nihilazo/rockbox
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

USB detection changes. c200/e200: Consider USB to be powered when charger is plugged but detect USB connection by bus reset. When received, disconnect and restart the driver fully enabled. imx31: Fix hack used to make initial connect succeeded-- set PHY type before initial reset. General: Move some target code out of usb-drv-arc.c and implement it in respective usb sources and CPU headers so things stay clean.

Browse Source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19797 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Michael Sevakis 2009-01-19 13:41:25 +00:00
parent cef6399c4c
commit 616c98b38f
18 changed files with 280 additions and 148 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
bootloader/gigabeat-s.c
View File

@ -95,7 +95,6 @@ static void handle_usb(void)
if (!usb_plugged() || !pause_if_button_pressed(true))
{
/* Bang on the controller */
usb_init_device();
return;
}

3
firmware/export/config-c200.h
View File

@ -180,6 +180,9 @@
/* enable these for the experimental usb stack */
#define HAVE_USBSTACK
#ifndef BOOTLOADER
#define USB_DETECT_BY_DRV
#endif
#define USB_VENDOR_ID 0x0781
#define USB_PRODUCT_ID 0x7450

3
firmware/export/config-e200.h
View File

@ -177,6 +177,9 @@
/* enable these for the experimental usb stack */
#define HAVE_USBSTACK
#ifndef BOOTLOADER
#define USB_DETECT_BY_DRV
#endif
#define USB_VENDOR_ID 0x0781
#define USB_PRODUCT_ID 0x7421

6
firmware/export/config-gigabeat-s.h
View File

@ -176,10 +176,12 @@
/* USB On-the-go */
#define CONFIG_USBOTG USBOTG_ARC
/* enable these for the experimental usb stack */
/* enable these for the usb stack */
#define USE_ROCKBOX_USB
#define HAVE_USBSTACK
#define USB_STORAGE
/* usb stack and driver settings */
#define USB_PORTSCX_PHY_TYPE PORTSCX_PTS_ULPI
#define USB_VENDOR_ID 0x0930
#define USB_PRODUCT_ID 0x0010
@ -201,7 +203,7 @@
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8
#define HAVE_SERIAL
//#define HAVE_SERIAL
#define HAVE_VOLUME_IN_LIST
/*Remove Comments from UART_INT to enable the UART interrupts,*/

8
firmware/export/imx31l.h
View File

@ -36,7 +36,11 @@
#define FRAME_SIZE (240*320*2)
#define DEVBSS_ATTR __attribute__((section(".devbss"),nocommon))
#define QHARRAY_ATTR __attribute__((section(".qharray"),nocommon))
/* USBOTG */
#define USB_QHARRAY_ATTR __attribute__((section(".qharray"),nocommon,aligned(2048)))
#define USB_NUM_ENDPOINTS 8
#define USB_DEVBSS_ATTR DEVBSS_ATTR
#define USB_BASE OTG_BASE_ADDR
/*
* AIPS 1
@ -1580,6 +1584,4 @@
#define UART_FIFO_CTRL 0x881
#define TIMEOUT 1000
#define USB_BASE OTG_BASE_ADDR
#endif /* __IMX31L_H__ */

7
firmware/export/pp5020.h
View File

@ -23,7 +23,12 @@
/* All info gleaned and/or copied from the iPodLinux project. */
#define QHARRAY_ATTR __attribute__((section(".qharray"),nocommon))
/* USBOTG */
#define USB_NUM_ENDPOINTS 3
/* This needs to be 2048 byte aligned, but USB_QHARRAY_ATTR should take care
* of that */
#define USB_QHARRAY_ATTR __attribute__((section(".qharray"),nocommon,aligned(4)))
#define USB_DEVBSS_ATTR IBSS_ATTR
/* DRAM starts at 0x10000000, but in Rockbox we remap it to 0x00000000 */
#define DRAM_START 0x10000000

