223 lines
6.3 KiB
C
223 lines
6.3 KiB
C
/*
|
|
* This config file is for the Apple iPod Color/Photo
|
|
*/
|
|
|
|
#define IPOD_ARCH 1
|
|
|
|
#define MODEL_NAME "Apple iPod Color/Photo"
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 3
|
|
|
|
/* define this if you use an ATA controller */
|
|
#define CONFIG_STORAGE STORAGE_ATA
|
|
|
|
/*define this if the ATA controller and method of USB access support LBA48 */
|
|
#define HAVE_LBA48
|
|
|
|
/* define this if you have recording possibility */
|
|
#define HAVE_RECORDING
|
|
|
|
/* Define bitmask of input sources - recordable bitmask can be defined
|
|
explicitly if different */
|
|
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
|
|
|
|
/* define the bitmask of hardware sample rates */
|
|
#define HW_SAMPR_CAPS (SAMPR_CAP_44)
|
|
|
|
/* define the bitmask of recording sample rates */
|
|
#define REC_SAMPR_CAPS (SAMPR_CAP_44)
|
|
|
|
/* define this if you have a bitmap LCD display */
|
|
#define HAVE_LCD_BITMAP
|
|
|
|
/* define this if you have a colour LCD */
|
|
#define HAVE_LCD_COLOR
|
|
|
|
/* define this if you want album art for this target */
|
|
#define HAVE_ALBUMART
|
|
|
|
/* define this to enable bitmap scaling */
|
|
#define HAVE_BMP_SCALING
|
|
|
|
/* define this to enable JPEG decoding */
|
|
#define HAVE_JPEG
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 220
|
|
#define LCD_HEIGHT 176
|
|
#define LCD_DEPTH 16 /* 65536 colours */
|
|
#define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 byte-swapped */
|
|
|
|
/* Define this if the LCD can shut down */
|
|
#define HAVE_LCD_SHUTDOWN
|
|
|
|
/* LCD stays visible without backlight - simulator hint */
|
|
#define HAVE_TRANSFLECTIVE_LCD
|
|
|
|
#define CONFIG_KEYPAD IPOD_4G_PAD
|
|
|
|
/* Define this to have CPU boosted while scrolling in the UI */
|
|
#define HAVE_GUI_BOOST
|
|
|
|
/* Define this to enable morse code input */
|
|
#define HAVE_MORSE_INPUT
|
|
|
|
/* Define this if you do software codec */
|
|
#define CONFIG_CODEC SWCODEC
|
|
|
|
/* define this if you have a real-time clock */
|
|
#define CONFIG_RTC RTC_PCF50605
|
|
|
|
/* Define if the device can wake from an RTC alarm */
|
|
#define HAVE_RTC_ALARM
|
|
|
|
/* Define this if you can switch on/off the accessory power supply */
|
|
#define HAVE_ACCESSORY_SUPPLY
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x100000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x80000
|
|
|
|
/* Define this if you have the WM8975 audio codec */
|
|
#define HAVE_WM8975
|
|
|
|
#define AB_REPEAT_ENABLE
|
|
#define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
|
|
|
|
/* define this if you have a disk storage, i.e. something
|
|
that needs spinups and can cause skips when shaked */
|
|
#define HAVE_DISK_STORAGE
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
#define HAVE_BACKLIGHT_BRIGHTNESS
|
|
|
|
/* Main LCD backlight brightness range and defaults */
|
|
#define MIN_BRIGHTNESS_SETTING 1
|
|
#define MAX_BRIGHTNESS_SETTING 31
|
|
#define DEFAULT_BRIGHTNESS_SETTING 20
|
|
|
|
/* define this if the unit uses a scrollwheel for navigation */
|
|
#define HAVE_SCROLLWHEEL
|
|
/* define to activate advanced wheel acceleration code */
|
|
#define HAVE_WHEEL_ACCELERATION
|
|
