACTION_SETTINGS_INC:
case ACTION_SETTINGS_INCREPEAT:
switch (listid_to_enum[gui_synclist_get_sel_pos(&lists)])
{
case ITEM_VOLUME:
recording_step_levels(SOUND_VOLUME, 1);
break;
case ITEM_GAIN:
#ifdef HAVE_MIC_REC
if(global_settings.rec_source == AUDIO_SRC_MIC)
recording_step_levels(SOUND_MIC_GAIN, 1);
else
#endif /* MIC */
{
recording_step_levels(SOUND_LEFT_GAIN, 1);
recording_step_levels(SOUND_RIGHT_GAIN, 1);
}
break;
case ITEM_GAIN_L:
recording_step_levels(SOUND_LEFT_GAIN, 1);
break;
case ITEM_GAIN_R:
recording_step_levels(SOUND_RIGHT_GAIN, 1);
break;
#ifdef HAVE_AGC
case ITEM_AGC_MODE:
agc_preset = MIN(agc_preset + 1, AGC_MODE_SIZE);
agc_enable = (agc_preset != 0);
#ifdef HAVE_MIC_REC
if (global_settings.rec_source == AUDIO_SRC_MIC) {
global_settings.rec_agc_preset_mic = agc_preset;
agc_maxgain = global_settings.rec_agc_maxgain_mic;
} else
#endif /* MIC */
{
global_settings.rec_agc_preset_line = agc_preset;
agc_maxgain = global_settings.rec_agc_maxgain_line;
}
break;
case ITEM_AGC_MAXDB:
#ifdef HAVE_MIC_REC
if (global_settings.rec_source == AUDIO_SRC_MIC)
{
agc_maxgain = MIN(agc_maxgain + 1,
sound_max(SOUND_MIC_GAIN));
global_settings.rec_agc_maxgain_mic = agc_maxgain;
}
else
#endif /* MIC */
{
agc_maxgain = MIN(agc_maxgain + 1,
sound_max(SOUND_LEFT_GAIN));
global_settings.rec_agc_maxgain_line = agc_maxgain;
}
break;
#endif /* HAVE_AGC */
}
set_gain();
update_countdown = 0; /* Update immediately */
break;
case ACTION_SETTINGS_DEC:
case ACTION_SETTINGS_DECREPEAT:
switch (listid_to_enum[gui_synclist_get_sel_pos(&lists)])
{
case ITEM_VOLUME:
recording_step_levels(SOUND_VOLUME, -1);
break;
case ITEM_GAIN:
#ifdef HAVE_MIC_REC
if(global_settings.rec_source == AUDIO_SRC_MIC)
recording_step_levels(SOUND_MIC_GAIN, -1);
else
#endif /* MIC */
{
recording_step_levels(SOUND_LEFT_GAIN, -1);
recording_step_levels(SOUND_RIGHT_GAIN, -1);
}
break;
case ITEM_GAIN_L:
recording_step_levels(SOUND_LEFT_GAIN, -1);
break;
case ITEM_GAIN_R:
recording_step_levels(SOUND_RIGHT_GAIN, -1);
break;
#ifdef HAVE_AGC
case ITEM_AGC_MODE:
agc_preset = MAX(agc_preset - 1, 0);
agc_enable = (agc_preset != 0);
#ifdef HAVE_MIC_REC
if (global_settings.rec_source == AUDIO_SRC_MIC) {
global_settings.rec_agc_preset_mic = agc_preset;
agc_maxgain = global_settings.rec_agc_maxgain_mic;
} else
#endif /* MIC */
{
global_settings.rec_agc_preset_line = agc_preset;
agc_maxgain = global_settings.rec_agc_maxgain_line;
}
break;
case ITEM_AGC_MAXDB:
#ifdef HAVE_MIC_REC
if (global_settings.rec_source == AUDIO_SRC_MIC)
{
agc_maxgain = MAX(agc_maxgain - 1,
sound_min(SOUND_MIC_GAIN));
global_settings.rec_agc_maxgain_mic = agc_maxgain;
} else
#endif /* MIC */
{
agc_maxgain = MAX(agc_maxgain - 1,
sound_min(SOUND_LEFT_GAIN));
global_settings.rec_agc_maxgain_line = agc_maxgain;
}
break;
#endif /* HAVE_AGC */
}
set_gain();
update_countdown = 0; /* Update immediately */
break;
case ACTION_STD_CANCEL:
/* turn off the trigger */
peak_meter_trigger(false);
peak_meter_set_trigger_listener(NULL);
if(audio_stat & AUDIO_STATUS_RECORD)
{
rec_command(RECORDING_CMD_STOP);
}
else
{
done = 1;
}
update_countdown = 0; /* Update immediately */
break;
#ifdef HAVE_REMOTE_LCD
case ACTION_REC_LCD:
/* this feature exists for some h1x0/h3x0 targets that suffer
from noise caused by remote LCD updates
NOTE 1: this will leave the list on the remote
