bitchx/aclocal.m4

1650 lines
61 KiB
Plaintext

# Configure paths for AUDIOFILE
# Bertrand Guiheneuf 98-10-21
# stolen from esd.m4 in esound :
# Manish Singh 98-9-30
# stolen back from Frank Belew
# stolen from Manish Singh
# Shamelessly stolen from Owen Taylor
dnl AM_PATH_AUDIOFILE([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for AUDIOFILE, and define AUDIOFILE_CFLAGS and AUDIOFILE_LIBS
dnl
AC_DEFUN(AM_PATH_AUDIOFILE,
[dnl
dnl Get the cflags and libraries from the audiofile-config script
dnl
AC_ARG_WITH(audiofile-prefix,[ --with-audiofile-prefix=PFX
Prefix where AUDIOFILE is installed (optional)],
audiofile_prefix="$withval", audiofile_prefix="")
AC_ARG_WITH(audiofile-exec-prefix,[ --with-audiofile-exec-prefix=PFX
Exec prefix where AUDIOFILE is installed (optional)],
audiofile_exec_prefix="$withval", audiofile_exec_prefix="")
AC_ARG_ENABLE(audiofiletest, [ --disable-audiofiletest
Do not try to compile and run a test AUDIOFILE program],
, enable_audiofiletest=yes)
if test x$audiofile_exec_prefix != x ; then
audiofile_args="$audiofile_args --exec-prefix=$audiofile_exec_prefix"
if test x${AUDIOFILE_CONFIG+set} != xset ; then
AUDIOFILE_CONFIG=$audiofile_exec_prefix/bin/audiofile-config
fi
fi
if test x$audiofile_prefix != x ; then
audiofile_args="$audiofile_args --prefix=$audiofile_prefix"
if test x${AUDIOFILE_CONFIG+set} != xset ; then
AUDIOFILE_CONFIG=$audiofile_prefix/bin/audiofile-config
fi
fi
AC_PATH_PROG(AUDIOFILE_CONFIG, audiofile-config, no)
min_audiofile_version=ifelse([$1], ,0.2.5,$1)
AC_MSG_CHECKING(for AUDIOFILE - version >= $min_audiofile_version)
no_audiofile=""
if test "$AUDIOFILE_CONFIG" = "no" ; then
no_audiofile=yes
else
AUDIOFILE_LIBS=`$AUDIOFILE_CONFIG $audiofileconf_args --libs`
AUDIOFILE_CFLAGS=`$AUDIOFILE_CONFIG $audiofileconf_args --cflags`
audiofile_major_version=`$AUDIOFILE_CONFIG $audiofile_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
audiofile_minor_version=`$AUDIOFILE_CONFIG $audiofile_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
audiofile_micro_version=`$AUDIOFILE_CONFIG $audiofile_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
if test "x$enable_audiofiletest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $AUDIOFILE_CFLAGS"
LIBS="$LIBS $AUDIOFILE_LIBS"
dnl
dnl Now check if the installed AUDIOFILE is sufficiently new. (Also sanity
dnl checks the results of audiofile-config to some extent
dnl
rm -f conf.audiofiletest
AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <audiofile.h>
char*
my_strdup (char *str)
{
char *new_str;
if (str)
{
new_str = malloc ((strlen (str) + 1) * sizeof(char));
strcpy (new_str, str);
}
else
new_str = NULL;
return new_str;
}
int main ()
{
int major, minor, micro;
char *tmp_version;
system ("touch conf.audiofiletest");
/* HP/UX 9 (%@#!) writes to sscanf strings */
tmp_version = my_strdup("$min_audiofile_version");
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
printf("%s, bad version string\n", "$min_audiofile_version");
exit(1);
}
if (($audiofile_major_version > major) ||
(($audiofile_major_version == major) && ($audiofile_minor_version > minor)) ||
(($audiofile_major_version == major) && ($audiofile_minor_version == minor) && ($audiofile_micro_version >= micro)))
{
return 0;
}
else
{
printf("\n*** 'audiofile-config --version' returned %d.%d.%d, but the minimum version\n", $audiofile_major_version, $audiofile_minor_version, $audiofile_micro_version);
printf("*** of AUDIOFILE required is %d.%d.%d. If audiofile-config is correct, then it is\n", major, minor, micro);
printf("*** best to upgrade to the required version.\n");
printf("*** If audiofile-config was wrong, set the environment variable AUDIOFILE_CONFIG\n");
printf("*** to point to the correct copy of audiofile-config, and remove the file\n");
printf("*** config.cache before re-running configure\n");
return 1;
}
}
],, no_audiofile=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_audiofile" = x ; then
AC_MSG_RESULT(yes)
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
if test "$AUDIOFILE_CONFIG" = "no" ; then
echo "*** The audiofile-config script installed by AUDIOFILE could not be found"
echo "*** If AUDIOFILE was installed in PREFIX, make sure PREFIX/bin is in"
echo "*** your path, or set the AUDIOFILE_CONFIG environment variable to the"
echo "*** full path to audiofile-config."
else
if test -f conf.audiofiletest ; then
:
else
echo "*** Could not run AUDIOFILE test program, checking why..."
CFLAGS="$CFLAGS $AUDIOFILE_CFLAGS"
LIBS="$LIBS $AUDIOFILE_LIBS"
AC_TRY_LINK([
#include <stdio.h>
#include <audiofile.h>
], [ return 0; ],
[ echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding AUDIOFILE or finding the wrong"
echo "*** version of AUDIOFILE. If it is not finding AUDIOFILE, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
[ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occured. This usually means AUDIOFILE was incorrectly installed"
echo "*** or that you have moved AUDIOFILE since it was installed. In the latter case, you"
echo "*** may want to edit the audiofile-config script: $AUDIOFILE_CONFIG" ])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
AUDIOFILE_CFLAGS=""
AUDIOFILE_LIBS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(AUDIOFILE_CFLAGS)
AC_SUBST(AUDIOFILE_LIBS)
rm -f conf.audiofiletest
])
dnl AC_CHKDECL(pretty, unpretty, regexp, header)
dnl Copyright (c) David Walluck 2000
dnl All rights reserved.
AC_DEFUN(AC_CHECK_DECLARATION, [
AC_CACHE_CHECK(for $1 in $4, ac_cv_$2_declared, [
AC_EGREP_HEADER($3, $4, ac_cv_$2_declared="yes", ac_cv_$2_declared="no",)
])
if test x"$ac_cv_$2_declared" = x"yes"; then
AC_DEFINE($5, 1, Define this if $2 is declared in $4.)
fi
])
dnl AC_CHECK_VERSION(UPPER, lower, pretty, version)
dnl Copyright (c) David Walluck 1999-2000
dnl All rights reserved.
dnl Parts of this taken from mc configure script.
dnl Released under the GPLv2.
