nihilazo
/
rockbox
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Fix more tabs 

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24154 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Andree Buschmann 2010-01-03 10:27:43 +00:00
parent 56d972ad57
commit 64fb3e8df3
10 changed files with 176 additions and 176 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
firmware/export/as3525.h
View File

@ -295,7 +295,7 @@ interface */
#define UART_LNSTATUS_REG (*(volatile unsigned long*)(UART0_BASE + 0x14)) /* Line status register */
#define SD_MCI_POWER (*(volatile unsigned long*)(SD_MCI_BASE + 0x0))
#define SD_MCI_POWER (*(volatile unsigned long*)(SD_MCI_BASE + 0x0))
#define TIMER1_LOAD (*(volatile unsigned long*)(TIMER_BASE + 0x00)) /* 32-bit width */

2
firmware/export/config/ondavx767.h
View File

@ -159,7 +159,7 @@
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#define CONFIG_USBOTG USBOTG_JZ4740
#define CONFIG_USBOTG USBOTG_JZ4740
#define HAVE_USBSTACK
#define USE_ROCKBOX_USB
#define USB_VENDOR_ID 0x07C4

2
firmware/export/config/zenvisionm60gb.h
View File

@ -158,7 +158,7 @@
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
/* #define CONFIG_USBOTG USBOTG_ISP1761 */
/* #define CONFIG_USBOTG USBOTG_ISP1761 */
#define CONFIG_USBOTG USBOTG_ISP1583
#define HAVE_USBSTACK
#define USE_ROCKBOX_USB

38
firmware/export/i2c-coldfire.h
View File

@ -44,31 +44,31 @@ void i2c_adjust_prescale(int multiplier);
#define MAX_LOOP 0x100 /* TODO: select a better value */
/* PLLCR control */
#define QSPISEL (1 << 11) /* Selects QSPI or I2C interface */
#define QSPISEL (1 << 11) /* Selects QSPI or I2C interface */
/* Offsets to I2C registers from base address */
#define O_MADR 0x00 /* Slave Address */
#define O_MFDR 0x04 /* Frequency divider */
#define O_MBCR 0x08 /* Control register */
#define O_MBSR 0x0c /* Status register */
#define O_MBDR 0x10 /* Data register */
#define O_MADR 0x00 /* Slave Address */
#define O_MFDR 0x04 /* Frequency divider */
#define O_MBCR 0x08 /* Control register */
#define O_MBSR 0x0c /* Status register */
#define O_MBDR 0x10 /* Data register */
/* MBSR - Status register */
#define ICF (1 << 7) /* Transfer Complete */
#define IAAS (1 << 6) /* Addressed As Alave */
#define IBB (1 << 5) /* Bus Busy */
#define IAL (1 << 4) /* Arbitration Lost */
#define SRW (1 << 2) /* Slave R/W */
#define IIF (1 << 1) /* I2C Interrupt */
#define RXAK (1 << 0) /* No Ack bit */
#define ICF (1 << 7) /* Transfer Complete */
#define IAAS (1 << 6) /* Addressed As Alave */
#define IBB (1 << 5) /* Bus Busy */
#define IAL (1 << 4) /* Arbitration Lost */
#define SRW (1 << 2) /* Slave R/W */
#define IIF (1 << 1) /* I2C Interrupt */
#define RXAK (1 << 0) /* No Ack bit */
/* MBCR - Control register */
#define IEN (1 << 7) /* I2C Enable */
#define IIEN (1 << 6) /* Interrupt Enable */
#define MSTA (1 << 5) /* Master/Slave select */
#define MTX (1 << 4) /* Transmit/Receive */
#define TXAK (1 << 3) /* Transfer ACK */
#define RSTA (1 << 2) /* Restart.. */
#define IEN (1 << 7) /* I2C Enable */
#define IIEN (1 << 6) /* Interrupt Enable */
#define MSTA (1 << 5) /* Master/Slave select */
#define MTX (1 << 4) /* Transmit/Receive */
#define TXAK (1 << 3) /* Transfer ACK */
#define RSTA (1 << 2) /* Restart.. */
#endif

10
firmware/export/lcd.h
View File

@ -159,13 +159,13 @@ typedef unsigned char fb_data;
#if defined(HAVE_LCD_MODES)
void lcd_set_mode(int mode);
#define LCD_MODE_RGB565 0x00000001
#define LCD_MODE_YUV 0x00000002
#define LCD_MODE_PAL256 0x00000004
#define LCD_MODE_YUV 0x00000002
#define LCD_MODE_PAL256 0x00000004
#if HAVE_LCD_MODES & LCD_MODE_PAL256
void lcd_blit_pal256(unsigned char *src, int src_x, int src_y, int x, int y,
int width, int height);
void lcd_pal256_update_pal(fb_data *palette);
void lcd_blit_pal256(unsigned char *src, int src_x, int src_y, int x, int y,
int width, int height);
void lcd_pal256_update_pal(fb_data *palette);
#endif
#endif

