152 lines
4.2 KiB
C
152 lines
4.2 KiB
C
/*
|
|
* This config file is for the Tatung Elio TPJ-1022
|
|
*/
|
|
|
|
#define MODEL_NAME "Tatung Elio TPJ-1022"
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 15
|
|
|
|
/* define this if you use an ATA controller */
|
|
#define CONFIG_STORAGE STORAGE_ATA
|
|
|
|
/*define this if the ATA controller and method of USB access support LBA48 */
|
|
#define HAVE_LBA48
|
|
|
|
/* define this if you have recording possibility */
|
|
/*#define HAVE_RECORDING*/ /* TODO: add support for this */
|
|
|
|
/* define the bitmask of hardware sample rates */
|
|
#define HW_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
|
|
SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
|
|
|
|
/* define the bitmask of recording sample rates
|
|
#define REC_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
|
|
SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) */
|
|
|
|
|
|
|
|
|
|
/* define this if you have a colour LCD */
|
|
#define HAVE_LCD_COLOR
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 220
|
|
#define LCD_HEIGHT 176
|
|
/* sqrt(220^2 + 176^2) / 2.2 = 128.1 */
|
|
#define LCD_DPI 128
|
|
#define LCD_DEPTH 16 /* 65536 colours */
|
|
#define LCD_PIXELFORMAT RGB565
|
|
|
|
/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
|
|
|
|
#define CONFIG_KEYPAD TATUNG_TPJ1022_PAD
|
|
|
|
|
|
|
|
|
|
/* define this if you have a real-time clock */
|
|
#ifndef BOOTLOADER
|
|
//#define CONFIG_RTC RTC_E8564
|
|
#endif
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x100000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x80000
|
|
|
|
/* Define this if you have the WM8731 audio codec */
|
|
#define HAVE_WM8731
|
|
|
|
#define AB_REPEAT_ENABLE
|
|
|
|
/* define this if you have a disk storage, i.e. something
|
|
that needs spinups and can cause skips when shaked */
|
|
#define HAVE_DISK_STORAGE
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 1550 /* default battery capacity
|
|
TODO: check this, probably different
|
|
for different models too */
|
|
#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 1600 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 10 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
|
|
|
|
/* Hardware controlled charging? FIXME */
|
|
#define CONFIG_CHARGING CHARGING_SIMPLE
|
|
|
|
/* define this if the unit can be powered or charged via USB */
|
|
/*#define HAVE_USB_POWER*/
|
|
|
|
/* Define this if you have a PortalPlayer PP5020 */
|
|
#define CONFIG_CPU PP5020
|
|
|
|
/* Define this if you want to use the PP5020 i2c interface */
|
|
#define CONFIG_I2C I2C_PP5020
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
/* TODO: should this be set for the H10? */
|
|
//#define HAVE_POWEROFF_WHILE_CHARGING
|
|
|
|
/* The start address index for ROM builds */
|
|
#define ROM_START 0x00000000
|
|
|
|
/* Define this to the CPU frequency */
|
|
/* TODO: this is probably wrong */
|
|
#define CPU_FREQ 11289600
|
|
|
|
/* Type of LCD */
|
|
#define CONFIG_LCD LCD_TPJ1022
|
|
|
|
#define DEFAULT_CONTRAST_SETTING 19
|
|
|
|
/* Offset ( in the firmware file's header ) to the file length */
|
|
#define FIRMWARE_OFFSET_FILE_LENGTH 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the real data */
|
|
#define FIRMWARE_OFFSET_FILE_DATA 8
|
|
|
|
/* USB On-the-go */
|
|
#define CONFIG_USBOTG USBOTG_ARC
|
|
|
|
/* define this if the unit can be powered or charged via USB */
|
|
#define HAVE_USB_POWER
|
|
|
|
/* enable these for the experimental usb stack ROOLKU */
|
|
#define HAVE_USBSTACK
|
|
#define USB_VENDOR_ID 0x07B4
|
|
#define USB_PRODUCT_ID 0x0280
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
#define HAVE_ADJUSTABLE_CPU_FREQ
|
|
|
|
#define BOOTFILE_EXT "elio"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
|
|
/* DMA is used only for reading on PP502x because although reads are ~8x faster
|
|
* writes appear to be ~25% slower.
|
|
*/
|
|
#ifndef BOOTLOADER
|
|
#define HAVE_ATA_DMA
|
|
#endif
|
|
|
|
/* Define this if a programmable hotkey is mapped */
|
|
//#define HAVE_HOTKEY
|