nihilazo/rockbox
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
CONSTRUCTION AREA
23,139 Commits 1 Branch 0 Tags 176 MiB
C 88.8%
C++ 5.2%
Assembly 2%
TeX 1.5%
Lua 0.7%
Other 1.5%
3e2aba0c3e
Go to file
Teruaki Kawashima 3e2aba0c3e jpeg,png: Separate code to load file from load_and_show(). 
Add a way to abort loading to jpeg inspired by png.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24075 a1c6a512-1295-4272-9138-f99709370657
2009-12-18 13:06:21 +00:00
apps jpeg,png: Separate code to load file from load_and_show(). 2009-12-18 13:06:21 +00:00
backdrops Remove svn:executable 2009-12-11 14:50:57 +00:00
bootloader make tpj1022 bootloader compile again 2009-12-07 16:12:49 +00:00
docs Accept FS #10271 by Christian Beier: Automatically disable voice upon rockdoom startup. 2009-12-18 04:25:56 +00:00
firmware Onda VX747/VX777: fix FM radio 2009-12-18 12:41:12 +00:00
flash Simplify powermgmt thread loops so it calls functions turn (no more power_thread_sleep). Do other target-friendly simplifications, generic battery switch handling and split sim-specific code. Whoever can, please verify charging on the Archos Recorder (due to change in the charger duty cycle code). 2008-12-24 16:58:41 +00:00
fonts Forgot emdash and endash for 19-Nimbus 2009-05-19 22:03:16 +00:00
gdb Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
icons kill the release script and build tarball from *everything* in SVN... 2008-03-26 13:12:07 +00:00
manual Remove reference to dynamic playlists from bookmarking section; these cannot currently be bookmarked. 2009-12-18 12:14:29 +00:00
rbutil Remove scanning for Ipod from Ipod bootloader installation and clean it up a bit. The Ipod is specified by its mountpoint, so there is no need to scan at all. 2009-12-17 21:54:07 +00:00
tools Renamed special archosrecorderv2fm manual build to standard archosfmrecorder. 2009-12-17 13:53:17 +00:00
uisimulator Enable backlight brightness in simulator 2009-12-17 13:44:09 +00:00
utils Revert an accidental commit that I didn't want to go in. 2009-12-04 02:54:27 +00:00
wps Make the classic_statusbar.sbs more classic. Icons, position of numbers, charging animation (only tested on a colour display so far), volume as before but gets a 'clipping' icon on targets that allow more than 0dB, add channels indicator in the rec screen. The only difference on swcodec should be the disk activity indicator on flash targets (for now). On hwcodec there are small differences in the recording screen - quality display is simply using the system font (no wasting another bitmap on a slightly less taller Q), frequency uses icons now (keeping the differences between the sbs files smaller and with the small 'k' it's easier to understand, but debateable). Since the animation makes use of the viewport colour (shades) parameters, a classic_statusbar.grey.sbs was needed - reusing the colour one didn't work correctly anyways. The difference between Recorders (RTC) and Ondios (disk activity) is achieved through the 112x64x1.sbs file itself. 2009-11-28 16:37:33 +00:00

docs/README 

               __________               __   ___.
     Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
     Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
     Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
     Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
                       \/            \/     \/    \/            \/

Build Your Own Rockbox

1. Check out 'rockbox' from SVN (or extract a downloaded archive).

   $ svn co svn://svn.rockbox.org/rockbox/trunk rockbox

     or

   $ tar xjf rockbox.tar.bz2

2. Create a build directory, preferably in the same directory as the firmware/
   and apps/ directories. This is where all generated files will be written.

   $ cd rockbox
   $ mkdir build
   $ cd build

3. Make sure you have sh/arm/m68k-elf-gcc and siblings in the PATH. Make sure
   that you have 'perl' in your PATH too. Your gcc cross compiler needs to be
   a particular version depending on what player you are compiling for. These
   can be acquired with the rockboxdev.sh script in the /tools/ folder of the
   source, or will have been included if you've installed one of the
   toolchains or development environments provided at http://www.rockbox.org/

   $ which sh-elf-gcc
   $ which perl

4. In your build directory, run the 'tools/configure' script and enter what
   target you want to build for and if you want a debug version or not (and a
   few more questions). It'll prompt you. The debug version is for making a
   gdb version out of it. It is only useful if you run gdb towards your target
   Archos.

   $ ../tools/configure

5. *ploink*. Now you have got a Makefile generated for you.

6. Run 'make' and soon the necessary pieces from the firmware and the apps
   directories have been compiled, linked and scrambled for you.

   $ make
   $ make zip

7. unzip the rockbox.zip on your music player, reboot it and
   *smile*.

If you want to build for more than one target, just create several build
directories and create a setup for each target:

   $ mkdir build-fmrecorder
   $ cd build-fmrecorder
   $ ../tools/configure

   $ mkdir build-player
   $ cd build-player
   $ ../tools/configure

Questions anyone? Ask on the mailing list. We'll be happy to help you!