391 lines
11 KiB
C
391 lines
11 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2008 by Michael Sevakis
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "config.h"
|
|
#include "system.h"
|
|
#include "string.h"
|
|
#include "button.h"
|
|
#include "lcd.h"
|
|
#include "font.h"
|
|
#include "debug-target.h"
|
|
#include "mc13783.h"
|
|
#include "adc.h"
|
|
#include "ccm-imx31.h"
|
|
#include "dvfs_dptc-imx31.h"
|
|
#include <stdio.h>
|
|
|
|
bool dbg_hw_info(void)
|
|
{
|
|
int line;
|
|
unsigned int pllref;
|
|
unsigned int mcu_pllfreq, ser_pllfreq, usb_pllfreq;
|
|
uint32_t mpctl, spctl, upctl;
|
|
unsigned int freq;
|
|
uint32_t regval;
|
|
|
|
extern volatile unsigned int dvfs_nr_dn, dvfs_nr_up,
|
|
dvfs_nr_pnc, dvfs_nr_no;
|
|
extern volatile unsigned int dptc_nr_dn, dptc_nr_up,
|
|
dptc_nr_pnc, dptc_nr_no;
|
|
|
|
lcd_clear_display();
|
|
lcd_setfont(FONT_SYSFIXED);
|
|
|
|
while (1)
|
|
{
|
|
line = 0;
|
|
lcd_putsf(0, line++, "Sys Rev Code: 0x%02X", iim_system_rev());
|
|
line++;
|
|
|
|
mpctl = CCM_MPCTL;
|
|
spctl = CCM_SPCTL;
|
|
upctl = CCM_UPCTL;
|
|
|
|
pllref = ccm_get_pll_ref_clk_rate();
|
|
|
|
mcu_pllfreq = ccm_calc_pll_rate(pllref, mpctl);
|
|
ser_pllfreq = ccm_calc_pll_rate(pllref, spctl);
|
|
usb_pllfreq = ccm_calc_pll_rate(pllref, upctl);
|
|
|
|
lcd_putsf(0, line++, "pll_ref_clk: %u", pllref);
|
|
line++;
|
|
|
|
/* MCU clock domain */
|
|
lcd_putsf(0, line++, "MPCTL: %08lX", mpctl);
|
|
|
|
lcd_putsf(0, line++, " mpl_dpdgck_clk: %u", mcu_pllfreq);
|
|
line++;
|
|
|
|
regval = CCM_PDR0;
|
|
lcd_putsf(0, line++, " PDR0: %08lX", regval);
|
|
|
|
freq = mcu_pllfreq / (((regval & 0x7) + 1));
|
|
lcd_putsf(0, line++, " mcu_clk: %u", freq);
|
|
|
|
freq = mcu_pllfreq / (((regval >> 11) & 0x7) + 1);
|
|
lcd_putsf(0, line++, " hsp_clk: %u", freq);
|
|
|
|
freq = mcu_pllfreq / (((regval >> 3) & 0x7) + 1);
|
|
lcd_putsf(0, line++, " hclk_clk: %u", freq);
|
|
|
|
lcd_putsf(0, line++, " ipg_clk: %u",
|
|
freq / (unsigned)(((regval >> 6) & 0x3) + 1));
|
|
|
|
lcd_putsf(0, line++, " nfc_clk: %u",
|
|
freq / (unsigned)(((regval >> 8) & 0x7) + 1));
|
|
|
|
line++;
|
|
|
|
/* Serial clock domain */
|
|
lcd_putsf(0, line++, "SPCTL: %08lX", spctl);
|
|
lcd_putsf(0, line++, " spl_dpdgck_clk: %u", ser_pllfreq);
|
|
|
|
line++;
|
|
|
|
/* USB clock domain */
|
|
lcd_putsf(0, line++, "UPCTL: %08lX", upctl);
|
|
