183 lines
4.8 KiB
C
183 lines
4.8 KiB
C
/*
|
|
* This config file is for Samsung YP-S3
|
|
*/
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 53
|
|
|
|
#define MODEL_NAME "Samsumg YP-S3"
|
|
|
|
/* define this if you have recording possibility */
|
|
//#define HAVE_RECORDING
|
|
|
|
/* Define bitmask of input sources - recordable bitmask can be defined
|
|
explicitly if different */
|
|
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
|
|
|
|
/* define the bitmask of hardware sample rates */
|
|
#define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
|
|
|
|
/* define the bitmask of recording sample rates */
|
|
#define REC_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
|
|
|
|
|
|
|
|
|
|
/* define this if you can flip your LCD */
|
|
//#define HAVE_LCD_FLIP
|
|
|
|
/* define this if you have a colour LCD */
|
|
#define HAVE_LCD_COLOR
|
|
|
|
/* define this if you want album art for this target */
|
|
#define HAVE_ALBUMART
|
|
|
|
/* define this to enable bitmap scaling */
|
|
#define HAVE_BMP_SCALING
|
|
|
|
/* define this to enable JPEG decoding */
|
|
#define HAVE_JPEG
|
|
|
|
/* define this if you can invert the colours on your LCD */
|
|
//#define HAVE_LCD_INVERT
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* define this if you have a flash memory storage */
|
|
#define HAVE_FLASH_STORAGE
|
|
|
|
#define CONFIG_STORAGE STORAGE_NAND
|
|
|
|
#define CONFIG_NAND NAND_SAMSUNG
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 176
|
|
#define LCD_HEIGHT 220
|
|
/* sqrt(176^2 + 220^2) / 1.8 = 156.5 */
|
|
#define LCD_DPI 157
|
|
#define LCD_DEPTH 16 /* pseudo 262.144 colors */
|
|
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
|
|
|
|
/* Define this if your LCD can be enabled/disabled */
|
|
//#define HAVE_LCD_ENABLE
|
|
|
|
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
|
|
should be defined as well. */
|
|
//#define HAVE_LCD_SLEEP
|
|
|
|
/* We have button lights */
|
|
#define HAVE_BUTTON_LIGHT
|
|
|
|
#define CONFIG_KEYPAD MEIZU_M3_PAD
|
|
|
|
/* We have headphone detection */
|
|
#define HAVE_HEADPHONE_DETECTION
|
|
|
|
//#define AB_REPEAT_ENABLE
|
|
//#define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
|
|
|
|
|
|
|
|
|
|
/* define this if you have a real-time clock */
|
|
#define CONFIG_RTC RTC_S35390A
|
|
|
|
/* Define the type of audio codec */
|
|
//#define HAVE_WM....
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
#define HAVE_BACKLIGHT_BRIGHTNESS
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x100000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x80000
|
|
|
|
/* FM Tuner */
|
|
#define CONFIG_TUNER SI4700
|
|
#define CONFIG_TUNER_XTAL 32768
|
|
|
|
/* assume no tone controls, so we use the software ones */
|
|
#define HAVE_SW_TONE_CONTROLS
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 580 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 580 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 580 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
|
|
|
|
/* Hardware controlled charging, software can monitor plug and charge state */
|
|
#define CONFIG_CHARGING CHARGING_MONITOR
|
|
|
|
/* Define this if your LCD can set contrast */
|
|
//#define HAVE_LCD_CONTRAST
|
|
|
|
/* We have a Samsung S5L8700 */
|
|
#define CONFIG_CPU S5L8700
|
|
|
|
/* We use the S5L8700 i2c interface */
|
|
#define CONFIG_I2C I2C_S5L8700
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
//#define HAVE_POWEROFF_WHILE_CHARGING
|
|
|
|
/* The size of the flash ROM */
|
|
#define FLASH_SIZE 0x400000
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 200000000
|
|
|
|
/* Define this if you have ATA power-off control */
|
|
//#define HAVE_ATA_POWER_OFF
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the real data */
|
|
#define FIRMWARE_OFFSET_FILE_DATA 8
|
|
|
|
/* USB */
|
|
//#define HAVE_USBSTACK
|
|
#define USB_VENDOR_ID 0x04E8
|
|
#define USB_PRODUCT_ID 0x5090
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
#define HAVE_ADJUSTABLE_CPU_FREQ
|
|
|
|
#define BOOTFILE_EXT "yps3"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
//#define BOOTLOADER_ENTRYPOINT 0x001F0000
|
|
//#define FLASH_ENTRYPOINT 0x00001000
|
|
//#define FLASH_MAGIC 0xfbfbfbf1
|
|
|
|
/* Define this for FM radio input available */
|
|
#define HAVE_FMRADIO_IN
|
|
|
|
/** Port-specific settings **/
|
|
|
|
/* Main LCD contrast range and defaults */
|
|
#define MIN_CONTRAST_SETTING 1
|
|
#define MAX_CONTRAST_SETTING 30
|
|
#define DEFAULT_CONTRAST_SETTING 19 /* Match boot contrast */
|
|
|
|
/* Main LCD backlight brightness range and defaults */
|
|
#define MIN_BRIGHTNESS_SETTING 0
|
|
#define MAX_BRIGHTNESS_SETTING 15
|
|
#define DEFAULT_BRIGHTNESS_SETTING 10
|
|
|
|
/* Define this if a programmable hotkey is mapped */
|
|
#define HAVE_HOTKEY
|