AC_DEFUN(AC_CHECK_VERSION,
[ AC_CACHE_CHECK(for $3 version, ac_cv_$3_version,
[ $1_version="unknown"
cat > conftest.$ac_ext <<EOF
[#]line __oline__ "configure"
#include "confdefs.h"
#include <$2.h>
#undef VERSION
VERSION:$1_VERSION
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&AS_MESSAGE_LOG_FD([]) | egrep "VERSION:" >conftest.out 2>&1; then
changequote(,)dnl
$2_version="`cat conftest.out | sed -e 's/^[^"]*"//' -e 's/".*//'`"
changequote([,])dnl
fi
rm -rf conftest*
ac_cv_$3_version="$$2_version"
])])
# Configure paths for ESD
# Manish Singh 98-9-30
# stolen back from Frank Belew
# stolen from Manish Singh
# Shamelessly stolen from Owen Taylor
dnl AM_PATH_ESD([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for ESD, and define ESD_CFLAGS and ESD_LIBS
dnl
AC_DEFUN(AM_PATH_ESD,
[dnl
dnl Get the cflags and libraries from the esd-config script
dnl
AC_ARG_WITH(esd-prefix,[ --with-esd-prefix=PFX Prefix where ESD is installed (optional)],
esd_prefix="$withval", esd_prefix="")
AC_ARG_WITH(esd-exec-prefix,[ --with-esd-exec-prefix=PFX
Exec prefix where ESD is installed (optional)],
esd_exec_prefix="$withval", esd_exec_prefix="")
AC_ARG_ENABLE(esdtest, [ --disable-esdtest Do not try to compile and run a test ESD program],
, enable_esdtest=yes)
if test x$esd_exec_prefix != x ; then
esd_args="$esd_args --exec-prefix=$esd_exec_prefix"
if test x${ESD_CONFIG+set} != xset ; then
ESD_CONFIG=$esd_exec_prefix/bin/esd-config
fi
fi
if test x$esd_prefix != x ; then
esd_args="$esd_args --prefix=$esd_prefix"
if test x${ESD_CONFIG+set} != xset ; then
ESD_CONFIG=$esd_prefix/bin/esd-config
fi
fi
AC_PATH_PROG(ESD_CONFIG, esd-config, no)
min_esd_version=ifelse([$1], ,0.2.7,$1)
AC_MSG_CHECKING(for ESD - version >= $min_esd_version)
no_esd=""
if test "$ESD_CONFIG" = "no" ; then
no_esd=yes
else
ESD_CFLAGS=`$ESD_CONFIG $esdconf_args --cflags`
ESD_LIBS=`$ESD_CONFIG $esdconf_args --libs`
esd_major_version=`$ESD_CONFIG $esd_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
esd_minor_version=`$ESD_CONFIG $esd_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
esd_micro_version=`$ESD_CONFIG $esd_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
if test "x$enable_esdtest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $ESD_CFLAGS"
LIBS="$LIBS $ESD_LIBS"
dnl
dnl Now check if the installed ESD is sufficiently new. (Also sanity
dnl checks the results of esd-config to some extent
dnl
rm -f conf.esdtest
AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <esd.h>
char*
my_strdup (char *str)
{
char *new_str;
if (str)
{
new_str = malloc ((strlen (str) + 1) * sizeof(char));
strcpy (new_str, str);
}
else
new_str = NULL;
return new_str;
}
int main ()
{
int major, minor, micro;
char *tmp_version;
system ("touch conf.esdtest");
/* HP/UX 9 (%@#!) writes to sscanf strings */
tmp_version = my_strdup("$min_esd_version");
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
printf("%s, bad version string\n", "$min_esd_version");
exit(1);
}
if (($esd_major_version > major) ||
(($esd_major_version == major) && ($esd_minor_version > minor)) ||
(($esd_major_version == major) && ($esd_minor_version == minor) && ($esd_micro_version >= micro)))
{
return 0;
}
else
{
printf("\n*** 'esd-config --version' returned %d.%d.%d, but the minimum version\n", $esd_major_version, $esd_minor_version, $esd_micro_version);
printf("*** of ESD required is %d.%d.%d. If esd-config is correct, then it is\n", major, minor, micro);
printf("*** best to upgrade to the required version.\n");
printf("*** If esd-config was wrong, set the environment variable ESD_CONFIG\n");
printf("*** to point to the correct copy of esd-config, and remove the file\n");
printf("*** config.cache before re-running configure\n");
return 1;
}
}
],, no_esd=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_esd" = x ; then
AC_MSG_RESULT(yes)
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
if test "$ESD_CONFIG" = "no" ; then
echo "*** The esd-config script installed by ESD could not be found"
echo "*** If ESD was installed in PREFIX, make sure PREFIX/bin is in"
echo "*** your path, or set the ESD_CONFIG environment variable to the"
echo "*** full path to esd-config."
else
if test -f conf.esdtest ; then
:
else
echo "*** Could not run ESD test program, checking why..."
