FS#10436 - add the Sansa View to the build system. The bootloader builds but doesn't do anything useful yet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21848 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
parent
5f6998bde9
commit
eea149bd13
|
@ -1024,7 +1024,8 @@ static bool dbg_spdif(void)
|
|||
# define DEBUG_CANCEL BUTTON_MENU
|
||||
|
||||
#elif (CONFIG_KEYPAD == SANSA_E200_PAD) || \
|
||||
(CONFIG_KEYPAD == SANSA_C200_PAD)
|
||||
(CONFIG_KEYPAD == SANSA_C200_PAD) || \
|
||||
(CONFIG_KEYPAD == SANSA_FUZE_PAD)
|
||||
# define DEBUG_CANCEL BUTTON_LEFT
|
||||
|
||||
/* This is temporary until the SA9200 touchpad works */
|
||||
|
|
|
@ -11,7 +11,8 @@ gigabeat-s.c
|
|||
defined(SANSA_E200) || defined(SANSA_C200) || \
|
||||
defined(MROBE_100) || defined(PHILIPS_SA9200) || \
|
||||
defined(PHILIPS_HDD1630) || defined(SAMSUNG_YH820) || \
|
||||
defined(SAMSUNG_YH920) || defined(SAMSUNG_YH925)
|
||||
defined(SAMSUNG_YH920) || defined(SAMSUNG_YH925) || \
|
||||
defined(SANSA_VIEW)
|
||||
#ifdef E200R_INSTALLER
|
||||
main-e200r-installer.c
|
||||
#elif defined(C240_ERASE)
|
||||
|
|
|
@ -73,6 +73,9 @@ extern int show_logo(void);
|
|||
#elif CONFIG_KEYPAD == SAMSUNG_YH_PAD
|
||||
#define BOOTLOADER_BOOT_OF BUTTON_LEFT
|
||||
|
||||
#elif CONFIG_KEYPAD == SANSA_FUZE_PAD
|
||||
#define BOOTLOADER_BOOT_OF BUTTON_LEFT
|
||||
|
||||
#endif
|
||||
|
||||
/* Maximum allowed firmware image size. 10MB is more than enough */
|
||||
|
@ -447,7 +450,8 @@ void* main(void)
|
|||
int rc;
|
||||
int num_partitions;
|
||||
struct partinfo* pinfo;
|
||||
#if defined(SANSA_E200) || defined(SANSA_C200) || defined(PHILIPS_SA9200)
|
||||
#if defined(SANSA_E200) || defined(SANSA_C200) || defined(PHILIPS_SA9200) \
|
||||
|| defined (SANSA_VIEW)
|
||||
#if !defined(USE_ROCKBOX_USB)
|
||||
int usb_retry = 0;
|
||||
#endif
|
||||
|
|
|
@ -561,6 +561,25 @@ target/arm/sandisk/audio-c200_e200.c
|
|||
#endif /* SIMULATOR */
|
||||
#endif /* SANSA_C200 */
|
||||
|
||||
#ifdef SANSA_VIEW
|
||||
#ifndef SIMULATOR
|
||||
/* target/arm/ascodec-pp.c */
|
||||
target/arm/ata-sd-pp.c
|
||||
target/arm/lcd-as-memframe.S
|
||||
target/arm/i2s-pp.c
|
||||
/* target/arm/usb-fw-pp502x.c */
|
||||
target/arm/sandisk/sansa-view/backlight-view.c
|
||||
target/arm/sandisk/sansa-view/adc-view.c
|
||||
target/arm/sandisk/sansa-view/power-view.c
|
||||
target/arm/sandisk/sansa-view/lcd-view.c
|
||||
target/arm/sandisk/sansa-view/button-view.c
|
||||
target/arm/sandisk/sansa-view/powermgmt-view.c
|
||||
#ifndef BOOTLOADER
|
||||
/* target/arm/sandisk/audio-view.c */
|
||||
#endif /* BOOTLOADER */
|
||||
#endif /* SIMULATOR */
|
||||
#endif /* SANSA_VIEW */
|
||||
|
||||
#ifdef PHILIPS_SA9200
|
||||
#ifndef SIMULATOR
|
||||
#ifndef BOOTLOADER
|
||||
|
|
|
@ -0,0 +1,207 @@
|
|||
/*
|
||||
* This config file is for the Sandisk Sansa View
|
||||
*/
|
||||
#define TARGET_TREE /* this target is using the target tree system */
|
||||
|
||||
/* For Rolo and boot loader */
|
||||
#define MODEL_NUMBER 63
|
||||
#define MODEL_NAME "Sandisk View"
|
||||
|
||||
#define HW_SAMPR_CAPS (SAMPR_CAP_44)
|
||||
|
||||
/* define this if you have recording possibility */
|
||||
/* #define HAVE_RECORDING */
|
||||
|
||||
#define REC_SAMPR_CAPS (SAMPR_CAP_22)
|
||||
#define REC_FREQ_DEFAULT REC_FREQ_22 /* Default is not 44.1kHz */
|
||||
#define REC_SAMPR_DEFAULT SAMPR_22
|
||||
|
||||
/* Define bitmask of input sources - recordable bitmask can be defined
|
||||
explicitly if different */
|
||||
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
|
||||
|
||||
/* define this if you have a bitmap LCD display */
|
||||
#define HAVE_LCD_BITMAP
|
||||
|
||||
/* define this if you have a colour LCD */
|
||||
#define HAVE_LCD_COLOR
|
||||
|
||||
/* define this if you want album art for this target */
|
||||
#define HAVE_ALBUMART
|
||||
|
||||
/* define this to enable bitmap scaling */
|
||||
