# News This is solanum 1.0-dev. See LICENSE for licensing details (GPL v2). ## solanum-1.0 Includes changes from charybdis-4.1.3-dev. **This release includes breaking changes from charybdis 4.x.** Please pay close attention to bolded warnings in the full release notes below. ### build - Add `--with-asan` to configure to produce an ASan instrumented build ### server protocol - OPER is now propagated globally, as :operator OPER opername privset ### user - **Breaking:** invite-notify is now enabled by loading the invite-notify extension - Prioritise older, more important client capabilities for clients that can only accept one line of CAP LS - Add the solanum.chat/realhost vendor capability (provided by extensions/cap\_realhost) - Add the solanum.chat/identify-msg vendor capability (provided by extensions/identify\_msg) - Server-side aliases preserve protocol framing characters - Add the +G user mode for soft callerid (implicitly allow users with a common channel) - /invite no longer punches through callerid - invite-notify now works - Rejectcached users are now sent the reason of the ban that caused their reject in most cases - Rejectcache entries expire when their corresponding K-lines do - One-argument /stats and zero-argument /motd are no longer ratelimited - Channel bans don't see through IP spoofs - Global /names now respects userhost-in-names - The `$j` extban is no longer usable inside ban exceptions - TLSv1 connections are accepted. They can still be disabled using OpenSSL config if you don't want them. TLSv1 existing is not thought to be a threat to up-to-date clients. ### oper - **Breaking:** Kick immunity for override is now its own extension, override\_kick\_immunity - **Breaking:** /stats A output now follows the same format as other stats letters - **Breaking:** helpops now uses +h instead of +H - **Breaking:** sno\_whois and the spy\_ extensions have been removed - Opers now have their privset (identified by name) on remote servers - Oper-only umodes are refreshed after rehash and /grant - Extension modules can be reloaded - Override no longer spams about being enabled/disabled. It continues to spam on each use. - Add /testkline, which has the same syntax as /testline but doesn't check if the mask is ilined - /privs is now remote-capable and can respond with more than one line - Most commands now respect oper hiding - Massnotice (notice/privmsg to $$.../$#...) now alerts opers - Massnotice no longer imposes any restrictions on the target mask - /kline and /dline are hardened to invalid inputs - K/D-lines are more consistent about checking for encoded ipv4-in-ipv6 addresses - Add extensions/drain to reject new connections - Add extensions/filter to filter messages, parts and quits with a Hyperscan database - Add extensions/sasl\_usercloak to interpolate SASL account names into I-line spoofs ### conf - **Breaking:** Completely overhaul oper privs. All privset configs will need to be rewritten. See reference.conf for details. - Add the `kline_spoof_ip` I-line flag to make any spoof opaque to K-line matching - Add general::hide\_tkline\_duration to remove durations from user-visible ban reasons - Add general::hide\_opers, which behaves as if all opers have oper:hidden - Add general::post\_registration\_delay - Add general::tls\_ciphers\_oper\_only to hide TLS cipher details in /whois - Add channel::opmod\_send\_statusmsg to send messages allowed by +z to @#channel - Add class::max\_autoconn, with the behaviour of class::max\_number for servers prior to charybdis 4 - Add `secure {}` blocks. Networks listed in a secure block gain +Z and can match `need_ssl` I- and O-lines. - Remove general::kline\_delay - If m\_webirc is loaded, connections that try to use a webirc auth block as their I-line will be disconnected on registration ### misc - **Breaking:** WEBIRC now processes the "secure" option as specified by IRCv3. Web gateways that do not set this option will need to be updated or their connections will show as insecure. - Successfully changing IP with WEBIRC now drops an identd username ### code - Channel lists are now kept sorted. A for-loop macro, `ITER_COMM_CHANNELS`, is introduced to efficiently compare two such lists. ## charybdis-4.1.2 ### user - src/s\_user.c: don't corrupt usermodes on module unload/reload ## charybdis-4.1.1 ### security - Fix an issue with the PASS command and duplicate server instances. ### misc - Fix connection hang with blacklist/opm when ident is disabled. - Improve SASL CAP notification when the services server disconnects. - MbedTLS: Support ChaCha20-Poly1305 in default cipher suites. ## charybdis-4.1 ### misc - SCTP is now supported for server connections (and optionally, user connections) ## charybdis-4.0.1 ### server protocol - SJOIN messages were being constructed in a 1024 byte buffer and truncated to 512 bytes when sending. This caused channels with more than 50 users to fail to propagate all of them during a net join. ## charybdis-4.0 ### build - Build system has been converted to libtool + automake for sanity reasons. - The compile date is now set at configure time rather than build time, allowing for reproducible builds. (#148, #149) - Support for GNUTLS 3.4 has been added. ### user - Import the ability to exceed MAXCHANNELS from ircd-seven. - Implement IRCv3.2 enhanced capability negotiation (`CAP LS 302`). - Implement support for receiving and sending IRCv3 message tags. - Implement IRCv3.2 capabilities: (#141) - account-tag - echo-message - invite-notify - sasl - server-time - SASL: certificate fingerprints are now always sent to the SASL agent, allowing for the certificate to be used as a second authentication factor. ### oper - Merge several features from ircd-seven: - Implement support for remote DIE/RESTART. - Implement support for remote MODLOAD et al commands. - Add the GRANT command which allows for temporarily opering a client. - Implement the hidden oper-only channel modes framework. - Implement a channel mode that disallows kicking IRC operators (+M). - Enhance the oper override system, allowing more flexibility and detail in network-wide notices. - DNS, ident, and blacklist lookups have been moved to a dedicated daemon known as authd. Some cosmetic changes to blacklist statistics and rejection notices have resulted. - An experimental OPM scanner has been added to authd. Plaintext SOCKS4, SOCKS5, and HTTP CONNECT proxies can be checked for. - The LOCOPS command has been moved from core to an extension. - All core modules in charybdis have descriptions, which are shown in MODLIST. - Suffixes should not be used when doing /MODLOAD, /MODUNLOAD, /MODRELOAD, etc. ### misc - Support for WebSocket has been added, use the listen::wsock option to switch a listener into websocket mode. ### conf - Add the ability to strip color codes from topics unconditionally. - The obsolete hub option from server info has been removed. ### docs - The documentation has been cleaned up; obsolete files have been purged, and files have been renamed and shuffled around to be more consistent. ### code - `common.h` is gone. Everything useful in it was moved to `ircd_defs.h`. - `config.h` is gone; the few remaining knobs in it were not for configuration by mere mortals, and mostly existed as a 2.8 relic. Most of the knobs live in `defaults.h`, but one is well-advised to stay away unless they know exactly what they are doing. - A new module API has been introduced, known as AV2. It includes things such as module datecodes (to ensure modules don't fall out of sync with the code), module descriptions, and other fun things. - Alias and module commands are now in m_alias and m_modules, respectively, and can be reloaded if need be. For sanity reasons, m_modules is a core module, and cannot be unloaded. - irc_dictionary and irc_radixtree related functions are now in librb, and prefixed accordingly. Typedefs have been added for consistency with existing data structures. For example, now you would write `rb_dictionary *foo` and `RB_DICTIONARY_FOREACH`. - C99 bools are now included and used in the code. Don't use ints as simple true or false flags anymore. In accordance with this change, the `YES`/`NO` and `TRUE`/`FALSE` macros have been removed. - Return types from command handlers have been axed, as they have been useless for years. - libratbox has been renamed to librb, as we have diverged from upstream long ago. - Almost all 2.8-style hashtable structures have been moved to dictionaries or radix trees, resulting in significant memory savings. - The block allocator has been disabled and is no longer used. - The ratbox client capabilities have been ported to use the ircd capabilities framework, allowing for modules to provide capabilities. - Support for restarting ssld has been added. ssld processes which are still servicing clients will remain in use, but not service new connections, and are garbage collected when they are no longer servicing connections. - Support for ratbox-style 'iodebug' hooks has been removed. - New channel types may be added by modules, see `extensions/chantype_dummy.c` for a very simple example. ## charybdis-3.5.0 ### server protocol - Fix propagation of ip_cloaking hostname changes (only when setting or unsetting the umode after connection). - Fix a remote-triggerable crash triggered by the CAPAB parsing code. - As per the TS6 spec, require QS and ENCAP capabilities. - Require EX and IE capabilities (+e and +I cmodes). - Check that UIDs start with the