8
firmware/export/usb.h
View File

@ -33,8 +33,11 @@
enum {
USB_INSERTED, /* Event+State */
USB_EXTRACTED, /* Event+State */
#ifdef HAVE_USB_POWER
USB_POWERED, /* State */
#if defined(HAVE_USB_POWER) || defined(USB_DETECT_BY_DRV)
USB_POWERED, /* Event+State */
#endif
#ifdef USB_DETECT_BY_DRV
USB_UNPOWERED, /* Event */
#endif
#ifdef HAVE_LCD_BITMAP
USB_SCREENDUMP, /* State */
@ -107,6 +110,7 @@ struct usb_transfer_completion_event_data
void usb_init(void);
void usb_enable(bool on);
void usb_attach(void);
void usb_start_monitoring(void);
void usb_close(void);
void usb_acknowledge(long id);

10
firmware/export/usb_core.h
View File

@ -7,7 +7,7 @@
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2007 by Björn Stenberg
* Copyright (C) 2007 by Björn Stenberg
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@ -35,14 +35,6 @@
/* endpoints */
#define EP_CONTROL 0
#if CONFIG_CPU == IMX31L
#define NUM_ENDPOINTS 8
#define USBDEVBSS_ATTR DEVBSS_ATTR
#else
#define USBDEVBSS_ATTR IBSS_ATTR
#define NUM_ENDPOINTS 3
#endif
extern int usb_max_pkt_size;
struct usb_class_driver;

6
firmware/export/usb_drv.h
View File

@ -24,9 +24,13 @@
#include "kernel.h"
void usb_drv_startup(void);
void usb_drv_usb_detect_event(void); /* Target implemented */
void usb_drv_int_enable(bool enable); /* Target implemented */
void usb_drv_reset(void);
void usb_drv_init(void);
void usb_drv_exit(void);
void usb_drv_int(void);
void usb_drv_attach(void);
void usb_drv_int(void); /* Call from target INT handler */
void usb_drv_stall(int endpoint, bool stall,bool in);
bool usb_drv_stalled(int endpoint,bool in);
int usb_drv_send(int endpoint, void* ptr, int length);

8
firmware/target/arm/imx31/gigabeat-s/system-target.h
View File

@ -31,6 +31,14 @@
#define CPUFREQ_MAX CPU_FREQ
#endif
/* For USB driver - no accuracy assurance */
static inline void udelay(unsigned int usecs)
{
unsigned int x;
for (x = 0; x < 300*usecs; x++)
asm volatile ("");
}
#if 0
static inline void udelay(unsigned int usecs)
{

35
firmware/target/arm/imx31/gigabeat-s/usb-imx31.c
View File

@ -29,6 +29,7 @@
#include "usb-target.h"
#include "clkctl-imx31.h"
#include "power-imx31.h"
#include "avic-imx31.h"
#include "mc13783.h"
static int usb_status = USB_EXTRACTED;
@ -75,11 +76,7 @@ bool usb_plugged(void)
void usb_init_device(void)
{
imx31_clkctl_module_clock_gating(CG_USBOTG, CGM_ON_ALL);
enable_transceiver(true);
/* Module will be turned off later after firmware init */
/* Do one-time inits */
usb_drv_startup();
/* Initially poll */
@ -91,19 +88,37 @@ void usb_init_device(void)
void usb_enable(bool on)
{
/* Module clock should be on since since this could be called with
* OFF initially and writing module registers would hardlock otherwise. */
imx31_clkctl_module_clock_gating(CG_USBOTG, CGM_ON_ALL);
enable_transceiver(true);
if (on)
{
imx31_clkctl_module_clock_gating(CG_USBOTG, CGM_ON_ALL);
enable_transceiver(true);
usb_core_init();
}
else
{
/* Module clock should be on since this could be called first */
imx31_clkctl_module_clock_gating(CG_USBOTG, CGM_ON_ALL);
enable_transceiver(true);
usb_core_exit();
enable_transceiver(false);
imx31_clkctl_module_clock_gating(CG_USBOTG, CGM_OFF);
}
}
void usb_attach(void)
{
usb_enable(true);
}
static void __attribute__((interrupt("IRQ"))) USB_OTG_HANDLER(void)
{
usb_drv_int(); /* Call driver handler */
}
void usb_drv_int_enable(bool enable)
{
if (enable)
avic_enable_int(USB_OTG, IRQ, 7, USB_OTG_HANDLER);
else
avic_disable_int(USB_OTG);
}