#define HAVE_BMP_SCALING
|
||||
|
||||
/* define this to enable JPEG decoding */
|
||||
#define HAVE_JPEG
|
||||
|
||||
/* define this if you have a light associated with the buttons */
|
||||
#define HAVE_BUTTON_LIGHT
|
||||
|
||||
/* define this if you have access to the quickscreen */
|
||||
#define HAVE_QUICKSCREEN
|
||||
|
||||
/* define this if you have access to the pitchscreen */
|
||||
#define HAVE_PITCHSCREEN
|
||||
|
||||
/* define this if you would like tagcache to build on this target */
|
||||
#define HAVE_TAGCACHE
|
||||
|
||||
/* LCD dimensions */
|
||||
#define LCD_WIDTH 240
|
||||
#define LCD_HEIGHT 320
|
||||
#define LCD_DEPTH 16 /* 65536 colours */
|
||||
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
|
||||
|
||||
#ifndef BOOTLOADER
|
||||
/* define this if you have LCD enable function */
|
||||
/* #define HAVE_LCD_ENABLE */
|
||||
|
||||
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
|
||||
should be defined as well. */
|
||||
/* #define HAVE_LCD_SLEEP */
|
||||
/* #define HAVE_LCD_SLEEP_SETTING */
|
||||
#endif
|
||||
|
||||
/* define this if you can flip your LCD */
|
||||
#define HAVE_LCD_FLIP
|
||||
|
||||
/* define this if you can invert the colours on your LCD */
|
||||
#define HAVE_LCD_INVERT
|
||||
|
||||
/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
|
||||
|
||||
/* The only difference is that the power/hold is on the left instead of right on Fuze */
|
||||
#define CONFIG_KEYPAD SANSA_FUZE_PAD
|
||||
|
||||
/* Define this if you do software codec */
|
||||
#define CONFIG_CODEC SWCODEC
|
||||
/* There is no hardware tone control */
|
||||
#define HAVE_SW_TONE_CONTROLS
|
||||
|
||||
/* define this if you have a real-time clock */
|
||||
#ifndef BOOTLOADER
|
||||
/* #define CONFIG_RTC RTC_ */
|
||||
#endif
|
||||
|
||||
/* Define this if you have a software controlled poweroff */
|
||||
#define HAVE_SW_POWEROFF
|
||||
|
||||
/* Required for MicroSD cards */
|
||||
#define HAVE_FAT16SUPPORT
|
||||
|
||||
/* The number of bytes reserved for loadable codecs */
|
||||
#define CODEC_SIZE 0x100000
|
||||
|
||||
/* The number of bytes reserved for loadable plugins */
|
||||
#define PLUGIN_BUFFER_SIZE 0x80000
|
||||
|
||||
#define AB_REPEAT_ENABLE 1
|
||||
|
||||
/* Define this for LCD backlight available */
|
||||
#define HAVE_BACKLIGHT
|
||||
/* #define HAVE_BACKLIGHT_BRIGHTNESS */
|
||||
|
||||
/* define this if the unit uses a scrollwheel for navigation */
|
||||
#define HAVE_SCROLLWHEEL
|
||||
/* define to activate advanced wheel acceleration code */
|
||||
#define HAVE_WHEEL_ACCELERATION
|
||||
/* define from which rotation speed [degree/sec] on the acceleration starts */
|
||||
#define WHEEL_ACCEL_START 540
|
||||
/* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
|
||||
#define WHEEL_ACCELERATION 1
|
||||
|
||||
/* define this if you have a flash memory storage */
|
||||
#define HAVE_FLASH_STORAGE
|
||||
|
||||
/* define this if the flash memory uses the SecureDigital Memory Card protocol */
|
||||
#define CONFIG_STORAGE STORAGE_SD
|
||||
|
||||
#define BATTERY_CAPACITY_DEFAULT 750 /* default battery capacity */
|
||||
#define BATTERY_CAPACITY_MIN 750 /* min. capacity selectable */
|
||||
#define BATTERY_CAPACITY_MAX 750 /* max. capacity selectable */
|
||||
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
|
||||
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
||||
|
||||
/* Charging implemented in a target-specific algorithm */
|
||||
#define CONFIG_CHARGING CHARGING_SIMPLE
|
||||
#define HAVE_POWEROFF_WHILE_CHARGING
|
||||
|
||||
/* define current usage levels */
|
||||
#define CURRENT_NORMAL 30 /* Toni's measurements in Nov 2008 */
|
||||
#define CURRENT_BACKLIGHT 40 /* Screen is about 20, blue LEDs are another 20, so 40 if both */
|
||||
#define CURRENT_RECORD 30 /* flash player, so this is just unboosted current*/
|
||||
|
||||
