Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18836 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Dave Chapman
parent
14ee31865e
commit
08c41d42bb
|
|
@ -39,7 +39,7 @@ meizu_m3.c
|
|||
ondavx747.c
|
||||
#elif defined(CREATIVE_ZVx)
|
||||
creativezvm.c
|
||||
#elif defined(HAVE_AS3525)
|
||||
#elif CONFIG_CPU==AS3525
|
||||
sansa_as3525.c
|
||||
show_logo.c
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id:$
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2008 by Rafaël Carré
|
||||
*
|
||||
|
|
@ -37,7 +37,9 @@ void main(void)
|
|||
|
||||
lcd_update();
|
||||
|
||||
#ifdef HAVE_LCD_ENABLE
|
||||
lcd_enable(true);
|
||||
#endif
|
||||
|
||||
show_logo();
|
||||
|
||||
|
|
|
|||
|
|
@ -327,10 +327,6 @@ target/arm/pnx0101/system-pnx0101.c
|
|||
|
||||
#if CONFIG_CPU == AS3525
|
||||
target/arm/as3525/system-as3525.c
|
||||
#ifdef SANSA_CLIP
|
||||
target/arm/as3525/sansa-clip/lcd-ssd1303.c
|
||||
target/arm/as3525/sansa-clip/button-clip.c
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if defined(CPU_PP)
|
||||
|
|
@ -978,9 +974,9 @@ target/arm/pnx0101/pcm-pnx0101.c
|
|||
#ifndef SIMULATOR
|
||||
drivers/nand_id.c
|
||||
target/arm/ata-nand-telechips.c
|
||||
target/arm/lcd-ssd1815.c
|
||||
target/arm/tcc77x/adc-tcc77x.c
|
||||
target/arm/tcc77x/kernel-tcc77x.c
|
||||
target/arm/tcc77x/lcd-ssd1815.c
|
||||
target/arm/tcc77x/powermgmt-tcc77x.c
|
||||
target/arm/tcc77x/system-tcc77x.c
|
||||
target/arm/tcc77x/timer-tcc77x.c
|
||||
|
|
@ -999,10 +995,10 @@ target/arm/tcc77x/logikdax/audio-logikdax.c
|
|||
#ifdef SANSA_M200
|
||||
#ifndef SIMULATOR
|
||||
drivers/nand_id.c
|
||||
target/arm/lcd-ssd1815.c
|
||||
target/arm/ata-nand-telechips.c
|
||||
target/arm/tcc77x/adc-tcc77x.c
|
||||
target/arm/tcc77x/kernel-tcc77x.c
|
||||
target/arm/tcc77x/lcd-ssd1815.c
|
||||
target/arm/tcc77x/powermgmt-tcc77x.c
|
||||
target/arm/tcc77x/system-tcc77x.c
|
||||
target/arm/tcc77x/timer-tcc77x.c
|
||||
|
|
@ -1038,6 +1034,27 @@ target/arm/pcm-telechips.c
|
|||
#endif /* SIMULATOR */
|
||||
#endif /* SANSA_C100 */
|
||||
|
||||
#ifdef SANSA_CLIP
|
||||
#ifndef SIMULATOR
|
||||
target/arm/as3525/sansa-clip/lcd-ssd1303.c
|
||||
target/arm/as3525/sansa-clip/button-clip.c
|
||||
#endif /* !SIMULATOR */
|
||||
#endif /* SANSA_CLIP */
|
||||
|
||||
#ifdef SANSA_E200V2
|
||||
#ifndef SIMULATOR
|
||||
target/arm/as3525/sansa-e200v2/lcd-e200v2.c
|
||||
target/arm/as3525/sansa-e200v2/button-e200v2.c
|
||||
#endif /* !SIMULATOR */
|
||||
#endif /* SANSA_E200V2 */
|
||||
|
||||
#ifdef SANSA_M200V2
|
||||
#ifndef SIMULATOR
|
||||
target/arm/lcd-ssd1815.c
|
||||
target/arm/as3525/sansa-m200v2/button-m200v2.c
|
||||
#endif /* !SIMULATOR */
|
||||
#endif /* SANSA_M200V2 */
|
||||
|
||||
#ifdef IAUDIO_7
|
||||
#ifndef SIMULATOR
|
||||
drivers/nand_id.c
|
||||
|
|
|
|||
|
|
@ -4,7 +4,7 @@
|
|||
#define TARGET_TREE /* this target is using the target tree system */
|
||||
|
||||
/* For Rolo and boot loader */
|
||||
#define MODEL_NUMBER 50
|
||||
#define MODEL_NUMBER 40
|
||||
#define MODEL_NAME "Sandisk Sansa Clip"
|
||||
#define FIRMWARE_OFFSET_FILE_DATA 0
|
||||
#define FIRMWARE_OFFSET_FILE_CRC 0
|
||||
|
|
@ -69,11 +69,9 @@
|
|||
/* There is no hardware tone control */
|
||||
#define HAVE_SW_TONE_CONTROLS
|
||||
|
||||
#define HAVE_AS3525
|
||||
|
||||
/* define this if you have a real-time clock */
|
||||
#ifndef BOOTLOADER
|
||||
//#define CONFIG_RTC RTC_AS3525
|
||||
#define CONFIG_RTC RTC_AS3525
|
||||
#endif
|
||||
|
||||
/* Define this if you have a software controlled poweroff */
|
||||
|
|
@ -148,7 +146,7 @@
|
|||
/* enable these for the experimental usb stack */
|
||||
#define HAVE_USBSTACK
|
||||
#define USB_VENDOR_ID 0x0781
|
||||
#define USB_PRODUCT_ID 0x7421
|
||||
#define USB_PRODUCT_ID 0x7433
|
||||
#endif /* BOOTLOADER */
|
||||
|
||||
/* Virtual LED (icon) */
|
||||
|
|
@ -157,6 +155,11 @@
|
|||
/* Define this if you have adjustable CPU frequency */
|
||||
#define HAVE_ADJUSTABLE_CPU_FREQ
|
||||
|
||||
#define MI4_FORMAT
|
||||
#define BOOTFILE_EXT "sansa"
|
||||
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
||||
#define BOOTDIR "/.rockbox"
|
||||
|
||||
#define ICODE_ATTR_TREMOR_NOT_MDCT
|
||||
|
||||
#define INCLUDE_TIMEOUT_API
|
||||
|
|
|
|||
202
firmware/export/config-e200v2.h
Normal file
202
firmware/export/config-e200v2.h
Normal file
|
|
@ -0,0 +1,202 @@
|
|||
/*
|
||||
* This config file is for the Sandisk Sansa e200v2
|
||||
*/
|
||||
#define TARGET_TREE /* this target is using the target tree system */
|
||||
|
||||
/* For Rolo and boot loader */
|
||||
#define MODEL_NUMBER 41
|
||||
#define MODEL_NAME "Sandisk Sansa e200v2 series"
|
||||
|
||||
#define HW_SAMPR_CAPS (SAMPR_CAP_44)
|
||||
|
||||
/* define this if you have recording possibility */
|
||||
#define HAVE_RECORDING
|
||||
|
||||
#define REC_SAMPR_CAPS (SAMPR_CAP_22)
|
||||
#define REC_FREQ_DEFAULT REC_FREQ_22 /* Default is not 44.1kHz */
|
||||
#define REC_SAMPR_DEFAULT SAMPR_22
|
||||
|
||||
/* Define bitmask of input sources - recordable bitmask can be defined
|
||||
explicitly if different */
|
||||
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
|
||||
|
||||
/* define this if you have a bitmap LCD display */
|
||||
#define HAVE_LCD_BITMAP
|
||||
|
||||
/* define this if you have a colour LCD */
|
||||
#define HAVE_LCD_COLOR
|
||||
|
||||
/* define this if you want album art for this target */
|
||||
#define HAVE_ALBUMART
|
||||
|
||||
/* define this if you have a light associated with the buttons */
|
||||
#define HAVE_BUTTON_LIGHT
|
||||
|
||||
/* define this if you have access to the quickscreen */
|
||||
#define HAVE_QUICKSCREEN
|
||||
|
||||
/* define this if you have access to the pitchscreen */
|
||||
#define HAVE_PITCHSCREEN
|
||||
|
||||
/* define this if you would like tagcache to build on this target */