10
firmware/target/arm/powermgmt-ascodec.c
View File

@ -27,6 +27,8 @@
#include "adc.h"
#include "powermgmt.h"
#include "power.h"
#include "usb-target.h"
#include "usb.h"
/*===========================================================================
* These parameters may be defined per target:
@ -132,6 +134,10 @@ static inline void charger_plugged(void)
{
batt_threshold = BATT_FULL_VOLTAGE; /* Start with topped value. */
battery_voltage_sync();
#if defined(USB_STATUS_BY_EVENT) && defined(USB_DETECT_BY_DRV)
/* Charger pin detect is USB pin detect */
usb_connect_event(true);
#endif
}
static inline void charger_control(void)
@ -186,6 +192,10 @@ static inline void charger_unplugged(void)
disable_charger();
if (charge_state >= CHARGE_STATE_ERROR)
charge_state = DISCHARGING; /* Reset error */
#if defined(USB_STATUS_BY_EVENT) && defined(USB_DETECT_BY_DRV)
/* Charger pin detect is USB pin detect */
usb_connect_event(false);
#endif
}
/* Main charging algorithm - called from powermgmt.c */

194
firmware/target/arm/usb-drv-arc.c
View File

@ -9,7 +9,7 @@
*
* Driver for ARC USBOTG Device Controller
*
* Copyright (C) 2007 by Björn Stenberg
* Copyright (C) 2007 by Björn Stenberg
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@ -33,11 +33,6 @@
//#define LOGF_ENABLE
#include "logf.h"
#if CONFIG_CPU == IMX31L
#include "avic-imx31.h"
static void __attribute__((interrupt("IRQ"))) USB_OTG_HANDLER(void);
#endif
/* USB device mode registers (Little Endian) */
#define REG_ID (*(volatile unsigned int *)(USB_BASE+0x000))
@ -326,8 +321,8 @@ struct transfer_descriptor {
unsigned int reserved;
} __attribute__ ((packed));
static struct transfer_descriptor td_array[NUM_ENDPOINTS*2]
USBDEVBSS_ATTR __attribute__((aligned(32)));
static struct transfer_descriptor td_array[USB_NUM_ENDPOINTS*2]
USB_DEVBSS_ATTR __attribute__((aligned(32)));
/* manual: 32.13.1 Endpoint Queue Head (dQH) */
struct queue_head {
@ -342,17 +337,10 @@ struct queue_head {
unsigned int wait; /* for softwate use, indicates if the transfer is blocking */
} __attribute__((packed));
#if CONFIG_CPU == IMX31L
static struct queue_head qh_array[NUM_ENDPOINTS*2]
QHARRAY_ATTR __attribute__((aligned (2048)));
#else
/* This still needs to be 2048 byte aligned, but QHARRAY_ATTR should take
care of that */
static struct queue_head qh_array[NUM_ENDPOINTS*2]
QHARRAY_ATTR __attribute__((aligned (4)));
#endif
static struct queue_head qh_array[USB_NUM_ENDPOINTS*2]
USB_QHARRAY_ATTR;
static struct wakeup transfer_completion_signal[NUM_ENDPOINTS*2]
static struct wakeup transfer_completion_signal[USB_NUM_ENDPOINTS*2]
SHAREDBSS_ATTR;
static const unsigned int pipe2mask[] = {
@ -363,7 +351,7 @@ static const unsigned int pipe2mask[] = {
0x10, 0x100000,
};
static char ep_allocation[NUM_ENDPOINTS];
static char ep_allocation[USB_NUM_ENDPOINTS];
/*-------------------------------------------------------------------------*/
static void transfer_completed(void);
@ -378,52 +366,46 @@ static void init_control_queue_heads(void);
static void init_bulk_queue_heads(void);
static void init_endpoints(void);
/*-------------------------------------------------------------------------*/
bool usb_drv_powered(void)
static void usb_drv_stop(void)
{
return (REG_OTGSC & OTGSC_B_SESSION_VALID) ? true : false;
/* disable interrupts */