/* define this if the unit can be powered or charged via USB */
|
||||
#define HAVE_USB_POWER
|
||||
|
||||
/** Non-simulator section **/
|
||||
#ifndef SIMULATOR
|
||||
|
||||
/* Define this if you have a PortalPlayer PP5024 */
|
||||
#define CONFIG_CPU PP6100
|
||||
|
||||
/* Define this if you want to use the PP5024 i2c interface */
|
||||
#define CONFIG_I2C I2C_PP5024
|
||||
|
||||
/* define this if the hardware can be powered off while charging */
|
||||
/* Sansa can't be powered off while charging */
|
||||
/* #define HAVE_POWEROFF_WHILE_CHARGING */
|
||||
|
||||
/* The start address index for ROM builds */
|
||||
#define ROM_START 0x00000000
|
||||
|
||||
/* Define this to the CPU frequency */
|
||||
#define CPU_FREQ 250000000
|
||||
|
||||
/* Type of LCD TODO: hopefully the same as the x5 but check this*/
|
||||
#define CONFIG_LCD LCD_VIEW
|
||||
|
||||
/* Offset ( in the firmware file's header ) to the file CRC and data. These are
|
||||
only used when loading the old format rockbox.e200 file
|
||||
Required for bootloader/common.c to compile */
|
||||
#define FIRMWARE_OFFSET_FILE_CRC 0x0
|
||||
#define FIRMWARE_OFFSET_FILE_DATA 0x8
|
||||
|
||||
#ifndef BOOTLOADER
|
||||
#define HAVE_MULTIVOLUME
|
||||
#define HAVE_HOTSWAP
|
||||
#endif
|
||||
|
||||
/* USB On-the-go */
|
||||
/* #define CONFIG_USBOTG USBOTG_ARC */
|
||||
|
||||
/* enable these for the experimental usb stack */
|
||||
#define HAVE_USBSTACK
|
||||
#define USE_ROCKBOX_USB
|
||||
#define USB_VENDOR_ID 0x0781
|
||||
#define USB_PRODUCT_ID 0x74b1
|
||||
|
||||
/* Virtual LED (icon) */
|
||||
#define CONFIG_LED LED_VIRTUAL
|
||||
|
||||
/* Define this if you have adjustable CPU frequency */
|
||||
/* #define HAVE_ADJUSTABLE_CPU_FREQ */
|
||||
|
||||
#define MI4_FORMAT
|
||||
#define BOOTFILE_EXT "mi4"
|
||||
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
||||
#define BOOTDIR "/.rockbox"
|
||||
|
||||
#define ICODE_ATTR_TREMOR_NOT_MDCT
|
||||
|
||||
#define INCLUDE_TIMEOUT_API
|
||||
|
||||
#endif /* SIMULATOR */
|
||||
|
||||
/** Port-specific settings **/
|
||||
|
||||
/* Main LCD backlight brightness range and defaults */
|
||||
#define MIN_BRIGHTNESS_SETTING 1
|
||||
#define MAX_BRIGHTNESS_SETTING 12
|
||||
#define DEFAULT_BRIGHTNESS_SETTING 6
|
||||
|
||||
/* Default recording levels */
|
||||
#define DEFAULT_REC_MIC_GAIN 23
|
||||
#define DEFAULT_REC_LEFT_GAIN 23
|
||||
#define DEFAULT_REC_RIGHT_GAIN 23
|
|
@ -57,6 +57,7 @@
|
|||
#define PP5020 5020
|
||||
#define PP5022 5022
|
||||
#define PP5024 5024
|
||||
#define PP6100 6100
|
||||
#define PNX0101 101
|
||||
#define S3C2440 2440
|
||||
#define DSC25 25
|
||||
|
@ -188,7 +189,8 @@
|
|||
#define LCD_FUZE 32 /* as used by the Sansa Fuze */
|
||||
#define LCD_LYRE_PROTO1 33 /* as used by the Lyre */
|
||||
#define LCD_YH925 34 /* as used by Samsung YH-925 (similar to the H10 20GB) */
|
||||
|
||||
#define LCD_VIEW 35 /* as used by the Sansa View */
|
||||
|
||||
/* LCD_PIXELFORMAT */
|
||||
#define HORIZONTAL_PACKING 1
|
||||
#define VERTICAL_PACKING 2
|
||||
|
@ -368,6 +370,8 @@ Lyre prototype 1*/
|
|||
#include "config-fuze.h"
|
||||
#elif defined(SANSA_C200V2)
|
||||
#include "config-c200v2.h"
|
||||
#elif defined(SANSA_VIEW)
|
||||
#include "config-view.h"
|
||||
#elif defined(LYRE_PROTO1)
|
||||
#include "config-lyre_proto1.h"
|
||||
#elif defined(SAMSUNG_YH820)
|
||||
|
@ -576,7 +580,8 @@ Lyre prototype 1*/
|
|||
/* define for all cpus from PP family */
|
||||
#if (CONFIG_CPU == PP5002)
|
||||
#define CPU_PP
|
||||
#elif (CONFIG_CPU == PP5020) || (CONFIG_CPU == PP5022) || (CONFIG_CPU == PP5024)
|
||||
#elif (CONFIG_CPU == PP5020) || (CONFIG_CPU == PP5022) \
|
||||
|| (CONFIG_CPU == PP5024) || (CONFIG_CPU == PP6100)
|
||||
#define CPU_PP
|
||||
#define CPU_PP502x
|
||||
#endif
|
||||
|
@ -682,7 +687,7 @@ Lyre prototype 1*/
|
|||
|
||||
/* Change this if you want to build a single-core firmware for a multicore
|
||||
