hugo/hugolib/shortcode.go

766 lines
21 KiB
Go
Raw Normal View History

// Copyright 2017 The Hugo Authors. All rights reserved.
2013-07-04 15:32:55 +00:00
//
2015-11-24 03:16:36 +00:00
// Licensed under the Apache License, Version 2.0 (the "License");
2013-07-04 15:32:55 +00:00
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
2015-11-24 03:16:36 +00:00
// http://www.apache.org/licenses/LICENSE-2.0
2013-07-04 15:32:55 +00:00
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package hugolib
import (
"bytes"
"errors"
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
"fmt"
2014-01-29 22:50:31 +00:00
"html/template"
"reflect"
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
"regexp"
"sort"
2014-01-29 22:50:31 +00:00
"strings"
"sync"
"github.com/gohugoio/hugo/common/maps"
"github.com/gohugoio/hugo/output"
"github.com/gohugoio/hugo/media"
bp "github.com/gohugoio/hugo/bufferpool"
"github.com/gohugoio/hugo/helpers"
"github.com/gohugoio/hugo/tpl"
)
2013-07-04 15:32:55 +00:00
2016-03-24 13:11:04 +00:00
// ShortcodeWithPage is the "." context in a shortcode template.
2013-07-04 15:32:55 +00:00
type ShortcodeWithPage struct {
Params interface{}
Inner template.HTML
Page *PageWithoutContent
Parent *ShortcodeWithPage
IsNamedParams bool
// Zero-based ordinal in relation to its parent. If the parent is the page itself,
// this ordinal will represent the position of this shortcode in the page content.
Ordinal int
scratch *maps.Scratch
2013-07-04 15:32:55 +00:00
}
2016-03-24 13:11:04 +00:00
// Site returns information about the current site.
func (scp *ShortcodeWithPage) Site() *SiteInfo {
return scp.Page.Site
}
2016-03-24 13:11:04 +00:00
// Ref is a shortcut to the Ref method on Page.
Provide (relative) reference funcs & shortcodes. - `.Ref` and `.RelRef` take a reference (the logical filename for a page, including extension and/or a document fragment ID) and return a permalink (or relative permalink) to the referenced document. - If the reference is a page name (such as `about.md`), the page will be discovered and the permalink will be returned: `/about/` - If the reference is a page name with a fragment (such as `about.md#who`), the page will be discovered and used to add the `page.UniqueID()` to the resulting fragment and permalink: `/about/#who:deadbeef`. - If the reference is a fragment and `.*Ref` has been called from a `Node` or `SiteInfo`, it will be returned as is: `#who`. - If the reference is a fragment and `.*Ref` has been called from a `Page`, it will be returned with the page’s unique ID: `#who:deadbeef`. - `.*Ref` can be called from either `Node`, `SiteInfo` (e.g., `Node.Site`), `Page` objects, or `ShortcodeWithPage` objects in templates. - `.*Ref` cannot be used in content, so two shortcodes have been created to provide the functionality to content: `ref` and `relref`. These are intended to be used within markup, like `[Who]({{% ref about.md#who %}})` or `<a href="{{% ref about.md#who %}}">Who</a>`. - There are also `ref` and `relref` template functions (used to create the shortcodes) that expect a `Page` or `Node` object and the reference string (e.g., `{{ relref . "about.md" }}` or `{{ "about.md" | ref . }}`). It actually looks for `.*Ref` as defined on `Node` or `Page` objects. - Shortcode handling had to use a *differently unique* wrapper in `createShortcodePlaceholder` because of the way that the `ref` and `relref` are intended to be used in content.
2014-11-24 06:15:34 +00:00
func (scp *ShortcodeWithPage) Ref(ref string) (string, error) {
return scp.Page.Ref(ref)
}
2016-03-24 13:11:04 +00:00
// RelRef is a shortcut to the RelRef method on Page.
Provide (relative) reference funcs & shortcodes. - `.Ref` and `.RelRef` take a reference (the logical filename for a page, including extension and/or a document fragment ID) and return a permalink (or relative permalink) to the referenced document. - If the reference is a page name (such as `about.md`), the page will be discovered and the permalink will be returned: `/about/` - If the reference is a page name with a fragment (such as `about.md#who`), the page will be discovered and used to add the `page.UniqueID()` to the resulting fragment and permalink: `/about/#who:deadbeef`. - If the reference is a fragment and `.*Ref` has been called from a `Node` or `SiteInfo`, it will be returned as is: `#who`. - If the reference is a fragment and `.*Ref` has been called from a `Page`, it will be returned with the page’s unique ID: `#who:deadbeef`. - `.*Ref` can be called from either `Node`, `SiteInfo` (e.g., `Node.Site`), `Page` objects, or `ShortcodeWithPage` objects in templates. - `.*Ref` cannot be used in content, so two shortcodes have been created to provide the functionality to content: `ref` and `relref`. These are intended to be used within markup, like `[Who]({{% ref about.md#who %}})` or `<a href="{{% ref about.md#who %}}">Who</a>`. - There are also `ref` and `relref` template functions (used to create the shortcodes) that expect a `Page` or `Node` object and the reference string (e.g., `{{ relref . "about.md" }}` or `{{ "about.md" | ref . }}`). It actually looks for `.*Ref` as defined on `Node` or `Page` objects. - Shortcode handling had to use a *differently unique* wrapper in `createShortcodePlaceholder` because of the way that the `ref` and `relref` are intended to be used in content.