|
||||
#define HAVE_TAGCACHE
|
||||
|
||||
/* LCD dimensions */
|
||||
#define LCD_WIDTH 176
|
||||
#define LCD_HEIGHT 220
|
||||
#define LCD_DEPTH 16 /* 65536 colours */
|
||||
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
|
||||
|
||||
/* define this if you have LCD enable function */
|
||||
#define HAVE_LCD_ENABLE
|
||||
|
||||
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
|
||||
should be defined as well. */
|
||||
#define HAVE_LCD_SLEEP
|
||||
#define HAVE_LCD_SLEEP_SETTING
|
||||
|
||||
/* define this if you can flip your LCD */
|
||||
#define HAVE_LCD_FLIP
|
||||
|
||||
/* define this if you can invert the colours on your LCD */
|
||||
#define HAVE_LCD_INVERT
|
||||
|
||||
/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
|
||||
|
||||
#define CONFIG_KEYPAD SANSA_E200_PAD
|
||||
|
||||
/* Define this if you do software codec */
|
||||
#define CONFIG_CODEC SWCODEC
|
||||
/* There is no hardware tone control */
|
||||
#define HAVE_SW_TONE_CONTROLS
|
||||
|
||||
/* Define this if you have an AMS AS3525 */
|
||||
#define HAVE_AS3525
|
||||
|
||||
/* define this if you have a real-time clock */
|
||||
#ifndef BOOTLOADER
|
||||
#define CONFIG_RTC RTC_AS3525
|
||||
#endif
|
||||
|
||||
/* Define this if you have a software controlled poweroff */
|
||||
#define HAVE_SW_POWEROFF
|
||||
|
||||
/* Some Sansa E200s seem to be FAT16 formatted */
|
||||
#define HAVE_FAT16SUPPORT
|
||||
|
||||
/* The number of bytes reserved for loadable codecs */
|
||||
#define CODEC_SIZE 0x100000
|
||||
|
||||
/* The number of bytes reserved for loadable plugins */
|
||||
#define PLUGIN_BUFFER_SIZE 0x80000
|
||||
|
||||
#define AB_REPEAT_ENABLE 1
|
||||
|
||||
/* FM Tuner */
|
||||
/* #define CONFIG_TUNER LV24020LP */
|
||||
/* #define HAVE_TUNER_PWR_CTRL */
|
||||
|
||||
/* Define this for LCD backlight available */
|
||||
#define HAVE_BACKLIGHT
|
||||
#define HAVE_BACKLIGHT_BRIGHTNESS
|
||||
|
||||
/* define this if the unit uses a scrollwheel for navigation */
|
||||
#define HAVE_SCROLLWHEEL
|
||||
/* define from which rotation speed [degree/sec] on the acceleration starts */
|
||||
#define WHEEL_ACCEL_START 540
|
||||
/* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
|
||||
#define WHEEL_ACCELERATION 1
|
||||
|
||||
/* define this if you have a flash memory storage */
|
||||
#define HAVE_FLASH_STORAGE
|
||||
|
||||
/* define this if the flash memory uses the SecureDigital Memory Card protocol */
|
||||
#define HAVE_ATA_SD
|
||||
|
||||
#define BATTERY_CAPACITY_DEFAULT 750 /* default battery capacity */
|
||||
#define BATTERY_CAPACITY_MIN 750 /* min. capacity selectable */
|
||||
#define BATTERY_CAPACITY_MAX 750 /* max. capacity selectable */
|
||||
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
|
||||
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
||||
|
||||
/* Hardware controlled charging? FIXME */
|
||||
#define CONFIG_CHARGING CHARGING_SIMPLE
|
||||
|
||||
/* define this if the unit can be powered or charged via USB */
|
||||
#define HAVE_USB_POWER
|
||||
|
||||
/** Non-simulator section **/
|
||||
#ifndef SIMULATOR
|
||||
|
||||
/* Define this if you have an AMS AS3525*/
|
||||
#define CONFIG_CPU AS3525
|
||||
|
||||
/* Define this if you want to use the AS2525 i2c interface */
|
||||
#define CONFIG_I2C I2C_AS3525
|
||||
|
||||
/* define this if the hardware can be powered off while charging */
|
||||
/* Sansa can't be powered off while charging */
|
||||
/* #define HAVE_POWEROFF_WHILE_CHARGING */
|
||||
|
||||
/* The start address index for ROM builds */
|
||||
#define ROM_START 0x00000000
|
||||
|
||||
/* Define this to the CPU frequency */
|
||||
#define CPU_FREQ 75000000
|
||||
|
||||
/* Type of LCD TODO: hopefully the same as the x5 but check this*/
|
||||
#define CONFIG_LCD LCD_X5
|
||||
|
||||
/* Offset ( in the firmware file's header ) to the file CRC and data. These are
|
||||
only used when loading the old format rockbox.e200 file */
|
||||
#define FIRMWARE_OFFSET_FILE_CRC 0x0
|
||||
#define FIRMWARE_OFFSET_FILE_DATA 0x8
|
||||
|
||||
#ifndef BOOTLOADER
|
||||
#define HAVE_MULTIVOLUME
|
||||
#define HAVE_HOTSWAP
|
||||
#endif
|
||||
|
||||
/* #define USB_IPODSTYLE */
|
||||
|
||||
/* USB On-the-go */
|
||||
#define CONFIG_USBOTG USBOTG_AS3525
|
||||
|
||||
/* enable these for the experimental usb stack */
|
||||
#define HAVE_USBSTACK
|
||||
#define USB_VENDOR_ID 0x0781
|
||||
#define USB_PRODUCT_ID 0x7423
|
||||
|
||||
/* Virtual LED (icon) */
|
||||
#define CONFIG_LED LED_VIRTUAL
|
||||
|
||||
/* Define this if you have adjustable CPU frequency */
|
||||
#define HAVE_ADJUSTABLE_CPU_FREQ
|
||||
|
||||
#define MI4_FORMAT
|
||||
#define BOOTFILE_EXT "sansa"
|
||||
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
||||
#define BOOTDIR "/.rockbox"
|
||||
|
||||
#define ICODE_ATTR_TREMOR_NOT_MDCT
|
||||
|
||||
#define INCLUDE_TIMEOUT_API
|
||||
|
||||
#endif /* SIMULATOR */
|
||||
|
||||
/** Port-specific settings **/
|
||||
|
||||
/* Main LCD backlight brightness range and defaults */
|
||||
#define MIN_BRIGHTNESS_SETTING 1
|
||||
#define MAX_BRIGHTNESS_SETTING 12
|
||||
#define DEFAULT_BRIGHTNESS_SETTING 6
|
||||
|
||||
/* Default recording levels */
|
||||
#define DEFAULT_REC_MIC_GAIN 23
|
||||
#define DEFAULT_REC_LEFT_GAIN 23
|
||||
#define DEFAULT_REC_RIGHT_GAIN 23
|
||||
|
||||
#ifdef E200R_INSTALLER
|
||||
#define IRAMORIG 0x40004000
|
||||
#endif
|
||||
|
||||
127
firmware/export/config-m200v2.h
Normal file
127
firmware/export/config-m200v2.h
Normal file
|
|
@ -0,0 +1,127 @@
|
|||
/*
|
||||
* This config file is for the Sansa M200 series
|
||||
*/
|
||||
#define TARGET_TREE /* this target is using the target tree system */
|
||||
|
||||
/* For Rolo and boot loader */
|
||||
#define MODEL_NUMBER 42
|
||||
|
||||