server's SID. ### user - Allow mode queries on mlocked modes. In particular, allow /mode #channel f to query the forward channel even if +f is mlocked. - Strip colours from channel topics in /list. - If umode +D or +g are oper-only, don't advertise them in 005. - If MONITOR is not enabled, don't advertise it in 005. - Add starttls as per ircv3. - Abort a whowas listing when it would exceed SendQ, which would previously disconnect the user. - Reject nicks with '~' in them, rather than truncating at the '~'. - Remove CHARSET=ascii from ISUPPORT - Use the normal rules for IP visibility in /whowas. - Cmode +c now strips '\x0F' (^O, formatting off), fixing weird rendering in some clients that internally use mIRC formatting such as highlighted messages in HexChat. - Indicate join failure because of the chm_sslonly extension (cmode +S) using the same 480 numeric as ircd-ratbox. - Do not allow SASL authentication when the configured SASL agent is unavailable. - Automatically add unidentified users to the ACCEPT list when a user is set +R, as we do when the user is set +g. - Implement IRCv3.2 capabilities: - cap-notify - chghost - userhost-in-names - Implement the $&, $| and $m extban types: - $& combines 1 or more child extbans as an AND expression - $| combines 1 or more child extbans as an OR expression - $m provides normal hostmask matching as an extban for the above - Do not allow STARTTLS if a connection is already using TLS. - Display an operator's privilege set in WHOIS. - The $o extban now matches against privilege set names as well as individual privileges. Privilege set names are preferred over individual privileges. ### oper - Fix a crash with /testline. - Complain to opers if a server that isn't a service tries to SU/RSFNC/NICKDELAY/SVSLOGIN. - Turn off umode +p (override) when deopering. - Make listener error messages (e.g. port already in use) visible by default instead of only on snomask +d and in ioerrorlog. - Remove snotes on +r about GET/PUT/POST commands ("HTTP Proxy disconnected"). - Add DNSBL snotes on snomask +r. ### config - Add hide_uncommon_channels extension to hide uncommon channel memberships in WHOIS, like in ircd-seven. - Add chm_nonotice extension, cmode +T to reject notices. - Add restrict-unauthenticated extension, prevents unauthenticated users from doing anything as channel operator. - Add no_kill_services extension, prevents local opers from killing services. - Allow matching specific replies of DNSBLs, using the new matches option. - Remove blowfish crypt since it has the BSD advertising clause. - Fix SHA256 ($5$) crypt. - Make the channel::channel_target_change option actually work (it used to be always on). - SSL/TLS listeners now have defer_accept unconditionally enabled on them. - The method used for certificate fingerprints (CertFP) is now configurable. SHA1, SHA256 and SHA512 are available options. - The minimum user threshold for channels in default /list output is now configurable. ### misc - Work around timerfd/signalfd brokenness on OpenVZ. - Fix a compilation issue in libratbox/src/sigio.c with recent glibc. - Extend documentation slightly. - Remove a BSD advertising clause that permission was granted to remove. - Add support for hooking PRIVMSG/NOTICE. - Reenable and fix the GnuTLS support. - Add mbedTLS backend for SSL/TLS. - Remove EGD support. - Try other DNS servers if errors or corrupt replies are encountered. - Rename genssl.sh script to genssl. - Choose more secure SSL/TLS algorithms. - Fix reconnecting with SSL/TLS with some clients such as ChatZilla (see https://bugzilla.mozilla.org/show_bug.cgi?id=858394#c34 for details.) - Improve error messages about the configuration file. - Fix a crash when compiled with recent clang on 32-bit systems. - Fix various memory leaks in rehash. - Fix various code quality issues. - Add --with-shared-sqlite to allow distribution packages to link to a shared sqlite library. Using this is not recommended for on-server compilation. - ISUPPORT tokens which are actually provided by modules have been moved to their respective modules. ## charybdis-3.4.0 ### server protocol - Allow overriding opers (with the new extension) to op themselves on channels. - Allow RSFNC to change a nickname's capitalization only. - Add channel ban forwarding $ much like ircd-seven. Local use of this is controlled by the channel::use_forward config option. - Add ENCAP TGINFO to propagate IP addresses that exceeded target change limits (these get a lower limit when they reconnect). ### user - Consider bogus CTCP ACTION messages (without action text) CTCP (for cmode +C). - Send ERR_TOOMANYCHANNELS for each channel join that fails due to channel limits. - Add account-notify client capability to notify