NOTE 2: to be replaced by a global LCD_off() routine */
if(remote_display_on)
{
/* switch to single screen, leave message on remote */
screen_update = 1;
screens[1].clear_viewport();
screens[1].puts(0, 0, str(LANG_REMOTE_LCD_OFF));
screens[1].puts(0, 1, str(LANG_REMOTE_LCD_ON));
screens[1].update_viewport();
}
else
{
/* remote switched on again */
update_list = true;
screen_update = NB_SCREENS;
}
remote_display_on = !remote_display_on; /* toggle */
update_countdown = 0; /* Update immediately */
break;
#endif
case ACTION_REC_PAUSE:
case ACTION_REC_NEWFILE:
/* Only act if the mpeg is stopped */
if(!(audio_stat & AUDIO_STATUS_RECORD))
{
/* is this manual or triggered recording? */
if ((global_settings.rec_trigger_mode == TRIG_MODE_OFF) ||
(peak_meter_trigger_status() != TRIG_OFF))
{
/* manual recording */
rec_status |= RCSTAT_HAVE_RECORDED;
rec_command(RECORDING_CMD_START);
last_seconds = 0;
if (global_settings.talk_menu)
{
/* no voice possible here, but a beep */
audio_beep(HZ/2); /* longer beep on start */
}
}
/* this is triggered recording */
else
{
/* we don't start recording now, but enable the
trigger and let the callback function
trigger_listener control when the recording starts */
peak_meter_trigger(true);
peak_meter_set_trigger_listener(&trigger_listener);
}
}
else
{
/*if new file button pressed, start new file */
if (button == ACTION_REC_NEWFILE)
{
rec_command(RECORDING_CMD_START_NEWFILE);
last_seconds = 0;
}
else
/* if pause button pressed, pause or resume */
{
if(audio_stat & AUDIO_STATUS_PAUSE)
{
rec_command(RECORDING_CMD_RESUME);
if (global_settings.talk_menu)
{
/* no voice possible here, but a beep */
audio_beep(HZ/4); /* short beep on resume */
}
}
else
{
rec_command(RECORDING_CMD_PAUSE);
}
}
}
update_countdown = 0; /* Update immediately */
break;
case ACTION_STD_MENU:
if(!(audio_stat & AUDIO_STATUS_RECORD))
{
#if (CONFIG_LED == LED_REAL)
/* led is restored at begin of loop / end of function */
led(false);
#endif
if (recording_menu(no_source))
{
done = 1;
rec_status |= RCSTAT_BEEN_IN_USB_MODE;
#ifdef HAVE_FMRADIO_REC
radio_status = FMRADIO_OFF;
#endif
}
else
{
done = -1;
/* the init is now done at the beginning of the loop */
}
}
break;
case SYS_POWEROFF:
default_event_handler(SYS_POWEROFF);
done = true;
break;
case SYS_USB_CONNECTED:
/* Only accept USB connection when not recording */
if(!(audio_stat & AUDIO_STATUS_RECORD))
{
FOR_NB_SCREENS(i)
screens[i].set_viewport(NULL);
default_event_handler(SYS_USB_CONNECTED);
done = true;
rec_status |= RCSTAT_BEEN_IN_USB_MODE;
#ifdef HAVE_FMRADIO_REC
radio_status = FMRADIO_OFF;
#endif
}
break;
} /*switch(button)*/
#ifdef HAVE_AGC
peak_read = !peak_read;
if (peak_read) { /* every 2nd run of loop */
peak_time++;
peak_valid = read_peak_levels(&peak_l, &peak_r, &balance);
}
/* Handle AGC every 200ms when enabled and peak data is valid */
if (peak_read && agc_enable && peak_valid)
auto_gain_control(&peak_l, &peak_r, &balance);
#endif
seconds = audio_recorded_time() / HZ;
/* start of vp_top drawing */
if(update_countdown-- == 0 || seconds > last_seconds)
{
unsigned int dseconds, dhours, dminutes;
unsigned long num_recorded_bytes, dsize, dmb;
FOR_NB_SCREENS(i)
{
screens[i].set_viewport(&vp_top[i]);
screens[i].clear_viewport();
}
update_countdown = 5;
last_seconds = seconds;
dseconds = split_seconds;
dsize = split_bytes;
