153 lines
5.1 KiB
C
153 lines
5.1 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2021 Aidan MacDonald
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef __AK4376_H__
|
|
#define __AK4376_H__
|
|
|
|
#define AUDIOHW_CAPS (FILTER_ROLL_OFF_CAP|POWER_MODE_CAP)
|
|
#define AUDIOHW_HAVE_SHORT2_ROLL_OFF
|
|
|
|
#define AK4376_MIN_VOLUME (-890)
|
|
#define AK4376_MAX_VOLUME 150
|
|
|
|
AUDIOHW_SETTING(VOLUME, "dB", 1, 5, AK4376_MIN_VOLUME, AK4376_MAX_VOLUME, -200)
|
|
AUDIOHW_SETTING(FILTER_ROLL_OFF, "", 0, 1, 0, 3, 0)
|
|
AUDIOHW_SETTING(POWER_MODE, "", 0, 1, 0, 1, 0)
|
|
|
|
/* Register addresses */
|
|
#define AK4376_REG_PWR1 0x00
|
|
#define AK4376_REG_PWR2 0x01
|
|
#define AK4376_REG_PWR3 0x02
|
|
#define AK4376_REG_PWR4 0x03
|
|
#define AK4376_REG_OUTPUT_MODE 0x04
|
|
#define AK4376_REG_CLOCK_MODE 0x05
|
|
#define AK4376_REG_FILTER 0x06
|
|
#define AK4376_REG_MIXER 0x07
|
|
#define AK4376_REG_LCH_VOLUME 0x0b
|
|
#define AK4376_REG_RCH_VOLUME 0x0c
|
|
#define AK4376_REG_AMP_VOLUME 0x0d
|
|
#define AK4376_REG_PLL_CLK_SRC 0x0e
|
|
#define AK4376_REG_PLL_REF_DIV1 0x0f
|
|
#define AK4376_REG_PLL_REF_DIV2 0x10
|
|
#define AK4376_REG_PLL_FB_DIV1 0x11
|
|
#define AK4376_REG_PLL_FB_DIV2 0x12
|
|
#define AK4376_REG_DAC_CLK_SRC 0x13
|
|
#define AK4376_REG_DAC_CLK_DIV 0x14
|
|
#define AK4376_REG_AUDIO_IF_FMT 0x15
|
|
#define AK4376_REG_CHIP_ID 0x21
|
|
#define AK4376_REG_MODE_CTRL 0x24
|
|
#define AK4376_REG_ADJUST1 0x26
|
|
#define AK4376_REG_ADJUST2 0x2a
|
|
#define AK4376_NUM_REGS 0x2b
|
|
|
|
/* Mixer controls, simply OR them together.
|
|
* LCH = add LCH signal to output
|
|
* RCH = add RCH signal to output
|
|
* HALF = multiply output by 1/2
|
|
* INVERT = invert the output after everything else
|
|
*/
|
|
#define AK4376_MIX_MUTE 0
|
|
#define AK4376_MIX_LCH 1
|
|
#define AK4376_MIX_RCH 2
|
|
#define AK4376_MIX_HALF 4
|
|
#define AK4376_MIX_INVERT 8
|
|
|
|
/* Min/max digital volumes in units of dB/10 */
|
|
#define AK4376_DIG_VOLUME_MIN (-120)
|
|
#define AK4376_DIG_VOLUME_MAX 30
|
|
#define AK4376_DIG_VOLUME_STEP 5
|
|
#define AK4376_DIG_VOLUME_MUTE (AK4376_DIG_VOLUME_MIN - 1)
|
|
|
|
/* Min/max headphone amp volumes in units of dB/10 */
|
|
#define AK4376_AMP_VOLUME_MIN (-200)
|
|
#define AK4376_AMP_VOLUME_MAX 60
|
|
#define AK4376_AMP_VOLUME_STEP 20
|
|
#define AK4376_AMP_VOLUME_MUTE (AK4376_AMP_VOLUME_MIN - 1)
|
|
|
|
/* Digital filters */
|
|
#define AK4376_FILTER_SHARP 0
|
|
#define AK4376_FILTER_SLOW 1
|
|
#define AK4376_FILTER_SHORT_SHARP 2
|
|
#define AK4376_FILTER_SHORT_SLOW 3
|
|
|
|
/* Frequency selection */
|
|
#define AK4376_FS_8 0
|
|
#define AK4376_FS_11 1
|
|
#define AK4376_FS_12 2
|
|
#define AK4376_FS_16 4
|
|
#define AK4376_FS_22 5
|
|
#define AK4376_FS_24 6
|
|
#define AK4376_FS_32 8
|
|
#define AK4376_FS_44 9
|
|
#define AK4376_FS_48 10
|
|
#define AK4376_FS_64 12
|
|
#define AK4376_FS_88 13
|
|
#define AK4376_FS_96 14
|
|
#define AK4376_FS_176 17
|
|
#define AK4376_FS_192 18
|
|
|
|
/* Functions to power on / off the DAC.
|
|
*
|
|
* NOTE: Target must call ak4376_set_frequency() after ak4376_open() to
|
|
* finish the power-up sequence of the headphone amp.
|
|
*/
|
|
extern void ak4376_open(void);
|
|
extern void ak4376_close(void);
|
|
|
|
/* Register read/write. Cached to avoid redundant reads/writes. */
|
|
extern void ak4376_write(int reg, int value);
|
|
extern int ak4376_read(int reg);
|
|
|
|
/* Target-specific function to set the PDN pin level. */
|
|
extern void ak4376_set_pdn_pin(int level);
|
|
|
|
/* Set overall output volume */
|
|
extern void ak4376_set_volume(int vol_l, int vol_r);
|
|
|
|
/* Set the roll-off filter */
|
|
extern void ak4376_set_filter_roll_off(int val);
|
|
|
|
/* Set audio sampling frequency and power mode.
|
|
*
|
|
* If the I2S master clock is being supplied externally, the caller must also
|
|
* give the master clock multiplier 'mult'. The accepted values depend on the
|
|
* sampling rate, see below:
|
|
*
|
|
* +-----------+------------------------+
|
|
* | frequency | master clock rate |
|
|
* +-----------+------------------------+
|
|
* | 8 - 24 | 256fs / 512fs / 1024fs |
|
|
* | 32 - 48 | 256fs / 512fs |
|
|
* | 64 - 96 | 256fs |
|
|
* | 128 - 192 | 128fs |
|
|
* +-----------+------------------------+
|
|
*
|
|
* Switching between high-power and low-power mode requires the same registers
|
|
* and power-up / power-down sequences as a frequency switch, so both settings
|
|
* are controlled by this function.
|
|
*
|
|
* high power mode -- use power_mode=0
|
|
* low power mode -- use power_mode=1
|
|
*/
|
|
extern void ak4376_set_freqmode(int fsel, int mult, int power_mode);
|
|
|
|
#endif /* __AK4376_H__ */
|