clients about logins and logouts of users in common channels. See doc/account-notify.txt. - Add extended-join client capability to add account name and ircname to JOIN. - Add topic TS and channel TS constraints for /LIST (T<, T>, C<, C> parameters as in some other servers). - Disallow wildcarded nicknames in "hunted" parameters like /stats and /motd. - Disallow mIRC italics in channel names when disable_fake_channels. - Add AUTHENTICATE EXTERNAL support, allows SASL authentication using a certificate fingerprint. - Allow channel::kick_on_split_riding to protect channels with mlocked keys. - The NICKLEN token in 005 now only specifies the maximum usable nick length. The MAXNICKLEN token specifies the maximum nick length any user can have. - Disallow $ in usernames as this may cause problems with ban forwarding. - Add an error message (numeric 743) if a ban mask is invalid. - Extract the underlying IPv4 address from 6to4 and Teredo IPv6 addresses. Show it in a remote /whois and check channel bans, quiets, D:lines and K:lines against it. Note that ban exceptions and auth{} blocks are not checked. - Allow normal users to perform /privs on themselves, showing some privileges from the auth{} block. - Add away-notify client capability, see doc/away-notify.txt. - Add rate limit for high-bandwidth commands, in particular /who . - Rate limit /away to help avoid flooding via away-notify. - Apply colour stripping (cmode +c) and CTCP checking (cmode +C) to messages to @/+ channel as well. - Channel mode +c (and other places that disallow colour codes) now also strip ASCII 4 (a different kind of colour code). ### oper - Add operspy for /list. - Add a server notice to snomask +b if a user exceeds target change limits. - Add missing server notice for kills from RSFNC and SVSLOGIN. - Add /stats C to show information about dynamically loaded server capabilities. ### config - Add support for linking using SSL certificate fingerprints as the link credential rather than the traditional password pair. - Add m_roleplay extension, provides various roleplay commands. - Add override extension, umode +p oper override for opers with oper:override permission, with accountability notices and timeout. Note that opers cannot op themselves if there are older servers on the network. - Add channel::disable_local_channels config option. - Add support for IPv6 DNSBLs. A new "type" option specifies the IP version(s) for which each DNSBL should be checked. - Make flood control settings configurable by those who know exactly what they are doing. - Add serverinfo::nicklen config option to limit the nick length for local users. Different values of this option do not break the server protocol. - Add extb_usermode extension, $m:+- extban matching against umodes. - Extend extb_oper extension to allow matching against oper privileges. - Add m_remove extension, /remove command as in ircd-seven. - Add general::away_interval to allow configuring /away rate limiting. - Add listener::defer_accept to delay accepting a connection until the client sends data. This depends on kernel support. It may break BOPM checking. ### misc - In mkpasswd, default to SHA512-based crypt instead of MD5-based crypt. - Add --with-custom-branding and --with-custom-version configure options to help forks/patchsets distinguish themselves. - Change version control from Mercurial to GIT. - Ensure SIGHUP and SIGINT keep working after a SIGINT restart. - Add --enable-fhs-paths configure option to allow installing into a more FHS-like hierarchy. - Remove broken GnuTLS support. SSL/TLS is now only provided using OpenSSL. ## charybdis-3.3.0 ### server protocol - Add new BAN command, for propagated network-wide bans (K/X:lines and RESVs). These will burst to new servers as they are introduced, and will stay in sync across the whole network (new BAN capab). - Add new MLOCK command, to implement ircd-side channel mode locks. This allows services to send out a list of mode letters for a given channel which may not be changed, preventing mode fights between services and client bots (new MLOCK capab). ### user - New RPL_QUIETLIST(728) and RPL_ENDOFQUIETLIST(729) numerics are used for the quiet (+q) list, instead of overloading the ban list numerics. - Users may no longer change the topic of a -t channel if they cannot send to it. - Add help for EXTBAN, describing the syntax of extended bans in general, as well as the most common types. - Changed AWAY messages are now propagated to other servers. Previously, AWAY was only propagated when the user was not already away. - Channel mode +c (and other places that disallow colour codes) now also strip ASCII 29 (mIRC 7 italics). - Add auto-accept for user mode +g (callerid): Messaging a user while