num_recorded_bytes = audio_num_recorded_bytes();
if ((audio_stat & AUDIO_STATUS_WARNING)
&& (warning_counter++ % WARNING_PERIOD) < WARNING_PERIOD/2)
{
/* Switch back and forth displaying warning on first available
line to ensure visibility - the motion should also help
draw attention */
/* Don't use language string unless agreed upon to make this
method permanent - could do something in the statusbar */
snprintf(buf, sizeof(buf), "Warning: %08lX",
Update software recording engine to latest codec interface. Basically, just give it a good rewrite. Software codec recording can be implemented in a more straightforward and simple manner and made more robust through the better codec control now available. Encoded audio buffer uses a packed format instead of fixed-size chunks and uses smaller data headers leading to more efficient usage. The greatest benefit is with a VBR format like wavpack which needs to request a maximum size but only actually ends up committing part of that request. No guard buffers are used for either PCM or encoded audio. PCM is read into the codec's provided buffer and mono conversion done at that time in the core if required. Any highly-specialized sample conversion is still done within the codec itself, such as 32-bit (wavpack) or interleaved mono (mp3). There is no longer a separate filename array. All metadata goes onto the main encoded audio buffer, eliminating any predermined file limit on the buffer as well as not wasting the space for unused path queue slots. The core and codec interface is less awkward and a bit more sensible. Some less useful interface features were removed. Threads are kept on narrow code paths ie. the audio thread never calls encoding functions and the codec thread never calls file functions as before. Codecs no longer call file functions directly. Writes are buffered in the core and data written to storage in larger chunks to speed up flushing of data. In fact, codecs are no longer aware of the stream being a file at all and have no access to the fd. SPDIF frequency detection no longer requires a restart of recording or plugging the source before entering the screen. It will poll for changes and update when stopped or prerecording (which does discard now-invalid prerecorded data). I've seen to it that writing a proper header on full disk works when the format makes it reasonably practical to do so. Other cases may have incorrect data sizes but sample info will be in tact. File left that way may play anyway. mp3_enc.codec acquires the ability to write 'Info' headers with LAME tags to make it gapless (bonus). Change-Id: I670685166d5eb32ef58ef317f50b8af766ceb653 Reviewed-on: http://gerrit.rockbox.org/493 Reviewed-by: Michael Sevakis <jethead71@rockbox.org> Tested-by: Michael Sevakis <jethead71@rockbox.org>
2013-06-22 20:41:16 +00:00
(unsigned long)pcm_rec_get_warnings());
}
else
if ((global_settings.rec_sizesplit) &&
(global_settings.rec_split_method))
{
dmb = dsize >> 20;
snprintf(buf, sizeof(buf), "%s %luMB",
str(LANG_SPLIT_SIZE), dmb);
}
else
{
hours = seconds / 3600;
minutes = (seconds - (hours * 3600)) / 60;
snprintf(buf, sizeof(buf), "%s %02d:%02d:%02d",
str(LANG_RECORDING_TIME),
hours, minutes, seconds%60);
}
FOR_NB_ACTIVE_SCREENS(i)
screens[i].puts(0, 0, buf);
if(audio_stat & AUDIO_STATUS_PRERECORD)
{