2014-11-24 06:15:34 +00:00
func (scp *ShortcodeWithPage) RelRef(ref string) (string, error) {
return scp.Page.RelRef(ref)
}
2016-03-24 13:11:04 +00:00
// Scratch returns a scratch-pad scoped for this shortcode. This can be used
// as a temporary storage for variables, counters etc.
func (scp *ShortcodeWithPage) Scratch() *maps.Scratch {
2016-03-21 10:10:57 +00:00
if scp.scratch == nil {
scp.scratch = maps.NewScratch()
2016-03-21 10:10:57 +00:00
}
return scp.scratch
2015-04-19 12:50:24 +00:00
}
2016-03-24 13:11:04 +00:00
// Get is a convenience method to look up shortcode parameters by its key.
func (scp *ShortcodeWithPage) Get(key interface{}) interface{} {
if scp.Params == nil {
return nil
}
if reflect.ValueOf(scp.Params).Len() == 0 {
return nil
}
var x reflect.Value
switch key.(type) {
case int64, int32, int16, int8, int:
if reflect.TypeOf(scp.Params).Kind() == reflect.Map {
// We treat this as a non error, so people can do similar to
// {{ $myParam := .Get "myParam" | default .Get 0 }}
// Without having to do additional checks.
return nil
} else if reflect.TypeOf(scp.Params).Kind() == reflect.Slice {
idx := int(reflect.ValueOf(key).Int())
ln := reflect.ValueOf(scp.Params).Len()
if idx > ln-1 {
return ""
}
x = reflect.ValueOf(scp.Params).Index(idx)
}
case string:
if reflect.TypeOf(scp.Params).Kind() == reflect.Map {
x = reflect.ValueOf(scp.Params).MapIndex(reflect.ValueOf(key))
if !x.IsValid() {
return ""
}
} else if reflect.TypeOf(scp.Params).Kind() == reflect.Slice {
// We treat this as a non error, so people can do similar to
// {{ $myParam := .Get "myParam" | default .Get 0 }}
// Without having to do additional checks.
return nil
}
}
switch x.Kind() {
case reflect.String:
return x.String()
case reflect.Int64, reflect.Int32, reflect.Int16, reflect.Int8, reflect.Int:
return x.Int()
default:
return x
}
}
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
// Note - this value must not contain any markup syntax
const shortcodePlaceholderPrefix = "HUGOSHORTCODE"
2013-07-04 15:32:55 +00:00
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
type shortcode struct {
name string
inner []interface{} // string or nested shortcode
params interface{} // map or array
ordinal int
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
err error
doMarkup bool
2013-07-04 15:32:55 +00:00
}
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
func (sc shortcode) String() string {
// for testing (mostly), so any change here will break tests!
var params interface{}
switch v := sc.params.(type) {
case map[string]string:
// sort the keys so test assertions won't fail
var keys []string
for k := range v {
keys = append(keys, k)
}
sort.Strings(keys)
var tmp = make([]string, len(keys))
for i, k := range keys {
tmp[i] = k + ":" + v[k]
}
params = tmp
default:
// use it as is
params = sc.params
}
return fmt.Sprintf("%s(%q, %t){%s}", sc.name, params, sc.doMarkup, sc.inner)
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
}
// We may have special shortcode templates for AMP etc.
// Note that in the below, OutputFormat may be empty.
// We will try to look for the most specific shortcode template available.
type scKey struct {
Lang string
OutputFormat string
Suffix string
ShortcodePlaceholder string
}
func newScKey(m media.Type, shortcodeplaceholder string) scKey {
return scKey{Suffix: m.Suffix(), ShortcodePlaceholder: shortcodeplaceholder}
}
func newScKeyFromLangAndOutputFormat(lang string, o output.Format, shortcodeplaceholder string) scKey {
return scKey{Lang: lang, Suffix: o.MediaType.Suffix(), OutputFormat: o.Name, ShortcodePlaceholder: shortcodeplaceholder}
}
func newDefaultScKey(shortcodeplaceholder string) scKey {
return newScKey(media.HTMLType, shortcodeplaceholder)
}
type shortcodeHandler struct {
init sync.Once
p *PageWithoutContent
// This is all shortcode rendering funcs for all potential output formats.
contentShortcodes *orderedMap
// This map contains the new or changed set of shortcodes that need
// to be rendered for the current output format.
contentShortcodesDelta *orderedMap
// This maps the shorcode placeholders with the rendered content.
// We will do (potential) partial re-rendering per output format,
// so keep this for the unchanged.
renderedShortcodes map[string]string
// Maps the shortcodeplaceholder with the actual shortcode.
shortcodes *orderedMap
// All the shortcode names in this set.