44
firmware/export/mas.h
View File

@ -27,43 +27,43 @@
#define MAX_PEAK 0x8000
/*
MAS I2C defs
MAS I2C defs
*/
#if (CONFIG_CODEC == MAS3587F) || (CONFIG_CODEC == MAS3539F)
#define MAS_ADR 0x3c
#define MAS_DEV_WRITE (MAS_ADR | 0x00)
#define MAS_DEV_READ (MAS_ADR | 0x01)
#define MAS_DEV_WRITE (MAS_ADR | 0x00)
#define MAS_DEV_READ (MAS_ADR | 0x01)
#elif CONFIG_CODEC == MAS3507D
#define MAS_ADR 0x3a
#define MAS_DEV_WRITE (MAS_ADR | 0x00)
#define MAS_DEV_READ (MAS_ADR | 0x01)
#define MAS_DEV_WRITE (MAS_ADR | 0x00)
#define MAS_DEV_READ (MAS_ADR | 0x01)
#endif
/* registers..*/
#if (CONFIG_CODEC == MAS3587F) || (CONFIG_CODEC == MAS3539F)
#define MAS_DATA_WRITE 0x68
#define MAS_DATA_WRITE 0x68
#define MAS_DATA_READ 0x69
#define MAS_CODEC_WRITE 0x6c
#define MAS_CODEC_WRITE 0x6c
#define MAS_CODEC_READ 0x6d
#define MAS_CONTROL 0x6a
#define MAS_DCCF 0x76
#define MAS_DCFR 0x77
#define MAS_CONTROL 0x6a
#define MAS_DCCF 0x76
#define MAS_DCFR 0x77
#elif CONFIG_CODEC == MAS3507D
#define MAS_DATA_WRITE 0x68
#define MAS_DATA_WRITE 0x68
#define MAS_DATA_READ 0x69
#define MAS_CONTROL 0x6a
#define MAS_CONTROL 0x6a
#endif
/*
* MAS register
* MAS register
*/
#define MAS_REG_DCCF 0x8e
#define MAS_REG_MUTE 0xaa
#define MAS_REG_PIODATA 0xc8
#define MAS_REG_StartUpConfig 0xe6
#define MAS_REG_KPRESCALE 0xe7
#define MAS_REG_DCCF 0x8e
#define MAS_REG_MUTE 0xaa
#define MAS_REG_PIODATA 0xc8
#define MAS_REG_StartUpConfig 0xe6
#define MAS_REG_KPRESCALE 0xe7
#if (CONFIG_CODEC == MAS3587F) || (CONFIG_CODEC == MAS3539F)
#define MAS_REG_KMDB_SWITCH 0x21
#define MAS_REG_KMDB_STR 0x22
@ -77,12 +77,12 @@
#define MAS_REG_VOLUME_CONTROL 0x10
#define MAS_REG_BALANCE 0x11
#define MAS_REG_KAVC 0x12
#define MAS_REG_KBASS 0x14
#define MAS_REG_KTREBLE 0x15
#define MAS_REG_KBASS 0x14
#define MAS_REG_KTREBLE 0x15
#elif CONFIG_CODEC == MAS3507D
#define MAS_REG_KBASS 0x6b
#define MAS_REG_KTREBLE 0x6f
#define MAS_REG_KBASS 0x6b
#define MAS_REG_KTREBLE 0x6f
#endif
/*

