contd ideas cwtrx
This commit is contained in:
parent
1e42319bc0
commit
de2cf9e7c1
50
scratch.md
50
scratch.md
|
@ -2,55 +2,61 @@
|
|||
|
||||
## CWTRX
|
||||
|
||||
low-power portable (70cm) transceiver for short range CW contacts
|
||||
low-power portable (70cm) CW transceiver, for short range contacts
|
||||
|
||||
### general features
|
||||
|
||||
- supply 5..12 V, optimized for 5 V (USB)
|
||||
- power save mode with variable squelch (trimmer?)
|
||||
- power save mode with variable squelch (trimmer? electronic?)
|
||||
- beacon mode: call sign transmission unless squelch open, pause
|
||||
|
||||
### RF section
|
||||
|
||||
- at least 432000..432400 kHz, up to 438000 if possible
|
||||
- range limits settable for manual and automatic scans
|
||||
- antenna: socket? headphone cable? key cable?
|
||||
- TX: min 0.1 W, optional 0.5 and 2 W
|
||||
- RX: direct conversion or BFO (mechanical/electronic 100 Hz steps)
|
||||
- range limits selectable, valid for manual and automatic scans
|
||||
- antenna: socket / headphone cable / key cable
|
||||
- TX: 0.01, 0.1 W, optional 0.5 or 2 W
|
||||
- RX: direct conversion (electronic 100 Hz steps or less)
|
||||
|
||||
### user interface
|
||||
|
||||
- mechanical off/volume knob
|
||||
- buttons: MENU, ESC, ENTER, +, -, A, Z, (RESET)
|
||||
- output by side tone, Morse code
|
||||
- headphone jack, loudspeaker optional (low sound quality ok)
|
||||
- direct keying, elbug optional (selected by plug type)
|
||||
- 8 buttons: MENU, ESC, ENTER, +, -, A, Z, (RESET)
|
||||
- output by side tone in Morse code, default speed 20 wpm
|
||||
- LED optional (blinking with side tone)
|
||||
- 2 headphone jacks, optionally one with deactivated loudspeaker (low sound quality ok)
|
||||
- direct keying, elbug optional (perhaps selected by plug type)
|
||||
|
||||
#### button functions outside of settings
|
||||
|
||||
button press generates side tone, higher pitch when long
|
||||
button press generates side tone, higher pitch when long press detected
|
||||
|
||||
- MENU: settings (short), default store (long)
|
||||
- ESC: status report (short), default recall (long)
|
||||
- ENTER: transmit key
|
||||
- +, -: freq change (increasing step size when long press, indicated by increasing side tone pitch)
|
||||
- A, Z: memory recall (short), memory store (long)
|
||||
- (RESET): hidden button, factory defaults
|
||||
- MENU: settings (short) / default store (long)
|
||||
- ESC: status report (short) / default recall (long)
|
||||
- ENTER: transmit (short or long)
|
||||
- +, -: freq change (increasing step size when long press, indicated by increasing side tone pitch) with reporting of changed digits in case of increased step size
|
||||
- A, Z: memory recall (short) / memory store (long)
|
||||
- (RESET): hidden button for factory defaults (long)
|
||||
|
||||
status report: RX/TX freq (kHz abbreviated in range limits)
|
||||
status report: RX/TX freq (abbreviated inside range limits), battery level
|
||||
|
||||
#### settings
|
||||
|
||||
- while in settings, short beep every 2 sec
|
||||
- acknowledge by
|
||||
- while idle in settings, short beep every 2 sec
|
||||
|
||||
##### buttons
|
||||
|
||||
- MENU: tell current item (short), store and exit (long)
|
||||
- ESC: leave current menu (short), abandon and exit (long)
|
||||
- MENU: tell current item (short) / save and exit (long)
|
||||
- ESC: leave current menu (short) / abandon and exit (long)
|
||||
- +, -: change
|
||||
- ENTER: select current item
|
||||
- A: yes/set/all/max.value
|
||||
- Z: no/clear/zero/min.value
|
||||
|
||||
##### items
|
||||
|
||||
- power level
|
||||
- squelch level
|
||||
- receive offset (active after transmission, always zero during scanning)
|
||||
|
||||
---
|
||||
|
|
Loading…
Reference in New Issue