REG_USBINTR = 0;
/* stop usb controller (disconnect) */
REG_USBCMD &= ~USBCMD_RUN;
}
void usb_drv_reset(void)
{
int oldlevel = disable_irq_save();
REG_USBCMD &= ~USBCMD_RUN;
restore_irq(oldlevel);
#ifdef USB_PORTSCX_PHY_TYPE
/* If a PHY type is specified, set it now */
REG_PORTSC1 = (REG_PORTSC1 & ~PORTSCX_PHY_TYPE_SEL) | USB_PORTSCX_PHY_TYPE;
#endif
sleep(HZ/20);
REG_USBCMD |= USBCMD_CTRL_RESET;
while (REG_USBCMD & USBCMD_CTRL_RESET);
}
/* One-time driver startup init */
void usb_drv_startup(void)
{
#if CONFIG_CPU == IMX31L && defined(BOOTLOADER)
/* This is the bootloader - activate the OTG controller or cold
* connect later could/will fail */
REG_USBCMD &= ~USBCMD_RUN;
sleep(HZ/20);
REG_USBCMD |= USBCMD_CTRL_RESET;
while (REG_USBCMD & USBCMD_CTRL_RESET);
/* Set to ULPI */
REG_PORTSC1 = (REG_PORTSC1 & ~PORTSCX_PHY_TYPE_SEL) | PORTSCX_PTS_ULPI;
sleep(HZ/10);
#endif
/* Initialize all the signal objects once */
int i;
for(i=0;i<NUM_ENDPOINTS*2;i++) {
for(i=0;i<USB_NUM_ENDPOINTS*2;i++) {
wakeup_init(&transfer_completion_signal[i]);
}
}
/* manual: 32.14.1 Device Controller Initialization */
void usb_drv_init(void)
static void _usb_drv_init(bool attach)
{
REG_USBCMD &= ~USBCMD_RUN;
sleep(HZ/20);
REG_USBCMD |= USBCMD_CTRL_RESET;
while (REG_USBCMD & USBCMD_CTRL_RESET);
usb_drv_reset();
REG_USBMODE = USBMODE_CTRL_MODE_DEVICE;
#if CONFIG_CPU == IMX31L
/* Set to ULPI */
REG_PORTSC1 = (REG_PORTSC1 & ~PORTSCX_PHY_TYPE_SEL) | PORTSCX_PTS_ULPI;
#endif
#ifdef USB_NO_HIGH_SPEED
/* Force device to full speed */
/* See 32.9.5.9.2 */
@ -436,69 +418,76 @@ void usb_drv_init(void)
REG_ENDPOINTLISTADDR = (unsigned int)qh_array;
REG_DEVICEADDR = 0;
/* enable USB interrupts */
REG_USBINTR =
USBINTR_INT_EN |
USBINTR_ERR_INT_EN |
USBINTR_PTC_DETECT_EN |
USBINTR_RESET_EN |
USBINTR_SYS_ERR_EN;
#if CONFIG_CPU == IMX31L
avic_enable_int(USB_OTG, IRQ, 7, USB_OTG_HANDLER);
#else
/* enable USB IRQ in CPU */
CPU_INT_EN = USB_MASK;
#ifdef USB_DETECT_BY_DRV
if (!attach) {
/* enable RESET interrupt */
REG_USBINTR = USBINTR_RESET_EN;
}
else
#endif
{
/* enable USB interrupts */
REG_USBINTR =
USBINTR_INT_EN |
USBINTR_ERR_INT_EN |
USBINTR_PTC_DETECT_EN |
USBINTR_RESET_EN;
}
usb_drv_int_enable(true);
/* go go go */
REG_USBCMD |= USBCMD_RUN;
logf("usb_drv_init() finished");
logf("usb id %x", REG_ID);
logf("usb dciversion %x", REG_DCIVERSION);
logf("usb dccparams %x", REG_DCCPARAMS);
/* now a bus reset will occur. see bus_reset() */
(void)attach;
}
/** With USB_DETECT_BY_DRV, attach is distinct from init, otherwise eqivalent. **/
/* USB_DETECT_BY_DRV - enable bus reset detection only
* else fully enable driver */
void usb_drv_init(void)
{
_usb_drv_init(false);
}
#ifdef USB_DETECT_BY_DRV
/* fully enable driver */
void usb_drv_attach(void)
{
sleep(HZ/10);
_usb_drv_init(true);
}
#endif /* USB_DETECT_BY_DRV */
void usb_drv_exit(void)
{
/* disable interrupts */
REG_USBINTR = 0;
/* stop usb controller */
REG_USBCMD &= ~USBCMD_RUN;
usb_drv_stop();
/* TODO : is one of these needed to save power ?
REG_PORTSC1 |= PORTSCX_PHY_LOW_POWER_SPD;
REG_USBCMD |= USBCMD_CTRL_RESET;
*/
#if CONFIG_CPU == IMX31L
avic_disable_int(USB_OTG);
#else
CPU_INT_DIS = USB_MASK;
#endif
cancel_cpu_boost();
usb_drv_int_enable(false);
}
#if CONFIG_CPU == IMX31L
static void __attribute__((interrupt("IRQ"))) USB_OTG_HANDLER(void)