* target for debugging */
|
||||
#if defined(BOOTLOADER)
|
||||
#if defined(BOOTLOADER) || (CONFIG_CPU == PP6100)
|
||||
#define FORCE_SINGLE_CORE
|
||||
#endif
|
||||
|
||||
|
|
|
@ -38,6 +38,9 @@
|
|||
#if CONFIG_CPU == PP5024
|
||||
#include "pp5024.h"
|
||||
#endif
|
||||
#if CONFIG_CPU == PP6100
|
||||
#include "pp6100.h"
|
||||
#endif
|
||||
#if CONFIG_CPU == PNX0101
|
||||
#include "pnx0101.h"
|
||||
#endif
|
||||
|
|
|
@ -0,0 +1,31 @@
|
|||
#ifndef __PP6100_H__
|
||||
#define __PP6100_H__
|
||||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2009 by Robert Keevil
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* We believe this is quite similar to the 5020 and for now we just use that
|
||||
completely and redefine any minor differences */
|
||||
#include "pp5020.h"
|
||||
|
||||
#undef DRAM_START
|
||||
#define DRAM_START 0x10f00000
|
||||
|
||||
#endif
|
|
@ -7,7 +7,12 @@ STARTUP(target/arm/crt0-pp-bl.o)
|
|||
|
||||
#define DRAMSIZE (MEMORYSIZE * 0x100000)
|
||||
|
||||
#ifdef SANSA_VIEW
|
||||
#define DRAMORIG 0x10f00000
|
||||
#else
|
||||
#define DRAMORIG 0x10000000
|
||||
#endif
|
||||
|
||||
#ifndef IRAMORIG
|
||||
#define IRAMORIG 0x40000000
|
||||
#endif
|
||||
|
|
|
@ -0,0 +1,33 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2009 by Robert Keevil
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#include "adc-target.h"
|
||||
|
||||
void adc_init(void)
|
||||
{
|
||||
}
|
||||
|
||||
/* Called to get the recent ADC reading */
|
||||
inline unsigned short adc_read(int channel)
|
||||
{
|
||||
(void)channel;
|
||||
return 0;
|
||||
}
|
|
@ -0,0 +1,34 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2009 by Robert Keevil
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifndef BACKLIGHT_TARGET_H
|
||||
#define BACKLIGHT_TARGET_H
|
||||
|
||||
#include <stdbool.h>
|
||||
|
||||
#define _backlight_init() true
|
||||
void _backlight_on(void);
|
||||
void _backlight_off(void);
|
||||
|
||||
void _buttonlight_on(void);
|
||||
void _buttonlight_off(void);
|
||||
|
||||
#endif
|
|
@ -0,0 +1,50 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2009 by Robert Keevil
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#include "config.h"
|
||||
#include "backlight-target.h"
|
||||
#include "system.h"
|
||||
#include "lcd.h"
|
||||
#include "backlight.h"
|
||||
|
||||
void _backlight_set_brightness(int brightness)
|
||||
{
|
||||
(void)brightness;
|
||||
}
|
||||
|
||||
void _backlight_off(void)
|
||||
{
|
||||
GPIO_SET_BITWISE(GPIOD_ENABLE, 1<<8);
|
||||
}
|
||||
|
||||
void _backlight_on(void)
|
||||
{
|
||||
GPIO_SET_BITWISE(GPIOD_ENABLE, 1);
|
||||
}
|
||||
|
||||
void _buttonlight_on(void)
|
||||
{
|
||||
GPIO_CLEAR_BITWISE(GPIOA_ENABLE, 0x2);
|
||||
}
|
||||
|
||||
void _buttonlight_off(void)
|
||||
{
|
||||
GPIO_SET_BITWISE(GPIOA_ENABLE, 0x2);
|
||||
}
|
|
@ -0,0 +1,62 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2006 by Barry Wardell
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifndef _BUTTON_TARGET_H_
|
||||
#define _BUTTON_TARGET_H_
|
||||
|
||||
#include <stdbool.h>
|
||||
#include "config.h"
|
||||
|
||||
#define HAS_BUTTON_HOLD
|
||||
|
||||
void button_init_device(void);
|
||||
bool button_hold(void);
|
||||
int button_read_device(void);
|
||||
/* Sandisk Sansa View button codes */
|
||||
|
||||
/* Main unit's buttons */
|
||||
#define BUTTON_HOME 0x00000001
|
||||
|
||||
#define BUTTON_DOWN 0x00000002
|
||||
#define BUTTON_RIGHT 0x00000004
|
||||
|
||||
#define BUTTON_LEFT 0x00000008
|
||||
#define BUTTON_SELECT 0x00000010
|
||||
#define BUTTON_UP 0x00000020
|
||||
#define BUTTON_POWER 0x00000040
|
||||
|
||||
#define BUTTON_SCROLL_BACK 0x00000080
|
||||
#define BUTTON_SCROLL_FWD 0x00000100
|
||||
|
||||
#define BUTTON_HOLD 0x00000400
|
||||
|
||||
#define BUTTON_MAIN (BUTTON_HOME|BUTTON_DOWN|BUTTON_RIGHT|BUTTON_LEFT \
|
||||
|BUTTON_SELECT|BUTTON_UP|BUTTON_POWER \