#define MODEL_NAME "Sandisk Sansa m200 series"
|
||||
|
||||
/* Enable FAT16 support */
|
||||
#define HAVE_FAT16SUPPORT
|
||||
|
||||
/* define this if you have recording possibility */
|
||||
//#define HAVE_RECORDING
|
||||
|
||||
/* Define bitmask of input sources - recordable bitmask can be defined
|
||||
explicitly if different */
|
||||
//#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_SPDIF)
|
||||
|
||||
/* define this if you have a bitmap LCD display */
|
||||
#define HAVE_LCD_BITMAP
|
||||
|
||||
/* define this if you can flip your LCD */
|
||||
#define HAVE_LCD_FLIP
|
||||
|
||||
/* define this if you can invert the colours on your LCD */
|
||||
#define HAVE_LCD_INVERT
|
||||
|
||||
/* define this if you have access to the quickscreen */
|
||||
#define HAVE_QUICKSCREEN
|
||||
/* define this if you have access to the pitchscreen */
|
||||
#define HAVE_PITCHSCREEN
|
||||
|
||||
/* define this if you would like tagcache to build on this target */
|
||||
#define HAVE_TAGCACHE
|
||||
|
||||
/* define this if you have a flash memory storage */
|
||||
#define HAVE_FLASH_STORAGE
|
||||
|
||||
/* LCD dimensions */
|
||||
#define LCD_WIDTH 128
|
||||
#define LCD_HEIGHT 64
|
||||
#define LCD_DEPTH 1
|
||||
|
||||
#define LCD_PIXELFORMAT VERTICAL_PACKING
|
||||
|
||||
/* define this to indicate your device's keypad */
|
||||
#define CONFIG_KEYPAD SANSA_M200_PAD
|
||||
|
||||
/* define this if you have a real-time clock */
|
||||
#define CONFIG_RTC RTC_AS3525
|
||||
|
||||
/* define this if you have RTC RAM available for settings */
|
||||
//#define HAVE_RTC_RAM
|
||||
|
||||
/* Define this if you have a software controlled poweroff */
|
||||
#define HAVE_SW_POWEROFF
|
||||
|
||||
/* The number of bytes reserved for loadable codecs */
|
||||
#define CODEC_SIZE 0x38000
|
||||
|
||||
/* The number of bytes reserved for loadable plugins */
|
||||
#define PLUGIN_BUFFER_SIZE 0x10000
|
||||
|
||||
#define AB_REPEAT_ENABLE 1
|
||||
|
||||
/* Define this if you do software codec */
|
||||
#define CONFIG_CODEC SWCODEC
|
||||
|
||||
/* Define this if you have the TLV320 audio codec */
|
||||
/*#define HAVE_TLV320*/
|
||||
|
||||
/* TLV320 has no tone controls, so we use the software ones */
|
||||
#define HAVE_SW_TONE_CONTROLS
|
||||
|
||||
/* Define this for LCD backlight available */
|
||||
#define HAVE_BACKLIGHT
|
||||
|
||||
#define CONFIG_I2C I2C_AS3525
|
||||
|
||||
#define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */
|
||||
#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
|
||||
#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
|
||||
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
|
||||
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
||||
|
||||
/* define this if the unit should not shut down on low battery. */
|
||||
#define NO_LOW_BATTERY_SHUTDOWN
|
||||
|
||||
#ifndef SIMULATOR
|
||||
|
||||
/* Define this if you have an AMS AS3525 */
|
||||
#define CONFIG_CPU AS3525
|
||||
|
||||
/* Define this if you have ATA power-off control */
|
||||
#define HAVE_ATA_POWER_OFF
|
||||
|
||||
/* Define this to the CPU frequency */
|
||||
#define CPU_FREQ 120000000
|
||||
|
||||
/* Offset ( in the firmware file's header ) to the file CRC */
|
||||
#define FIRMWARE_OFFSET_FILE_CRC 0
|
||||
|
||||
/* Offset ( in the firmware file's header ) to the real data */
|
||||
#define FIRMWARE_OFFSET_FILE_DATA 8
|
||||
|
||||
/* Software controlled LED */
|
||||
#define CONFIG_LED LED_VIRTUAL
|
||||
|
||||
#define CONFIG_LCD LCD_SSD1815
|
||||
|
||||
#define BOOTFILE_EXT "sansa"
|
||||
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
||||
#define BOOTDIR "/"
|
||||
|
||||
#define IBSS_ATTR_VOICE_STACK
|
||||
#define ICODE_ATTR_TREMOR_NOT_MDCT
|
||||
#define ICODE_ATTR_TREMOR_MDCT
|
||||
#define ICODE_ATTR_FLAC
|
||||
#define IBSS_ATTR_FLAC_DECODED0
|
||||
#define ICONST_ATTR_MPA_HUFFMAN
|
||||
#define IBSS_ATTR_MPC_SAMPLE_BUF
|
||||
#define ICODE_ATTR_ALAC
|
||||
#define IBSS_ATTR_SHORTEN_DECODED0
|
||||
|
||||
#endif /* SIMULATOR */
|
||||
|
|
@ -173,6 +173,7 @@
|
|||
#define I2C_DM320 12 /* DM320 style */
|
||||
#define I2C_S5L8700 13
|
||||
#define I2C_JZ47XX 14 /* Ingenic Jz47XX style */
|
||||
#define I2C_AS3525 15
|
||||
|
||||
/* CONFIG_LED */
|
||||
#define LED_REAL 1 /* SW controlled LED (Archos recorders, player) */
|
||||
|
|
@ -199,6 +200,7 @@
|
|||
#define RTC_S5L8700 14
|
||||
#define RTC_S35390A 15
|
||||
#define RTC_JZ47XX 16 /* Ingenic Jz47XX */
|
||||
#define RTC_AS3525 17
|
||||
|
||||
/* USB On-the-go */
|
||||
#define USBOTG_ISP1362 1362 /* iriver H300 */
|
||||
|
|
@ -206,6 +208,7 @@
|
|||
#define USBOTG_M5636 5636 /* iAudio X5 */
|
||||
#define USBOTG_ARC 5020 /* PortalPlayer 502x */
|
||||
#define USBOTG_JZ4740 4740 /* Ingenic Jz4740/Jz4732 */
|
||||
#define USBOTG_AS3525 3525 /* AMS AS3525 */
|
||||
|
||||
/* Multiple cores */
|
||||
#define CPU 0
|
||||
|
|
@ -306,6 +309,10 @@
|
|||
#include "config-ondavx767.h"
|
||||
#elif defined(SANSA_CLIP)
|
||||
#include "config-clip.h"
|
||||
#elif defined(SANSA_E200V2)
|
||||
#include "config-e200v2.h"
|
||||
#elif defined(SANSA_M200V2)
|
||||
#include "config-m200v2.h"
|
||||
#else
|
||||
/* no known platform */
|
||||
#endif
|
||||
|
|
|
|||
24
firmware/target/arm/as3525/sansa-e200v2/adc-target.h
Normal file
24
firmware/target/arm/as3525/sansa-e200v2/adc-target.h
Normal file
|
|
@ -0,0 +1,24 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2008 ??
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#ifndef _ADC_TARGET_H_
|
||||
#define _ADC_TARGET_H_
|
||||
|
||||
#endif /* _ADC_TARGET_H_ */
|
||||
37
firmware/target/arm/as3525/sansa-e200v2/backlight-target.h
Normal file
37
firmware/target/arm/as3525/sansa-e200v2/backlight-target.h
Normal file
|
|
@ -0,0 +1,37 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2008 ??