#else
void usb_drv_int(void)
#endif
{
unsigned int status = REG_USBSTS;
unsigned int usbintr = REG_USBINTR; /* Only watch enabled ints */
unsigned int status = REG_USBSTS & usbintr;
#if 0
if (status & USBSTS_INT) logf("int: usb ioc");
if (status & USBSTS_ERR) logf("int: usb err");
if (status & USBSTS_PORT_CHANGE) logf("int: portchange");
if (status & USBSTS_RESET) logf("int: reset");
if (status & USBSTS_SYS_ERR) logf("int: syserr");
#endif
/* usb transaction interrupt */
@ -523,8 +512,18 @@ void usb_drv_int(void)
/* reset interrupt */
if (status & USBSTS_RESET) {
REG_USBSTS = USBSTS_RESET;
bus_reset();
usb_core_bus_reset(); /* tell mom */
#ifdef USB_DETECT_BY_DRV
if (UNLIKELY(usbintr == USBINTR_RESET_EN)) {
/* USB detected - detach and inform */
usb_drv_stop();
usb_drv_usb_detect_event();
}
else
#endif
{
bus_reset();
usb_core_bus_reset(); /* tell mom */
}
}
/* port change */
@ -588,7 +587,14 @@ int usb_drv_port_speed(void)
bool usb_drv_connected(void)
{
return ((REG_PORTSC1 & PORTSCX_CURRENT_CONNECT_STATUS) !=0);
return (REG_PORTSC1 &
(PORTSCX_PORT_SUSPEND | PORTSCX_CURRENT_CONNECT_STATUS))
== PORTSCX_CURRENT_CONNECT_STATUS;
}
bool usb_drv_powered(void)
{
return (REG_OTGSC & OTGSC_B_SESSION_VALID) ? true : false;
}
void usb_drv_set_address(int address)
@ -628,10 +634,7 @@ void usb_drv_set_test_mode(int mode)
REG_PORTSC1 |= PORTSCX_PTC_FORCE_EN;
break;
}
REG_USBCMD &= ~USBCMD_RUN;
sleep(HZ/20);
REG_USBCMD |= USBCMD_CTRL_RESET;
while (REG_USBCMD & USBCMD_CTRL_RESET);
usb_drv_reset();
REG_USBCMD |= USBCMD_RUN;
}
@ -735,7 +738,7 @@ void usb_drv_cancel_all_transfers(void)
while (REG_ENDPTFLUSH);
memset(td_array, 0, sizeof td_array);
for(i=0;i<NUM_ENDPOINTS*2;i++) {
for(i=0;i<USB_NUM_ENDPOINTS*2;i++) {
if(qh_array[i].wait) {
qh_array[i].wait=0;
qh_array[i].status=DTD_STATUS_HALTED;
@ -750,7 +753,7 @@ int usb_drv_request_endpoint(int dir)
bit=(dir & USB_DIR_IN)? 2:1;
for (i=1; i < NUM_ENDPOINTS; i++) {
for (i=1; i < USB_NUM_ENDPOINTS; i++) {
if((ep_allocation[i] & bit)!=0)
continue;
ep_allocation[i] |= bit;
@ -819,7 +822,7 @@ static void transfer_completed(void)
unsigned int mask = REG_ENDPTCOMPLETE;
REG_ENDPTCOMPLETE = mask;
for (ep=0; ep<NUM_ENDPOINTS; ep++) {
for (ep=0; ep<USB_NUM_ENDPOINTS; ep++) {
int dir;
for (dir=0; dir<2; dir++) {
int pipe = ep * 2 + dir;
@ -869,13 +872,8 @@ static void bus_reset(void)
logf("usb: double reset");
return;
}
#if CONFIG_CPU == IMX31L
int x;
for (x = 0; x < 30000; x++)
asm volatile ("");
#else
udelay(100);
#endif
}
if (REG_ENDPTPRIME) {
logf("usb: short reset timeout");
@ -917,7 +915,7 @@ static void init_bulk_queue_heads(void)
/* TODO: this should take ep_allocation into account */
/*** bulk ***/
for(i=1;i<NUM_ENDPOINTS;i++) {
for(i=1;i<USB_NUM_ENDPOINTS;i++) {
qh_array[i*2].max_pkt_length = rx_packetsize << QH_MAX_PKT_LEN_POS | QH_ZLT_SEL;
qh_array[i*2].dtd.next_td_ptr = QH_NEXT_TERMINATE;
qh_array[i*2+1].max_pkt_length = tx_packetsize << QH_MAX_PKT_LEN_POS | QH_ZLT_SEL;
@ -930,7 +928,7 @@ static void init_endpoints(void)
int i;
/* TODO: this should take ep_allocation into account */
/* bulk */
for(i=1;i<NUM_ENDPOINTS;i++) {
for(i=1;i<USB_NUM_ENDPOINTS;i++) {
REG_ENDPTCTRL(i) =
EPCTRL_RX_DATA_TOGGLE_RST | EPCTRL_RX_ENABLE |
EPCTRL_TX_DATA_TOGGLE_RST | EPCTRL_TX_ENABLE |