|
||||
|BUTTON_SCROLL_BACK|BUTTON_SCROLL_FWD \
|
||||
|BUTTON_HOLD)
|
||||
|
||||
/* No Remote control */
|
||||
#define BUTTON_REMOTE 0
|
||||
|
||||
#define POWEROFF_BUTTON BUTTON_POWER
|
||||
#define POWEROFF_COUNT 10
|
||||
|
||||
#endif /* _BUTTON_TARGET_H_ */
|
|
@ -0,0 +1,37 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2009 by Robert Keevil
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#include "button.h"
|
||||
|
||||
void button_init_device(void)
|
||||
{
|
||||
|
||||
}
|
||||
|
||||
bool button_hold(void)
|
||||
{
|
||||
return false;
|
||||
}
|
||||
|
||||
int button_read_device(void)
|
||||
{
|
||||
return 0;
|
||||
}
|
|
@ -0,0 +1,26 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2009 by Robert Keevil
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#include "i2c.h"
|
||||
|
||||
void i2c_init(void)
|
||||
{
|
||||
}
|
|
@ -0,0 +1,428 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Rockbox driver for Sansa View LCDs
|
||||
*
|
||||
* Copyright (c) 2009 Robert Keevil
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#include <string.h>
|
||||
#include "cpu.h"
|
||||
#include "system.h"
|
||||
#include "backlight-target.h"
|
||||
#include "lcd.h"
|
||||
|
||||
#include "bitmaps/rockboxlogo.h"
|
||||
|
||||
/* Power and display status */
|
||||
static bool power_on = false; /* Is the power turned on? */
|
||||
static bool display_on SHAREDBSS_ATTR = false; /* Is the display turned on? */
|
||||
static unsigned lcd_yuv_options SHAREDBSS_ATTR = 0;
|
||||
|
||||
#define LCD_DATA_OUT_GPIO GPIOH_OUTPUT_VAL
|
||||
#define LCD_DATA_OUT_PIN 4
|
||||
|
||||
#define LCD_CLOCK_GPIO GPIOH_OUTPUT_VAL
|
||||
#define LCD_CLOCK_PIN 6
|
||||
|
||||
#define LCD_CS_GPIO GPIOH_OUTPUT_VAL
|
||||
#define LCD_CS_PIN 7
|
||||
|
||||
#ifdef BOOTLOADER
|
||||
static void lcd_init_gpio(void)
|
||||
{
|
||||
// OF: 0x5CC8
|
||||
|
||||
outl(inl(0x70000010) | 0xFC000000, 0x70000010);
|
||||
outl(inl(0x70000014) | 0xC300000, 0x70000014);
|
||||
|
||||
GPIOE_ENABLE = 0;
|
||||
/* TODO: check GPIOM exists and isn't just atomic access */
|
||||
/* GPIOM_ENABLE &= ~0x3; */
|
||||
GPIOJ_ENABLE &= ~0x1a;
|
||||
GPIOB_ENABLE &= ~0x8;
|
||||
GPIOH_OUTPUT_VAL |= 0x80;
|
||||
GPIOH_OUTPUT_EN |= 0x80;
|
||||
GPIOH_ENABLE |= 0x80;
|
||||
GPIOH_OUTPUT_VAL |= 0x40;
|
||||
GPIOH_OUTPUT_EN |= 0x40;
|
||||
GPIOH_ENABLE |= 0x40;
|
||||
GPIOH_OUTPUT_VAL |= 0x20;
|
||||
GPIOH_OUTPUT_EN |= 0x20;
|
||||
GPIOH_ENABLE |= 0x20;
|
||||
GPIOH_OUTPUT_VAL |= 0x10;
|
||||
GPIOH_OUTPUT_EN |= 0x10;
|
||||
GPIOH_ENABLE |= 0x10;
|
||||
// GPIOD_OUTOUT_VAL &= ~0x1; //backlight on
|
||||
// GPIOD_ENABLE |= 0x1;
|
||||
GPIOB_OUTPUT_VAL |= 0x4;
|
||||
GPIOB_ENABLE |= 0x4;
|
||||
GPIOB_OUTPUT_EN |= 0x4;
|
||||
GPIOG_ENABLE |= 0x8;
|
||||
GPIOG_OUTPUT_EN &= ~0x8;
|
||||
|
||||
// more to add here...
|
||||
}
|
||||
#endif
|
||||
|
||||
static void lcd_send_msg(unsigned char count, unsigned int data)
|
||||
{
|
||||
// OF: 0x645C
|
||||
int i;
|
||||
|
||||
LCD_CLOCK_GPIO |= (1 << LCD_CLOCK_PIN);
|
||||
LCD_CS_GPIO &= ~(1 << LCD_CS_PIN);
|
||||
|
||||
for (i = count - 1; i >= 0; i--)
|
||||
{
|
||||
if (data & (1 << count))
|
||||
{
|
||||
// LCD_DATA_OUT_GPIO &= ~(1 << LCD_DATA_OUT_PIN);
|
||||
LCD_DATA_OUT_GPIO |= (1 << LCD_DATA_OUT_PIN);
|
||||
} else {
|
||||
// LCD_DATA_OUT_GPIO |= (1 << LCD_DATA_OUT_PIN);
|
||||
LCD_DATA_OUT_GPIO &= ~(1 << LCD_DATA_OUT_PIN);
|
||||
}
|
||||
LCD_CLOCK_GPIO &= ~(1 << LCD_CLOCK_PIN);
|
||||
udelay(1);
|
||||
LCD_CLOCK_GPIO |= (1 << LCD_CLOCK_PIN);
|
||||
udelay(2);
|
||||
}
|
||||
|
||||
LCD_CS_GPIO |= (1 << LCD_CS_PIN);
|
||||
LCD_CLOCK_GPIO |= (1 << LCD_CLOCK_PIN);
|
||||
udelay(1);
|
||||
}
|
||||
|
||||
/*
|
||||
static void lcd_write_reg(unsigned int reg, unsigned int data)
|
||||
{
|
||||
// OF: 0x6278 - referenced from 0x62840
|
||||
|
||||
// So far this function is always called with shift = 0x0 ?