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#ifndef BACKLIGHT_TARGET_H
|
||||
#define BACKLIGHT_TARGET_H
|
||||
|
||||
static inline bool _backlight_init(void)
|
||||
{
|
||||
return true;
|
||||
}
|
||||
|
||||
static inline void _backlight_on(void)
|
||||
{
|
||||
}
|
||||
|
||||
static inline void _backlight_off(void)
|
||||
{
|
||||
}
|
||||
|
||||
#endif
|
||||
98
firmware/target/arm/as3525/sansa-e200v2/button-e200v2.c
Normal file
98
firmware/target/arm/as3525/sansa-e200v2/button-e200v2.c
Normal file
|
|
@ -0,0 +1,98 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2006 by Barry Wardell
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* Taken from button-h10.c by Barry Wardell and reverse engineering by MrH. */
|
||||
|
||||
#include "system.h"
|
||||
#include "button.h"
|
||||
#include "backlight.h"
|
||||
#include "powermgmt.h"
|
||||
|
||||
#define WHEEL_REPEAT_INTERVAL 300000
|
||||
#define WHEEL_FAST_ON_INTERVAL 20000
|
||||
#define WHEEL_FAST_OFF_INTERVAL 60000
|
||||
#define WHEELCLICKS_PER_ROTATION 48 /* wheelclicks per full rotation */
|
||||
|
||||
/* Clickwheel */
|
||||
#ifndef BOOTLOADER
|
||||
static unsigned int old_wheel_value = 0;
|
||||
static unsigned int wheel_repeat = BUTTON_NONE;
|
||||
static unsigned int wheel_click_count = 0;
|
||||
static unsigned int wheel_delta = 0;
|
||||
static int wheel_fast_mode = 0;
|
||||
static unsigned long last_wheel_usec = 0;
|
||||
static unsigned long wheel_velocity = 0;
|
||||
static long last_wheel_post = 0;
|
||||
static long next_backlight_on = 0;
|
||||
/* Buttons */
|
||||
static bool hold_button = false;
|
||||
static bool hold_button_old = false;
|
||||
#define _button_hold() hold_button
|
||||
#else
|
||||
#define _button_hold() false /* FIXME */
|
||||
#endif /* BOOTLOADER */
|
||||
static int int_btn = BUTTON_NONE;
|
||||
|
||||
void button_init_device(void)
|
||||
{
|
||||
}
|
||||
|
||||
bool button_hold(void)
|
||||
{
|
||||
return _button_hold();
|
||||
}
|
||||
|
||||
/* clickwheel */
|
||||
#ifndef BOOTLOADER
|
||||
void clickwheel_int(void)
|
||||
{
|
||||
}
|
||||
#endif /* BOOTLOADER */
|
||||
|
||||
/* device buttons */
|
||||
void button_int(void)
|
||||
{
|
||||
unsigned char state;
|
||||
|
||||
int_btn = BUTTON_NONE;
|
||||
|
||||
}
|
||||
|
||||
/*
|
||||
* Get button pressed from hardware
|
||||
*/
|
||||
int button_read_device(void)
|
||||
{
|
||||
#ifdef BOOTLOADER
|
||||
/* Read buttons directly in the bootloader */
|
||||
button_int();
|
||||
#else
|
||||
/* light handling */
|
||||
if (hold_button != hold_button_old)
|
||||
{
|
||||
hold_button_old = hold_button;
|
||||
backlight_hold_changed(hold_button);
|
||||
}
|
||||
#endif /* BOOTLOADER */
|
||||
|
||||
/* The int_btn variable is set in the button interrupt handler */
|
||||
return int_btn;
|
||||
}
|
||||
60
firmware/target/arm/as3525/sansa-e200v2/button-target.h
Normal file
60
firmware/target/arm/as3525/sansa-e200v2/button-target.h
Normal file
|
|
@ -0,0 +1,60 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2006 by Barry Wardell
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifndef _BUTTON_TARGET_H_
|
||||
#define _BUTTON_TARGET_H_
|
||||
|
||||
#include <stdbool.h>
|
||||
#include "config.h"
|
||||
|
||||
#define HAS_BUTTON_HOLD
|
||||
|
||||
bool button_hold(void);
|
||||
void button_init_device(void);
|
||||
int button_read_device(void);
|
||||
#ifndef BOOTLOADER
|
||||
void clickwheel_int(void);
|
||||
#endif
|
||||
void button_int(void);
|
||||
|
||||
/* Sandisk Sansa E200 button codes */
|
||||
|
||||
/* Main unit's buttons */
|
||||
#define BUTTON_REC 0x00000001
|
||||
#define BUTTON_DOWN 0x00000002
|
||||
#define BUTTON_RIGHT 0x00000004
|
||||
#define BUTTON_LEFT 0x00000008
|
||||
#define BUTTON_SELECT 0x00000010
|
||||
#define BUTTON_UP 0x00000020
|
||||
#define BUTTON_POWER 0x00000040
|
||||
|
||||
#define BUTTON_SCROLL_BACK 0x00000080
|
||||
#define BUTTON_SCROLL_FWD 0x00000100
|
||||
|
||||
#define BUTTON_MAIN 0x00000fff
|
||||
|
||||
/* No Remote control */
|
||||
#define BUTTON_REMOTE 0
|
||||
|
||||
#define POWEROFF_BUTTON BUTTON_POWER
|
||||
#define POWEROFF_COUNT 10
|
||||
|
||||
#endif /* _BUTTON_TARGET_H_ */
|
||||
385
firmware/target/arm/as3525/sansa-e200v2/lcd-e200v2.c
Normal file
385
firmware/target/arm/as3525/sansa-e200v2/lcd-e200v2.c
Normal file
|
|
@ -0,0 +1,385 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2004 by Linus Nielsen Feltzing
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#include "config.h"
|
||||
|
||||
#include "cpu.h"
|
||||
#include "lcd.h"
|
||||
#include "kernel.h"
|
||||
#include "thread.h"
|
||||
#include <string.h>
|
||||
#include <stdlib.h>
|
||||
#include "file.h"
|
||||
#include "debug.h"
|
||||
#include "system.h"
|
||||
#include "font.h"
|
||||
#include "bidi.h"
|
||||
|
||||
static bool display_on = false; /* is the display turned on? */
|
||||
static bool display_flipped = false;
|
||||
static int xoffset = 0; /* needed for flip */
|
||||
|
||||
/* register defines */
|
||||
#define R_START_OSC 0x00
|
||||
#define R_DRV_OUTPUT_CONTROL 0x01
|
||||
#define R_DRV_WAVEFORM_CONTROL 0x02
|
||||
#define R_ENTRY_MODE 0x03
|
||||
#define R_COMPARE_REG1 0x04
|
||||
#define R_COMPARE_REG2 0x05
|
||||
|
||||
#define R_DISP_CONTROL1 0x07
|
||||
#define R_DISP_CONTROL2 0x08
|
||||
#define R_DISP_CONTROL3 0x09
|
||||
|
||||
#define R_FRAME_CYCLE_CONTROL 0x0b
|
||||
#define R_EXT_DISP_IF_CONTROL 0x0c