49
firmware/target/arm/usb-fw-pp502x.c
View File

@ -25,13 +25,13 @@
****************************************************************************/
#include "config.h"
#include "system.h"
#include "usb-target.h"
#include "usb.h"
#include "button.h"
#include "ata.h"
#include "string.h"
#include "usb_core.h"
#include "usb_drv.h"
#include "usb-target.h"
void usb_init_device(void)
{
@ -94,6 +94,31 @@ void usb_enable(bool on)
}
}
void usb_attach(void)
{
#ifdef USB_DETECT_BY_DRV
usb_drv_attach();
#else
usb_enable(true);
#endif
}
#ifdef USB_DETECT_BY_DRV
/* Cannot tell charger pin from USB pin */
static int usb_status = USB_EXTRACTED;
void usb_connect_event(bool inserted)
{
usb_status = inserted ? USB_INSERTED : USB_EXTRACTED;
usb_status_event(inserted ? USB_POWERED : USB_UNPOWERED);
}
/* Called during the bus reset interrupt when in detect mode */
void usb_drv_usb_detect_event(void)
{
usb_status_event(USB_INSERTED);
}
#else /* !USB_DETECT_BY_DRV */
static bool usb_pin_detect(void)
{
bool retval = false;
@ -110,12 +135,12 @@ static bool usb_pin_detect(void)
retval = true;
#elif defined(SANSA_C200)
/* GPIO H bit 1 is usb detect */
/* GPIO H bit 1 is usb/charger detect */
if (GPIOH_INPUT_VAL & 0x02)
retval = true;
#elif defined(SANSA_E200)
/* GPIO B bit 4 is usb detect */
/* GPIO B bit 4 is usb/charger detect */
if (GPIOB_INPUT_VAL & 0x10)
retval = true;
@ -137,16 +162,32 @@ static bool usb_pin_detect(void)
return retval;
}
#endif /* USB_DETECT_BY_DRV */
/* detect host or charger (INSERTED or POWERED) */
void usb_drv_int_enable(bool enable)
{
/* enable/disable USB IRQ in CPU */
if(enable) {
CPU_INT_EN = USB_MASK;
}
else {
CPU_INT_DIS = USB_MASK;
}
}
/* detect host or charger (INSERTED or EXTRACTED) */
int usb_detect(void)
{
#ifdef USB_DETECT_BY_DRV
return usb_status;
#else
if(usb_pin_detect()) {
return USB_INSERTED;
}
else {
return USB_EXTRACTED;
}
#endif
}
#if defined(IPOD_COLOR) || defined(IPOD_4G) \

