237 lines
6.8 KiB
C
237 lines
6.8 KiB
C
/*
|
|
* This config file is for the Sandisk Sansa Fuze v2
|
|
*/
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 68
|
|
#define MODEL_NAME "Sandisk Sansa Fuze v2"
|
|
/* Define if boot data from bootloader has been enabled for the target */
|
|
#define HAVE_BOOTDATA
|
|
|
|
/* define boot redirect file name allows booting from external drives */
|
|
#define BOOT_REDIR "rockbox_main.fuze2"
|
|
|
|
#define HW_SAMPR_CAPS SAMPR_CAP_ALL
|
|
|
|
/* define this if you have recording possibility */
|
|
#define HAVE_RECORDING
|
|
|
|
#define REC_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
|
|
SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
|
|
SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
|
|
|
|
/* because the samplerates don't match at each point, we must be able to
|
|
* tell PCM which set of rates to use. not needed if recording rates are
|
|
* a simple subset of playback rates and are equal values. */
|
|
#define CONFIG_SAMPR_TYPES
|
|
|
|
/* Default recording levels */
|
|
#define DEFAULT_REC_MIC_GAIN 23
|
|
#define DEFAULT_REC_LEFT_GAIN 23
|
|
#define DEFAULT_REC_RIGHT_GAIN 23
|
|
|
|
/* Define bitmask of input sources - recordable bitmask can be defined
|
|
explicitly if different */
|
|
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
|
|
|
|
/* define this if you have a bitmap LCD display */
|
|
#define HAVE_LCD_BITMAP
|
|
/* define this if you have a colour LCD */
|
|
#define HAVE_LCD_COLOR
|
|
|
|
#ifndef BOOTLOADER/* define this if you want album art for this target */
|
|
#define HAVE_ALBUMART
|
|
|
|
/* define this to enable bitmap scaling */
|
|
#define HAVE_BMP_SCALING
|
|
|
|
/* define this to enable JPEG decoding */
|
|
#define HAVE_JPEG
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* define this if you have LCD enable function */
|
|
#define HAVE_LCD_ENABLE
|
|
|
|
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
|
|
should be defined as well.
|
|
#define HAVE_LCD_SLEEP
|
|
#define HAVE_LCD_SLEEP_SETTING
|
|
*/
|
|
|
|
/* define this if you can flip your LCD */
|
|
#define HAVE_LCD_FLIP
|
|
|
|
/* define this if you can invert the colours on your LCD */
|
|
#define HAVE_LCD_INVERT
|
|
|
|
#ifndef BOOTLOADER
|
|
/* define this if you have a real-time clock */
|
|
#define CONFIG_RTC RTC_AS3514
|
|
|
|
/* Define if the device can wake from an RTC alarm */
|
|
#define HAVE_RTC_ALARM
|
|
#endif
|
|
|
|
/* There is no hardware tone control */
|
|
#define HAVE_SW_TONE_CONTROLS
|
|
|
|
/* define this if the unit uses a scrollwheel for navigation */
|
|
#define HAVE_SCROLLWHEEL
|
|
/* define to activate advanced wheel acceleration code */
|
|
#define HAVE_WHEEL_ACCELERATION
|
|
/* define from which rotation speed [degree/sec] on the acceleration starts */
|
|
#define WHEEL_ACCEL_START 720
|
|
/* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
|
|
#define WHEEL_ACCELERATION 1
|
|
|
|
#endif /* !BOOTLOADER */
|
|
|
|
/* put the lcd frame buffer in IRAM */
|
|
#define IRAM_LCDFRAMEBUFFER //IBSS_ATTR
|
|
|
|
#define CONFIG_KEYPAD SANSA_FUZE_PAD
|
|
|
|
/* Define this to have CPU boosted while scrolling in the UI */
|
|
#define HAVE_GUI_BOOST
|
|
|
|
/* Define this to enable morse code input */
|
|
#define HAVE_MORSE_INPUT
|
|
|
|
/* Define this if you do software codec */
|
|
#define CONFIG_CODEC SWCODEC
|
|
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 220
|
|
#define LCD_HEIGHT 176
|
|
/* sqrt(220^2 + 176^2) / 2.2 = 128.1 */
|
|
#define LCD_DPI 128
|
|
#define LCD_DEPTH 16 /* 65536 colours */
|
|