set +g will automatically add them to your accept list. - Add target change for channels. It applies to unopped, unvoiced and unopered users. This has the effect of stopping spambots which join, message and part many channels at a time. - Show RPL_WHOISLOGGEDIN in /whowas as well as in /whois entries. This adds at most an additional 0.5MB of memory usage. ### config - Add general::use_propagated_bans to switch the new BAN system on or off. - Add general::default_ident_timeout, to control the timeout for identd (auth) connections. - Add channel::channel_target_change to switch the new channel target change limits on or off. - Fix class::number_per_ident so that it also applies to connections without identd. - Change the example sslport option to 6697, which is more standard than 9999. ### misc - The custom channel mode API has been rewritten, allowing these modules to work correctly when reloaded, or loaded from the config file. - The EFNet RBL is now recommended, instead of DroneBL. - Remove the unsupported modules directory. - Numerous bug fixes and code cleanups. - In mkpasswd, default to MD5 crypt instead of insecure DES. ## charybdis-3.2.0 ### server protocol - Apply +z to messages blocked by +b and +q as well. (new EOPMOD capab) - Add new topic command ETB, allowing services to set topic+setter+ts always. (new EOPMOD capab) - The slash ('/') character is now allowed in spoofs. ### user - Add can_kick hook, based on the ircd-seven one. - Add cmode +C (no CTCP) from ircd-seven. - Flood checking has been reworked. - Fix op-moderate (cmode +z) for channel names with '@'. - Add CERTFP support, allowing users to connect with an SSL client certificate and propagating the certificate fingerprint to other servers. Services packages can use this to identify users based on client certificates. - Maintain the list of recently used targets (for the target change anti-spam system) in most-recently-used order, overwriting the least recently used target with a new one. This should be friendlier to users without giving spambots anything. - Do not require target change slots for replying to the last five users to send a private message, notice or invite. - Apply target change restrictions to /invite. - Apply umode +g/+R restrictions to /invite, with the difference that instead of sending " is messaging you" the invite is let through since that is just as noisy. ### oper - Add /rehash throttles to clear throttling. - Send all server notices resulting from a remote /rehash to the oper. - '\s' for space is now part of the matching, not a substitution at xline time, fixing various issues with it. - Display o:line "nickname" in oper-up server notices. - Fix sendq exceeded snotes for servers. - SCAN UMODES: default list-max to 500, like a global WHO. - Ignore directory names in MODRELOAD to avoid crashing if it is a core module and the path is incorrect. - Tweaks to spambot checks. ### config - Add channel::only_ascii_channels config option to restrict channel names to printable ascii only. - Add channel::resv_forcepart, forcibly parts local users on channel RESV, default enabled. ### misc - New mkpasswd from ircd-ratbox. - Check more system calls for errors and handle the errors. - Various ssld/libratbox bugfixes from ircd-ratbox. [some MERGED] - Fix fd passing on FreeBSD/amd64 and possibly Solaris/sparc. [MERGED] - Various documentation improvements. [some MERGED] - Fix some crash issues. [MERGED] - Add bandb from ircd-ratbox, which stores permanent dlines/klines/xlines/resvs in an sqlite database instead of a flatfile and does the storage in a helper process. Use bin/bantool -i to import your old bans into the database. ## charybdis-3.1.0 - Remove TS5 support. No TS5 servers are permitted in a network with charybdis 3.1.0 or newer, except jupes. - Replace oper flags by privilege sets (privsets). This adds an extra level of indirection between oper flags and operator blocks. /stats O (capital O) shows the configured privsets. - Update libratbox and ssld from upstream and use it better. - Add auth_user to auth{}. This allows specifying a username:password instead of just a password in PASS, so that a fixed user@host is not necessary for a specific auth{} block. - Add need_ssl to auth{} and operator{}. This makes these blocks reject the user if not connected via SSL. - Allow modules to provide simple channel modes without parameter. - Remove restrictions on CNAME in the resolver. - Make the resolver remember nonresponsive nameservers. - Move nick collision notices from +s to +k. - Add additional information to various server notices about server connections. - Show throttle information in /stats t. - Show rejectcache and throttle information in /testline. - Show oper