|
||||
// If so can remove and simplify
|
||||
|
||||
unsigned int cmd;
|
||||
unsigned int shift = 0;
|
||||
|
||||
cmd = shift << 0x2;
|
||||
cmd |= 0x70;
|
||||
cmd = cmd << 0x10;
|
||||
cmd |= reg;
|
||||
lcd_send_msg(0x18, cmd);
|
||||
|
||||
cmd = shift << 0x2;
|
||||
cmd |= 0x72;
|
||||
cmd = cmd << 0x10;
|
||||
cmd |= data;
|
||||
lcd_send_msg(0x18, cmd);
|
||||
|
||||
// lcd_send_msg(0x70, reg);
|
||||
// lcd_send_msg(0x72, data);
|
||||
}
|
||||
*/
|
||||
|
||||
static void lcd_write_cmd(unsigned int cmd)
|
||||
{
|
||||
lcd_send_msg(0x18, (0x700000 | cmd));
|
||||
}
|
||||
|
||||
static void lcd_write_info(unsigned int data)
|
||||
{
|
||||
lcd_send_msg(0x18, (0x720000 | data));
|
||||
}
|
||||
|
||||
static void lcd_write_reg(unsigned int cmd, unsigned int data)
|
||||
{
|
||||
lcd_write_cmd(cmd);
|
||||
lcd_write_info(data);
|
||||
}
|
||||
|
||||
/* Run the powerup sequence for the driver IC */
|
||||
static void lcd_power_on(void)
|
||||
{
|
||||
/* OF: 0x5DC0 *
|
||||
* r2: cmd *
|
||||
* r3: data */
|
||||
lcd_write_reg(0xE5, 0x8000);
|
||||
lcd_write_reg(0x0, 0x1);
|
||||
lcd_write_reg(0x1, 0x100);
|
||||
lcd_write_reg(0x2, 0x700);
|
||||
lcd_write_reg(0x3, 0x1230);
|
||||
lcd_write_reg(0x4, 0x0);
|
||||
lcd_write_reg(0x8, 0x408);
|
||||
lcd_write_reg(0x9, 0x0);
|
||||
lcd_write_reg(0xa, 0x0);
|
||||
lcd_write_reg(0xd, 0x0);
|
||||
lcd_write_reg(0xf, 0x2);
|
||||
lcd_write_reg(0x10, 0x0);
|
||||
lcd_write_reg(0x11, 0x0);
|
||||
lcd_write_reg(0x12, 0x0);
|
||||
lcd_write_reg(0x13, 0x0);
|
||||
sleep(HZ/5);
|
||||
lcd_write_reg(0x10, 0x17B0);
|
||||
lcd_write_reg(0x11, 0x7);
|
||||
sleep(HZ/20);
|
||||
lcd_write_reg(0x12, 0x13c);
|
||||
sleep(HZ/20);
|
||||
|
||||
// OF: BNE 0x5fb2
|
||||
|
||||
// two different models in use?!?
|
||||
if (1)
|
||||
{
|
||||
lcd_write_reg(0x13, 0x1800);
|
||||
lcd_write_reg(0x29, 0x13);
|
||||
sleep(HZ/10);
|
||||
lcd_write_reg(0x20, 0x0);
|
||||
lcd_write_reg(0x21, 0x0);
|
||||
|
||||
lcd_write_reg(0x30, 0x2);
|
||||
lcd_write_reg(0x31, 0xF07); // 0x37 option in other controller
|
||||
lcd_write_reg(0x32, 0x403); // 0x31 option in other controller
|
||||
lcd_write_reg(0x35, 0x206);
|
||||
lcd_write_reg(0x36, 0x504);
|
||||
lcd_write_reg(0x37, 0x707);
|
||||
lcd_write_reg(0x38, 0x403);
|
||||
}
|
||||
else
|
||||
{
|
||||
// OF: last func continues, 0x5EFC
|
||||
lcd_write_reg(0x13, 0x1700);
|
||||
lcd_write_reg(0x29, 0x10);
|
||||
sleep(HZ/10);
|
||||
lcd_write_reg(0x20, 0x0);
|
||||
lcd_write_reg(0x21, 0x0);
|
||||
|
||||
lcd_write_reg(0x30, 0x7);
|
||||
lcd_write_reg(0x31, 0x403);
|
||||
lcd_write_reg(0x32, 0x400);
|
||||
lcd_write_reg(0x35, 0x3);
|
||||
lcd_write_reg(0x36, 0xF07);
|
||||
lcd_write_reg(0x37, 0x403);
|
||||
lcd_write_reg(0x37, 0x106);
|
||||
}
|
||||
|
||||
// OF: b 0x6066
|
||||
lcd_write_reg(0x39, 0x7);
|
||||
lcd_write_reg(0x3c, 0x700);
|
||||
lcd_write_reg(0x3d, 0x700);
|
||||
|
||||
lcd_write_reg(0x50, 0x0);
|
||||
lcd_write_reg(0x51, 0xef); // 239 - LCD_WIDTH
|
||||
lcd_write_reg(0x52, 0x0);
|
||||
lcd_write_reg(0x53, 0x13f); // 319 - LCD_HEIGHT
|
||||
|
||||
// OF: b 0x6114
|
||||
lcd_write_reg(0x60, 0x2700);
|
||||
lcd_write_reg(0x61, 0x1);
|
||||
lcd_write_reg(0x6a, 0x0);
|
||||
|
||||
lcd_write_reg(0x80, 0x0);
|
||||
lcd_write_reg(0x81, 0x0);
|
||||
lcd_write_reg(0x82, 0x0);
|
||||
lcd_write_reg(0x83, 0x0);
|
||||
lcd_write_reg(0x84, 0x0);
|
||||
lcd_write_reg(0x85, 0x0);
|
||||
|
||||
// OF: 0x61A8
|
||||
lcd_write_reg(0x90, 0x10);
|
||||
lcd_write_reg(0x92, 0x0);
|
||||
lcd_write_reg(0x93, 0x3);
|
||||
lcd_write_reg(0x95, 0x110);
|
||||
lcd_write_reg(0x97, 0x0);
|
||||
lcd_write_reg(0x98, 0x0);
|
||||
|
||||
lcd_write_reg(0xc, 0x110);
|
||||
lcd_write_reg(0x7, 0x173);
|
||||
sleep(HZ/10);
|
||||
lcd_write_cmd(0x22);
|
||||
|
||||
power_on = true;
|
||||
}
|
||||
|
||||
void unknown01(void)