|
|
lcd_putsf(0, line++, " upl_dpdgck_clk: %u", usb_pllfreq);
|
|
|
|
regval = CCM_PDR1;
|
|
lcd_putsf(0, line++, " PDR1: %08lX", regval);
|
|
|
|
freq = usb_pllfreq /
|
|
((((regval >> 30) & 0x3) + 1) * (((regval >> 27) & 0x7) + 1));
|
|
lcd_putsf(0, line++, " usb_clk: %u", freq);
|
|
|
|
freq = usb_pllfreq / (((CCM_PDR0 >> 16) & 0x1f) + 1);
|
|
lcd_putsf(0, line++, " ipg_per_baud: %u", freq);
|
|
|
|
line++;
|
|
lcd_putsf(0, line++, "PMCR0: %08lX", CCM_PMCR0);
|
|
|
|
line++;
|
|
lcd_putsf(0, line++, "cpu_frequency: %ld Hz", cpu_frequency);
|
|
|
|
lcd_putsf(0, line++, "dvfs_level: %u", dvfs_get_level());
|
|
lcd_putsf(0, line++, "dvfs d|u|p|n: %u %u %u %u",
|
|
dvfs_nr_dn, dvfs_nr_up, dvfs_nr_pnc, dvfs_nr_no);
|
|
regval = dvfs_dptc_get_voltage();
|
|
lcd_putsf(0, line++, "cpu_voltage: %d.%03d V", regval / 1000,
|
|
regval % 1000);
|
|
|
|
lcd_putsf(0, line++, "dptc_wp: %u", dptc_get_wp());
|
|
lcd_putsf(0, line++, "dptc d|u|p|n: %u %u %u %u",
|
|
dptc_nr_dn, dptc_nr_up, dptc_nr_pnc, dptc_nr_no);
|
|
lcd_putsf(0, line++, "DVCR0,1: %08lX %08lX", CCM_DCVR0, CCM_DCVR1);
|
|
lcd_putsf(0, line++, "DVCR2,3: %08lX %08lX", CCM_DCVR2, CCM_DCVR3);
|
|
lcd_putsf(0, line++, "SWITCHERS0: %08lX", mc13783_read(MC13783_SWITCHERS0));
|
|
lcd_putsf(0, line++, "SWITCHERS1: %08lX", mc13783_read(MC13783_SWITCHERS1));
|
|
|
|
lcd_update();
|
|
|
|
if (button_get_w_tmo(HZ/10) == (DEBUG_CANCEL|BUTTON_REL))
|
|
return false;
|
|
}
|
|
}
|
|
|
|
bool dbg_ports(void)
|
|
{
|
|
int line;
|
|
int i;
|
|
|
|
static const char pmic_regset[] =
|
|
{
|
|
MC13783_INTERRUPT_STATUS0,
|
|
MC13783_INTERRUPT_SENSE0,
|
|
MC13783_INTERRUPT_STATUS1,
|
|
MC13783_INTERRUPT_SENSE1,
|
|
MC13783_CHARGER,
|
|
MC13783_RTC_TIME,
|
|
MC13783_RTC_ALARM,
|
|
MC13783_RTC_DAY,
|
|
MC13783_RTC_DAY_ALARM,
|
|
};
|
|
|
|
static const char *pmic_regnames[ARRAYLEN(pmic_regset)] =
|
|
{
|
|
"Int Stat0 ",
|
|
"Int Sense0",
|
|
"Int Stat1 ",
|
|
"Int Sense1",
|
|
"Charger ",
|
|
"RTC Time ",
|
|
"RTC Alarm ",
|
|
"RTC Day ",
|
|
"RTC Day Al",
|
|
};
|
|
|
|
uint32_t pmic_regs[ARRAYLEN(pmic_regset)];
|
|
|
|
lcd_clear_display();
|
|
lcd_setfont(FONT_SYSFIXED);
|
|
|
|
while(1)
|
|
{
|
|
line = 0;
|
|
lcd_puts(0, line++, "[Ports and Registers]");
|
|
line++;
|
|
|
|
/* GPIO1 */
|
|
lcd_putsf(0, line++, "GPIO1: DR: %08lx GDIR: %08lx", GPIO1_DR, GPIO1_GDIR);
|
|
|
|