CFLAGS="$CFLAGS $ESD_CFLAGS"
LIBS="$LIBS $ESD_LIBS"
AC_TRY_LINK([
#include <stdio.h>
#include <esd.h>
], [ return 0; ],
[ echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding ESD or finding the wrong"
echo "*** version of ESD. If it is not finding ESD, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
[ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occured. This usually means ESD was incorrectly installed"
echo "*** or that you have moved ESD since it was installed. In the latter case, you"
echo "*** may want to edit the esd-config script: $ESD_CONFIG" ])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
ESD_CFLAGS=""
ESD_LIBS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(ESD_CFLAGS)
AC_SUBST(ESD_LIBS)
rm -f conf.esdtest
])
# Configure paths for GLIB
# Owen Taylor 97-11-3
dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or
dnl gthread is specified in MODULES, pass to glib-config
dnl
AC_DEFUN(AM_PATH_GLIB,
[dnl
dnl Get the cflags and libraries from the glib-config script
dnl
AC_ARG_WITH(glib-prefix,[ --with-glib-prefix=PFX Prefix where GLIB is installed (optional)],
glib_config_prefix="$withval", glib_config_prefix="")
AC_ARG_WITH(glib-exec-prefix,[ --with-glib-exec-prefix=PFX
Exec prefix where GLIB is installed (optional)],
glib_config_exec_prefix="$withval", glib_config_exec_prefix="")
AC_ARG_ENABLE(glibtest, [ --disable-glibtest Do not try to compile and run a test GLIB program],
, enable_glibtest=yes)
if test x$glib_config_exec_prefix != x ; then
glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
if test x${GLIB_CONFIG+set} != xset ; then
GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config
fi
fi
if test x$glib_config_prefix != x ; then
glib_config_args="$glib_config_args --prefix=$glib_config_prefix"
if test x${GLIB_CONFIG+set} != xset ; then
GLIB_CONFIG=$glib_config_prefix/bin/glib-config
fi
fi
for module in . $4
do
case "$module" in
gmodule)
glib_config_args="$glib_config_args gmodule"
;;
gthread)
glib_config_args="$glib_config_args gthread"
;;
esac
done
AC_PATH_PROG(GLIB_CONFIG, glib-config, no)
min_glib_version=ifelse([$1], ,0.99.7,$1)
AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)
no_glib=""
if test "$GLIB_CONFIG" = "no" ; then
no_glib=yes
else
GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags`
GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs`
glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
if test "x$enable_glibtest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $GLIB_CFLAGS"
LIBS="$LIBS $GLIB_LIBS"
dnl
dnl Now check if the installed GLIB is sufficiently new. (Also sanity
dnl checks the results of glib-config to some extent
dnl
rm -f conf.glibtest
AC_TRY_RUN([
#include <glib.h>
#include <stdio.h>
#include <stdlib.h>
int
main ()
{
int major, minor, micro;
char *tmp_version;
system ("touch conf.glibtest");
/* HP/UX 9 (%@#!) writes to sscanf strings */
tmp_version = g_strdup("$min_glib_version");
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
printf("%s, bad version string\n", "$min_glib_version");
exit(1);
}
if ((glib_major_version != $glib_config_major_version) ||
(glib_minor_version != $glib_config_minor_version) ||
(glib_micro_version != $glib_config_micro_version))
{
printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n",
$glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
glib_major_version, glib_minor_version, glib_micro_version);
printf ("*** was found! If glib-config was correct, then it is best\n");
printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n");
printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
printf("*** required on your system.\n");
printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n");
printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n");
printf("*** before re-running configure\n");
}
else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
(glib_minor_version != GLIB_MINOR_VERSION) ||
(glib_micro_version != GLIB_MICRO_VERSION))
{
printf("*** GLIB header files (version %d.%d.%d) do not match\n",
GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
printf("*** library (version %d.%d.%d)\n",
glib_major_version, glib_minor_version, glib_micro_version);
}
else
{
if ((glib_major_version > major) ||
((glib_major_version == major) && (glib_minor_version > minor)) ||
((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
{
return 0;
}
else
{
printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
glib_major_version, glib_minor_version, glib_micro_version);
printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
major, minor, micro);
printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
printf("***\n");
printf("*** If you have already installed a sufficiently new version, this error\n");
printf("*** probably means that the wrong copy of the glib-config shell script is\n");
printf("*** being found. The easiest way to fix this is to remove the old version\n");
printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n");
printf("*** correct copy of glib-config. (In this case, you will have to\n");
printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
printf("*** so that the correct libraries are found at run-time))\n");
}
}
return 1;
}
],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_glib" = x ; then
AC_MSG_RESULT(yes)
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
if test "$GLIB_CONFIG" = "no" ; then
echo "*** The glib-config script installed by GLIB could not be found"
echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in"
echo "*** your path, or set the GLIB_CONFIG environment variable to the"
echo "*** full path to glib-config."
else
if test -f conf.glibtest ; then
:
else
echo "*** Could not run GLIB test program, checking why..."
CFLAGS="$CFLAGS $GLIB_CFLAGS"
LIBS="$LIBS $GLIB_LIBS"
AC_TRY_LINK([
#include <glib.h>
#include <stdio.h>
], [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
[ echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding GLIB or finding the wrong"
echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
echo "***"
echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
echo "*** came with the system with the command"
echo "***"
echo "*** rpm --erase --nodeps gtk gtk-devel" ],
[ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occured. This usually means GLIB was incorrectly installed"
echo "*** or that you have moved GLIB since it was installed. In the latter case, you"
echo "*** may want to edit the glib-config script: $GLIB_CONFIG" ])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
GLIB_CFLAGS=""
GLIB_LIBS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(GLIB_CFLAGS)
AC_SUBST(GLIB_LIBS)
rm -f conf.glibtest
])
dnl Configure paths for GNOME
dnl David Walluck 99-9-24
dnl AM_PATH_GNOME([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for GNOME, and define GNOME_CFLAGS and GNOME_LIBS
dnl
AC_DEFUN(AM_PATH_GNOME,
[dnl
dnl Get the cflags and libraries from the gnome-config script
dnl
AC_ARG_WITH(gnome-prefix,[ --with-gnome-prefix=PFX Prefix where GNOME is installed (optional)],
gnome_prefix="$withval", gnome_prefix="")
AC_ARG_WITH(gnome-exec-prefix,[ --with-gnome-exec-prefix=PFX
Exec prefix where GNOME is installed (optional)],
gnome_exec_prefix="$withval", gnome_exec_prefix="")
AC_ARG_ENABLE(gnometest, [ --disable-gnometest Do not try to compile and run a test GNOME program],
, enable_gnometest=yes)
if test x$gnome_exec_prefix != x ; then
gnome_args="$gnome_args --exec-prefix=$gnome_exec_prefix"
if test x${GNOME_CONFIG+set} != xset ; then
GNOME_CONFIG=$gnome_exec_prefix/bin/gnome-config
fi
fi
if test x$gnome_prefix != x ; then
gnome_args="$gnome_args --prefix=$gnome_prefix"
if test x${GNOME_CONFIG+set} != xset ; then
GNOME_CONFIG=$gnome_prefix/bin/gnome-config
fi
fi
AC_PATH_PROG(GNOME_CONFIG, gnome-config, no)
min_gnome_version=ifelse([$1], ,0.2.7,$1)
AC_MSG_CHECKING(for GNOME - version >= $min_gnome_version)
no_gnome=""
if test "$GNOME_CONFIG" = "no" ; then
no_gnome=yes
else
GNOME_CFLAGS=`$GNOME_CONFIG $gnomeconf_args gnome --cflags`
GNOME_LIBS=`$GNOME_CONFIG $gnomeconf_args gnome --libs`
gnome_major_version=`$GNOME_CONFIG $gnome_args --version | \
sed 's/gnome-libs //' | sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
gnome_minor_version=`$GNOME_CONFIG $gnome_args --version | \
sed 's/gnome-libs //' | sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
gnome_micro_version=`$GNOME_CONFIG $gnome_config_args --version | \
sed 's/gnome-libs //' | sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
if test "x$enable_gnometest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $GNOME_CFLAGS"
LIBS="$LIBS $GNOME_LIBS"
dnl
dnl Now check if the installed GNOME is sufficiently new. (Also sanity
dnl checks the results of gnome-config to some extent
dnl
rm -f conf.gnometest
AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <gnome.h>
int main ()
{
int major, minor, micro;
char *tmp_version;
system ("touch conf.gnometest");
/* HP/UX 9 (%@#!) writes to sscanf strings */
tmp_version = g_strdup("$min_gnome_version");
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
printf("%s, bad version string\n", "$min_gnome_version");
exit(1);
}
if (($gnome_major_version > major) ||
(($gnome_major_version == major) && ($gnome_minor_version > minor)) ||
(($gnome_major_version == major) && ($gnome_minor_version == minor) && ($gnome_micro_version >= micro)))
{
return 0;
}
else
{
printf("\n*** 'gnome-config --version' returned %d.%d.%d, but the minimum version\n", $gnome_major_version, $gnome_minor_version, $gnome_micro_version);
printf("*** of GNOME required is %d.%d.%d. If gnome-config is correct, then it is\n", major, minor, micro);
printf("*** best to upgrade to the required version.\n");
printf("*** If gnome-config was wrong, set the environment variable GNOME_CONFIG\n");
printf("*** to point to the correct copy of gnome-config, and remove the file\n");
printf("*** config.cache before re-running configure\n");
return 1;
}
}
],, no_gnome=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_gnome" = x ; then
AC_MSG_RESULT(yes)
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
if test "$GNOME_CONFIG" = "no" ; then
echo "*** The gnome-config script installed by GNOME could not be found"
echo "*** If GNOME was installed in PREFIX, make sure PREFIX/bin is in"
echo "*** your path, or set the GNOME_CONFIG environment variable to the"
echo "*** full path to gnome-config."