nameSet map[string]bool
placeholderID int
placeholderFunc func() string
}
func (s *shortcodeHandler) nextPlaceholderID() int {
s.placeholderID++
return s.placeholderID
}
func (s *shortcodeHandler) createShortcodePlaceholder() string {
if s.placeholderFunc != nil {
return s.placeholderFunc()
}
return fmt.Sprintf("HAHA%s-%p-%d-HBHB", shortcodePlaceholderPrefix, s.p.Page, s.nextPlaceholderID())
}
func newShortcodeHandler(p *Page) *shortcodeHandler {
return &shortcodeHandler{
p: p.withoutContent(),
contentShortcodes: newOrderedMap(),
shortcodes: newOrderedMap(),
nameSet: make(map[string]bool),
renderedShortcodes: make(map[string]string),
}
}
// TODO(bep) make it non-global
var isInnerShortcodeCache = struct {
sync.RWMutex
m map[string]bool
}{m: make(map[string]bool)}
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
// to avoid potential costly look-aheads for closing tags we look inside the template itself
// we could change the syntax to self-closing tags, but that would make users cry
// the value found is cached
func isInnerShortcode(t tpl.TemplateExecutor) (bool, error) {
isInnerShortcodeCache.RLock()
m, ok := isInnerShortcodeCache.m[t.Name()]
isInnerShortcodeCache.RUnlock()
if ok {
return m, nil
}
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
isInnerShortcodeCache.Lock()
defer isInnerShortcodeCache.Unlock()
match, _ := regexp.MatchString("{{.*?\\.Inner.*?}}", t.Tree())
isInnerShortcodeCache.m[t.Name()] = match
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
return match, nil
}
func clearIsInnerShortcodeCache() {
isInnerShortcodeCache.Lock()
defer isInnerShortcodeCache.Unlock()
isInnerShortcodeCache.m = make(map[string]bool)
}
Provide (relative) reference funcs & shortcodes. - `.Ref` and `.RelRef` take a reference (the logical filename for a page, including extension and/or a document fragment ID) and return a permalink (or relative permalink) to the referenced document. - If the reference is a page name (such as `about.md`), the page will be discovered and the permalink will be returned: `/about/` - If the reference is a page name with a fragment (such as `about.md#who`), the page will be discovered and used to add the `page.UniqueID()` to the resulting fragment and permalink: `/about/#who:deadbeef`. - If the reference is a fragment and `.*Ref` has been called from a `Node` or `SiteInfo`, it will be returned as is: `#who`. - If the reference is a fragment and `.*Ref` has been called from a `Page`, it will be returned with the page’s unique ID: `#who:deadbeef`. - `.*Ref` can be called from either `Node`, `SiteInfo` (e.g., `Node.Site`), `Page` objects, or `ShortcodeWithPage` objects in templates. - `.*Ref` cannot be used in content, so two shortcodes have been created to provide the functionality to content: `ref` and `relref`. These are intended to be used within markup, like `[Who]({{% ref about.md#who %}})` or `<a href="{{% ref about.md#who %}}">Who</a>`. - There are also `ref` and `relref` template functions (used to create the shortcodes) that expect a `Page` or `Node` object and the reference string (e.g., `{{ relref . "about.md" }}` or `{{ "about.md" | ref . }}`). It actually looks for `.*Ref` as defined on `Node` or `Page` objects. - Shortcode handling had to use a *differently unique* wrapper in `createShortcodePlaceholder` because of the way that the `ref` and `relref` are intended to be used in content.
2014-11-24 06:15:34 +00:00
const innerNewlineRegexp = "\n"
const innerCleanupRegexp = `\A<p>(.*)</p>\n\z`
const innerCleanupExpand = "$1"
func prepareShortcodeForPage(placeholder string, sc *shortcode, parent *ShortcodeWithPage, p *PageWithoutContent) map[scKey]func() (string, error) {
m := make(map[scKey]func() (string, error))
lang := p.Lang()
for _, f := range p.outputFormats {
// The most specific template will win.
key := newScKeyFromLangAndOutputFormat(lang, f, placeholder)
m[key] = func() (string, error) {
return renderShortcode(key, sc, nil, p), nil
}
}
return m
}
func renderShortcode(
tmplKey scKey,
sc *shortcode,
parent *ShortcodeWithPage,
p *PageWithoutContent) string {
tmpl := getShortcodeTemplateForTemplateKey(tmplKey, sc.name, p.s.Tmpl)
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
if tmpl == nil {
p.s.Log.ERROR.Printf("Unable to locate template for shortcode %q in page %q", sc.name, p.Path())
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
return ""
}
data := &ShortcodeWithPage{Ordinal: sc.ordinal, Params: sc.params, Page: p, Parent: parent}
if sc.params != nil {
data.IsNamedParams = reflect.TypeOf(sc.params).Kind() == reflect.Map
}
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
if len(sc.inner) > 0 {
var inner string
for _, innerData := range sc.inner {
switch innerData.(type) {
case string:
inner += innerData.(string)
case *shortcode:
inner += renderShortcode(tmplKey, innerData.(*shortcode), data, p)
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
default:
p.s.Log.ERROR.Printf("Illegal state on shortcode rendering of %q in page %q. Illegal type in inner data: %s ",
sc.name, p.Path(), reflect.TypeOf(innerData))
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
return ""
}
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
}
if sc.doMarkup {
newInner := p.s.ContentSpec.RenderBytes(&helpers.RenderingContext{
Content: []byte(inner),
PageFmt: p.Markup,
Cfg: p.Language(),
DocumentID: p.UniqueID(),
DocumentName: p.Path(),
Config: p.getRenderingConfig()})
Provide (relative) reference funcs & shortcodes. - `.Ref` and `.RelRef` take a reference (the logical filename for a page, including extension and/or a document fragment ID) and return a permalink (or relative permalink) to the referenced document. - If the reference is a page name (such as `about.md`), the page will be discovered and the permalink will be returned: `/about/` - If the reference is a page name with a fragment (such as `about.md#who`), the page will be discovered and used to add the `page.UniqueID()` to the resulting fragment and permalink: `/about/#who:deadbeef`. - If the reference is a fragment and `.*Ref` has been called from a `Node` or `SiteInfo`, it will be returned as is: `#who`. - If the reference is a fragment and `.*Ref` has been called from a `Page`, it will be returned with the page’s unique ID: `#who:deadbeef`. - `.*Ref` can be called from either `Node`, `SiteInfo` (e.g., `Node.Site`), `Page` objects, or `ShortcodeWithPage` objects in templates. - `.*Ref` cannot be used in content, so two shortcodes have been created to provide the functionality to content: `ref` and `relref`. These are intended to be used within markup, like `[Who]({{% ref about.md#who %}})` or `<a href="{{% ref about.md#who %}}">Who</a>`. - There are also `ref` and `relref` template functions (used to create the shortcodes) that expect a `Page` or `Node` object and the reference string (e.g., `{{ relref . "about.md" }}` or `{{ "about.md" | ref . }}`). It actually looks for `.*Ref` as defined on `Node` or `Page` objects. - Shortcode handling had to use a *differently unique* wrapper in `createShortcodePlaceholder` because of the way that the `ref` and `relref` are intended to be used in content.