|
||||
|
||||
#define R_POWER_CONTROL1 0x10
|
||||
#define R_POWER_CONTROL2 0x11
|
||||
#define R_POWER_CONTROL3 0x12
|
||||
#define R_POWER_CONTROL4 0x13
|
||||
|
||||
#define R_RAM_ADDR_SET 0x21
|
||||
#define R_WRITE_DATA_2_GRAM 0x22
|
||||
|
||||
#define R_GAMMA_FINE_ADJ_POS1 0x30
|
||||
#define R_GAMMA_FINE_ADJ_POS2 0x31
|
||||
#define R_GAMMA_FINE_ADJ_POS3 0x32
|
||||
#define R_GAMMA_GRAD_ADJ_POS 0x33
|
||||
|
||||
#define R_GAMMA_FINE_ADJ_NEG1 0x34
|
||||
#define R_GAMMA_FINE_ADJ_NEG2 0x35
|
||||
#define R_GAMMA_FINE_ADJ_NEG3 0x36
|
||||
#define R_GAMMA_GRAD_ADJ_NEG 0x37
|
||||
|
||||
#define R_GAMMA_AMP_ADJ_RES_POS 0x38
|
||||
#define R_GAMMA_AMP_AVG_ADJ_RES_NEG 0x39
|
||||
|
||||
#define R_GATE_SCAN_POS 0x40
|
||||
#define R_VERT_SCROLL_CONTROL 0x41
|
||||
#define R_1ST_SCR_DRV_POS 0x42
|
||||
#define R_2ND_SCR_DRV_POS 0x43
|
||||
#define R_HORIZ_RAM_ADDR_POS 0x44
|
||||
#define R_VERT_RAM_ADDR_POS 0x45
|
||||
|
||||
#define LCD_CMD (*(volatile unsigned short *)0xf0000000)
|
||||
#define LCD_DATA (*(volatile unsigned short *)0xf0000002)
|
||||
|
||||
#define R_ENTRY_MODE_HORZ 0x7030
|
||||
#define R_ENTRY_MODE_VERT 0x7038
|
||||
|
||||
/* TODO: Implement this function */
|
||||
static void lcd_delay(int x)
|
||||
{
|
||||
(void)x;
|
||||
}
|
||||
|
||||
/* DBOP initialisation, do what OF does */
|
||||
static void ams3525_dbop_init(void)
|
||||
{
|
||||
|
||||
/* TODO: More... */
|
||||
|
||||
DBOP_TIMPOL_01 = 0xe167e167;
|
||||
DBOP_TIMPOL_23 = 0xe167006e;
|
||||
DBOP_CTRL = 0x41008;
|
||||
|
||||
GPIOB_AFSEL = 0xfc;
|
||||
GPIOC_AFSEL = 0xff;
|
||||
|
||||
DBOP_TIMPOL_23 = 0x6000e;
|
||||
DBOP_CTRL = 0x51008;
|
||||
DBOP_TIMPOL_01 = 0x6e167;
|
||||
DBOP_TIMPOL_23 = 0xa167e06f;
|
||||
|
||||
/* TODO: More... */
|
||||
}
|
||||
|
||||
static void lcd_write_reg(int reg, int value)
|
||||
{
|
||||
DBOP_CTRL &= ~(1<<14);
|
||||
|
||||
DBOP_TIMPOL_23 = 0xa167006e;
|
||||
|
||||
DBOP_DOUT = reg;
|
||||
|
||||
/* Wait for fifo to empty */
|
||||
while ((DBOP_STAT & (1<<10)) == 0);
|
||||
|
||||
DBOP_TIMPOL_23 = 0xa167e06f;
|
||||
|
||||
|
||||
DBOP_DOUT = value;
|
||||
|
||||
/* Wait for fifo to empty */
|
||||
while ((DBOP_STAT & (1<<10)) == 0);
|
||||
}
|
||||
|
||||
void lcd_write_data(const fb_data* p_bytes, int count)
|
||||
{
|
||||
(void)p_bytes;
|
||||
(void)count;
|
||||
}
|
||||
|
||||
|
||||
/*** hardware configuration ***/
|
||||
|
||||
void lcd_set_contrast(int val)
|
||||
{
|
||||
(void)val;
|
||||
}
|
||||
|
||||
void lcd_set_invert_display(bool yesno)
|
||||
{
|
||||
(void)yesno;
|
||||
}
|
||||
|
||||
static void flip_lcd(bool yesno)
|
||||
{
|
||||
(void)yesno;
|
||||
}
|
||||
|
||||
|
||||
/* turn the display upside down (call lcd_update() afterwards) */
|
||||
void lcd_set_flip(bool yesno)
|
||||
{
|
||||
display_flipped = yesno;
|
||||
xoffset = yesno ? 4 : 0;
|
||||
|
||||
if (display_on)
|
||||
flip_lcd(yesno);
|
||||
}
|
||||
|
||||
static void _display_on(void)
|
||||
{
|
||||
/* Initialisation the display the same way as the original firmware */
|
||||
|
||||
lcd_write_reg(R_START_OSC, 0x0001); /* Start Oscilation */
|
||||
|
||||
lcd_write_reg(R_DRV_OUTPUT_CONTROL, 0x011b); /* 220 lines, GS=0, SS=1 */
|
||||
|
||||
/* B/C = 1: n-line inversion form
|
||||
* EOR = 1: polarity inversion occurs by applying an EOR to odd/even
|
||||
* frame select signal and an n-line inversion signal.
|
||||
* FLD = 01b: 1 field interlaced scan, external display iface */
|
||||
lcd_write_reg(R_DRV_WAVEFORM_CONTROL, 0x0700);
|
||||
|
||||
/* Address counter updated in horizontal direction; left to right;
|
||||
* vertical increment horizontal increment.
|
||||
* data format for 8bit transfer or spi = 65k (5,6,5) */
|
||||
lcd_write_reg(R_ENTRY_MODE, 0x0030);
|
||||
|
||||
/* Replace data on writing to GRAM */
|
||||
lcd_write_reg(R_COMPARE_REG1, 0);
|
||||
lcd_write_reg(R_COMPARE_REG2, 0);
|
||||
|
||||
lcd_write_reg(R_DISP_CONTROL1, 0x0000); /* GON = 0, DTE = 0, D1-0 = 00b */
|
||||
|
||||
/* Front porch lines: 2; Back porch lines: 2; */
|
||||
lcd_write_reg(R_DISP_CONTROL2, 0x0203);
|
||||
|
||||
/* Scan cycle = 0 frames */
|
||||
lcd_write_reg(R_DISP_CONTROL3, 0x0000);
|
||||
|
||||
/* 16 clocks */
|
||||
lcd_write_reg(R_FRAME_CYCLE_CONTROL, 0x0000);
|
||||
|
||||
/* 18-bit RGB interface (one transfer/pixel)
|
||||
* internal clock operation;
|
||||
* System interface/VSYNC interface */
|
||||
lcd_write_reg(R_EXT_DISP_IF_CONTROL, 0x0000);
|
||||
|
||||
|
||||
/* zero everything*/
|
||||
lcd_write_reg(R_POWER_CONTROL1, 0x0000); /* STB = 0, SLP = 0 */
|
||||
|
||||
lcd_delay(10);
|
||||
|
||||
/* initialise power supply */
|
||||
|
||||
/* DC12-10 = 000b: Step-up1 = clock/8,
|
||||
* DC02-00 = 000b: Step-up2 = clock/16,
|
||||
* VC2-0 = 010b: VciOUT = 0.87 * VciLVL */
|
||||
lcd_write_reg(R_POWER_CONTROL2, 0x0002);
|
||||
|
||||
/* VRH3-0 = 1000b: Vreg1OUT = REGP * 1.90 */
|
||||
lcd_write_reg(R_POWER_CONTROL3, 0x0008);
|
||||
|
||||
lcd_delay(40);
|
||||
|
||||
lcd_write_reg(R_POWER_CONTROL4, 0x0000); /* VCOMG = 0 */
|
||||
|
||||
/* This register is unknown */
|
||||
lcd_write_reg(0x56, 0x80f);
|
||||
|
||||
|
||||
lcd_write_reg(R_POWER_CONTROL1, 0x4140);
|
||||
|
||||
lcd_delay(10);
|
||||
|
||||
lcd_write_reg(R_POWER_CONTROL2, 0x0000);
|
||||
lcd_write_reg(R_POWER_CONTROL3, 0x0013);
|
||||
|
||||
lcd_delay(20);
|
||||
|
||||
lcd_write_reg(R_POWER_CONTROL4, 0x6d0e);
|
||||
|
||||