#define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 swapped */
|
|
|
|
|
|
/* AS3514 or newer */
|
|
#define HAVE_AS3514
|
|
#define HAVE_AS3543
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* Some Sansa Fuzes seem to be FAT16 formatted */
|
|
#define HAVE_FAT16SUPPORT
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE (0x100000-0x8000)
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x80000
|
|
|
|
#define AB_REPEAT_ENABLE
|
|
|
|
/* FM Tuner - suspected to be the SI4702 */
|
|
#define CONFIG_TUNER (SI4700|RDA5802)
|
|
/* #define HAVE_TUNER_PWR_CTRL */
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
#define HAVE_BACKLIGHT_BRIGHTNESS
|
|
|
|
/* Main LCD backlight brightness range and defaults */
|
|
#define MIN_BRIGHTNESS_SETTING 1
|
|
#define MAX_BRIGHTNESS_SETTING 12
|
|
#define DEFAULT_BRIGHTNESS_SETTING 6
|
|
|
|
/* define this if you have a light associated with the buttons */
|
|
#define HAVE_BUTTON_LIGHT
|
|
|
|
/* Which backlight fading type? */
|
|
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
|
|
|
|
/* define this if you have a flash memory storage */
|
|
#define HAVE_FLASH_STORAGE
|
|
|
|
/* define this if the flash memory uses the SecureDigital Memory Card protocol */
|
|
#define CONFIG_STORAGE STORAGE_SD
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 550 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 550 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 550 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
|
|
|
|
/* Charging implemented in a target-specific algorithm */
|
|
#define CONFIG_CHARGING CHARGING_TARGET
|
|
|
|
/* define this if the unit can be powered or charged via USB */
|
|
#define HAVE_USB_POWER
|
|
|
|
/* Define this if you have an AMS AS3525v2 */
|
|
#define CONFIG_CPU AS3525v2
|
|
|
|
/* Define this if you want to use the AS2525 i2c interface */
|
|
#define CONFIG_I2C I2C_AS3525
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
#define HAVE_POWEROFF_WHILE_CHARGING
|
|
|
|
/* define current usage levels (based on battery bench) */
|
|
#define CURRENT_NORMAL 11
|
|
#define CURRENT_BACKLIGHT 30
|
|
#define CURRENT_RECORD CURRENT_NORMAL
|
|
|
|
/* maximum charging current */
|
|
#define CURRENT_MAX_CHG 200
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 192000000
|
|
|
|
/* Type of LCD */
|
|
#define CONFIG_LCD LCD_FUZE
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC and data. These are
|
|
only used when loading the old format rockbox.e200 file */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0x0
|
|
#define FIRMWARE_OFFSET_FILE_DATA 0x8
|
|
|
|
#define HAVE_MULTIDRIVE
|
|
#define NUM_DRIVES 2
|
|
|
|
#ifndef BOOTLOADER
|
|
#define HAVE_HOTSWAP
|
|
#endif
|
|
|
|
/* USB On-the-go */
|
|
#define CONFIG_USBOTG USBOTG_DESIGNWARE
|
|
/* logf() over USB serial (http://www.rockbox.org/wiki/PortalPlayerUsb) */
|
|
//#define USB_ENABLE_SERIAL
|
|
|
|
/* enable these for the experimental usb stack */
|
|
#define HAVE_USBSTACK
|
|
#define USB_VENDOR_ID 0x0781
|
|
#define USB_PRODUCT_ID 0x74c3 /* MSC = 0x74c3, MTP = 0x74c2 */
|
|
#define HAVE_BOOTLOADER_USB_MODE
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
#define HAVE_ADJUSTABLE_CPU_FREQ
|
|
|
|
/*define this to enable CPU voltage scaling on AMS devices*/
|
|
#define HAVE_ADJUSTABLE_CPU_VOLTAGE
|
|
|
|
#define BOOTFILE_EXT "sansa"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
#define ICODE_ATTR_TREMOR_NOT_MDCT
|
|
|
|
#define INCLUDE_TIMEOUT_API
|
|
|
|
/* Define this if a programmable hotkey is mapped */
|
|
#define HAVE_HOTKEY
|