2014-11-24 06:15:34 +00:00
// If the type is “unknown” or “markdown”, we assume the markdown
// generation has been performed. Given the input: `a line`, markdown
// specifies the HTML `<p>a line</p>\n`. When dealing with documents as a
// whole, this is OK. When dealing with an `{{ .Inner }}` block in Hugo,
// this is not so good. This code does two things:
//
// 1. Check to see if inner has a newline in it. If so, the Inner data is
// unchanged.
// 2 If inner does not have a newline, strip the wrapping <p> block and
// the newline. This was previously tricked out by wrapping shortcode
// substitutions in <div>HUGOSHORTCODE-1</div> which prevents the
// generation, but means that you cant use shortcodes inside of
// markdown structures itself (e.g., `[foo]({{% ref foo.md %}})`).
switch p.Markup {
Provide (relative) reference funcs & shortcodes. - `.Ref` and `.RelRef` take a reference (the logical filename for a page, including extension and/or a document fragment ID) and return a permalink (or relative permalink) to the referenced document. - If the reference is a page name (such as `about.md`), the page will be discovered and the permalink will be returned: `/about/` - If the reference is a page name with a fragment (such as `about.md#who`), the page will be discovered and used to add the `page.UniqueID()` to the resulting fragment and permalink: `/about/#who:deadbeef`. - If the reference is a fragment and `.*Ref` has been called from a `Node` or `SiteInfo`, it will be returned as is: `#who`. - If the reference is a fragment and `.*Ref` has been called from a `Page`, it will be returned with the page’s unique ID: `#who:deadbeef`. - `.*Ref` can be called from either `Node`, `SiteInfo` (e.g., `Node.Site`), `Page` objects, or `ShortcodeWithPage` objects in templates. - `.*Ref` cannot be used in content, so two shortcodes have been created to provide the functionality to content: `ref` and `relref`. These are intended to be used within markup, like `[Who]({{% ref about.md#who %}})` or `<a href="{{% ref about.md#who %}}">Who</a>`. - There are also `ref` and `relref` template functions (used to create the shortcodes) that expect a `Page` or `Node` object and the reference string (e.g., `{{ relref . "about.md" }}` or `{{ "about.md" | ref . }}`). It actually looks for `.*Ref` as defined on `Node` or `Page` objects. - Shortcode handling had to use a *differently unique* wrapper in `createShortcodePlaceholder` because of the way that the `ref` and `relref` are intended to be used in content.
2014-11-24 06:15:34 +00:00
case "unknown", "markdown":
if match, _ := regexp.MatchString(innerNewlineRegexp, inner); !match {
cleaner, err := regexp.Compile(innerCleanupRegexp)
if err == nil {
newInner = cleaner.ReplaceAll(newInner, []byte(innerCleanupExpand))
}
}
}
// TODO(bep) we may have plain text inner templates.
Provide (relative) reference funcs & shortcodes. - `.Ref` and `.RelRef` take a reference (the logical filename for a page, including extension and/or a document fragment ID) and return a permalink (or relative permalink) to the referenced document. - If the reference is a page name (such as `about.md`), the page will be discovered and the permalink will be returned: `/about/` - If the reference is a page name with a fragment (such as `about.md#who`), the page will be discovered and used to add the `page.UniqueID()` to the resulting fragment and permalink: `/about/#who:deadbeef`. - If the reference is a fragment and `.*Ref` has been called from a `Node` or `SiteInfo`, it will be returned as is: `#who`. - If the reference is a fragment and `.*Ref` has been called from a `Page`, it will be returned with the page’s unique ID: `#who:deadbeef`. - `.*Ref` can be called from either `Node`, `SiteInfo` (e.g., `Node.Site`), `Page` objects, or `ShortcodeWithPage` objects in templates. - `.*Ref` cannot be used in content, so two shortcodes have been created to provide the functionality to content: `ref` and `relref`. These are intended to be used within markup, like `[Who]({{% ref about.md#who %}})` or `<a href="{{% ref about.md#who %}}">Who</a>`. - There are also `ref` and `relref` template functions (used to create the shortcodes) that expect a `Page` or `Node` object and the reference string (e.g., `{{ relref . "about.md" }}` or `{{ "about.md" | ref . }}`). It actually looks for `.*Ref` as defined on `Node` or `Page` objects. - Shortcode handling had to use a *differently unique* wrapper in `createShortcodePlaceholder` because of the way that the `ref` and `relref` are intended to be used in content.
2014-11-24 06:15:34 +00:00
data.Inner = template.HTML(newInner)
} else {
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
data.Inner = template.HTML(inner)
}
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
}
return renderShortcodeWithPage(tmpl, data)
}
// The delta represents new output format-versions of the shortcodes,
// which, combined with the ones that do not have alternative representations,
// builds a complete set ready for a full rebuild of the Page content.