7
firmware/target/arm/usb-target.h
View File

@ -23,4 +23,11 @@
void usb_init_device(void);
#ifndef BOOTLOADER
#if defined(SANSA_C200) || defined(SANSA_E200)
#define USB_STATUS_BY_EVENT /* No USB tick */
void usb_connect_event(bool inserted);
#endif
#endif /* BOOTLOADER */
#endif

65
firmware/usb.c
View File

@ -34,11 +34,11 @@
#include "disk.h"
#include "panic.h"
#include "lcd.h"
#include "usb-target.h"
#include "usb.h"
#include "button.h"
#include "sprintf.h"
#include "string.h"
#include "usb-target.h"
#ifdef HAVE_USBSTACK
#include "usb_core.h"
#endif
@ -129,11 +129,13 @@ static inline void usb_slave_mode(bool on)
#ifdef HAVE_PRIORITY_SCHEDULING
thread_set_priority(THREAD_ID_CURRENT, PRIORITY_REALTIME);
#endif
usb_enable(true);
usb_attach();
}
else /* usb_state == USB_INSERTED (only!) */
{
#ifndef USB_DETECT_BY_DRV
usb_enable(false);
#endif
#ifdef HAVE_PRIORITY_SCHEDULING
thread_set_priority(THREAD_ID_CURRENT, PRIORITY_SYSTEM);
#endif
@ -234,6 +236,26 @@ static void usb_thread(void)
(struct usb_transfer_completion_event_data*)ev.data);
break;
#endif
#ifdef USB_DETECT_BY_DRV
/* In this case, these events the handle cable insertion USB
* driver determines INSERTED/EXTRACTED state. */
case USB_POWERED:
/* Set the state to USB_POWERED for now and enable the driver
* to detect a bus reset only. If a bus reset is detected,
* USB_INSERTED will be received. */
usb_state = USB_POWERED;
usb_enable(true);
break;
case USB_UNPOWERED:
usb_enable(false);
/* This part shouldn't be obligatory for anything that can
* reliably detect removal of the data lines. USB_EXTRACTED
* could be posted on that event while bus power remains
* available. */
queue_post(&usb_queue, USB_EXTRACTED, 0);
break;
#endif /* USB_DETECT_BY_DRV */
case USB_INSERTED:
#ifdef HAVE_LCD_BITMAP
if(do_screendump_instead_of_usb)
@ -244,14 +266,14 @@ static void usb_thread(void)
}
#endif
#ifdef HAVE_USB_POWER
if (usb_power_button())
if(usb_power_button())
{
/* Only charging is desired */
usb_state = USB_POWERED;
#ifdef HAVE_USBSTACK
usb_core_enable_driver(USB_DRIVER_MASS_STORAGE, false);
usb_core_enable_driver(USB_DRIVER_CHARGING_ONLY, true);
usb_enable(true);
usb_attach();
#endif
break;
}
@ -272,7 +294,7 @@ static void usb_thread(void)
if(!exclusive_storage_access)
{
usb_enable(true);
usb_attach();
break;
}
#endif /* HAVE_USBSTACK */
@ -304,7 +326,7 @@ static void usb_thread(void)
usb_state = USB_EXTRACTED;
break; /* Connected for screendump only */
}
#endif /* HAVE_LCD_BITMAP */
#endif
#ifndef HAVE_USBSTACK /* Stack must undo this if POWERED state was transitional */
#ifdef HAVE_USB_POWER
if(usb_state == USB_POWERED)
@ -312,7 +334,7 @@ static void usb_thread(void)
usb_state = USB_EXTRACTED;
break;
}
#endif /* HAVE_USB_POWER */
#endif
#endif /* HAVE_USBSTACK */
if(usb_state == USB_INSERTED)
{
@ -324,9 +346,11 @@ static void usb_thread(void)
usb_state = USB_EXTRACTED;
#ifdef HAVE_USBSTACK
if (!exclusive_storage_access)
if(!exclusive_storage_access)
{
#ifndef USB_DETECT_BY_DRV /* Disabled handling USB_UNPOWERED */
usb_enable(false);
#endif
break;
}
@ -392,19 +416,34 @@ static void usb_thread(void)
#ifdef USB_STATUS_BY_EVENT
void usb_status_event(int current_status)
{
/* Status should be USB_INSERTED or USB_EXTRACTED.
/* Status should be USB_POWERED, USB_UNPOWERED, USB_INSERTED or
* USB_EXTRACTED.
* Caller isn't expected to filter for changes in status. */
if (usb_monitor_enabled && last_usb_status != current_status)
if(usb_monitor_enabled)
{
last_usb_status = current_status;
queue_post(&usb_queue, current_status, 0);
int oldstatus = disable_irq_save(); /* Dual-use function */
if(last_usb_status != current_status)
{
last_usb_status = current_status;
queue_post(&usb_queue, current_status, 0);
}
restore_irq(oldstatus);
}
}
void usb_start_monitoring(void)
{
int status = usb_detect();
#ifdef USB_DETECT_BY_DRV
/* USB detection begins by USB_POWERED, not USB_INSERTED. If it is
* USB_EXTRACTED, then nothing changes and post will be skipped. */
if(USB_INSERTED == status)
status = USB_POWERED;
#endif
usb_monitor_enabled = true;
usb_status_event(usb_detect());
usb_status_event(status);
}
#else /* !USB_STATUS_BY_EVENT */
static void usb_tick(void)

