rockbox/firmware/export/wm8731.h

189 lines
6.6 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2005 by Dave Chapman
*
* Header file for WM8711/WM8721/WM8731 codecs.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef _WM8731_H
#define _WM8731_H
#define AUDIOHW_CAPS (LIN_GAIN_CAP | MIC_GAIN_CAP)
AUDIOHW_SETTING(VOLUME, "dB", 0, 1, -74, 6, -25)
#if defined(HAVE_WM8731) && defined(HAVE_RECORDING)
/* Line in: 0 .. 31 => Volume -34.5 .. +12 dB */
AUDIOHW_SETTING(LEFT_GAIN, "dB", 1, 1, 0, 31, 23, (val - 23) * 15)
AUDIOHW_SETTING(RIGHT_GAIN, "dB", 1, 1, 0, 31, 23, (val - 23) * 15)
/* Microphone: 0 or 20 dB */
AUDIOHW_SETTING(MIC_GAIN, "dB", 1, 1, 0, 1, 0, val * 200)
#endif /* defined(HAVE_WM8731) && defined(HAVE_RECORDING) */
/* Common register bits */
#ifdef HAVE_WM8731
#define WMC_IN_VOL_MASK 0x1f
#define WMC_IN_VOL(x) ((x) & WMC_IN_VOL_MASK)
#define WMC_IN_MUTE (1 << 7)
#endif /* WM8731 */
#define WMC_OUT_VOL_MASK 0x7f
#define WMC_OUT_VOL(x) ((x) & WMC_OUT_VOL_MASK)
#define WMC_OUT_ZCEN (1 << 7)
#define WMC_BOTH (1 << 8)
/* Register addresses and bits */
#ifdef HAVE_WM8731
#define LINVOL 0x00
#define LINVOL_DEFAULT 0x79
/* Use IN common bits */
#define RINVOL 0x01
#define RINVOL_DEFAULT 0x79
/* Use IN common bits */
#endif /* WM8731 */
#define LOUTVOL 0x02
#define LOUTVOL_DEFAULT 0x079
/* Use OUT common bits */
#define ROUTVOL 0x03
#define ROUTVOL_DEFAULT 0x079
/* Use OUT common bits */
#define AAPCTRL 0x04 /* Analog audio path control */
#define AAPCTRL_DACSEL (1 << 4)
#if defined(HAVE_WM8711)
#define AAPCTRL_DEFAULT 0x008 /* BYPASS enabled */
#define AAPCTRL_BYPASS (1 << 3)
#elif defined(HAVE_WM8721)
#define AAPCTRL_DEFAULT 0x000
#elif defined(HAVE_WM8731)
#define AAPCTRL_DEFAULT 0x00a /* BYPASS enabled, MUTEMIC */
#define AAPCTRL_MIC_BOOST (1 << 0)
#define AAPCTRL_MUTEMIC (1 << 1)
#define AAPCTRL_INSEL (1 << 2)
#define AAPCTRL_BYPASS (1 << 3)
#define AAPCTRL_SIDETONE (1 << 5)
#define AAPCTRL_SIDEATT_MASK (3 << 6)
#define AAPCTRL_SIDEATT_6dB (0 << 6)
#define AAPCTRL_SIDEATT_9dB (1 << 6)
#define AAPCTRL_SIDEATT_12dB (2 << 6)
#define AAPCTRL_SIDEATT_15dB (3 << 6)
#endif /* WM87x1 */
#define DAPCTRL 0x05 /* Digital audio path control */
#define DAPCTRL_DEFAULT 0x008
#define DAPCTRL_DEEMP_DISABLE (0 << 1)
#define DAPCTRL_DEEMP_32KHz (1 << 1)
#define DAPCTRL_DEEMP_44KHz (2 << 1)
#define DAPCTRL_DEEMP_48KHz (3 << 1)
#define DAPCTRL_DEEMP_MASK (3 << 1)
#define DAPCTRL_DACMU (1 << 3)
#if defined(HAVE_WM8731)
#define DAPCTRL_ADCHPD (1 << 0)
#define DAPCTRL_HPOR (1 << 4)
#endif /* WM8731 */
#define PDCTRL 0x06
