251 lines
7.3 KiB
C
251 lines
7.3 KiB
C
/*
|
|
* This config file is for the Apple iPod Video
|
|
*/
|
|
|
|
#define IPOD_ARCH 1
|
|
|
|
#define MODEL_NAME "Apple iPod Video"
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 5
|
|
|
|
/* define this if you use an ATA controller */
|
|
#define CONFIG_STORAGE STORAGE_ATA
|
|
|
|
/* define this if the ATA controller and method of USB access support LBA48 */
|
|
#define HAVE_LBA48
|
|
|
|
/* define this if you have recording possibility */
|
|
#define HAVE_RECORDING
|
|
|
|
/* Define bitmask of input sources - recordable bitmask can be defined
|
|
explicitly if different */
|
|
#define INPUT_SRC_CAPS (SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
|
|
|
|
/* define the bitmask of hardware sample rates */
|
|
#define HW_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
|
|
SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
|
|
SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
|
|
|
|
/* define the bitmask of recording sample rates */
|
|
#define REC_SAMPR_CAPS HW_SAMPR_CAPS
|
|
|
|
|
|
|
|
|
|
/* define this if you have a colour LCD */
|
|
#define HAVE_LCD_COLOR
|
|
|
|
/* define this if you want album art for this target */
|
|
#define HAVE_ALBUMART
|
|
|
|
/* define this to enable bitmap scaling */
|
|
#define HAVE_BMP_SCALING
|
|
|
|
/* define this to enable JPEG decoding */
|
|
#define HAVE_JPEG
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 320
|
|
#define LCD_HEIGHT 240
|
|
/* sqrt(320^2 + 240^2) / 2.5 = 160.0 */
|
|
#define LCD_DPI 160
|
|
#define LCD_DEPTH 16 /* 65536 colours */
|
|
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
|
|
|
|
/* LCD stays visible without backlight - simulator hint */
|
|
#define HAVE_TRANSFLECTIVE_LCD
|
|
|
|
#define CONFIG_KEYPAD IPOD_4G_PAD
|
|
|
|
/* Define this to have CPU boosted while scrolling in the UI */
|
|
#define HAVE_GUI_BOOST
|
|
|
|
/* Define this to enable morse code input */
|
|
#define HAVE_MORSE_INPUT
|
|
|
|
|
|
|
|
|
|
/* define this if you have a real-time clock */
|
|
#define CONFIG_RTC RTC_PCF50605
|
|
|
|
/* Define if the device can wake from an RTC alarm */
|
|
#define HAVE_RTC_ALARM
|
|
|
|
/* Define this if you can switch on/off the accessory power supply */
|
|
#define HAVE_ACCESSORY_SUPPLY
|
|
|
|
/* Define this, if you can switch on/off the lineout */
|
|
#define HAVE_LINEOUT_POWEROFF
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x100000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x80000
|
|
|
|
/* Define this if you have the WM8758 audio codec */
|
|
#define HAVE_WM8758
|
|
|
|
#define AB_REPEAT_ENABLE
|
|
#define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
|
|
|
|
/* define this if you have a disk storage, i.e. something
|
|
that needs spinups and can cause skips when shaked */
|
|
#define HAVE_DISK_STORAGE
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
#define HAVE_BACKLIGHT_BRIGHTNESS
|
|
|
|
#ifndef BOOTLOADER
|
|
/* Support for LCD sleep/BCM shutdown */
|
|
#define HAVE_LCD_SLEEP
|
|
#define HAVE_LCD_SLEEP_SETTING
|
|
/* The same code may also be used when shutting down the iPod */
|
|
#define HAVE_LCD_SHUTDOWN
|
|
#endif
|
|
|
|
/* We can fade the backlight by using PWM */
|
|
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM
|
|
|
|
/* Main LCD backlight brightness range and defaults */
|
|
#define MIN_BRIGHTNESS_SETTING 1
|
|
#define MAX_BRIGHTNESS_SETTING 32
|
|
#define DEFAULT_BRIGHTNESS_SETTING 16
|
|
|
|
|
|
/* define this if the unit uses a scrollwheel for navigation */
|
|
#define HAVE_SCROLLWHEEL
|
|
/* define to activate advanced wheel acceleration code */
|
|
#define HAVE_WHEEL_ACCELERATION
|
|
/* define from which rotation speed [degree/sec] on the acceleration starts */
|
|