lcd_delay(20);
|
||||
|
||||
lcd_write_reg(R_POWER_CONTROL4, 0x6d0e);
|
||||
|
||||
lcd_write_reg(R_GAMMA_FINE_ADJ_POS1, 0x0002);
|
||||
lcd_write_reg(R_GAMMA_FINE_ADJ_POS2, 0x0707);
|
||||
lcd_write_reg(R_GAMMA_FINE_ADJ_POS3, 0x0182);
|
||||
lcd_write_reg(R_GAMMA_GRAD_ADJ_POS, 0x0203);
|
||||
lcd_write_reg(R_GAMMA_FINE_ADJ_NEG1, 0x0706);
|
||||
lcd_write_reg(R_GAMMA_FINE_ADJ_NEG2, 0x0006);
|
||||
lcd_write_reg(R_GAMMA_FINE_ADJ_NEG3, 0x0706);
|
||||
lcd_write_reg(R_GAMMA_GRAD_ADJ_NEG, 0x0000);
|
||||
lcd_write_reg(R_GAMMA_AMP_ADJ_RES_POS, 0x030f);
|
||||
lcd_write_reg(R_GAMMA_AMP_AVG_ADJ_RES_NEG, 0x0f08);
|
||||
|
||||
|
||||
lcd_write_reg(R_RAM_ADDR_SET, 0);
|
||||
lcd_write_reg(R_GATE_SCAN_POS, 0);
|
||||
lcd_write_reg(R_VERT_SCROLL_CONTROL, 0);
|
||||
|
||||
lcd_write_reg(R_1ST_SCR_DRV_POS, 219 << 8);
|
||||
lcd_write_reg(R_2ND_SCR_DRV_POS, 219 << 8);
|
||||
|
||||
lcd_write_reg(R_HORIZ_RAM_ADDR_POS, 175 << 8);
|
||||
lcd_write_reg(R_VERT_RAM_ADDR_POS, 219 << 8);
|
||||
|
||||
|
||||
lcd_write_reg(R_DISP_CONTROL1, 0x0037);
|
||||
|
||||
display_on=true; /* must be done before calling lcd_update() */
|
||||
lcd_update();
|
||||
}
|
||||
|
||||
/* LCD init */
|
||||
void lcd_init_device(void)
|
||||
{
|
||||
ams3525_dbop_init();
|
||||
|
||||
/* Init GPIOs the same as the OF */
|
||||
|
||||
GPIOA_DIR |= (1<<5);
|
||||
GPIOA_PIN(5) = 0;
|
||||
|
||||
GPIOA_PIN(3) = (1<<3);
|
||||
|
||||
GPIOA_DIR |= (3<<3);
|
||||
|
||||
GPIOA_PIN(3) = (1<<3);
|
||||
|
||||
GPIOA_PIN(4) = 0; //c80b0040 := 0;
|
||||
|
||||
GPIOA_DIR |= (1<<7);
|
||||
GPIOA_PIN(7) = 0;
|
||||
|
||||
CCU_IO &= ~(1<<2);
|
||||
CCU_IO &= ~(1<<3);
|
||||
|
||||
GPIOD_DIR |= (1<<7);
|
||||
|
||||
#if 0
|
||||
/* TODO: This code is conditional on a variable in the OF init, we need to
|
||||
work out what it means */
|
||||
|
||||
GPIOD_PIN(7) = (1<<7);
|
||||
GPIOD_DIR |= (1<<7);
|
||||
#endif
|
||||
|
||||
lcd_delay(1);
|
||||
|
||||
GPIOA_PIN(5) = (1<<5);
|
||||
|
||||
lcd_delay(1);
|
||||
|
||||
_display_on();
|
||||
}
|
||||
|
||||
void lcd_enable(bool on)
|
||||
{
|
||||
if(display_on!=on)
|
||||
{
|
||||
if(on)
|
||||
{
|
||||
_display_on();
|
||||
lcd_call_enable_hook();
|
||||
}
|
||||
else
|
||||
{
|
||||
/* TODO: Implement off sequence */
|
||||
display_on=false;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
bool lcd_enabled(void)
|
||||
{
|
||||
return display_on;
|
||||
}
|
||||
|
||||
/*** update functions ***/
|
||||
|
||||
/* Performance function to blit a YUV bitmap directly to the LCD
|
||||
* src_x, src_y, width and height should be even
|
||||
* x, y, width and height have to be within LCD bounds
|
||||
*/
|
||||
void lcd_blit_yuv(unsigned char * const src[3],
|
||||
int src_x, int src_y, int stride,
|
||||
int x, int y, int width, int height)
|
||||
{
|
||||
(void)src;
|
||||
(void)src_x;
|
||||
(void)src_y;
|
||||
(void)stride;
|
||||
(void)x;
|
||||
(void)y;
|
||||
(void)width;
|
||||
(void)height;
|
||||
}
|
||||
|
||||
/* Update the display.
|
||||
This must be called after all other LCD functions that change the display. */
|
||||
void lcd_update(void) ICODE_ATTR;
|
||||
void lcd_update(void)
|
||||
{
|
||||
if(display_on){
|
||||
/* TODO */
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/* Update a fraction of the display. */
|
||||
void lcd_update_rect(int, int, int, int) ICODE_ATTR;
|
||||
void lcd_update_rect(int x, int y, int width, int height)
|
||||
{
|
||||
(void)x;
|
||||
(void)y;
|
||||
(void)width;
|
||||
(void)height;
|
||||
|
||||
if(display_on) {
|
||||
/* TODO */
|
||||
}
|
||||
}
|
||||
28
firmware/target/arm/as3525/sansa-e200v2/system-target.h
Normal file
28
firmware/target/arm/as3525/sansa-e200v2/system-target.h
Normal file
|
|
@ -0,0 +1,28 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2008 ??
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#ifndef SYSTEM_TARGET_H
|
||||
#define SYSTEM_TARGET_H
|
||||
|
||||
#include "system-arm.h"
|
||||
|
||||
#define CPUFREQ_MAX 250000000
|
||||
|
||||
#endif /* SYSTEM_TARGET_H */
|
||||
38
firmware/target/arm/as3525/sansa-e200v2/timer-target.h
Normal file
38
firmware/target/arm/as3525/sansa-e200v2/timer-target.h
Normal file
|
|
@ -0,0 +1,38 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2008 ??
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#ifndef TIMER_TARGET_H
|
||||
#define TIMER_TARGET_H
|
||||
|
||||
bool __timer_set(long cycles, bool set);
|
||||
bool __timer_register(void);
|
||||
void __timer_unregister(void);
|
||||
|
||||
#define __TIMER_SET(cycles, set) \
|
||||
__timer_set(cycles, set)
|
||||
|
||||
#define __TIMER_REGISTER(reg_prio, unregister_callback, cycles, \
|
||||
int_prio, timer_callback) \
|
||||
__timer_register()
|
||||
|
||||
#define __TIMER_UNREGISTER(...) \
|
||||
__timer_unregister()
|
||||
|
||||
#endif /* TIMER_TARGET_H */
|
||||
24
firmware/target/arm/as3525/sansa-m200v2/adc-target.h
Normal file
24
firmware/target/arm/as3525/sansa-m200v2/adc-target.h
Normal file
|
|
@ -0,0 +1,24 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2008 ??
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#ifndef _ADC_TARGET_H_
|
||||
#define _ADC_TARGET_H_
|
||||
|
||||
#endif /* _ADC_TARGET_H_ */
|
||||
37
firmware/target/arm/as3525/sansa-m200v2/backlight-target.h
Normal file
37
firmware/target/arm/as3525/sansa-m200v2/backlight-target.h
Normal file
|
|
@ -0,0 +1,37 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2008 ??