reason in /testline. - Allow opers to see other users' umodes with /mode . - SCAN UMODES GLOBAL NO-LIST MASK is no longer an operspy command. - Also apply floodcount to messages to remote clients (except services). - Remove user@server messages to local users. Sending such messages to remote servers is still possible, for securely messaging pseudoservers whether service{}'ed or not. The special oper-only syntax opers@server remains as well. - Allow /list on a named +p channel. A full /list already included +p channels. - Add operspy /topic. - For remote rehashes, send error messages to the requesting oper as well. - Disable autoconnect for a server with excessive TS delta. - Disallow invites to juped channels. - Warn about certain duplicate and redundant auth blocks. - Make PRIVMSG/NOTICE behave as CPRIVMSG/CNOTICE automatically if possible. - Allow +z messages from outside if a channel is -n. - Allow coloured part reasons in -c channels. - Add ircu-like WHOX support. This allows requesting specific information in /who and allows obtaining services login name for all users in a channel. XChat/Conspire use WHOX to update away status more efficiently. - Allow opers and shide_exempt users to see hopcounts even if flatten_links is on. - Rework ip_cloaking. - Add the IP address to userlog, as in ircd-ratbox 3.0. - Split cidr_bitlen into cidr_ipv4_bitlen and cidr_ipv6_bitlen. - Allow using ziplinks with SSL connections. This is not as efficient as using OpenSSL's built in compression, but also works with older versions of OpenSSL. - Fix an off by one error with zipstats processing, which could overwrite a variable with NULL causing a crash on some systems. - Document some extensions in charybdis-oper-guide. - Add more server protocol documentation. - Add m_sendbans extension, SENDBANS command to propagate xlines and resvs manually. - Add chm_sslonly extension, cmode +S for SSL/TLS only channels. - Add chm_operonly extension, cmode +O for IRCop only channels. - Add chm_adminonly extension, cmode +A for server admin only channels. - Various code cleanups. ## charybdis-3.0.4 - Fix a crash on certain recent versions of Ubuntu. - Allow 127.x.y.z for DNSBL replies instead of just 127.0.0.x. - Various documentation improvements. ## charybdis-3.0.3 - Fix IPv6 D:lines - Fix rejectcache and unknown_count. - Fix genssl.sh. - Fix ident for SSL/TLS connections. - Fix SSL/TLS bugs for servers with more than about 100 connections. - Small bugfixes. ## charybdis-3.0.2 - Improve OLIST extension error messages. - Improve some kline error checking. - Avoid timing out clients if we are still waiting for a DNSBL lookup. - Fix resolver hangs with epoll. - Fix compilation without zlib. ## charybdis-3.0.1 - Fix occasional hung clients with kqueue. - Fix a rare ssld crash. - Fix a bug that could cause incorrect connect failure reasons to be reported. - Make the IRCd work on MacOS X again. ## charybdis-3.0.0 - Port the IRCd to libratbox, which has improved our portability and allows us to reuse low-level code instead of maintaining our own. - Change configuration of maximum number of clients to ircd-ratbox 3 way. - Add adminwall from ircd-ratbox, as an extension. - Add client and server-to-server SSL, read example.conf for setup. - Replace servlink with ssld (also for ziplinks). - A new extban, $z, has been added for ssl users (extensions/extb_ssl.so). - A new compatibility channel mode, +R, has been added, it sets +q/-q $~a (extensions/chm_operonly_compat.so). This is similar to the +R seen in ircd-seven. - A new compatibility channel mode, +S, has been added, it sets +b/-b $~z (extensions/chm_sslonly_compat.so). - A new compatibility channel mode, +O, has been added, it sets +iI/-iI $o (extensions/chm_operonly_compat.so). - Add remote D:lines. Note that these are not enabled by default. - Remove EFnet-style G:lines. Noone appears to use these. - Remove idle time checking (auto disconnecting users idle too long). - Display a notice to clients when the IRCd is shut down using SIGTERM. - Some error messages have been clarified to enhance usability. - Close the link to servers that send invalid nicks (e.g. nicklen mismatches). Formerly the users were killed from the network. - Enable topicburst by default in connect{}. - Fix a potential desync which can happen with oper override. - Remove "deopped" flag (TS5 legacy). - Use 127.0.0.1 as nameserver if none can be found in /etc/resolv.conf. - Only accept 127.0.0.x as a dnsbl listing. - Change cloaking module (same as 2.2.1, different from 2.2.0). - Make some more server notices about failed remote connect attempts network wide. - Make some server notices about flooders and TS delta network wide. - Remove redundant " had been connected for