coldfire: Allow building when 88KHz audio is disabled

Change-Id: Ieeacf591ad4233428dca99c347043e61abae1d1f

firmware/drivers/audio/uda1380.c

@@ -227,11 +227,11 @@ void audiohw_set_frequency(int fsel)
             MIX_CTL_SEL_NS,
             WSPLL_25_50 | SYSCLK_256FS
         },
-        [HW_FREQ_88] =
+        HW_HAVE_88_([HW_FREQ_88] =
         {
             MIX_CTL_SEL_NS,
             WSPLL_50_100 | SYSCLK_256FS
-        },
+        },)
     };
 
     const unsigned short *ent;
@@ -243,6 +243,7 @@ void audiohw_set_frequency(int fsel)
 
 #ifdef USE_WSPLL
     /* Enable WSPLL if needed (for Iriver H100 and H300 series) */
+HW_HAVE_88_(
     if (fsel == HW_FREQ_88)
     {
       /* Only at this case we need use WSPLL on DAC part for Iriver H100 and H300 series, because Coldfire work
@@ -251,6 +252,7 @@ void audiohw_set_frequency(int fsel)
       if (!wspll_enable) wspll_on(true);
     }
     else
+)
     {
       /* At this case WSPLL clock and SYSCLK has same value and we don't use WSPLL to avoid WSPLL errors */
       if (wspll_enable) wspll_on(false);

firmware/target/coldfire/pcm-coldfire.c

@@ -77,7 +77,7 @@
 #if CONFIG_CPU == MCF5249 && defined(HAVE_UDA1380)
 static const unsigned char pcm_freq_parms[HW_NUM_FREQ][2] =
 {
-    [HW_FREQ_88] = { 0x0c, 0x01 },
+HW_HAVE_88_([HW_FREQ_88] = { 0x0c, 0x01 },)
     [HW_FREQ_44] = { 0x06, 0x01 },
     [HW_FREQ_22] = { 0x04, 0x02 },
     [HW_FREQ_11] = { 0x02, 0x02 },