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#ifndef BACKLIGHT_TARGET_H
|
||||
#define BACKLIGHT_TARGET_H
|
||||
|
||||
static inline bool _backlight_init(void)
|
||||
{
|
||||
return true;
|
||||
}
|
||||
|
||||
static inline void _backlight_on(void)
|
||||
{
|
||||
}
|
||||
|
||||
static inline void _backlight_off(void)
|
||||
{
|
||||
}
|
||||
|
||||
#endif
|
||||
43
firmware/target/arm/as3525/sansa-m200v2/button-m200v2.c
Normal file
43
firmware/target/arm/as3525/sansa-m200v2/button-m200v2.c
Normal file
|
|
@ -0,0 +1,43 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2008 by ??
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#include "config.h"
|
||||
#include "cpu.h"
|
||||
#include "button.h"
|
||||
#include "adc.h"
|
||||
|
||||
void button_init_device(void)
|
||||
{
|
||||
|
||||
}
|
||||
|
||||
int button_read_device(void)
|
||||
{
|
||||
int btn = BUTTON_NONE;
|
||||
|
||||
return btn;
|
||||
}
|
||||
|
||||
bool button_hold(void)
|
||||
{
|
||||
/* TODO */
|
||||
return false;
|
||||
}
|
||||
54
firmware/target/arm/as3525/sansa-m200v2/button-target.h
Normal file
54
firmware/target/arm/as3525/sansa-m200v2/button-target.h
Normal file
|
|
@ -0,0 +1,54 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2007 by Dave Chapman
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifndef _BUTTON_TARGET_H_
|
||||
#define _BUTTON_TARGET_H_
|
||||
|
||||
#include <stdbool.h>
|
||||
#include "config.h"
|
||||
|
||||
#define HAS_BUTTON_HOLD
|
||||
|
||||
void button_init_device(void);
|
||||
int button_read_device(void);
|
||||
bool button_hold(void);
|
||||
|
||||
/* Main unit's buttons */
|
||||
#define BUTTON_MENU 0x00000001
|
||||
#define BUTTON_VOLUP 0x00000002
|
||||
#define BUTTON_VOLDOWN 0x00000004
|
||||
#define BUTTON_PLAYPAUSE 0x00000008
|
||||
#define BUTTON_REPEATAB 0x00000010
|
||||
#define BUTTON_LEFT 0x00000020
|
||||
#define BUTTON_RIGHT 0x00000040
|
||||
#define BUTTON_SELECT 0x00000080
|
||||
|
||||
#define BUTTON_MAIN (BUTTON_MENU|BUTTON_VOLUP|BUTTON_VOLDOWN\
|
||||
|BUTTON_PLAYPAUSE|BUTTON_REPEATAB|BUTTON_LEFT\
|
||||
|BUTTON_RIGHT|BUTTON_SELECT)
|
||||
|
||||
#define BUTTON_REMOTE 0
|
||||
|
||||
/* Software power-off */
|
||||
#define POWEROFF_BUTTON BUTTON_MENU
|
||||
#define POWEROFF_COUNT 40
|
||||
|
||||
#endif /* _BUTTON_TARGET_H_ */
|
||||
28
firmware/target/arm/as3525/sansa-m200v2/system-target.h
Normal file
28
firmware/target/arm/as3525/sansa-m200v2/system-target.h
Normal file
|
|
@ -0,0 +1,28 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2008 ??
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#ifndef SYSTEM_TARGET_H
|
||||
#define SYSTEM_TARGET_H
|
||||
|
||||
#include "system-arm.h"
|
||||
|
||||
#define CPUFREQ_MAX 250000000
|
||||
|
||||
#endif /* SYSTEM_TARGET_H */
|
||||
38
firmware/target/arm/as3525/sansa-m200v2/timer-target.h
Normal file
38
firmware/target/arm/as3525/sansa-m200v2/timer-target.h
Normal file
|
|
@ -0,0 +1,38 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2008 ??
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#ifndef TIMER_TARGET_H
|
||||
#define TIMER_TARGET_H
|
||||
|
||||
bool __timer_set(long cycles, bool set);
|
||||
bool __timer_register(void);
|
||||
void __timer_unregister(void);
|
||||
|
||||
#define __TIMER_SET(cycles, set) \
|
||||
__timer_set(cycles, set)
|
||||
|
||||
#define __TIMER_REGISTER(reg_prio, unregister_callback, cycles, \
|
||||
int_prio, timer_callback) \
|
||||
__timer_register()
|
||||
|
||||
#define __TIMER_UNREGISTER(...) \
|
||||
__timer_unregister()
|
||||
|
||||
#endif /* TIMER_TARGET_H */
|
||||
|
|
@ -68,6 +68,82 @@
|
|||
#define LCD_CNTL_HIGHCOL 0x10 /* Upper column address */
|
||||
#define LCD_CNTL_LOWCOL 0x00 /* Lower column address */
|
||||
|
||||
|
||||
#if CONFIG_CPU == AS3525
|
||||
#include "as3525.h"
|
||||
|
||||
void lcd_write_command(int byte)
|
||||
{
|
||||
DBOP_TIMPOL_23 = 0x6006E;
|
||||
DBOP_DOUT = byte;
|
||||
|
||||
/* While push fifo is not empty */
|
||||
while ((DBOP_STAT & (1<<10)) == 0)
|
||||
;
|
||||
|
||||
DBOP_TIMPOL_23 = 0x6E06F;
|
||||
}
|
||||
|
||||
void lcd_write_data(const fb_data* p_bytes, int count)
|
||||
{
|
||||
while (count--)
|
||||
{
|
||||
/* Write pixels */
|
||||
DBOP_DOUT = *p_bytes++;
|
||||
|
||||
/* While push fifo is not empty */
|
||||
while ((DBOP_STAT & (1<<10)) == 0)
|
||||
;
|
||||
}
|
||||
}
|
||||
|
||||
static inline void ams3525_dbop_init(void)
|
||||
{
|
||||
int clkdiv = 4 - 1;
|
||||
|
||||
CGU_DBOP |= (1<<3) /* clk enable */ | clkdiv /* clkdiv: 3 bits */ ;
|
||||
|
||||
GPIOB_AFSEL = 0x0f; /* DBOP on pin 3:0 */
|
||||
GPIOC_AFSEL = 0xff; /* DBOP on pins 7:0 */
|
||||
|
||||
DBOP_CTRL = 0x50008;
|
||||
DBOP_TIMPOL_01 = 0xA167E167;
|
||||
DBOP_TIMPOL_23 = 0x6E06F; /* this value is used for data (pixels) write */
|
||||
}
|
||||
|
||||
|
||||
/* LCD init, largely based on what OF does */
|
||||
void lcd_init_device(void)
|
||||
{
|
||||
int delay;
|
||||
|
||||
ams3525_dbop_init();
|
||||
|
||||
GPIOB_DIR |= (1<<4);
|
||||
GPIOD_DIR |= (1<<1)|(1<<3);
|
||||
|
||||
GPIOD_PIN(1) = (1<<1); /* backlight on */
|
||||
|
||||
GPIOD_PIN(3) = (1<<3);
|
||||
delay = 10; while(delay--) ;
|
||||
|
||||
GPIOB_PIN(4) = (1<<4);
|
||||
delay = 10; while(delay--) ;
|
||||
|
||||
lcd_write_command(LCD_SET_LCD_BIAS);
|
||||
lcd_write_command(LCD_SET_SEGMENT_REMAP);
|
||||
lcd_write_command(LCD_SET_COM_OUTPUT_SCAN_DIRECTION);