Update software recording engine to latest codec interface. Basically, just give it a good rewrite. Software codec recording can be implemented in a more straightforward and simple manner and made more robust through the better codec control now available. Encoded audio buffer uses a packed format instead of fixed-size chunks and uses smaller data headers leading to more efficient usage. The greatest benefit is with a VBR format like wavpack which needs to request a maximum size but only actually ends up committing part of that request. No guard buffers are used for either PCM or encoded audio. PCM is read into the codec's provided buffer and mono conversion done at that time in the core if required. Any highly-specialized sample conversion is still done within the codec itself, such as 32-bit (wavpack) or interleaved mono (mp3). There is no longer a separate filename array. All metadata goes onto the main encoded audio buffer, eliminating any predermined file limit on the buffer as well as not wasting the space for unused path queue slots. The core and codec interface is less awkward and a bit more sensible. Some less useful interface features were removed. Threads are kept on narrow code paths ie. the audio thread never calls encoding functions and the codec thread never calls file functions as before. Codecs no longer call file functions directly. Writes are buffered in the core and data written to storage in larger chunks to speed up flushing of data. In fact, codecs are no longer aware of the stream being a file at all and have no access to the fd. SPDIF frequency detection no longer requires a restart of recording or plugging the source before entering the screen. It will poll for changes and update when stopped or prerecording (which does discard now-invalid prerecorded data). I've seen to it that writing a proper header on full disk works when the format makes it reasonably practical to do so. Other cases may have incorrect data sizes but sample info will be in tact. File left that way may play anyway. mp3_enc.codec acquires the ability to write 'Info' headers with LAME tags to make it gapless (bonus). Change-Id: I670685166d5eb32ef58ef317f50b8af766ceb653 Reviewed-on: http://gerrit.rockbox.org/493 Reviewed-by: Michael Sevakis <jethead71@rockbox.org> Tested-by: Michael Sevakis <jethead71@rockbox.org>
2013-06-22 20:41:16 +00:00
/* Tracks amount of prerecorded data in buffer */
snprintf(buf, sizeof(buf), "%s (%lu/%ds)...",
str(LANG_RECORD_PRERECORD),
audio_prerecorded_time() / HZ,
global_settings.rec_prerecord_time);
}
else
{
/* Display the split interval if the record timesplit
is active */
if ((global_settings.rec_timesplit) &&
!(global_settings.rec_split_method))
{
/* Display the record timesplit interval rather
than the file size if the record timer is active */
dhours = dseconds / 3600;
dminutes = (dseconds - (dhours * 3600)) / 60;
snprintf(buf, sizeof(buf), "%s %02d:%02d",
str(LANG_RECORDING_TIMESPLIT_REC),
dhours, dminutes);
}
else
{
output_dyn_value(buf2, sizeof buf2,
num_recorded_bytes,
byte_units, 4, true);
snprintf(buf, sizeof(buf), "%s %s",
str(LANG_RECORDING_SIZE), buf2);
}
}
FOR_NB_ACTIVE_SCREENS(i)
screens[i].puts(0, 1, buf);
/* We will do file splitting regardless, either at the end of
a split interval, or when the filesize approaches the 2GB