else
if test -f conf.gnometest ; then
:
else
echo "*** Could not run GNOME test program, checking why..."
CFLAGS="$CFLAGS $GNOME_CFLAGS"
LIBS="$LIBS $GNOME_LIBS"
AC_TRY_LINK([
#include <stdio.h>
#include <gnome.h>
], [ return 0; ],
[ echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding GNOME or finding the wrong"
echo "*** version of GNOME. If it is not finding GNOME, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
[ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occured. This usually means GNOME was incorrectly installed"
echo "*** or that you have moved GNOME since it was installed. In the latter case, you"
echo "*** may want to edit the gnome-config script: $GNOME_CONFIG" ])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
GNOME_CFLAGS=""
GNOME_LIBS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(GNOME_CFLAGS)
AC_SUBST(GNOME_LIBS)
rm -f conf.gnometest
])
# Configure paths for GTK+
# Owen Taylor 97-11-3
dnl AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
dnl Test for GTK, and define GTK_CFLAGS and GTK_LIBS
dnl
AC_DEFUN(AM_PATH_GTK,
[dnl
dnl Get the cflags and libraries from the gtk-config script
dnl
AC_ARG_WITH(gtk-prefix,[ --with-gtk-prefix=PFX Prefix where GTK is installed (optional)],
gtk_config_prefix="$withval", gtk_config_prefix="")
AC_ARG_WITH(gtk-exec-prefix,[ --with-gtk-exec-prefix=PFX
Exec prefix where GTK is installed (optional)],
gtk_config_exec_prefix="$withval", gtk_config_exec_prefix="")
AC_ARG_ENABLE(gtktest, [ --disable-gtktest Do not try to compile and run a test GTK program],
, enable_gtktest=yes)
for module in . $4
do
case "$module" in
gthread)
gtk_config_args="$gtk_config_args gthread"
;;
esac
done
if test x$gtk_config_exec_prefix != x ; then
gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
if test x${GTK_CONFIG+set} != xset ; then
GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
fi
fi
if test x$gtk_config_prefix != x ; then
gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
if test x${GTK_CONFIG+set} != xset ; then
GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
fi
fi
AC_PATH_PROG(GTK_CONFIG, gtk-config, no)
min_gtk_version=ifelse([$1], ,0.99.7,$1)
AC_MSG_CHECKING(for GTK - version >= $min_gtk_version)
no_gtk=""
if test "$GTK_CONFIG" = "no" ; then
no_gtk=yes
else
GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
if test "x$enable_gtktest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$LIBS $GTK_LIBS"
dnl
dnl Now check if the installed GTK is sufficiently new. (Also sanity
dnl checks the results of gtk-config to some extent
dnl
rm -f conf.gtktest
AC_TRY_RUN([
#include <gtk/gtk.h>
#include <stdio.h>
#include <stdlib.h>
int
main ()
{
int major, minor, micro;
char *tmp_version;
system ("touch conf.gtktest");
/* HP/UX 9 (%@#!) writes to sscanf strings */
tmp_version = g_strdup("$min_gtk_version");
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
printf("%s, bad version string\n", "$min_gtk_version");
exit(1);
}
if ((gtk_major_version != $gtk_config_major_version) ||
(gtk_minor_version != $gtk_config_minor_version) ||
(gtk_micro_version != $gtk_config_micro_version))
{
printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
$gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
gtk_major_version, gtk_minor_version, gtk_micro_version);
printf ("*** was found! If gtk-config was correct, then it is best\n");
printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
printf("*** required on your system.\n");
printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
printf("*** before re-running configure\n");
}
#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
(gtk_minor_version != GTK_MINOR_VERSION) ||
(gtk_micro_version != GTK_MICRO_VERSION))
{
printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
printf("*** library (version %d.%d.%d)\n",
gtk_major_version, gtk_minor_version, gtk_micro_version);
}
#endif /* defined (GTK_MAJOR_VERSION) ... */
else
{
if ((gtk_major_version > major) ||
((gtk_major_version == major) && (gtk_minor_version > minor)) ||
((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
{
return 0;
}
else
{
printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
gtk_major_version, gtk_minor_version, gtk_micro_version);
printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
major, minor, micro);
printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
printf("***\n");
printf("*** If you have already installed a sufficiently new version, this error\n");
printf("*** probably means that the wrong copy of the gtk-config shell script is\n");
printf("*** being found. The easiest way to fix this is to remove the old version\n");
printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n");
printf("*** correct copy of gtk-config. (In this case, you will have to\n");
printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
printf("*** so that the correct libraries are found at run-time))\n");
}
}
return 1;
}
],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_gtk" = x ; then
AC_MSG_RESULT(yes)
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
if test "$GTK_CONFIG" = "no" ; then
echo "*** The gtk-config script installed by GTK could not be found"
echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
echo "*** your path, or set the GTK_CONFIG environment variable to the"
echo "*** full path to gtk-config."
else
if test -f conf.gtktest ; then
:
else
echo "*** Could not run GTK test program, checking why..."