// This method returns false if there are no new shortcode variants in the
// current rendering context's output format. This mean we can safely reuse
// the content from the previous output format, if any.
func (s *shortcodeHandler) updateDelta() bool {
s.init.Do(func() {
s.contentShortcodes = createShortcodeRenderers(s.shortcodes, s.p.withoutContent())
})
if !s.p.shouldRenderTo(s.p.s.rc.Format) {
// TODO(bep) add test for this re translations
return false
}
of := s.p.s.rc.Format
contentShortcodes := s.contentShortcodesForOutputFormat(of)
if s.contentShortcodesDelta == nil || s.contentShortcodesDelta.Len() == 0 {
s.contentShortcodesDelta = contentShortcodes
return true
2014-01-29 22:50:31 +00:00
}
delta := newOrderedMap()
for _, k := range contentShortcodes.Keys() {
if !s.contentShortcodesDelta.Contains(k) {
v, _ := contentShortcodes.Get(k)
delta.Add(k, v)
}
}
s.contentShortcodesDelta = delta
return delta.Len() > 0
}
func (s *shortcodeHandler) clearDelta() {
if s == nil {
return
}
s.contentShortcodesDelta = newOrderedMap()
}
func (s *shortcodeHandler) contentShortcodesForOutputFormat(f output.Format) *orderedMap {
contentShortcodesForOuputFormat := newOrderedMap()
lang := s.p.Lang()
for _, key := range s.shortcodes.Keys() {
shortcodePlaceholder := key.(string)
key := newScKeyFromLangAndOutputFormat(lang, f, shortcodePlaceholder)
renderFn, found := s.contentShortcodes.Get(key)
if !found {
key.OutputFormat = ""
renderFn, found = s.contentShortcodes.Get(key)
}
// Fall back to HTML
if !found && key.Suffix != "html" {
key.Suffix = "html"
renderFn, found = s.contentShortcodes.Get(key)
}
if !found {
panic(fmt.Sprintf("Shortcode %q could not be found", shortcodePlaceholder))
}
contentShortcodesForOuputFormat.Add(newScKeyFromLangAndOutputFormat(lang, f, shortcodePlaceholder), renderFn)
}
return contentShortcodesForOuputFormat
}
func (s *shortcodeHandler) executeShortcodesForDelta(p *PageWithoutContent) error {
for _, k := range s.contentShortcodesDelta.Keys() {
render := s.contentShortcodesDelta.getShortcodeRenderer(k)
renderedShortcode, err := render()
if err != nil {
return fmt.Errorf("Failed to execute shortcode in page %q: %s", p.Path(), err)
}
s.renderedShortcodes[k.(scKey).ShortcodePlaceholder] = renderedShortcode
}
return nil
}
func createShortcodeRenderers(shortcodes *orderedMap, p *PageWithoutContent) *orderedMap {
shortcodeRenderers := newOrderedMap()
for _, k := range shortcodes.Keys() {
v := shortcodes.getShortcode(k)
prepared := prepareShortcodeForPage(k.(string), v, nil, p)
for kk, vv := range prepared {
shortcodeRenderers.Add(kk, vv)
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
}
}
2014-01-29 22:50:31 +00:00
return shortcodeRenderers
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
}
2016-03-24 13:11:04 +00:00
var errShortCodeIllegalState = errors.New("Illegal shortcode state")
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
// pageTokens state:
// - before: positioned just before the shortcode start
// - after: shortcode(s) consumed (plural when they are nested)
func (s *shortcodeHandler) extractShortcode(ordinal int, pt *pageTokens, p *PageWithoutContent) (*shortcode, error) {
sc := &shortcode{ordinal: ordinal}
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
var isInner = false
var currItem item
var cnt = 0
var nestedOrdinal = 0
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
Loop:
for {
currItem = pt.next()
switch currItem.typ {
case tLeftDelimScWithMarkup, tLeftDelimScNoMarkup:
next := pt.peek()
if next.typ == tScClose {
continue
2014-01-29 22:50:31 +00:00
}
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
if cnt > 0 {
// nested shortcode; append it to inner content
pt.backup3(currItem, next)
nested, err := s.extractShortcode(nestedOrdinal, pt, p)
nestedOrdinal++
if nested.name != "" {
s.nameSet[nested.name] = true
}
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
if err == nil {
sc.inner = append(sc.inner, nested)
} else {
return sc, err
}
2014-01-29 22:50:31 +00:00
} else {
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
sc.doMarkup = currItem.typ == tLeftDelimScWithMarkup
2014-01-29 22:50:31 +00:00
}
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
cnt++
case tRightDelimScWithMarkup, tRightDelimScNoMarkup:
// we trust the template on this:
// if there's no inner, we're done
if !isInner {
return sc, nil
}
case tScClose:
next := pt.peek()
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
if !isInner {
if next.typ == tError {
// return that error, more specific
continue
}
return sc, fmt.Errorf("Shortcode '%s' in page '%s' has no .Inner, yet a closing tag was provided", next.val, p.FullFilePath())
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
}
if next.typ == tRightDelimScWithMarkup || next.typ == tRightDelimScNoMarkup {
// self-closing
pt.consume(1)
} else {
pt.consume(2)
}
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
return sc, nil
case tText:
sc.inner = append(sc.inner, currItem.val)
case tScName:
sc.name = currItem.val
// We pick the first template for an arbitrary output format
// if more than one. It is "all inner or no inner".
