163 lines
5.0 KiB
C
163 lines
5.0 KiB
C
/*
|
|
* This config file is for the RockBox as application on the Samsung YP-R0 player.
|
|
* The target name for ifdefs is: SAMSUNG_YPR0; or CONFIG_PLATFORM & PLAFTORM_YPR0
|
|
*/
|
|
|
|
/* We don't run on hardware directly */
|
|
/* YP-R0 need it too of course */
|
|
#ifndef SIMULATOR
|
|
#define CONFIG_PLATFORM (PLATFORM_HOSTED)
|
|
#endif
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 100
|
|
|
|
#define MODEL_NAME "Samsung YP-R0"
|
|
|
|
/* define this if you have a bitmap LCD display */
|
|
#define HAVE_LCD_BITMAP
|
|
|
|
/* define this if you have a colour LCD */
|
|
#define HAVE_LCD_COLOR
|
|
|
|
/* Define this if the LCD can shut down */
|
|
#define HAVE_LCD_SHUTDOWN
|
|
|
|
/* define this if you have LCD enable function */
|
|
#define HAVE_LCD_ENABLE
|
|
|
|
/* define this if you want album art for this target */
|
|
#define HAVE_ALBUMART
|
|
|
|
/* define this to enable bitmap scaling */
|
|
#define HAVE_BMP_SCALING
|
|
|
|
/* define this to enable JPEG decoding */
|
|
#define HAVE_JPEG
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 240
|
|
#define LCD_HEIGHT 320
|
|
|
|
#define LCD_DEPTH 16
|
|
/* Check that but should not matter */
|
|
#define LCD_PIXELFORMAT RGB565
|
|
|
|
/* YP-R0 has the backlight */
|
|
#define HAVE_BACKLIGHT
|
|
|
|
/* Define this for LCD backlight brightness available */
|
|
#define HAVE_BACKLIGHT_BRIGHTNESS
|
|
|
|
/* Main LCD backlight brightness range and defaults */
|
|
/* 0 is turned off. 31 is the real maximum for the ASCODEC DCDC but samsung doesn't use any value over 15, so it safer to don't go up too much */
|
|
#define MIN_BRIGHTNESS_SETTING 1
|
|
#define MAX_BRIGHTNESS_SETTING 15
|
|
#define DEFAULT_BRIGHTNESS_SETTING 4
|
|
|
|
/* Which backlight fading type? */
|
|
/* TODO: ASCODEC has an auto dim feature, so disabling the supply to leds should do the trick. But for now I tested SW fading only */
|
|
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
|
|
|
|
/* define this if you have RTC RAM available for settings */
|
|
/* TODO: in theory we could use that, ascodec offers us such a ram. we have also a small device, part of the nand of 1 MB size, that Samsung uses to store region code etc and it's almost unused space */
|
|
//#define HAVE_RTC_RAM
|
|
|
|
/* define this if you have a real-time clock */
|
|
#define CONFIG_RTC RTC_AS3514
|
|
#define HAVE_RTC_ALARM
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x80000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x100000
|
|
|
|
#define AB_REPEAT_ENABLE
|
|
#define ACTION_WPSAB_SINGLE ACTION_WPS_HOTKEY
|
|
|
|
/* Define this if you do software codec */
|
|
#define CONFIG_CODEC SWCODEC
|
|
|
|
/* R0 KeyPad configuration for plugins */
|
|
#define CONFIG_KEYPAD SAMSUNG_YPR0_PAD
|
|
#define BUTTON_DRIVER_CLOSE
|
|
|
|
/** Non-simulator section **/
|
|
#ifndef SIMULATOR
|
|
|
|
/*TODO: implement USB data transfer management -> see safe mode script and think a way to implemtent it in the code */
|
|
#define USB_NONE
|
|
|
|
/* The YPR0 has a as3534 codec */
|
|
#define HAVE_AS3514
|
|
#define HAVE_AS3543
|
|
|
|
/* We don't have hardware controls */
|
|
#define HAVE_SW_TONE_CONTROLS
|
|
|
|
/* We have the Si4709, which supports RDS */
|
|
#define CONFIG_TUNER SI4700
|
|
#define HAVE_TUNER_PWR_CTRL
|
|
#define HAVE_RDS_CAP
|
|
|
|
/* Define this for FM radio input available */
|
|
#define HAVE_FMRADIO_IN
|
|
#define INPUT_SRC_CAPS SRC_CAP_FMRADIO
|
|
|
|
/* We have a GPIO pin that detects this */
|
|
#define HAVE_HEADPHONE_DETECTION
|
|
|
|
/* Define current usage levels. */
|
|
#define CURRENT_NORMAL 24 /* ~25h, on 600mAh that's about 24mA */
|
|
#define CURRENT_BACKLIGHT 62 /* ~6,5h -> 92mA. Minus 24mA normal that gives us 68mA */
|
|
|
|
#endif /* SIMULATOR */
|
|
|
|
/* FIXME
|
|
* Lot of people reports bad battery life and funny charging times.
|
|
* Check what's going on...
|
|
*/
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 600 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 600 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 600 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
|
|
|
|
/* Linux controlls charging, we can monitor */
|
|
#define CONFIG_CHARGING CHARGING_MONITOR
|
|
|
|
/* same dimensions as gigabeats */
|
|
#define CONFIG_LCD LCD_YPR0
|
|
|
|
/* Define this if a programmable hotkey is mapped */
|
|
#define HAVE_HOTKEY
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* Define this if you have adjustable CPU frequency
|
|
* NOTE: We could do that on this device, but it's probably better
|
|
* to let linux do it (we set ondemand governor before loading Rockbox) */
|
|
/* #define HAVE_ADJUSTABLE_CPU_FREQ */
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 532000000
|
|
/* 0.8Vcore using 200 MHz */
|
|
/* #define CPUFREQ_DEFAULT 200000000 */
|
|
/* This is 400 MHz -> not so powersaving-ful */
|
|
/* #define CPUFREQ_NORMAL 400000000 */
|
|
/* Max IMX37 Cpu Frequency */
|
|
/* #define CPUFREQ_MAX CPU_FREQ */
|
|
|
|
/* This folder resides in the ReadOnly CRAMFS. It is binded to /mnt/media0/.rockbox */
|
|
#define BOOTDIR "/.rockbox"
|