#define PDCTRL_DACPD (1 << 3)
#define PDCTRL_OUTPD (1 << 4)
#define PDCTRL_POWEROFF (1 << 7)
#if defined(HAVE_WM8711)
#define PDCTRL_DEFAULT 0x09f /* CLKPD, OSCPD not off */
#define PDCTRL_OSCPD (1 << 5)
#define PDCTRL_CLKOUTPD (1 << 6)
/* These bits should always be '1' */
#define PDCTRL_ALWAYS_SET 0x007
#elif defined(HAVE_WM8721)
#define PDCTRL_DEFAULT 0x0ff
/* These bits should always be '1' */
#define PDCTRL_ALWAYS_SET 0x067
#elif defined(HAVE_WM8731)
#define PDCTRL_DEFAULT 0x09f /* CLKPD, OSCPD not off */
#define PDCTRL_LINEINPD (1 << 0)
#define PDCTRL_MICPD (1 << 1)
#define PDCTRL_ADCPD (1 << 2)
#define PDCTRL_OSCPD (1 << 5)
#define PDCTRL_CLKOUTPD (1 << 6)
/* These bits should always be '1' */
#define PDCTRL_ALWAYS_SET 0x000
#endif
#define AINTFCE 0x07
#define AINTFCE_DEFAULT 0x00a
#define AINTFCE_FORMAT_MSB_RJUST (0 << 0)
#define AINTFCE_FORMAT_MSB_LJUST (1 << 0)
#define AINTFCE_FORMAT_I2S (2 << 0)
#define AINTFCE_FORMAT_DSP (3 << 0)
#define AINTFCE_FORMAT_MASK (3 << 0)
#define AINTFCE_IWL_16BIT (0 << 2)
#define AINTFCE_IWL_20BIT (1 << 2)
#define AINTFCE_IWL_24BIT (2 << 2)
#define AINTFCE_IWL_32BIT (3 << 2)
#define AINTFCE_IWL_MASK (3 << 2)
#define AINTFCE_LRP_I2S_RLO (0 << 4)
#define AINTFCE_LRP_I2S_RHI (1 << 4)
#define AINTFCE_DSP_MODE_B (0 << 4)
#define AINTFCE_DSP_MODE_A (1 << 4)
#define AINTFCE_LRSWAP (1 << 5)
#define AINTFCE_MS (1 << 6)
#define AINTFCE_BCLKINV (1 << 7)
#define SAMPCTRL 0x08
#define SAMPCTRL_DEFAULT 0x000
#define SAMPCTRL_USB (1 << 0)
/* For 88.2, 96 */
#define SAMPCTRL_BOSR_NOR_128fs (0 << 1)
#define SAMPCTRL_BOSR_NOR_192fs (1 << 1)
/* */
#define SAMPCTRL_BOSR_NOR_256fs (0 << 1)
#define SAMPCTRL_BOSR_NOR_384fs (1 << 1)
#define SAMPCTRL_BOSR_USB_250fs (0 << 1)
#define SAMPCTRL_BOSR_USB_272fs (1 << 1)
/* Bits 2-5:
* Sample rate setting are device-specific.
* See WM8711/WM8721/WM8731 datasheet for proper settings for the
* device's clocking */
#define SAMPCTRL_SR_MASK (0xf << 2)
#define SAMPCTRL_CLKIDIV2 (1 << 6)
#if defined(HAVE_WM8711) || defined(HAVE_WM8731)
#define SAMPCTRL_CLKODIV2 (1 << 7)
#endif
#define ACTIVECTRL 0x09
#define ACTIVECTRL_DEFAULT 0x000
#define ACTIVECTRL_ACTIVE (1 << 0)
#define RESET 0x0f
/* No reset default */
#define RESET_RESET 0x000
#define WMC_NUM_REGS 0x0a /* RESET not included */
/* SAMPCTRL values for the supported samplerates (24MHz MCLK/USB): */
#define WMC_USB24_8000HZ 0x4d
#define WMC_USB24_32000HZ 0x59
#define WMC_USB24_44100HZ 0x63
#define WMC_USB24_48000HZ 0x41
#define WMC_USB24_88200HZ 0x7f
#define WMC_USB24_96000HZ 0x5d
#endif /* _WM8731_H */