rockbox/firmware/export/ata.h

186 lines
5.9 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2002 by Alan Korr
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef __ATA_H__
#define __ATA_H__
#include <stdbool.h>
#include "config.h" /* for HAVE_MULTIVOLUME or not */
#include "mv.h" /* for IF_MV() and friends */
#ifdef HAVE_ATA_SMART
/* S.M.A.R.T. headers from smartmontools-5.42 */
#define NUMBER_ATA_SMART_ATTRIBUTES 30
struct ata_smart_attribute {
unsigned char id;
/* meaning of flag bits: see MACROS just below */
/* WARNING: MISALIGNED! */
unsigned short flags;
unsigned char current;
unsigned char worst;
unsigned char raw[6];
unsigned char reserv;
} __attribute__((packed));
/* MACROS to interpret the flags bits in the previous structure. */
/* These have not been implemented using bitflags and a union, to make */
/* it portable across bit/little endian and different platforms. */
/* 0: Prefailure bit */
/* From SFF 8035i Revision 2 page 19: Bit 0 (pre-failure/advisory bit) */
/* - If the value of this bit equals zero, an attribute value less */
/* than or equal to its corresponding attribute threshold indicates an */
/* advisory condition where the usage or age of the device has */
/* exceeded its intended design life period. If the value of this bit */
/* equals one, an attribute value less than or equal to its */
/* corresponding attribute threshold indicates a prefailure condition */
/* where imminent loss of data is being predicted. */
#define ATTRIBUTE_FLAGS_PREFAILURE(x) (x & 0x01)
/* 1: Online bit */
/* From SFF 8035i Revision 2 page 19: Bit 1 (on-line data collection */
/* bit) - If the value of this bit equals zero, then the attribute */
/* value is updated only during off-line data collection */
/* activities. If the value of this bit equals one, then the attribute */
/* value is updated during normal operation of the device or during */
/* both normal operation and off-line testing. */
#define ATTRIBUTE_FLAGS_ONLINE(x) (x & 0x02)
/* The following are (probably) IBM's, Maxtors and Quantum's definitions for the */
/* vendor-specific bits: */
/* 2: Performance type bit */
#define ATTRIBUTE_FLAGS_PERFORMANCE(x) (x & 0x04)
/* 3: Errorrate type bit */
#define ATTRIBUTE_FLAGS_ERRORRATE(x) (x & 0x08)
/* 4: Eventcount bit */
#define ATTRIBUTE_FLAGS_EVENTCOUNT(x) (x & 0x10)
/* 5: Selfpereserving bit */
#define ATTRIBUTE_FLAGS_SELFPRESERVING(x) (x & 0x20)
/* 6-15: Reserved for future use */
#define ATTRIBUTE_FLAGS_OTHER(x) ((x) & 0xffc0)
struct ata_smart_values
{
unsigned short int revnumber;
struct ata_smart_attribute vendor_attributes [NUMBER_ATA_SMART_ATTRIBUTES];
unsigned char offline_data_collection_status;
unsigned char self_test_exec_status;
unsigned short int total_time_to_complete_off_line;
unsigned char vendor_specific_366;
unsigned char offline_data_collection_capability;
unsigned short int smart_capability;
unsigned char errorlog_capability;
unsigned char vendor_specific_371;
unsigned char short_test_completion_time;
unsigned char extend_test_completion_time;
unsigned char conveyance_test_completion_time;
unsigned char reserved_375_385[11];
unsigned char vendor_specific_386_510[125];
unsigned char chksum;
} __attribute__((packed));
/* Raw attribute value print formats */
enum ata_attr_raw_format
{
RAWFMT_DEFAULT,
RAWFMT_RAW8,
RAWFMT_RAW16,
RAWFMT_RAW48,
RAWFMT_HEX48,
RAWFMT_RAW64,
RAWFMT_HEX64,
RAWFMT_RAW16_OPT_RAW16,
RAWFMT_RAW16_OPT_AVG16,
RAWFMT_RAW24_DIV_RAW24,
RAWFMT_RAW24_DIV_RAW32,
RAWFMT_SEC2HOUR,
RAWFMT_MIN2HOUR,
RAWFMT_HALFMIN2HOUR,
RAWFMT_MSEC24_HOUR32,
RAWFMT_TEMPMINMAX,
RAWFMT_TEMP10X,
};
#endif /* HAVE_ATA_SMART */
struct storage_info;
void ata_enable(bool on);
void ata_spindown(int seconds);
void ata_sleep(void);
void ata_sleepnow(void);
/* NOTE: DO NOT use this to poll for disk activity.
If you are waiting for the disk to become active before
doing something use ata_idle_notify.h
*/
bool ata_disk_is_active(void);
int ata_soft_reset(void);
int ata_init(void) STORAGE_INIT_ATTR;
void ata_close(void);
int ata_read_sectors(IF_MD(int drive,) unsigned long start, int count, void* buf);
int ata_write_sectors(IF_MD(int drive,) unsigned long start, int count, const void* buf);
void ata_spin(void);
#if (CONFIG_LED == LED_REAL)
void ata_set_led_enabled(bool enabled);
#endif
unsigned short* ata_get_identify(void);
#ifdef STORAGE_GET_INFO
void ata_get_info(IF_MD(int drive,) struct storage_info *info);
#endif
#ifdef HAVE_HOTSWAP
bool ata_removable(IF_MD_NONVOID(int drive));
bool ata_present(IF_MD_NONVOID(int drive));
#endif
#ifdef CONFIG_STORAGE_MULTI
int ata_num_drives(int first_drive);
#endif
long ata_last_disk_activity(void);
int ata_spinup_time(void); /* ticks */
/* Returns 1 if drive is solid-state */
int ata_disk_isssd(void);
#ifdef HAVE_ATA_DMA
/* Returns current DMA mode */
int ata_get_dma_mode(void);
#endif /* HAVE_ATA_DMA */
#ifdef HAVE_ATA_SMART
/* Returns current S.M.A.R.T. data */
int ata_read_smart(struct ata_smart_values*);
#endif
#ifdef BOOTLOADER
#define STORAGE_CLOSE
#endif
#endif /* __ATA_H__ */