tmpl := getShortcodeTemplateForTemplateKey(scKey{}, sc.name, p.s.Tmpl)
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
if tmpl == nil {
return sc, fmt.Errorf("Unable to locate template for shortcode %q in page %q", sc.name, p.Path())
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
}
var err error
Add Hugo Piper with SCSS support and much more Before this commit, you would have to use page bundles to do image processing etc. in Hugo. This commit adds * A new `/assets` top-level project or theme dir (configurable via `assetDir`) * A new template func, `resources.Get` which can be used to "get a resource" that can be further processed. This means that you can now do this in your templates (or shortcodes): ```bash {{ $sunset := (resources.Get "images/sunset.jpg").Fill "300x200" }} ``` This also adds a new `extended` build tag that enables powerful SCSS/SASS support with source maps. To compile this from source, you will also need a C compiler installed: ``` HUGO_BUILD_TAGS=extended mage install ``` Note that you can use output of the SCSS processing later in a non-SCSSS-enabled Hugo. The `SCSS` processor is a _Resource transformation step_ and it can be chained with the many others in a pipeline: ```bash {{ $css := resources.Get "styles.scss" | resources.ToCSS | resources.PostCSS | resources.Minify | resources.Fingerprint }} <link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen"> ``` The transformation funcs above have aliases, so it can be shortened to: ```bash {{ $css := resources.Get "styles.scss" | toCSS | postCSS | minify | fingerprint }} <link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen"> ``` A quick tip would be to avoid the fingerprinting part, and possibly also the not-superfast `postCSS` when you're doing development, as it allows Hugo to be smarter about the rebuilding. Documentation will follow, but have a look at the demo repo in https://github.com/bep/hugo-sass-test New functions to create `Resource` objects: * `resources.Get` (see above) * `resources.FromString`: Create a Resource from a string. New `Resource` transformation funcs: * `resources.ToCSS`: Compile `SCSS` or `SASS` into `CSS`. * `resources.PostCSS`: Process your CSS with PostCSS. Config file support (project or theme or passed as an option). * `resources.Minify`: Currently supports `css`, `js`, `json`, `html`, `svg`, `xml`. * `resources.Fingerprint`: Creates a fingerprinted version of the given Resource with Subresource Integrity.. * `resources.Concat`: Concatenates a list of Resource objects. Think of this as a poor man's bundler. * `resources.ExecuteAsTemplate`: Parses and executes the given Resource and data context (e.g. .Site) as a Go template. Fixes #4381 Fixes #4903 Fixes #4858
2018-02-20 09:02:14 +00:00
isInner, err = isInnerShortcode(tmpl.(tpl.TemplateExecutor))
if err != nil {
return sc, fmt.Errorf("Failed to handle template for shortcode %q for page %q: %s", sc.name, p.Path(), err)
}
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
case tScParam:
if !pt.isValueNext() {
continue
} else if pt.peek().typ == tScParamVal {
// named params
if sc.params == nil {
params := make(map[string]string)
params[currItem.val] = pt.next().val
sc.params = params
2014-01-29 22:50:31 +00:00
} else {
if params, ok := sc.params.(map[string]string); ok {
params[currItem.val] = pt.next().val
} else {
2016-03-24 13:11:04 +00:00
return sc, errShortCodeIllegalState
}
2014-01-29 22:50:31 +00:00
}
} else {
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
// positional params
if sc.params == nil {
var params []string
params = append(params, currItem.val)
sc.params = params
2014-01-29 22:50:31 +00:00
} else {
if params, ok := sc.params.([]string); ok {
params = append(params, currItem.val)
sc.params = params
} else {
2016-03-24 13:11:04 +00:00
return sc, errShortCodeIllegalState
}
2014-01-29 22:50:31 +00:00
}
}
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
case tError, tEOF:
// handled by caller
pt.backup()
break Loop
2014-01-29 22:50:31 +00:00
}
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
}
return sc, nil
}
func (s *shortcodeHandler) extractShortcodes(stringToParse string, p *PageWithoutContent) (string, error) {
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
startIdx := strings.Index(stringToParse, "{{")
// short cut for docs with no shortcodes
if startIdx < 0 {
return stringToParse, nil
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
}
// the parser takes a string;
// since this is an internal API, it could make sense to use the mutable []byte all the way, but
// it seems that the time isn't really spent in the byte copy operations, and the impl. gets a lot cleaner
pt := &pageTokens{lexer: newShortcodeLexer("parse-page", stringToParse, pos(startIdx))}
2015-01-30 19:19:46 +00:00
result := bp.GetBuffer()
defer bp.PutBuffer(result)
//var result bytes.Buffer
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
// the parser is guaranteed to return items in proper order or fail, so …
// … it's safe to keep some "global" state
var currItem item
var currShortcode shortcode
var ordinal int
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
Loop:
for {
currItem = pt.next()
switch currItem.typ {
case tText:
result.WriteString(currItem.val)
case tLeftDelimScWithMarkup, tLeftDelimScNoMarkup:
// let extractShortcode handle left delim (will do so recursively)
pt.backup()
currShortcode, err := s.extractShortcode(ordinal, pt, p)
if currShortcode.name != "" {
s.nameSet[currShortcode.name] = true
}
if err != nil {
return result.String(), err
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
}
if currShortcode.params == nil {
currShortcode.params = make([]string, 0)
}
2014-01-29 22:50:31 +00:00
placeHolder := s.createShortcodePlaceholder()
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
result.WriteString(placeHolder)
ordinal++
s.shortcodes.Add(placeHolder, currShortcode)
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
case tEOF:
break Loop
case tError:
err := fmt.Errorf("%s:%d: %s",
p.FullFilePath(), (p.lineNumRawContentStart() + pt.lexer.lineNum() - 1), currItem)
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
currShortcode.err = err
return result.String(), err
2014-01-29 22:50:31 +00:00
}
}
return result.String(), nil
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
}
// Replace prefixed shortcode tokens (HUGOSHORTCODE-1, HUGOSHORTCODE-2) with the real content.