|
||||
{
|
||||
// OF: 0x62C4
|
||||
|
||||
lcd_write_reg(0x10, 0x17B0);
|
||||
udelay(100);
|
||||
lcd_write_reg(0x7, 0x173);
|
||||
}
|
||||
|
||||
void unknown02(void)
|
||||
{
|
||||
// OF: 0x6308
|
||||
|
||||
lcd_write_reg(0x7, 0x160);
|
||||
lcd_write_reg(0x10, 0x17B1);
|
||||
}
|
||||
|
||||
void unknown03(void)
|
||||
{
|
||||
// OF: 0x6410
|
||||
GPIOJ_ENABLE |= 0x2;
|
||||
GPIOJ_OUTPUT_EN |= 0x2;
|
||||
GPIOJ_OUTPUT_VAL &= ~0x02;
|
||||
}
|
||||
|
||||
void unknown04(void)
|
||||
{
|
||||
// OF: 0x623C
|
||||
|
||||
GPIOB_OUTPUT_VAL |= 0x4;
|
||||
udelay(1000);
|
||||
GPIOB_OUTPUT_VAL &= ~0x4;
|
||||
sleep(HZ/10);
|
||||
GPIOB_OUTPUT_VAL |= 0x4;
|
||||
udelay(1000);
|
||||
}
|
||||
|
||||
/* Run the display on sequence for the driver IC */
|
||||
static void lcd_display_on(void)
|
||||
{
|
||||
display_on = true;
|
||||
}
|
||||
|
||||
|
||||
#if defined(HAVE_LCD_ENABLE) || defined(HAVE_LCD_SLEEP)
|
||||
bool lcd_active(void)
|
||||
{
|
||||
return display_on;
|
||||
}
|
||||
|
||||
/* Turn off visible display operations */
|
||||
static void lcd_display_off(void)
|
||||
{
|
||||
display_on = false;
|
||||
}
|
||||
#endif
|
||||
|
||||
void lcd_init_device(void)
|
||||
{
|
||||
|
||||
#ifdef BOOTLOADER /* Bother at all to do this again? */
|
||||
//#if 0
|
||||
/* Init GPIO ports */
|
||||
lcd_init_gpio();
|
||||
lcd_power_on();
|
||||
lcd_display_on();
|
||||
#else
|
||||
|
||||
power_on = true;
|
||||
display_on = true;
|
||||
|
||||
lcd_set_invert_display(false);
|
||||
lcd_set_flip(false);
|
||||
#endif
|
||||
}
|
||||
|
||||
#if defined(HAVE_LCD_ENABLE)
|
||||
void lcd_enable(bool on)
|
||||
{
|
||||
(void)on;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(HAVE_LCD_SLEEP)
|
||||
void lcd_sleep(void)
|
||||
{
|
||||
|
||||
}
|
||||
#endif
|
||||
|
||||
void lcd_update(void)
|
||||
{
|
||||
const fb_data *addr;
|
||||
|
||||
addr = &lcd_framebuffer[LCD_HEIGHT][LCD_WIDTH];
|
||||
|
||||
lcd_write_reg(0x20, 0x0);
|
||||
lcd_write_reg(0x21, 0x0);
|
||||
|
||||
int i,j;
|
||||
for(i=0; i < LCD_HEIGHT; i++)
|
||||
{
|
||||
for(j=0; j < LCD_WIDTH; j++)
|
||||
{
|
||||
lcd_write_reg(0x22, *addr);
|
||||
addr++;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/* Update a fraction of the display. */
|
||||
void lcd_update_rect(int x, int y, int width, int height)
|
||||
{
|
||||
(void)x;
|
||||
(void)y;
|
||||
(void)width;
|
||||
(void)height;
|
||||
lcd_update();
|
||||
}
|
||||
|
||||
|
||||
/*** hardware configuration ***/
|
||||
|
||||
void lcd_set_contrast(int val)
|
||||
{
|
||||
(void)val;
|
||||
}
|
||||
|
||||
void lcd_set_invert_display(bool yesno)
|
||||
{
|
||||
(void)yesno;
|
||||
}
|
||||
|
||||
/* turn the display upside down (call lcd_update() afterwards) */
|
||||
void lcd_set_flip(bool yesno)
|
||||
{
|
||||
(void)yesno;
|
||||
}
|
||||
|
||||
/* Blitting functions */
|
||||
|
||||
void lcd_yuv_set_options(unsigned options)
|
||||
{
|
||||
lcd_yuv_options = options;
|
||||
}
|
||||
|
||||
/* Line write helper function for lcd_yuv_blit. Write two lines of yuv420. */
|
||||
extern void lcd_write_yuv420_lines(fb_data *dst,
|
||||
unsigned char const * const src[3],
|
||||
int width,
|
||||
int stride);
|
||||
extern void lcd_write_yuv420_lines_odither(fb_data *dst,
|
||||
unsigned char const * const src[3],
|
||||
int width,
|
||||
int stride,
|
||||
int x_screen, /* To align dither pattern */
|
||||
int y_screen);
|
||||
|
||||
void lcd_blit_yuv(unsigned char * const src[3],
|
||||
int src_x, int src_y, int stride,
|
||||
int x, int y, int width, int height)
|
||||
{
|
||||
(void)src;
|
||||
(void)src_x;
|
||||
(void)src_y;
|
||||
(void)stride;
|
||||
(void)x;
|
||||
(void)y;
|
||||
(void)width;
|
||||
(void)height;
|
||||
}
|
|
@ -0,0 +1,28 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2009 by Robert Keevil