FAT file size (compatibility) limit. */
if ((audio_stat && !(global_settings.rec_split_method)
&& global_settings.rec_timesplit && (seconds >= dseconds))
|| (audio_stat && global_settings.rec_split_method
&& global_settings.rec_sizesplit
&& (num_recorded_bytes >= dsize))
|| (num_recorded_bytes >= MAX_FILE_SIZE))
{
if (!(global_settings.rec_split_type)
|| (num_recorded_bytes >= MAX_FILE_SIZE))
{
rec_command(RECORDING_CMD_START_NEWFILE);
last_seconds = 0;
}
else
{
peak_meter_trigger(false);
peak_meter_set_trigger_listener(NULL);
if( global_settings.rec_split_type == 1)
rec_command(RECORDING_CMD_STOP);
else
rec_command(RECORDING_CMD_STOP_SHUTDOWN);
}
update_countdown = 0;
}
/* draw the clipcounter just in front of the peakmeter */
if(global_settings.peak_meter_clipcounter)
{
int clipcount = pm_get_clipcount();
FOR_NB_ACTIVE_SCREENS(i)
{
if(!compact_view[i])
{
screens[i].puts(0, 2, str(LANG_PM_CLIPCOUNT));
screens[i].putsf(0, 3, "%4d", clipcount);
}
else
screens[i].putsf(0, 2, "%4d", clipcount);
}
}
#ifdef HAVE_HISTOGRAM
if(global_settings.histogram_interval)
{
histogram_draw(0,
screens[0].getwidth()/2,
hist_pos_y,
hist_pos_y,
screens[0].getwidth()/2,
hist_size_h);
}
#endif
#ifdef HAVE_AGC
hist_time++;
#endif
/* draw the trigger status */
if (peak_meter_trigger_status() != TRIG_OFF)
{
peak_meter_draw_trig(pm_x, trig_ypos, trig_width,
screen_update);
FOR_NB_ACTIVE_SCREENS(i)
screens[i].update_viewport_rect(pm_x[i], trig_ypos[i],
trig_width[i] + 2, TRIG_HEIGHT);
}
#ifdef HAVE_AGC
#ifdef HAVE_MIC_REC
if (global_settings.rec_source == AUDIO_SRC_MIC)
{
if(agc_maxgain < (global_settings.rec_mic_gain))
change_recording_gain(false, true, true);
}
else
#endif /* MIC */
{
if(agc_maxgain < (global_settings.rec_left_gain))
change_recording_gain(false, true, false);
if(agc_maxgain < (global_settings.rec_right_gain))
change_recording_gain(false, false, true);
}
#endif /* HAVE_AGC */
#ifdef HAVE_SPDIF_REC
if((global_settings.rec_source == AUDIO_SRC_SPDIF) &&
(prev_sample_rate != pcm_rec_sample_rate()))
{
/* spdif samplerate changed */
prev_sample_rate = pcm_rec_sample_rate();
update_list = true;
}
#endif
if(update_list)
{
/* update_list is set whenever content changes */
update_list = false;
gui_synclist_draw(&lists);
}
/* draw peakmeter again (check if this can be removed) */
FOR_NB_ACTIVE_SCREENS(i)
{
screens[i].set_viewport(&vp_top[i]);
peak_meter_screen(&screens[i], pm_x[i], pm_y[i], pm_h[i]);
screens[i].update();
}
} /* display update every second */
if(audio_stat & AUDIO_STATUS_ERROR)
{
done = true;
}
} /* end while(!done) */
audio_stat = audio_status();
if (audio_stat & AUDIO_STATUS_ERROR)
{
splash(0, str(LANG_DISK_FULL));
FOR_NB_SCREENS(i)
screens[i].update();
Update software recording engine to latest codec interface. Basically, just give it a good rewrite. Software codec recording can be implemented in a more straightforward and simple manner and made more robust through the better codec control now available. Encoded audio buffer uses a packed format instead of fixed-size chunks and uses smaller data headers leading to more efficient usage. The greatest benefit is with a VBR format like wavpack which needs to request a maximum size but only actually ends up committing part of that request. No guard buffers are used for either PCM or encoded audio. PCM is read into the codec's provided buffer