rockbox/firmware/export/cw2015.h

58 lines
2.0 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2021 Aidan MacDonald
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef __CW2015_H__
#define __CW2015_H__
#include <stdint.h>
#include <stdbool.h>
/* Driver for I2C battery fuel gauge IC CW2015. */
#define CW2015_REG_VERSION 0x00
#define CW2015_REG_VCELL 0x02 /* 14 bits, registers 0x02 - 0x03 */
#define CW2015_REG_SOC 0x04 /* 16 bits, registers 0x04 - 0x05 */
#define CW2015_REG_RRT_ALERT 0x06 /* 13 bit RRT + alert flag, 0x06-0x07 */
#define CW2015_REG_CONFIG 0x08
#define CW2015_REG_MODE 0x0a
#define CW2015_REG_BATINFO 0x10 /* cf. mainline Linux CW2015 driver */
#define CW2015_SIZE_BATINFO 64
extern void cw2015_init(void);
/* Read the battery terminal voltage, converted to millivolts. */
extern int cw2015_get_vcell(void);
/* Read the SOC, in percent (0-100%). */
extern int cw2015_get_soc(void);
/* Get the estimated remaining run time, in minutes.
* Not a linearly varying quantity, according to the datasheet. */
extern int cw2015_get_rrt(void);
/* Read the current battery profile */
extern const uint8_t* cw2015_get_bat_info(void);
/* Debug screen */
extern bool cw2015_debug_menu(void);
#endif /* __CW2015_H__ */