CFLAGS="$CFLAGS $GTK_CFLAGS"
LIBS="$LIBS $GTK_LIBS"
AC_TRY_LINK([
#include <gtk/gtk.h>
#include <stdio.h>
], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
[ echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding GTK or finding the wrong"
echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
echo "***"
echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
echo "*** came with the system with the command"
echo "***"
echo "*** rpm --erase --nodeps gtk gtk-devel" ],
[ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occured. This usually means GTK was incorrectly installed"
echo "*** or that you have moved GTK since it was installed. In the latter case, you"
echo "*** may want to edit the gtk-config script: $GTK_CONFIG" ])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
GTK_CFLAGS=""
GTK_LIBS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(GTK_CFLAGS)
AC_SUBST(GTK_LIBS)
rm -f conf.gtktest
])
# Configure paths for IMLIB
# Frank Belew 98-8-31
# stolen from Manish Singh
# Shamelessly stolen from Owen Taylor
dnl AM_PATH_IMLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for IMLIB, and define IMLIB_CFLAGS and IMLIB_LIBS
dnl
AC_DEFUN(AM_PATH_IMLIB,
[dnl
dnl Get the cflags and libraries from the imlib-config script
dnl
AC_ARG_WITH(imlib-prefix,[ --with-imlib-prefix=PFX Prefix where IMLIB is installed (optional)],
imlib_prefix="$withval", imlib_prefix="")
AC_ARG_WITH(imlib-exec-prefix,[ --with-imlib-exec-prefix=PFX
Exec prefix where IMLIB is installed (optional)],
imlib_exec_prefix="$withval", imlib_exec_prefix="")
AC_ARG_ENABLE(imlibtest, [ --disable-imlibtest Do not try to compile and run a test IMLIB program],
, enable_imlibtest=yes)
if test x$imlib_exec_prefix != x ; then
imlib_args="$imlib_args --exec-prefix=$imlib_exec_prefix"
if test x${IMLIB_CONFIG+set} != xset ; then
IMLIB_CONFIG=$imlib_exec_prefix/bin/imlib-config
fi
fi
if test x$imlib_prefix != x ; then
imlib_args="$imlib_args --prefix=$imlib_prefix"
if test x${IMLIB_CONFIG+set} != xset ; then
IMLIB_CONFIG=$imlib_prefix/bin/imlib-config
fi
fi
AC_PATH_PROG(IMLIB_CONFIG, imlib-config, no)
min_imlib_version=ifelse([$1], ,1.9.5,$1)
AC_MSG_CHECKING(for IMLIB - version >= $min_imlib_version)
no_imlib=""
if test "$IMLIB_CONFIG" = "no" ; then
no_imlib=yes
else
IMLIB_CFLAGS=`$IMLIB_CONFIG $imlibconf_args --cflags`
IMLIB_LIBS=`$IMLIB_CONFIG $imlibconf_args --libs`
imlib_major_version=`$IMLIB_CONFIG $imlib_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
imlib_minor_version=`$IMLIB_CONFIG $imlib_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
imlib_micro_version=`$IMLIB_CONFIG $imlib_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
if test "x$enable_imlibtest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $IMLIB_CFLAGS"
LIBS="$LIBS $IMLIB_LIBS"
dnl
dnl Now check if the installed IMLIB is sufficiently new. (Also sanity
dnl checks the results of imlib-config to some extent
dnl
rm -f conf.imlibtest
AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <Imlib.h>
char*
my_strdup (char *str)
{
char *new_str;
if (str)
{
new_str = malloc ((strlen (str) + 1) * sizeof(char));
strcpy (new_str, str);
}
else
new_str = NULL;
return new_str;
}
int main ()
{
int major, minor, micro;
char *tmp_version;
system ("touch conf.imlibtest");
/* HP/UX 9 (%@#!) writes to sscanf strings */
tmp_version = my_strdup("$min_imlib_version");
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
printf("%s, bad version string\n", "$min_imlib_version");
exit(1);
}
if (($imlib_major_version > major) ||
(($imlib_major_version == major) && ($imlib_minor_version > minor)) ||
(($imlib_major_version == major) && ($imlib_minor_version == minor) &&
($imlib_micro_version >= micro)))
{
return 0;
}
else
{
printf("\n*** 'imlib-config --version' returned %d.%d, but the minimum version\n", $imlib_major_version, $imlib_minor_version);
printf("*** of IMLIB required is %d.%d. If imlib-config is correct, then it is\n", major, minor);
printf("*** best to upgrade to the required version.\n");
printf("*** If imlib-config was wrong, set the environment variable IMLIB_CONFIG\n");
printf("*** to point to the correct copy of imlib-config, and remove the file\n");
printf("*** config.cache before re-running configure\n");
return 1;
}
}
],, no_imlib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_imlib" = x ; then
AC_MSG_RESULT(yes)
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
if test "$IMLIB_CONFIG" = "no" ; then
echo "*** The imlib-config script installed by IMLIB could not be found"
echo "*** If IMLIB was installed in PREFIX, make sure PREFIX/bin is in"
echo "*** your path, or set the IMLIB_CONFIG environment variable to the"
echo "*** full path to imlib-config."
else
if test -f conf.imlibtest ; then
:
else
echo "*** Could not run IMLIB test program, checking why..."