and mono conversion done at that time in the core if required. Any highly-specialized sample conversion is still done within the codec itself, such as 32-bit (wavpack) or interleaved mono (mp3). There is no longer a separate filename array. All metadata goes onto the main encoded audio buffer, eliminating any predermined file limit on the buffer as well as not wasting the space for unused path queue slots. The core and codec interface is less awkward and a bit more sensible. Some less useful interface features were removed. Threads are kept on narrow code paths ie. the audio thread never calls encoding functions and the codec thread never calls file functions as before. Codecs no longer call file functions directly. Writes are buffered in the core and data written to storage in larger chunks to speed up flushing of data. In fact, codecs are no longer aware of the stream being a file at all and have no access to the fd. SPDIF frequency detection no longer requires a restart of recording or plugging the source before entering the screen. It will poll for changes and update when stopped or prerecording (which does discard now-invalid prerecorded data). I've seen to it that writing a proper header on full disk works when the format makes it reasonably practical to do so. Other cases may have incorrect data sizes but sample info will be in tact. File left that way may play anyway. mp3_enc.codec acquires the ability to write 'Info' headers with LAME tags to make it gapless (bonus). Change-Id: I670685166d5eb32ef58ef317f50b8af766ceb653 Reviewed-on: http://gerrit.rockbox.org/493 Reviewed-by: Michael Sevakis <jethead71@rockbox.org> Tested-by: Michael Sevakis <jethead71@rockbox.org>
2013-06-22 20:41:16 +00:00
/* stop recording first and try to finish saving whatever it can */
rec_command(RECORDING_CMD_STOP);
audio_close_recording();
audio_error_clear();
while(1)
{
if (action_userabort(TIMEOUT_NOBLOCK))
break;
}
}
rec_abort:
rec_command(RECORDING_CMD_STOP);
audio_close_recording();
#ifdef HAVE_FMRADIO_REC
if (radio_status != FMRADIO_OFF)
/* Restore radio playback - radio_status should be unchanged if started
through fm radio screen (barring usb connect) */
rec_set_source(AUDIO_SRC_FMRADIO, (radio_status & FMRADIO_PAUSED) ?
SRCF_FMRADIO_PAUSED : SRCF_FMRADIO_PLAYING);
else
#endif
/* Go back to playback mode */
rec_set_source(AUDIO_SRC_PLAYBACK, SRCF_PLAYBACK);
/* restore talking */
talk_disable(false);
/* restore keyclick */
global_settings.keyclick = keyclick;
#ifdef HAVE_SPEAKER
/* Re-enable speaker */
audio_enable_speaker(global_settings.speaker_mode);
#endif
/* make sure the trigger is really turned off */
peak_meter_trigger(false);
peak_meter_set_trigger_listener(NULL);
rec_status &= ~RCSTAT_IN_RECSCREEN;
sound_settings_apply();
FOR_NB_SCREENS(i)
screens[i].setfont(FONT_UI);
/* if the directory was created or recording happened, make sure the
browser is updated */
if (rec_status & (RCSTAT_CREATED_DIRECTORY | RCSTAT_HAVE_RECORDED))
reload_directory();
#if (CONFIG_STORAGE & STORAGE_ATA) && (CONFIG_LED == LED_REAL) \
&& !defined(SIMULATOR)
ata_set_led_enabled(true);
#endif
settings_save();
pop_current_activity();
return (rec_status & RCSTAT_BEEN_IN_USB_MODE) != 0;
} /* recording_screen */
void audio_beep(int duration)
{
/* dummy */
(void)duration;
}
#endif /* HAVE_RECORDING */