lcd_putsf(0, line++, " PSR: %08lx ICR1: %08lx", GPIO1_PSR, GPIO1_ICR1);
|
|
|
|
lcd_putsf(0, line++, " ICR2: %08lx IMR: %08lx", GPIO1_ICR2, GPIO1_IMR);
|
|
|
|
lcd_putsf(0, line++, " ISR: %08lx", GPIO1_ISR);
|
|
line++;
|
|
|
|
/* GPIO2 */
|
|
lcd_putsf(0, line++, "GPIO2: DR: %08lx GDIR: %08lx", GPIO2_DR, GPIO2_GDIR);
|
|
|
|
lcd_putsf(0, line++, " PSR: %08lx ICR1: %08lx", GPIO2_PSR, GPIO2_ICR1);
|
|
|
|
lcd_putsf(0, line++, " ICR2: %08lx IMR: %08lx", GPIO2_ICR2, GPIO2_IMR);
|
|
|
|
lcd_putsf(0, line++, " ISR: %08lx", GPIO2_ISR);
|
|
line++;
|
|
|
|
/* GPIO3 */
|
|
lcd_putsf(0, line++, "GPIO3: DR: %08lx GDIR: %08lx", GPIO3_DR, GPIO3_GDIR);
|
|
|
|
lcd_putsf(0, line++, " PSR: %08lx ICR1: %08lx", GPIO3_PSR, GPIO3_ICR1);
|
|
|
|
lcd_putsf(0, line++, " ICR2: %08lx IMR: %08lx", GPIO3_ICR2, GPIO3_IMR);
|
|
|
|
lcd_putsf(0, line++, " ISR: %08lx", GPIO3_ISR);
|
|
line++;
|
|
|
|
lcd_puts(0, line++, "PMIC Registers");
|
|
line++;
|
|
|
|
mc13783_read_regs(pmic_regset, pmic_regs, ARRAYLEN(pmic_regs));
|
|
|
|
for (i = 0; i < (int)ARRAYLEN(pmic_regs); i++)
|
|
{
|
|
lcd_putsf(0, line++, "%s: %08lx", pmic_regnames[i], pmic_regs[i]);
|
|
}
|
|
|
|
line++;
|
|
|
|
lcd_puts(0, line++, "ADC");
|
|
line++;
|
|
|
|
for (i = 0; i < NUM_ADC_CHANNELS; i += 4)
|
|
{
|
|
lcd_putsf(0, line++,
|
|
"CH%02d:%04u CH%02d:%04u CH%02d:%04u CH%02d:%04u",
|
|
i+0, adc_read(i+0),
|
|
i+1, adc_read(i+1),
|
|
i+2, adc_read(i+2),
|
|
i+3, adc_read(i+3));
|
|
}
|
|
|
|
lcd_update();
|
|
if (button_get_w_tmo(HZ/10) == (DEBUG_CANCEL|BUTTON_REL))
|
|
return false;
|
|
}
|
|
}
|
|
|
|
|
|
bool __dbg_dvfs_dptc(void)
|
|
{
|
|
int ltwlevel;
|
|
unsigned long ltdetect;
|
|
int dvfs_wp, dvfs_mask;
|
|
bool dptc_on;
|
|
int i;
|
|
char buf[32];
|
|
unsigned long ltw[4];
|
|
bool ltwassert[4];
|
|
|
|
lcd_clear_display();
|
|
lcd_setfont(FONT_SYSFIXED);
|
|
|
|
dvfs_mask = dvfs_level_mask();
|
|
|
|
dvfs_wp = dvfs_enabled() ? -1 : (int)dvfs_get_level();
|
|
dptc_on = dptc_enabled();
|
|
dvfs_get_gp_sense(<wlevel, <detect);
|
|
|
|
while (1)
|
|
{
|
|
int line = 0;
|
|
|
|
int button = button_get_w_tmo(HZ/10);
|
|
|
|
if (dvfs_wp < 0)
|
|
strcpy(buf, "Auto");
|
|
else
|
|
snprintf(buf, sizeof(buf), "%d", dvfs_wp);
|
|
|
|
lcd_puts(0, line, "[DVFS/DPTC]");
|
|
line += 2;
|
|
lcd_putsf(0, line, "CPU freq. point (Up/Dn) : %s", buf);
|
|
line += 2;
|
|
lcd_putsf(0, line, "DPTC volt. scale (Play) : %s",