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
void power_init(void)
|
||||
{
|
||||
}
|
||||
|
||||
void power_off(void)
|
||||
{
|
||||
}
|
|
@ -0,0 +1,55 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2009 by Robert Keevil
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#include "config.h"
|
||||
#include "adc.h"
|
||||
#include "powermgmt.h"
|
||||
|
||||
unsigned int battery_adc_voltage(void)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* FIXME - next 4 functions taken from e200 - last 2 will need
|
||||
to be updated */
|
||||
const unsigned short battery_level_dangerous[BATTERY_TYPES_COUNT] =
|
||||
{
|
||||
3400
|
||||
};
|
||||
|
||||
const unsigned short battery_level_shutoff[BATTERY_TYPES_COUNT] =
|
||||
{
|
||||
3300
|
||||
};
|
||||
|
||||
/* voltages (millivolt) of 0%, 10%, ... 100% when charging disabled */
|
||||
const unsigned short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11] =
|
||||
{
|
||||
/* Sansa Li Ion 750mAH FIXME */
|
||||
{ 3300, 3680, 3740, 3760, 3780, 3810, 3870, 3930, 3970, 4070, 4160 },
|
||||
};
|
||||
|
||||
/* voltages (millivolt) of 0%, 10%, ... 100% when charging enabled */
|
||||
const unsigned short percent_to_volt_charge[11] =
|
||||
{
|
||||
/* Sansa Li Ion 750mAH FIXME */
|
||||
3300, 3680, 3740, 3760, 3780, 3810, 3870, 3930, 3970, 4070, 4160
|
||||
};
|
|
@ -0,0 +1,36 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2009 by Robert Keevil
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#include "usb.h"
|
||||
|
||||
int usb_detect(void)
|
||||
{
|
||||
return.0;
|
||||
}
|
||||
|
||||
void usb_enable(bool on)
|
||||
{
|
||||
(void)on;
|
||||
}
|
||||
|
||||
void usb_init_device(void)
|
||||
{
|
||||
}
|
|
@ -310,6 +310,14 @@ arm1136jfscc () {
|
|||
gccchoice="4.0.3"
|
||||
}
|
||||
|
||||
arm1176jzscc () {
|
||||
prefixtools arm-elf-
|
||||
GCCOPTS="$CCOPTS -mcpu=arm1176jz-s -mlong-calls"
|
||||
GCCOPTIMIZE="-fomit-frame-pointer"
|
||||
endian="little"
|
||||
gccchoice="4.0.3"
|
||||
}
|
||||
|
||||
mipselcc () {
|
||||
prefixtools mipsel-elf-
|
||||
GCCOPTS="$CCOPTS -march=mips32 -mtune=r4600 -mno-mips16 -mno-long-calls"
|
||||
|
@ -791,10 +799,10 @@ cat <<EOF
|
|||
58) Sansa Fuze
|
||||
==Onda== ==Meizu== 59) Sansa c200v2
|
||||
120) VX747 110) M6SL 60) Sansa Clipv2
|
||||
121) VX767 111) M6SP
|
||||
122) VX747+ 112) M3 ==Logik==
|
||||
123) VX777 80) DAX 1GB MP3/DAB
|
||||
|
||||
121) VX767 111) M6SP 61) Sansa View
|
||||
122) VX747+ 112) M3
|
||||
123) VX777 ==Logik==
|
||||
80) DAX 1GB MP3/DAB
|
||||
==Samsung== ==Tatung==
|
||||
140) YH-820 150) Elio TPJ-1022 ==Lyre project==
|
||||
141) YH-920 130) Lyre proto 1
|
||||
|
@ -1913,6 +1921,30 @@ fi
|
|||
t_model="sansa-clipv2"
|
||||
;;
|
||||
|
||||
61|view)
|
||||
echo "Sansa View is net yet supported!"
|
||||
exit 1
|
||||
target_id=63
|
||||
modelname="view"
|
||||
target="-DSANSA_VIEW"
|
||||
memory=32
|
||||
arm1176jzscc
|
||||
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
||||
bmp2rb_native="$rootdir/tools/bmp2rb -f 4"
|
||||
output="rockbox.mi4"
|
||||
appextra="gui"
|
||||
plugins=""
|
||||
swcodec="yes"
|
||||
boottool="$rootdir/tools/scramble -mi4v3 -model=view -type=RBBL"
|
||||
bootoutput="firmware.mi4"
|
||||
# toolset is the tools within the tools directory that we build for
|
||||
# this particular target.
|
||||
toolset=$scramblebitmaptools
|
||||
t_cpu="arm"
|
||||
t_manufacturer="sandisk"
|
||||
t_model="sansa-view"
|
||||
;;
|
||||
|
||||
150|tpj1022)
|
||||
target_id=25
|
||||
modelname="tpj1022"
|
||||
|
|
|
@ -183,7 +183,7 @@ case $arch in
|
|||
;;
|
||||
[Aa])
|
||||
target="arm-elf"
|
||||
gccpatch="rockbox-multilibs-arm-elf-gcc-4.0.3_2.diff"
|
||||
gccpatch="rockbox-multilibs-arm-elf-gcc-4.0.3_3.diff"
|
||||
;;
|
||||
[Ii])
|
||||
target="mipsel-elf"
|
||||
|
|
Loading…
Reference in New Issue