CFLAGS="$CFLAGS $IMLIB_CFLAGS"
LIBS="$LIBS $IMLIB_LIBS"
AC_TRY_LINK([
#include <stdio.h>
#include <Imlib.h>
], [ return 0; ],
[ echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding IMLIB or finding the wrong"
echo "*** version of IMLIB. If it is not finding IMLIB, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
[ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occured. This usually means IMLIB was incorrectly installed"
echo "*** or that you have moved IMLIB since it was installed. In the latter case, you"
echo "*** may want to edit the imlib-config script: $IMLIB_CONFIG" ])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
IMLIB_CFLAGS=""
IMLIB_LIBS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(IMLIB_CFLAGS)
AC_SUBST(IMLIB_LIBS)
rm -f conf.imlibtest
])
# Check for gdk-imlib
AC_DEFUN(AM_PATH_GDK_IMLIB,
[dnl
dnl Get the cflags and libraries from the imlib-config script
dnl
AC_ARG_WITH(imlib-prefix,[ --with-imlib-prefix=PFX Prefix where IMLIB is installed (optional)],
imlib_prefix="$withval", imlib_prefix="")
AC_ARG_WITH(imlib-exec-prefix,[ --with-imlib-exec-prefix=PFX
Exec prefix where IMLIB is installed (optional)],
imlib_exec_prefix="$withval", imlib_exec_prefix="")
AC_ARG_ENABLE(imlibtest, [ --disable-imlibtest Do not try to compile and run a test IMLIB program],
, enable_imlibtest=yes)
if test x$imlib_exec_prefix != x ; then
imlib_args="$imlib_args --exec-prefix=$imlib_exec_prefix"
if test x${IMLIB_CONFIG+set} != xset ; then
IMLIB_CONFIG=$imlib_exec_prefix/bin/imlib-config
fi
fi
if test x$imlib_prefix != x ; then
imlib_args="$imlib_args --prefix=$imlib_prefix"
if test x${IMLIB_CONFIG+set} != xset ; then
IMLIB_CONFIG=$imlib_prefix/bin/imlib-config
fi
fi
AC_PATH_PROG(IMLIB_CONFIG, imlib-config, no)
min_imlib_version=ifelse([$1], ,1.9.5,$1)
AC_MSG_CHECKING(for IMLIB - version >= $min_imlib_version)
no_imlib=""
if test "$IMLIB_CONFIG" = "no" ; then
no_imlib=yes
else
GDK_IMLIB_CFLAGS=`$IMLIB_CONFIG $imlibconf_args --cflags-gdk`
GDK_IMLIB_LIBS=`$IMLIB_CONFIG $imlibconf_args --libs-gdk`
imlib_major_version=`$IMLIB_CONFIG $imlib_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
imlib_minor_version=`$IMLIB_CONFIG $imlib_args --version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
if test "x$enable_imlibtest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $GDK_IMLIB_CFLAGS"
LIBS="$LIBS $GDK_IMLIB_LIBS"
dnl
dnl Now check if the installed IMLIB is sufficiently new. (Also sanity
dnl checks the results of imlib-config to some extent
dnl
rm -f conf.imlibtest
AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <gdk_imlib.h>
int main ()
{
int major, minor;
char *tmp_version;
system ("touch conf.gdkimlibtest");
/* HP/UX 9 (%@#!) writes to sscanf strings */
tmp_version = g_strdup("$min_imlib_version");
if (sscanf(tmp_version, "%d.%d", &major, &minor) != 2) {
printf("%s, bad version string\n", "$min_imlib_version");
exit(1);
}
if (($imlib_major_version > major) ||
(($imlib_major_version == major) && ($imlib_minor_version >= minor)))
{
return 0;
}
else
{
printf("\n*** 'imlib-config --version' returned %d.%d, but the minimum version\n", $imlib_major_version, $imlib_minor_version);
printf("*** of IMLIB required is %d.%d. If imlib-config is correct, then it is\n", major, minor);
printf("*** best to upgrade to the required version.\n");
printf("*** If imlib-config was wrong, set the environment variable IMLIB_CONFIG\n");
printf("*** to point to the correct copy of imlib-config, and remove the file\n");
printf("*** config.cache before re-running configure\n");
return 1;
}
}
],, no_imlib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_imlib" = x ; then
AC_MSG_RESULT(yes)
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
if test "$IMLIB_CONFIG" = "no" ; then
echo "*** The imlib-config script installed by IMLIB could not be found"
echo "*** If IMLIB was installed in PREFIX, make sure PREFIX/bin is in"
echo "*** your path, or set the IMLIB_CONFIG environment variable to the"
echo "*** full path to imlib-config."
else
if test -f conf.gdkimlibtest ; then
:
else
echo "*** Could not run IMLIB test program, checking why..."
CFLAGS="$CFLAGS $GDK_IMLIB_CFLAGS"
LIBS="$LIBS $GDK_IMLIB_LIBS"
AC_TRY_LINK([
#include <stdio.h>
#include <gdk_imlib.h>
], [ return 0; ],
[ echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding IMLIB or finding the wrong"
echo "*** version of IMLIB. If it is not finding IMLIB, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
[ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occured. This usually means IMLIB was incorrectly installed"
echo "*** or that you have moved IMLIB since it was installed. In the latter case, you"
echo "*** may want to edit the imlib-config script: $IMLIB_CONFIG" ])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
IMLIB_CFLAGS=""
IMLIB_LIBS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(GDK_IMLIB_CFLAGS)
AC_SUBST(GDK_IMLIB_LIBS)
rm -f conf.gdkimlibtest
])
dnl AC_CHECK_PLUGINS
dnl Copyright (c) David Walluck 1999-2000
dnl All rights reserved.
AC_DEFUN(AC_CHECK_PLUGINS,
[ if test x"$addl_plugins" != x"none"; then
if test x"`echo $addl_plugins | grep all`" != x""; then
one_plugins="`sed -n -e '/^#PLUGINS = /s///p' -e '/^#PLUGINS/q' < $srcdir/dll/Makefile.in`"
two_plugins="`echo "$addl_plugins" | sed 's/all//g'`"
addl_plugins="$one_plugins $two_plugins"
fi
for plugin in $addl_plugins; do
if test ! -d "$srcdir/dll/$plugin" -o -f "$srcdir/dll/$plugin.c"; then
AC_MSG_ERROR(plugin directory "$srcdir/dll/$plugin" or file "$srcdir/dll/$plugin.c" not found)
fi
# start of sound plugin stuff
if test x"$checked_sound_plugins" != x"1"; then
if test x"$plugin" = x"amp" -o x"$plugin" = x"wavplay"; then
checked_sound_plugins=1
AC_CHECK_HEADERS(machine/soundcard.h linux/soundcard.h sys/soundcard.h)
if test x"$ac_cv_header_machine_soundcard_h" = x"no" -a x"$ac_cv_header_linux_soundcard_h" = x"no" -a x"$ac_cv_header_sys_soundcard_h" = x"no"; then
noamp=1
nowavplay=1
fi
AC_CHECK_FUNC(mlock, , noamp=1)
fi
if test x"$noamp" = x"1"; then
addl_plugins="`echo "$addl_plugins" | sed 's/amp//g'`"
fi
if test x"$nowavplay" = x"1"; then
addl_plugins="`echo "$addl_plugins" | sed 's/wavplay//g'`"
fi
fi
# end of sound plugin stuff
if test x"$plugin" = x"xmms"; then
if test x"$checked_xmms_plugin" != x"1"; then
checked_xmms_plugin=1
AM_PATH_XMMS(0.9.5.1, AC_CHECK_LIB(c_r, pthread_attr_init, LIBS="$LIBS -lc_r",), addl_plugins="`echo "$addl_plugins" | sed 's/xmms//g'`")
fi
fi
if test x"$plugin" = x"europa"; then
if test x"$checked_europa_plugin" != x"1"; then
checked_europa_plugin=1
AC_CHECK_HEADER(mysql/mysql.h)
AC_CHECK_LIB(mysqlclient, mysql_query, MYSQL_LIBS="-lmysqlclient", addl_plugins="`echo "$addl_plugins" | sed 's/europa//g'`")
if test x"$ac_cv_header_mysql_mysql_h" = x"no"; then
addl_plugins="`echo "$addl_plugins" | sed 's/europa//g'`"
fi
AC_SUBST(MYSQL_LIBS)
fi
fi
done
fi
PLUGINS="`echo "$addl_plugins" | sed 's/ / /g'`"
AC_MSG_CHECKING(which plugins to build)
AC_MSG_RESULT($PLUGINS)
if test x"$PLUGINS" = x"none"; then
PLUGINS=""
fi
AC_SUBST(PLUGINS)
AC_DEFINE(HAVE_DLLIB, 1, Define this if you want loadable module support.)