230
firmware/export/storage.h
View File

@ -56,140 +56,140 @@ struct storage_info
* pointers, which doesn't work with argument-macros.
*/
#define storage_num_drives() NUM_DRIVES
#if (CONFIG_STORAGE & STORAGE_ATA)
#define storage_spindown ata_spindown
#define storage_sleep ata_sleep
#define storage_spin ata_spin
#if (CONFIG_STORAGE & STORAGE_ATA)
#define storage_spindown ata_spindown
#define storage_sleep ata_sleep
#define storage_spin ata_spin
#define storage_enable(on) ata_enable(on)
#define storage_sleepnow() ata_sleepnow()
#define storage_disk_is_active() ata_disk_is_active()
#define storage_soft_reset() ata_soft_reset()
#define storage_init() ata_init()
#define storage_close() ata_close()
#define storage_read_sectors(drive, start, count, buf) ata_read_sectors(IF_MD2(drive,) start, count, buf)
#define storage_write_sectors(drive, start, count, buf) ata_write_sectors(IF_MD2(drive,) start, count, buf)
#define storage_enable(on) ata_enable(on)
#define storage_sleepnow() ata_sleepnow()
#define storage_disk_is_active() ata_disk_is_active()
#define storage_soft_reset() ata_soft_reset()
#define storage_init() ata_init()
#define storage_close() ata_close()
#define storage_read_sectors(drive, start, count, buf) ata_read_sectors(IF_MD2(drive,) start, count, buf)
#define storage_write_sectors(drive, start, count, buf) ata_write_sectors(IF_MD2(drive,) start, count, buf)
#ifdef HAVE_STORAGE_FLUSH
#define storage_flush() (void)0
#endif
#define storage_last_disk_activity() ata_last_disk_activity()
#define storage_spinup_time() ata_spinup_time()
#define storage_get_identify() ata_get_identify()
#define storage_last_disk_activity() ata_last_disk_activity()
#define storage_spinup_time() ata_spinup_time()
#define storage_get_identify() ata_get_identify()
#ifdef STORAGE_GET_INFO
#define storage_get_info(drive, info) ata_get_info(IF_MD2(drive,) info)
#endif
#ifdef HAVE_HOTSWAP
#define storage_removable(drive) ata_removable(IF_MD(drive))
#define storage_present(drive) ata_present(IF_MD(drive))
#endif
#elif (CONFIG_STORAGE & STORAGE_SD)
#define storage_spindown sd_spindown
#define storage_sleep sd_sleep
#define storage_spin sd_spin
#ifdef STORAGE_GET_INFO
#define storage_get_info(drive, info) ata_get_info(IF_MD2(drive,) info)
#endif
#ifdef HAVE_HOTSWAP
#define storage_removable(drive) ata_removable(IF_MD(drive))
#define storage_present(drive) ata_present(IF_MD(drive))
#endif
#elif (CONFIG_STORAGE & STORAGE_SD)
#define storage_spindown sd_spindown
#define storage_sleep sd_sleep
#define storage_spin sd_spin
#define storage_enable(on) sd_enable(on)
#define storage_sleepnow() sd_sleepnow()
#define storage_disk_is_active() 0
#define storage_soft_reset() (void)0
#define storage_init() sd_init()
#define storage_read_sectors(drive, start, count, buf) sd_read_sectors(IF_MD2(drive,) start, count, buf)
#define storage_write_sectors(drive, start, count, buf) sd_write_sectors(IF_MD2(drive,) start, count, buf)
#define storage_enable(on) sd_enable(on)
#define storage_sleepnow() sd_sleepnow()
#define storage_disk_is_active() 0
#define storage_soft_reset() (void)0
#define storage_init() sd_init()
#define storage_read_sectors(drive, start, count, buf) sd_read_sectors(IF_MD2(drive,) start, count, buf)
#define storage_write_sectors(drive, start, count, buf) sd_write_sectors(IF_MD2(drive,) start, count, buf)
#ifdef HAVE_STORAGE_FLUSH
#define storage_flush() (void)0
#endif
#define storage_last_disk_activity() sd_last_disk_activity()
#define storage_spinup_time() 0
#define storage_get_identify() sd_get_identify()
#define storage_last_disk_activity() sd_last_disk_activity()
#define storage_spinup_time() 0
#define storage_get_identify() sd_get_identify()
#ifdef STORAGE_GET_INFO
#define storage_get_info(drive, info) sd_get_info(IF_MD2(drive,) info)
#endif
#ifdef HAVE_HOTSWAP
#define storage_removable(drive) sd_removable(IF_MD(drive))
#define storage_present(drive) sd_present(IF_MD(drive))
#endif
#elif (CONFIG_STORAGE & STORAGE_MMC)
#define storage_spindown mmc_spindown
#define storage_sleep mmc_sleep
#define storage_spin mmc_spin
#ifdef STORAGE_GET_INFO
#define storage_get_info(drive, info) sd_get_info(IF_MD2(drive,) info)
#endif
#ifdef HAVE_HOTSWAP
#define storage_removable(drive) sd_removable(IF_MD(drive))
#define storage_present(drive) sd_present(IF_MD(drive))
#endif
#elif (CONFIG_STORAGE & STORAGE_MMC)
#define storage_spindown mmc_spindown
#define storage_sleep mmc_sleep
#define storage_spin mmc_spin
#define storage_enable(on) mmc_enable(on)
#define storage_sleepnow() mmc_sleepnow()
#define storage_disk_is_active() mmc_disk_is_active()
#define storage_soft_reset() (void)0
#define storage_init() mmc_init()
#define storage_read_sectors(drive, start, count, buf) mmc_read_sectors(IF_MD2(drive,) start, count, buf)
#define storage_write_sectors(drive, start, count, buf) mmc_write_sectors(IF_MD2(drive,) start, count, buf)
#define storage_enable(on) mmc_enable(on)
#define storage_sleepnow() mmc_sleepnow()
#define storage_disk_is_active() mmc_disk_is_active()
#define storage_soft_reset() (void)0
#define storage_init() mmc_init()
#define storage_read_sectors(drive, start, count, buf) mmc_read_sectors(IF_MD2(drive,) start, count, buf)