/* define from which rotation speed [degree/sec] on the acceleration starts */
|
|
#define WHEEL_ACCEL_START 270
|
|
/* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
|
|
#define WHEEL_ACCELERATION 3
|
|
|
|
/* Define this if you can detect headphones */
|
|
#define HAVE_HEADPHONE_DETECTION
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 700 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 700 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 1200 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 10 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
|
|
|
|
/* Hardware controlled charging? */
|
|
#define CONFIG_CHARGING CHARGING_MONITOR
|
|
|
|
/* define this if the unit can be powered or charged via USB */
|
|
#define HAVE_USB_POWER
|
|
|
|
/* define this if the unit can have USB charging disabled by user -
|
|
* if USB/MAIN power is discernable and hardware doesn't compel charging */
|
|
#define HAVE_USB_CHARGING_ENABLE
|
|
|
|
/* define current usage levels */
|
|
#define CURRENT_NORMAL 69 /* ~10h (700mAh), see FS#9072 */
|
|
#define CURRENT_BACKLIGHT 20 /* FIXME: this needs adjusting */
|
|
#if defined(HAVE_RECORDING)
|
|
#define CURRENT_RECORD 35 /* FIXME: this needs adjusting */
|
|
#endif
|
|
|
|
/* Define Apple remote tuner */
|
|
#define CONFIG_TUNER IPOD_REMOTE_TUNER
|
|
#define HAVE_RDS_CAP
|
|
|
|
/* Define this if you have a PortalPlayer PP5020 */
|
|
#define CONFIG_CPU PP5020
|
|
|
|
/* Define this if you want to use the PP5020 i2c interface */
|
|
#define CONFIG_I2C I2C_PP5020
|
|
|
|
/* We're able to shut off power to the HDD */
|
|
#define HAVE_ATA_POWER_OFF
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
//#define HAVE_POWEROFF_WHILE_CHARGING
|
|
|
|
/* The start address index for ROM builds */
|
|
#define ROM_START 0x00000000
|
|
|
|
/* The size of the flash ROM */
|
|
#define FLASH_SIZE 0x100000
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 11289600
|
|
|
|
#define CONFIG_LCD LCD_IPODCOLOR
|
|
|
|
/* Offset ( in the firmware file's header ) to the file length */
|
|
#define FIRMWARE_OFFSET_FILE_LENGTH 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the real data */
|
|
#define FIRMWARE_OFFSET_FILE_DATA 8
|
|
|
|
/* USB On-the-go */
|
|
#define CONFIG_USBOTG USBOTG_ARC
|
|
|
|
/* enable these for the experimental usb stack */
|
|
#define HAVE_USBSTACK
|
|
#define USE_ROCKBOX_USB
|
|
#define USB_VENDOR_ID 0x05ac
|
|
#define USB_PRODUCT_ID 0x1204
|
|
#define HAVE_USB_HID_MOUSE
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
#define HAVE_ADJUSTABLE_CPU_FREQ
|
|
|
|
/* Define this if you can read an absolute wheel position */
|
|
#define HAVE_WHEEL_POSITION
|
|
|
|
#define HAVE_HARDWARE_CLICK
|
|
|
|
#define BOOTFILE_EXT "ipod"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
#define ICODE_ATTR_TREMOR_NOT_MDCT
|
|
|
|
#define IPOD_ACCESSORY_PROTOCOL
|
|
#define HAVE_SERIAL
|
|
|
|
|
|
/* DMA is used only for reading on PP502x because although reads are ~8x faster
|
|
* writes appear to be ~25% slower.
|
|
*/
|
|
/* Switched off due to reported instabilities. #define HAVE_ATA_DMA */
|
|
|
|
/* Define this, if you can switch on/off the lineout */
|
|
#define HAVE_LINEOUT_POWEROFF
|
|
|
|
/* Define this if a programmable hotkey is mapped */
|
|
#define HAVE_HOTKEY
|