AH_VERBATIM([WANT_DLL],
[/*
* Define this if you have shlib support and want plugin support in BitchX
* Note: Not all systems support this.
*/
#ifdef HAVE_DLLIB
#define WANT_DLL
#endif])
])
dnl AC_CHECK_PLUGIN_SUPPORT
dnl Copyright (c) David Walluck 2000
dnl All rights reserved.
AC_DEFUN(AC_CHECK_PLUGIN_SUPPORT,
[ if test x"$plugins" != x"0"; then
AC_CHECK_HEADER(dlfcn.h)
AC_CACHE_CHECK(for system version, ac_cv_system_version,
[ if test -f "/usr/lib/NextStep/software_version"; then
system=NEXTSTEP-"`$AWK '/3/,/3/' /usr/lib/NextStep/software_version`"
else
system="`uname -s`-`uname -r`"
if test -z "$system"; then
AC_MSG_RESULT(unknown \(can't find uname command\))
system="unknown"
else
if test -r "/etc/.relid" -a x"`uname -n`" = x"`uname -s`"; then
system="MP-RAS-`$AWK '{print $[3]}' /etc/.relid`"
fi
fi
fi
ac_cv_system_version="$system"
])
dnl I really wish I could ditch all of this in favor of libtool
case "$ac_cv_system_version" in
AIX*)
SHLIB_LD="ld -shared"
;;
BSD/OS-2* | BSD/OS-3*)
SHLIB_LD="ld -r"
;;
BSD/OS-4*)
SHLIB_LD="$CC -shared"
;;
HP-UX-*9* | HP-UX-*10* | HP-UX-*11*)
SHLIB_CFLAGS="+Z"
SHLIB_LD="ld"
SHLIB_SUFFIX=".sl"
;;
IRIX*32*)
SHLIB_LD="ld -shared -32"
;;
IRIX*64*)
SHLIB_LD="ld -shared -64"
;;
Linux*)
SHLIB_CFLAGS="-fPIC"
;;
MP-RAS-02*)
SHLIB_CFLAGS="-KPIC"
SHLIB_LD="$CC -G"
;;
MP-RAS-*)
SHLIB_CFLAGS="-KPIC"
SHLIB_LD="$CC -G"
LDFLAGS="$LDFLAGS -Wl,-Bexport"
;;
NetBSD*)
SHLIB_CFLAGS="-fPIC"
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
SHLIB_LD="ld -Bshareable"
else
SHLIB_LD="ld -shared"
fi
;;
FreeBSD-1.*)
dnl It sucks that I to have to do this.
AC_MSG_ERROR(sorry, no plugins on $ac_cv_system_version)
;;
FreeBSD-2.*)
SHLIB_LD="ld -Bshareable"
;;
FreeBSD*)
SHLIB_CFLAGS="-fPIC"
SHLIB_LD="$CC -shared"
;;
OpenBSD*)
SHLIB_CFLAGS="-fPIC"
SHLIB_LD="$CC -shared"
;;
BSDI*)
SHLIB_CFLAGS="-fPIC"
SHLIB_LD="$CC -shared"
;;
NEXTSTEP*)
SHLIB_LD="$CC -nostdlib -r"
;;
OSF1-1.0 | OSF1-1.1 | OSF1-1.2)
SHLIB_LD="ld -R -export \$(PLUGIN_NAME)"
;;
OSF1-1*)
SHLIB_CFLAGS="-fpic"
SHLIB_LD="ld -shared"
;;
OSF1-V*)
SHLIB_LD="ld -shared -expect_unresolved \*"
;;
OSF3* | OSF4*)
SHLIB_LD="ld -shared -expect_unresolved \*"
;;
SCO_SV-3.2*)
SHLIB_CFLAGS="-Kpic -belf"
SHLIB_LD="ld -G"
LDFLAGS="ldFLAGS -belf -Wl,-Bexport"
;;
SINIX*5.4*)
SHLIB_CFLAGS="-K PIC"
SHLIB_LD="$CC -G"
;;
Solaris*)
if test x"$GCC" = x"yes"; then
SHLIB_LD="ld -shared"
else
SHLIB_CFLAGS="-KPIC"
SHLIB_LD="$CC -shared"
fi
;;
SunOS-4*)
if test x"$GCC" = x"yes"; then
SHLIB_LD="ld -shared"
else
SHLIB_CFLAGS="-PIC"
SHLIB_LD="$CC"
fi
;;
SunOS-5*)
if test x"$GCC" = x"yes"; then
SHLIB_LD="ld -shared"
else
SHLIB_CFLAGS="-KPIC"
SHLIB_LD="$CC"
fi
;;
UNIX_SV* | SYSTEM_V* | DYNIX/ptx*)
SHLIB_CFLAGS="-KPIC"
SHLIB_LD="$CC -G"
hold_ldflags="$LDFLAGS"
AC_TRY_LINK(, , [
LDFLAGS="-Wl,-Bexport"
AC_MSG_RESULT(yes)
], [
AC_MSG_RESULT(no)
LD_FLAGS="$hold_ldflags"
])
;;
CYGWIN*)
SHLIB_SUFFIX=".dll"
SHLIB_LD="dllwrap --export-all --output-def \$(PLUGIN_NAME).def --implib lib\$(PLUGIN_NAME).a --driver-name \$(CC)"
;;
OS/2*)
SHLIB_SUFFIX=".dll"
SHLIB_LD="$CC -Zdll -Zcrtdll -Zmt"
;;
*)
AC_MSG_WARN(couldn't determine plugin flags for your operatins system: $ac_cv_system_version. Check to see that "dll/Makefile" is correct and that you can actually build plugins.)
SHLIB_CFLAGS="-fPIC"
SHLIB_LD="$CC -shared"
SHLIB_SUFFIX=".so"
;;
esac
else
AC_MSG_RESULT(not building with plugin support - you will not be able to use plugins)
fi ])
#
# Check to make sure that the build environment is sane.
#
AC_DEFUN(AM_SANITY_CHECK,
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
echo timestamp > conftestfile
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
if test "[$]*" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftestfile`
fi
if test "[$]*" != "X $srcdir/configure conftestfile" \
&& test "[$]*" != "X conftestfile $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
alias in your environment])
fi
test "[$]2" = conftestfile
)
then
# Ok.
:
else
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
rm -f conftest*
AC_MSG_RESULT(yes)])
dnl AC_CHECK_SHLIB
dnl Copyright (c) David Walluck 1999
dnl All rights reserved.