#define storage_write_sectors(drive, start, count, buf) mmc_write_sectors(IF_MD2(drive,) start, count, buf)
#ifdef HAVE_STORAGE_FLUSH
#define storage_flush() (void)0
#endif
#define storage_last_disk_activity() mmc_last_disk_activity()
#define storage_spinup_time() 0
#define storage_get_identify() mmc_get_identify()
#ifdef STORAGE_GET_INFO
#define storage_get_info(drive, info) mmc_get_info(IF_MD2(drive,) info)
#endif
#ifdef HAVE_HOTSWAP
#define storage_removable(drive) mmc_removable(IF_MD(drive))
#define storage_present(drive) mmc_present(IF_MD(drive))
#endif
#elif (CONFIG_STORAGE & STORAGE_NAND)
#define storage_spindown nand_spindown
#define storage_sleep nand_sleep
#define storage_spin nand_spin
#define storage_enable(on) (void)0
#define storage_sleepnow() nand_sleepnow()
#define storage_disk_is_active() 0
#define storage_soft_reset() (void)0
#define storage_init() nand_init()
#define storage_read_sectors(drive, start, count, buf) nand_read_sectors(IF_MD2(drive,) start, count, buf)
#define storage_write_sectors(drive, start, count, buf) nand_write_sectors(IF_MD2(drive,) start, count, buf)
#ifdef HAVE_STORAGE_FLUSH
#define storage_flush() nand_flush()
#define storage_last_disk_activity() mmc_last_disk_activity()
#define storage_spinup_time() 0
#define storage_get_identify() mmc_get_identify()
#ifdef STORAGE_GET_INFO
#define storage_get_info(drive, info) mmc_get_info(IF_MD2(drive,) info)
#endif
#define storage_last_disk_activity() nand_last_disk_activity()
#define storage_spinup_time() 0
#define storage_get_identify() nand_get_identify()
#ifdef STORAGE_GET_INFO
#define storage_get_info(drive, info) nand_get_info(IF_MD2(drive,) info)
#endif
#ifdef HAVE_HOTSWAP
#define storage_removable(drive) nand_removable(IF_MD(drive))
#define storage_present(drive) nand_present(IF_MD(drive))
#endif
#elif (CONFIG_STORAGE & STORAGE_RAMDISK)
#define storage_spindown ramdisk_spindown
#define storage_sleep ramdisk_sleep
#define storage_spin ramdisk_spin
#ifdef HAVE_HOTSWAP
#define storage_removable(drive) mmc_removable(IF_MD(drive))
#define storage_present(drive) mmc_present(IF_MD(drive))
#endif
#elif (CONFIG_STORAGE & STORAGE_NAND)
#define storage_spindown nand_spindown
#define storage_sleep nand_sleep
#define storage_spin nand_spin
#define storage_enable(on) (void)0
#define storage_sleepnow() ramdisk_sleepnow()
#define storage_disk_is_active() 0
#define storage_soft_reset() (void)0
#define storage_init() ramdisk_init()
#define storage_read_sectors(drive, start, count, buf) ramdisk_read_sectors(IF_MD2(drive,) start, count, buf)
#define storage_write_sectors(drive, start, count, buf) ramdisk_write_sectors(IF_MD2(drive,) start, count, buf)
#define storage_enable(on) (void)0
#define storage_sleepnow() nand_sleepnow()
#define storage_disk_is_active() 0
#define storage_soft_reset() (void)0
#define storage_init() nand_init()
#define storage_read_sectors(drive, start, count, buf) nand_read_sectors(IF_MD2(drive,) start, count, buf)
#define storage_write_sectors(drive, start, count, buf) nand_write_sectors(IF_MD2(drive,) start, count, buf)
#ifdef HAVE_STORAGE_FLUSH
#define storage_flush() nand_flush()
#endif
#define storage_last_disk_activity() nand_last_disk_activity()
#define storage_spinup_time() 0
#define storage_get_identify() nand_get_identify()
#ifdef STORAGE_GET_INFO
#define storage_get_info(drive, info) nand_get_info(IF_MD2(drive,) info)
#endif
#ifdef HAVE_HOTSWAP
#define storage_removable(drive) nand_removable(IF_MD(drive))
#define storage_present(drive) nand_present(IF_MD(drive))
#endif
#elif (CONFIG_STORAGE & STORAGE_RAMDISK)
#define storage_spindown ramdisk_spindown
#define storage_sleep ramdisk_sleep
#define storage_spin ramdisk_spin
#define storage_enable(on) (void)0
#define storage_sleepnow() ramdisk_sleepnow()
#define storage_disk_is_active() 0
#define storage_soft_reset() (void)0
#define storage_init() ramdisk_init()
#define storage_read_sectors(drive, start, count, buf) ramdisk_read_sectors(IF_MD2(drive,) start, count, buf)
#define storage_write_sectors(drive, start, count, buf) ramdisk_write_sectors(IF_MD2(drive,) start, count, buf)
#ifdef HAVE_STORAGE_FLUSH
#define storage_flush() (void)0
#endif
#define storage_last_disk_activity() ramdisk_last_disk_activity()
#define storage_spinup_time() 0
#define storage_get_identify() ramdisk_get_identify()
#ifdef STORAGE_GET_INFO
#define storage_get_info(drive, info) ramdisk_get_info(IF_MD2(drive,) info)
#endif
#ifdef HAVE_HOTSWAP
#define storage_removable(drive) ramdisk_removable(IF_MD(drive))
#define storage_present(drive) ramdisk_present(IF_MD(drive))
#endif
#else
//#error No storage driver!
#endif
#define storage_last_disk_activity() ramdisk_last_disk_activity()
#define storage_spinup_time() 0
#define storage_get_identify() ramdisk_get_identify()
#ifdef STORAGE_GET_INFO
#define storage_get_info(drive, info) ramdisk_get_info(IF_MD2(drive,) info)
#endif
#ifdef HAVE_HOTSWAP
#define storage_removable(drive) ramdisk_removable(IF_MD(drive))
#define storage_present(drive) ramdisk_present(IF_MD(drive))
#endif
#else
//#error No storage driver!
#endif
#else /* NOT CONFIG_STORAGE_MULTI and NOT SIMULATOR*/
/* Simulator and multi-driver use normal functions */