|
||||
lcd_write_command(LCD_SET_INTERNAL_REGULATOR_RESISTOR_RATIO|0x5);
|
||||
lcd_set_contrast(lcd_default_contrast());
|
||||
lcd_write_command(LCD_SET_REVERSE_DISPLAY);
|
||||
lcd_write_command(LCD_SET_POWER_CONTROL_REGISTER|0x7);
|
||||
lcd_write_command(LCD_SET_DISPLAY_ON);
|
||||
lcd_write_command(LCD_SET_DISPLAY_START_LINE);
|
||||
}
|
||||
|
||||
|
||||
#elif defined(CPU_TCC77X)
|
||||
|
||||
/* TCC77x specific defines */
|
||||
#define LCD_BASE 0x50000000
|
||||
#define LCD_CMD *(volatile unsigned char*)(LCD_BASE)
|
||||
|
|
@ -98,42 +174,6 @@ void lcd_write_data(const fb_data* p_bytes, int count)
|
|||
}
|
||||
}
|
||||
|
||||
/* End of TCC77x specific defines */
|
||||
|
||||
|
||||
/** globals **/
|
||||
|
||||
static int xoffset; /* needed for flip */
|
||||
|
||||
/*** hardware configuration ***/
|
||||
|
||||
int lcd_default_contrast(void)
|
||||
{
|
||||
return 0x1f;
|
||||
}
|
||||
|
||||
void lcd_set_contrast(int val)
|
||||
{
|
||||
lcd_write_command(LCD_CNTL_CONTRAST);
|
||||
lcd_write_command(val);
|
||||
}
|
||||
|
||||
void lcd_set_invert_display(bool yesno)
|
||||
{
|
||||
if (yesno)
|
||||
lcd_write_command(LCD_SET_REVERSE_DISPLAY);
|
||||
else
|
||||
lcd_write_command(LCD_SET_NORMAL_DISPLAY);
|
||||
}
|
||||
|
||||
/* turn the display upside down (call lcd_update() afterwards) */
|
||||
void lcd_set_flip(bool yesno)
|
||||
{
|
||||
(void)yesno;
|
||||
/* TODO */
|
||||
}
|
||||
|
||||
|
||||
/* LCD init */
|
||||
void lcd_init_device(void)
|
||||
{
|
||||
|
|
@ -175,6 +215,43 @@ void lcd_init_device(void)
|
|||
lcd_update();
|
||||
}
|
||||
|
||||
/* End of TCC77x specific defines */
|
||||
#endif
|
||||
|
||||
|
||||
/** globals **/
|
||||
|
||||
static int xoffset; /* needed for flip */
|
||||
|
||||
/*** hardware configuration ***/
|
||||
|
||||
int lcd_default_contrast(void)
|
||||
{
|
||||
return 0x1f;
|
||||
}
|
||||
|
||||
void lcd_set_contrast(int val)
|
||||
{
|
||||
lcd_write_command(LCD_CNTL_CONTRAST);
|
||||
lcd_write_command(val);
|
||||
}
|
||||
|
||||
void lcd_set_invert_display(bool yesno)
|
||||
{
|
||||
if (yesno)
|
||||
lcd_write_command(LCD_SET_REVERSE_DISPLAY);
|
||||
else
|
||||
lcd_write_command(LCD_SET_NORMAL_DISPLAY);
|
||||
}
|
||||
|
||||
/* turn the display upside down (call lcd_update() afterwards) */
|
||||
void lcd_set_flip(bool yesno)
|
||||
{
|
||||
(void)yesno;
|
||||
/* TODO */
|
||||
}
|
||||
|
||||
|
||||
/*** Update functions ***/
|
||||
|
||||
/* Performance function that works with an external buffer
|
||||
|
|
@ -148,7 +148,7 @@ static const char* rb_model_names[] =
|
|||
"clip",
|
||||
NULL,
|
||||
"e2v2",
|
||||
NULL,
|
||||
"m2v2",
|
||||
NULL
|
||||
};
|
||||
|
||||
|
|
@ -157,10 +157,10 @@ static const char* rb_model_names[] =
|
|||
static const int rb_model_num[] =
|
||||
{
|
||||
0,
|
||||
50,
|
||||
0,
|
||||
51,
|
||||
40,
|
||||
0,
|
||||
41,
|
||||
42,
|
||||
0
|
||||
};
|
||||
|
||||
|
|
|
|||
42
tools/configure
vendored
42
tools/configure
vendored
|
|
@ -694,6 +694,8 @@ cat <<EOF
|
|||
33) Cowon D2 53) Sansa m200
|
||||
34) M3/M3L 54) Sansa c100
|
||||
55) Sansa Clip
|
||||
56) Sansa e200v2
|
||||
57) Sansa m200v2
|
||||
|
||||
==Tatung== ==Olympus== ==Logik==
|
||||
60) Elio TPJ-1022 70) M:Robe 500 80) DAX 1GB MP3/DAB
|
||||
|
|
@ -1698,6 +1700,46 @@ fi
|
|||
;;
|
||||
|
||||
|
||||
56|e200v2)
|
||||
target_id=51
|
||||
modelname="e200v2"
|
||||
target="-DSANSA_E200V2"
|
||||
memory=2 # FIXME - a guess
|
||||
arm9tdmicc
|
||||
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
||||
bmp2rb_native="$bmp2rb_mono"
|
||||
tool="$rootdir/tools/scramble -add=e2v2"
|
||||
output="rockbox.sansa"
|
||||
bootoutput="bootloader-e200v2.sansa"
|
||||
appextra="recorder:gui"
|
||||
plugins=""
|
||||
toolset=$scramblebitmaptools
|
||||
t_cpu="arm"
|
||||
t_manufacturer="as3525"
|
||||
t_model="sansa-clip"
|
||||
;;
|
||||
|
||||
|
||||
57|m200v2)
|
||||
target_id=52
|
||||
modelname="m200v2"
|
||||
target="-DSANSA_M200V2"
|
||||
memory=2 # FIXME - A guess
|
||||
arm9tdmicc
|
||||
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
||||
bmp2rb_native="$bmp2rb_mono"
|
||||
tool="$rootdir/tools/scramble -add=m2v2"
|
||||
output="rockbox.sansa"
|
||||
bootoutput="bootloader-m200v2.sansa"
|
||||
appextra="recorder:gui"
|
||||
plugins=""
|
||||
toolset=$scramblebitmaptools
|
||||
t_cpu="arm"
|
||||
t_manufacturer="as3525"
|
||||
t_model="sansa-m200v2"
|
||||
;;
|
||||
|
||||
|
||||
60|tpj1022)
|
||||
target_id=25
|
||||
modelname="tpj1022"
|
||||
|
|
|
|||
|
|
@ -122,7 +122,7 @@ void usage(void)
|
|||
"\t (X values: h100, h120, h140, h300, ipco, nano, ipvd, mn2g\n"
|
||||
"\t ip3g, ip4g, mini, iax5, iam5, iam3, h10, h10_5gb,\n"
|
||||
"\t tpj2, c200, e200, giga, gigs, m100, m500, d2,\n");
|
||||
printf("\t 9200, 1630, ldax, m200, clip, e2v2)\n");
|
||||
printf("\t 9200, 1630, ldax, m200, clip, e2v2, m2v2)\n");
|
||||
printf("\nNo option results in Archos standard player/recorder format.\n");
|
||||
|
||||
exit(1);
|
||||
|
|
@ -289,6 +289,8 @@ int main (int argc, char** argv)
|
|||
modelnum = 50;
|
||||
else if (!strcmp(&argv[1][5], "e2v2"))
|
||||
modelnum = 51;
|
||||
else if (!strcmp(&argv[1][5], "m2v2"))
|
||||
modelnum = 52;
|
||||
else {
|
||||
fprintf(stderr, "unsupported model: %s\n", &argv[1][5]);
|
||||
return 2;
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user