AC_DEFUN(AC_CHECK_SHLIB,
[
AC_CHECK_LIB(dl, dlopen, LIBS="-ldl $LIBS", [
AC_CHECK_FUNC(dlopen,, [
AC_CHECK_LIB(dld, dld_link, LIBS="-ldld $LIBS", [
AC_CHECK_LIB(dld, shl_load, LIBS="$LIBS -ldld", AC_MSG_WARN(Cannot find dlopen.) [
])
])
])
])
])
# CFLAGS and library paths for XMMS
# written 15 December 1999 by Ben Gertzfield <che@debian.org>
dnl Usage:
dnl AM_PATH_XMMS([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl
dnl Example:
dnl AM_PATH_XMMS(0.9.5.1, , AC_MSG_ERROR([*** XMMS >= 0.9.5.1 not installed - please install first ***]))
dnl
dnl Defines XMMS_CFLAGS, XMMS_LIBS, XMMS_DATA_DIR, XMMS_PLUGIN_DIR,
dnl XMMS_VISUALIZATION_PLUGIN_DIR, XMMS_INPUT_PLUGIN_DIR,
dnl XMMS_OUTPUT_PLUGIN_DIR, XMMS_GENERAL_PLUGIN_DIR, XMMS_EFFECT_PLUGIN_DIR,
dnl and XMMS_VERSION for your plugin pleasure.
dnl
dnl XMMS_TEST_VERSION(AVAILABLE-VERSION, NEEDED-VERSION [, ACTION-IF-OKAY [, ACTION-IF-NOT-OKAY]])
AC_DEFUN(XMMS_TEST_VERSION, [
# Determine which version number is greater. Prints 2 to stdout if
# the second number is greater, 1 if the first number is greater,
# 0 if the numbers are equal.
# Written 15 December 1999 by Ben Gertzfield <che@debian.org>
# Revised 15 December 1999 by Jim Monty <monty@primenet.com>
AC_PROG_AWK
xmms_got_version=[` $AWK ' \
BEGIN { \
print vercmp(ARGV[1], ARGV[2]); \
} \
\
function vercmp(ver1, ver2, ver1arr, ver2arr, \
ver1len, ver2len, \
ver1int, ver2int, len, i, p) { \
\
ver1len = split(ver1, ver1arr, /\./); \
ver2len = split(ver2, ver2arr, /\./); \
\
len = ver1len > ver2len ? ver1len : ver2len; \
\
for (i = 1; i <= len; i++) { \
p = 1000 ^ (len - i); \
ver1int += ver1arr[i] * p; \
ver2int += ver2arr[i] * p; \
} \
\
if (ver1int < ver2int) \
return 2; \
else if (ver1int > ver2int) \
return 1; \
else \
return 0; \
}' $1 $2`]
if test $xmms_got_version -eq 2; then # failure
ifelse([$4], , :, $4)
else # success!
ifelse([$3], , :, $3)
fi
])
AC_DEFUN(AM_PATH_XMMS,
[
AC_ARG_WITH(xmms-prefix,[ --with-xmms-prefix=PFX Prefix where XMMS is installed (optional)],
xmms_config_prefix="$withval", xmms_config_prefix="")
AC_ARG_WITH(xmms-exec-prefix,[ --with-xmms-exec-prefix=PFX Exec prefix where XMMS is installed (optional)],
xmms_config_exec_prefix="$withval", xmms_config_exec_prefix="")
if test x$xmms_config_exec_prefix != x; then
xmms_config_args="$xmms_config_args --exec-prefix=$xmms_config_exec_prefix"
if test x${XMMS_CONFIG+set} != xset; then
XMMS_CONFIG=$xmms_config_exec_prefix/bin/xmms-config
fi
fi
if test x$xmms_config_prefix != x; then
xmms_config_args="$xmms_config_args --prefix=$xmms_config_prefix"
if test x${XMMS_CONFIG+set} != xset; then
XMMS_CONFIG=$xmms_config_prefix/bin/xmms-config
fi
fi
AC_PATH_PROG(XMMS_CONFIG, xmms-config, no)
min_xmms_version=ifelse([$1], ,0.9.5.1, $1)
if test "$XMMS_CONFIG" = "no"; then
no_xmms=yes
else
XMMS_CFLAGS=`$XMMS_CONFIG $xmms_config_args --cflags`
XMMS_LIBS=`$XMMS_CONFIG $xmms_config_args --libs`
XMMS_VERSION=`$XMMS_CONFIG $xmms_config_args --version`
XMMS_DATA_DIR=`$XMMS_CONFIG $xmms_config_args --data-dir`
XMMS_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --plugin-dir`
XMMS_VISUALIZATION_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args \
--visualization-plugin-dir`
XMMS_INPUT_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --input-plugin-dir`
XMMS_OUTPUT_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --output-plugin-dir`
XMMS_EFFECT_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --effect-plugin-dir`
XMMS_GENERAL_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --general-plugin-dir`
XMMS_TEST_VERSION($XMMS_VERSION, $min_xmms_version, ,no_xmms=version)
fi
AC_MSG_CHECKING(for XMMS - version >= $min_xmms_version)
if test "x$no_xmms" = x; then
AC_MSG_RESULT(yes)
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
if test "$XMMS_CONFIG" = "no" ; then
echo "*** The xmms-config script installed by XMMS could not be found."
echo "*** If XMMS was installed in PREFIX, make sure PREFIX/bin is in"
echo "*** your path, or set the XMMS_CONFIG environment variable to the"
echo "*** full path to xmms-config."
else
if test "$no_xmms" = "version"; then
echo "*** An old version of XMMS, $XMMS_VERSION, was found."
echo "*** You need a version of XMMS newer than $min_xmms_version."
echo "*** The latest version of XMMS is always available from"
echo "*** http://www.xmms.org/"
echo "***"
echo "*** If you have already installed a sufficiently new version, this error"
echo "*** probably means that the wrong copy of the xmms-config shell script is"
echo "*** being found. The easiest way to fix this is to remove the old version"
echo "*** of XMMS, but you can also set the XMMS_CONFIG environment to point to the"
echo "*** correct copy of xmms-config. (In this case, you will have to"
echo "*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf"
echo "*** so that the correct libraries are found at run-time)"
fi
fi
XMMS_CFLAGS=""
XMMS_LIBS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(XMMS_CFLAGS)
AC_SUBST(XMMS_LIBS)
AC_SUBST(XMMS_VERSION)
AC_SUBST(XMMS_DATA_DIR)
AC_SUBST(XMMS_PLUGIN_DIR)
AC_SUBST(XMMS_VISUALIZATION_PLUGIN_DIR)
AC_SUBST(XMMS_INPUT_PLUGIN_DIR)
AC_SUBST(XMMS_OUTPUT_PLUGIN_DIR)
AC_SUBST(XMMS_GENERAL_PLUGIN_DIR)
AC_SUBST(XMMS_EFFECT_PLUGIN_DIR)
])