2
firmware/export/uda1380.h
View File

@ -59,7 +59,7 @@ extern void audiohw_set_mixer_vol(int channel1, int channel2);
/* REG_I2S: I2S settings */
#define REG_I2S 0x01
#define REG_I2S 0x01
#define I2S_IFMT_IIS (0 << 8)
#define I2S_IFMT_LSB16 (1 << 8)
#define I2S_IFMT_LSB18 (2 << 8)

2
firmware/export/usb-tcc.h
View File

@ -112,5 +112,5 @@
#define TCC7xx_USB_EP_DMA_ADDR1 MMR_REG16(USB_BASE, 0xa0) /* EP DMA MCU addr1 register */
#define TCC7xx_USB_EP_DMA_ADDR2 MMR_REG16(USB_BASE, 0xa4) /* EP DMA MCU addr2 register */
#define TCC7xx_USB_EP_DMA_STAT MMR_REG16(USB_BASE, 0xc0) /* EP DMA Transfer Status register */
#define TCC7xx_USB_DELAY_CTRL MMR_REG16(USB_BASE, 0x80) /* Delay control register */
#define TCC7xx_USB_DELAY_CTRL MMR_REG16(USB_BASE, 0x80) /* Delay control register */
#endif /* USB_TCC7XX_H */

20
firmware/export/usb_ch9.h
View File

@ -115,17 +115,17 @@
* are at most sixteen features of each type.) Hubs may also support a
* new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend.
*/
#define USB_DEVICE_SELF_POWERED 0 /* (read only) */
#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */
#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */
#define USB_DEVICE_BATTERY 2 /* (wireless) */
#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */
#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/
#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */
#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */
#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */
#define USB_DEVICE_SELF_POWERED 0 /* (read only) */
#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */
#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */
#define USB_DEVICE_BATTERY 2 /* (wireless) */
#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */
#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/
#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */
#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */
#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */
#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */
#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */
/**