6
firmware/usbstack/usb_core.c
View File

@ -175,7 +175,7 @@ static struct
completion_handler_t completion_handler[2];
control_handler_t control_handler[2];
struct usb_transfer_completion_event_data completion_event;
} ep_data[NUM_ENDPOINTS];
} ep_data[USB_NUM_ENDPOINTS];
static struct usb_class_driver drivers[USB_NUM_DRIVERS] =
{
@ -240,7 +240,7 @@ static struct usb_class_driver drivers[USB_NUM_DRIVERS] =
static void usb_core_control_request_handler(struct usb_ctrlrequest* req);
static unsigned char response_data[256] USBDEVBSS_ATTR;
static unsigned char response_data[256] USB_DEVBSS_ATTR;
static short hex[16] = {'0','1','2','3','4','5','6','7',
@ -476,7 +476,7 @@ static void allocate_interfaces_and_endpoints(void)
memset(ep_data,0,sizeof(ep_data));
for (i = 0; i < NUM_ENDPOINTS; i++) {
for (i = 0; i < USB_NUM_ENDPOINTS; i++) {
usb_drv_release_endpoint(i | USB_DIR_OUT);
usb_drv_release_endpoint(i | USB_DIR_IN);
}

2
firmware/usbstack/usb_storage.c
View File

@ -401,7 +401,7 @@ void usb_storage_init_connection(void)
#if CONFIG_CPU == IMX31L || CONFIG_USBOTG == USBOTG_ISP1583 || \
defined(CPU_TCC77X) || defined(CPU_TCC780X)
static unsigned char _transfer_buffer[BUFFER_SIZE*2]
USBDEVBSS_ATTR __attribute__((aligned(32)));
USB_DEVBSS_ATTR __attribute__((aligned(32)));
tb.transfer_buffer = (void *)_transfer_buffer;
#else
/* TODO : check if bufsize is at least 32K ? */