#define WHEEL_ACCEL_START 270
|
|
/* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
|
|
#define WHEEL_ACCELERATION 3
|
|
|
|
/* Define this if you can detect headphones */
|
|
#define HAVE_HEADPHONE_DETECTION
|
|
|
|
/* Type of mobile power */
|
|
#define BATTERY_CAPACITY_DEFAULT 400 /* only for variable initialisation */
|
|
#define BATTERY_CAPACITY_DEFAULT_THIN 400 /* default battery capacity for the
|
|
30GB model */
|
|
#define BATTERY_CAPACITY_DEFAULT_THICK 600 /* default battery capacity for the
|
|
60/80GB model */
|
|
#define BATTERY_CAPACITY_MIN 300 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 3000 /* max. capacity selectable --
|
|
3rd party batteries go this high */
|
|
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
|
|
|
|
/* Hardware controlled charging with monitoring */
|
|
#define CONFIG_CHARGING CHARGING_MONITOR
|
|
|
|
/* define this if the unit can be powered or charged via USB */
|
|
#define HAVE_USB_POWER
|
|
|
|
/* define this if the unit can have USB charging disabled by user -
|
|
* if USB/MAIN power is discernable and hardware doesn't compel charging */
|
|
#define HAVE_USB_CHARGING_ENABLE
|
|
|
|
/* define current usage levels */
|
|
#define CURRENT_NORMAL 24 /* 30MHz clock, LCD off, accessory supply on */
|
|
#define CURRENT_BACKLIGHT 20 /* FIXME: this needs adjusting */
|
|
#if defined(HAVE_RECORDING)
|
|
#define CURRENT_RECORD 35 /* FIXME: this needs adjusting */
|
|
#endif
|
|
|
|
/* Define Apple remote tuner */
|
|
#define CONFIG_TUNER IPOD_REMOTE_TUNER
|
|
#define HAVE_RDS_CAP
|
|
#define CONFIG_RDS RDS_CFG_PUSH
|
|
|
|
/* Define this if you have a PortalPlayer PP5022 */
|
|
#define CONFIG_CPU PP5022
|
|
|
|
/* Define this if you want to use the PP5020 i2c interface */
|
|
#define CONFIG_I2C I2C_PP5020
|
|
|
|
/* We're able to shut off power to the HDD */
|
|
#define HAVE_ATA_POWER_OFF
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
//#define HAVE_POWEROFF_WHILE_CHARGING
|
|
|
|
/* The start address index for ROM builds */
|
|
#define ROM_START 0x00000000
|
|
|
|
/* The size of the flash ROM */
|
|
#define FLASH_SIZE 0x100000
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 11289600
|
|
|
|
#define CONFIG_LCD LCD_IPODVIDEO
|
|
|
|
/* Offset ( in the firmware file's header ) to the file length */
|
|
#define FIRMWARE_OFFSET_FILE_LENGTH 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the real data */
|
|
#define FIRMWARE_OFFSET_FILE_DATA 8
|
|
|
|
/* USB On-the-go */
|
|
#define CONFIG_USBOTG USBOTG_ARC
|
|
|
|
/* enable these for the experimental usb stack */
|
|
#define HAVE_USBSTACK
|
|
#define USB_VENDOR_ID 0x05ac
|
|
#define USB_PRODUCT_ID 0x1209
|
|
#define HAVE_USB_HID_MOUSE
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
#define HAVE_ADJUSTABLE_CPU_FREQ
|
|
|
|
/* Define this if you can read an absolute wheel position */
|
|
#define HAVE_WHEEL_POSITION
|
|
|
|
#define HAVE_HARDWARE_CLICK
|
|
|
|
/* define this if the device has larger sectors when accessed via USB */
|
|
/* (only relevant in disk.c, fat.c now always supports large virtual sectors) */
|
|
#define MAX_LOG_SECTOR_SIZE 2048
|
|
|
|
/* define this if the hard drive uses large physical sectors (ATA-7 feature) */
|
|
/* and doesn't handle them in the drive firmware */
|
|
#define MAX_PHYS_SECTOR_SIZE 1024
|
|
|
|
#define BOOTFILE_EXT "ipod"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
#define ICODE_ATTR_TREMOR_NOT_MDCT
|
|
|
|
#define IPOD_ACCESSORY_PROTOCOL
|
|
#define HAVE_SERIAL
|
|
|
|
/* DMA is used only for reading on PP502x because although reads are ~8x faster
|
|
* writes appear to be ~25% slower.
|
|
*/
|
|
#ifndef BOOTLOADER
|
|
#define HAVE_ATA_DMA
|
|
#endif
|
|
|
|
/* Define this if a programmable hotkey is mapped */
|
|
#define HAVE_HOTKEY
|