|
|
dptc_on ? "Enabled" : "Disabled");
|
|
line += 2;
|
|
lcd_putsf(0, line, "GP load level (Vol +/-) : %d", ltwlevel);
|
|
line += 2;
|
|
lcd_puts(0, line, "----------------------------------------");
|
|
line += 2;
|
|
lcd_putsf(0, line++, "Frequency: %dHz", cpu_frequency);
|
|
i = dvfs_dptc_get_voltage();
|
|
lcd_putsf(0, line++, "Voltage : %d.%03d V", i / 1000, i % 1000);
|
|
|
|
for (i = 0; i <= 3; i++)
|
|
{
|
|
ltw[i] = dvfs_get_lt_weight(i + DVFS_LT_SIG_DVGP0);
|
|
ltwassert[i] = dvfs_get_gp_bit(i + DVFS_DVGP_0);
|
|
}
|
|
|
|
lcd_putsf(0, line++, "GPW (3-0): %lu%lu%lu%lu %c%c%c%c",
|
|
ltw[3], ltw[2], ltw[1], ltw[0],
|
|
ltwassert[3] ? 'y' : 'n',
|
|
ltwassert[2] ? 'y' : 'n',
|
|
ltwassert[1] ? 'y' : 'n',
|
|
ltwassert[0] ? 'y' : 'n');
|
|
|
|
line += 2;
|
|
lcd_puts(8, line, "(Press SELECT to revert)");
|
|
|
|
switch (button)
|
|
{
|
|
case DEBUG_CANCEL|BUTTON_REL:
|
|
return false;
|
|
|
|
/* CPU frequency */
|
|
case BUTTON_UP:
|
|
if (++dvfs_wp >= DVFS_NUM_LEVELS)
|
|
{
|
|
/* Going back to automatic */
|
|
dvfs_wp = -1;
|
|
dvfs_start();
|
|
}
|
|
else
|
|
{
|
|
if (dvfs_wp == 0)
|
|
{
|
|
/* Going to manual setting */
|
|
dvfs_stop();
|
|
}
|
|
|
|
/* Skip gaps in mask */
|
|
while (((1 << dvfs_wp) & dvfs_mask) == 0) dvfs_wp++;
|
|
dvfs_set_level(dvfs_wp);
|
|
}
|
|
|
|
break;
|
|
|
|
case BUTTON_DOWN:
|
|
if (--dvfs_wp == -1)
|
|
{
|
|
/* Going back to automatic */
|
|
dvfs_start();
|
|
}
|
|
else
|
|
{
|
|
if (dvfs_wp <= -2)
|
|
{
|
|
/* Going to manual setting */
|
|
dvfs_stop();
|
|
dvfs_wp = DVFS_NUM_LEVELS - 1;
|
|
}
|
|
|
|
/* Skip gaps in mask */
|
|
while (((1 << dvfs_wp) & dvfs_mask) == 0) dvfs_wp--;
|
|
dvfs_set_level(dvfs_wp);
|
|
}
|
|
break;
|
|
|
|
/* GP Load tracking */
|
|
case BUTTON_VOL_UP:
|
|
if (ltwlevel < 28)
|
|
dvfs_set_gp_sense(++ltwlevel, ltdetect);
|
|
break;
|
|
|
|
case BUTTON_VOL_DOWN:
|
|
if (ltwlevel > 0)
|
|
dvfs_set_gp_sense(--ltwlevel, ltdetect);
|
|
break;
|
|
|
|
case BUTTON_PLAY:
|
|
dptc_on = !dptc_enabled();
|
|
dptc_on ? dptc_start() : dptc_stop();
|
|
break;
|
|
|
|
case BUTTON_SELECT:
|
|
dvfs_start();
|
|
dptc_start();
|
|
dvfs_set_gp_sense(-1, 0);
|
|
|
|
dvfs_wp = dvfs_enabled() ? -1 : (int)dvfs_get_level();
|
|
dptc_on = dptc_enabled();
|
|
dvfs_get_gp_sense(<wlevel, <detect);
|
|
break;
|
|
}
|
|
|
|
lcd_update();
|
|
yield();
|
|
}
|
|
}
|