// Note: This function will rewrite the input slice.
func replaceShortcodeTokens(source []byte, prefix string, replacements map[string]string) ([]byte, error) {
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
if len(replacements) == 0 {
return source, nil
2014-01-29 22:50:31 +00:00
}
sourceLen := len(source)
start := 0
pre := []byte("HAHA" + prefix)
post := []byte("HBHB")
pStart := []byte("<p>")
pEnd := []byte("</p>")
k := bytes.Index(source[start:], pre)
for k != -1 {
j := start + k
postIdx := bytes.Index(source[j:], post)
if postIdx < 0 {
// this should never happen, but let the caller decide to panic or not
return nil, errors.New("illegal state in content; shortcode token missing end delim")
}
end := j + postIdx + 4
newVal := []byte(replacements[string(source[j:end])])
// Issue #1148: Check for wrapping p-tags <p>
if j >= 3 && bytes.Equal(source[j-3:j], pStart) {
if (k+4) < sourceLen && bytes.Equal(source[end:end+4], pEnd) {
j -= 3
end += 4
}
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
}
Provide (relative) reference funcs & shortcodes. - `.Ref` and `.RelRef` take a reference (the logical filename for a page, including extension and/or a document fragment ID) and return a permalink (or relative permalink) to the referenced document. - If the reference is a page name (such as `about.md`), the page will be discovered and the permalink will be returned: `/about/` - If the reference is a page name with a fragment (such as `about.md#who`), the page will be discovered and used to add the `page.UniqueID()` to the resulting fragment and permalink: `/about/#who:deadbeef`. - If the reference is a fragment and `.*Ref` has been called from a `Node` or `SiteInfo`, it will be returned as is: `#who`. - If the reference is a fragment and `.*Ref` has been called from a `Page`, it will be returned with the page’s unique ID: `#who:deadbeef`. - `.*Ref` can be called from either `Node`, `SiteInfo` (e.g., `Node.Site`), `Page` objects, or `ShortcodeWithPage` objects in templates. - `.*Ref` cannot be used in content, so two shortcodes have been created to provide the functionality to content: `ref` and `relref`. These are intended to be used within markup, like `[Who]({{% ref about.md#who %}})` or `<a href="{{% ref about.md#who %}}">Who</a>`. - There are also `ref` and `relref` template functions (used to create the shortcodes) that expect a `Page` or `Node` object and the reference string (e.g., `{{ relref . "about.md" }}` or `{{ "about.md" | ref . }}`). It actually looks for `.*Ref` as defined on `Node` or `Page` objects. - Shortcode handling had to use a *differently unique* wrapper in `createShortcodePlaceholder` because of the way that the `ref` and `relref` are intended to be used in content.
2014-11-24 06:15:34 +00:00
// This and other cool slice tricks: https://github.com/golang/go/wiki/SliceTricks
source = append(source[:j], append(newVal, source[end:]...)...)
start = j
k = bytes.Index(source[start:], pre)
}
return source, nil
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
}
2013-07-04 15:32:55 +00:00
Add Hugo Piper with SCSS support and much more Before this commit, you would have to use page bundles to do image processing etc. in Hugo. This commit adds * A new `/assets` top-level project or theme dir (configurable via `assetDir`) * A new template func, `resources.Get` which can be used to "get a resource" that can be further processed. This means that you can now do this in your templates (or shortcodes): ```bash {{ $sunset := (resources.Get "images/sunset.jpg").Fill "300x200" }} ``` This also adds a new `extended` build tag that enables powerful SCSS/SASS support with source maps. To compile this from source, you will also need a C compiler installed: ``` HUGO_BUILD_TAGS=extended mage install ``` Note that you can use output of the SCSS processing later in a non-SCSSS-enabled Hugo. The `SCSS` processor is a _Resource transformation step_ and it can be chained with the many others in a pipeline: ```bash {{ $css := resources.Get "styles.scss" | resources.ToCSS | resources.PostCSS | resources.Minify | resources.Fingerprint }} <link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen"> ``` The transformation funcs above have aliases, so it can be shortened to: ```bash {{ $css := resources.Get "styles.scss" | toCSS | postCSS | minify | fingerprint }} <link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen"> ``` A quick tip would be to avoid the fingerprinting part, and possibly also the not-superfast `postCSS` when you're doing development, as it allows Hugo to be smarter about the rebuilding. Documentation will follow, but have a look at the demo repo in https://github.com/bep/hugo-sass-test New functions to create `Resource` objects: * `resources.Get` (see above) * `resources.FromString`: Create a Resource from a string. New `Resource` transformation funcs: * `resources.ToCSS`: Compile `SCSS` or `SASS` into `CSS`. * `resources.PostCSS`: Process your CSS with PostCSS. Config file support (project or theme or passed as an option). * `resources.Minify`: Currently supports `css`, `js`, `json`, `html`, `svg`, `xml`. * `resources.Fingerprint`: Creates a fingerprinted version of the given Resource with Subresource Integrity.. * `resources.Concat`: Concatenates a list of Resource objects. Think of this as a poor man's bundler. * `resources.ExecuteAsTemplate`: Parses and executes the given Resource and data context (e.g. .Site) as a Go template. Fixes #4381 Fixes #4903 Fixes #4858
2018-02-20 09:02:14 +00:00
func getShortcodeTemplateForTemplateKey(key scKey, shortcodeName string, t tpl.TemplateFinder) tpl.Template {
isInnerShortcodeCache.RLock()
defer isInnerShortcodeCache.RUnlock()
var names []string
suffix := strings.ToLower(key.Suffix)
outFormat := strings.ToLower(key.OutputFormat)
lang := strings.ToLower(key.Lang)
if outFormat != "" && suffix != "" {
if lang != "" {
names = append(names, fmt.Sprintf("%s.%s.%s.%s", shortcodeName, lang, outFormat, suffix))
}
names = append(names, fmt.Sprintf("%s.%s.%s", shortcodeName, outFormat, suffix))
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
}
if suffix != "" {
if lang != "" {
names = append(names, fmt.Sprintf("%s.%s.%s", shortcodeName, lang, suffix))
}
names = append(names, fmt.Sprintf("%s.%s", shortcodeName, suffix))
}
names = append(names, shortcodeName)
for _, name := range names {
Add Hugo Piper with SCSS support and much more Before this commit, you would have to use page bundles to do image processing etc. in Hugo. This commit adds * A new `/assets` top-level project or theme dir (configurable via `assetDir`) * A new template func, `resources.Get` which can be used to "get a resource" that can be further processed. This means that you can now do this in your templates (or shortcodes): ```bash {{ $sunset := (resources.Get "images/sunset.jpg").Fill "300x200" }} ``` This also adds a new `extended` build tag that enables powerful SCSS/SASS support with source maps. To compile this from source, you will also need a C compiler installed: ``` HUGO_BUILD_TAGS=extended mage install ``` Note that you can use output of the SCSS processing later in a non-SCSSS-enabled Hugo. The `SCSS` processor is a _Resource transformation step_ and it can be chained with the many others in a pipeline: ```bash {{ $css := resources.Get "styles.scss" | resources.ToCSS | resources.PostCSS | resources.Minify | resources.Fingerprint }} <link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen"> ``` The transformation funcs above have aliases, so it can be shortened to: ```bash {{ $css := resources.Get "styles.scss" | toCSS | postCSS | minify | fingerprint }} <link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen"> ``` A quick tip would be to avoid the fingerprinting part, and possibly also the not-superfast `postCSS` when you're doing development, as it allows Hugo to be smarter about the rebuilding. Documentation will follow, but have a look at the demo repo in https://github.com/bep/hugo-sass-test New functions to create `Resource` objects: * `resources.Get` (see above) * `resources.FromString`: Create a Resource from a string. New `Resource` transformation funcs: * `resources.ToCSS`: Compile `SCSS` or `SASS` into `CSS`. * `resources.PostCSS`: Process your CSS with PostCSS. Config file support (project or theme or passed as an option). * `resources.Minify`: Currently supports `css`, `js`, `json`, `html`, `svg`, `xml`. * `resources.Fingerprint`: Creates a fingerprinted version of the given Resource with Subresource Integrity.. * `resources.Concat`: Concatenates a list of Resource objects. Think of this as a poor man's bundler. * `resources.ExecuteAsTemplate`: Parses and executes the given Resource and data context (e.g. .Site) as a Go template. Fixes #4381 Fixes #4903 Fixes #4858
2018-02-20 09:02:14 +00:00
if x, found := t.Lookup("shortcodes/" + name); found {
return x
}
Add Hugo Piper with SCSS support and much more Before this commit, you would have to use page bundles to do image processing etc. in Hugo. This commit adds * A new `/assets` top-level project or theme dir (configurable via `assetDir`) * A new template func, `resources.Get` which can be used to "get a resource" that can be further processed. This means that you can now do this in your templates (or shortcodes): ```bash {{ $sunset := (resources.Get "images/sunset.jpg").Fill "300x200" }} ``` This also adds a new `extended` build tag that enables powerful SCSS/SASS support with source maps. To compile this from source, you will also need a C compiler installed: ``` HUGO_BUILD_TAGS=extended mage install ``` Note that you can use output of the SCSS processing later in a non-SCSSS-enabled Hugo. The `SCSS` processor is a _Resource transformation step_ and it can be chained with the many others in a pipeline: ```bash {{ $css := resources.Get "styles.scss" | resources.ToCSS | resources.PostCSS | resources.Minify | resources.Fingerprint }} <link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen"> ``` The transformation funcs above have aliases, so it can be shortened to: ```bash {{ $css := resources.Get "styles.scss" | toCSS | postCSS | minify | fingerprint }} <link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen"> ``` A quick tip would be to avoid the fingerprinting part, and possibly also the not-superfast `postCSS` when you're doing development, as it allows Hugo to be smarter about the rebuilding. Documentation will follow, but have a look at the demo repo in https://github.com/bep/hugo-sass-test New functions to create `Resource` objects: * `resources.Get` (see above) * `resources.FromString`: Create a Resource from a string. New `Resource` transformation funcs: * `resources.ToCSS`: Compile `SCSS` or `SASS` into `CSS`. * `resources.PostCSS`: Process your CSS with PostCSS. Config file support (project or theme or passed as an option). * `resources.Minify`: Currently supports `css`, `js`, `json`, `html`, `svg`, `xml`. * `resources.Fingerprint`: Creates a fingerprinted version of the given Resource with Subresource Integrity.. * `resources.Concat`: Concatenates a list of Resource objects. Think of this as a poor man's bundler. * `resources.ExecuteAsTemplate`: Parses and executes the given Resource and data context (e.g. .Site) as a Go template. Fixes #4381 Fixes #4903 Fixes #4858
2018-02-20 09:02:14 +00:00
if x, found := t.Lookup("theme/shortcodes/" + name); found {
return x
}
Add Hugo Piper with SCSS support and much more Before this commit, you would have to use page bundles to do image processing etc. in Hugo. This commit adds * A new `/assets` top-level project or theme dir (configurable via `assetDir`) * A new template func, `resources.Get` which can be used to "get a resource" that can be further processed. This means that you can now do this in your templates (or shortcodes): ```bash {{ $sunset := (resources.Get "images/sunset.jpg").Fill "300x200" }} ``` This also adds a new `extended` build tag that enables powerful SCSS/SASS support with source maps. To compile this from source, you will also need a C compiler installed: ``` HUGO_BUILD_TAGS=extended mage install ``` Note that you can use output of the SCSS processing later in a non-SCSSS-enabled Hugo. The `SCSS` processor is a _Resource transformation step_ and it can be chained with the many others in a pipeline: ```bash {{ $css := resources.Get "styles.scss" | resources.ToCSS | resources.PostCSS | resources.Minify | resources.Fingerprint }} <link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen"> ``` The transformation funcs above have aliases, so it can be shortened to: ```bash {{ $css := resources.Get "styles.scss" | toCSS | postCSS | minify | fingerprint }} <link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen"> ``` A quick tip would be to avoid the fingerprinting part, and possibly also the not-superfast `postCSS` when you're doing development, as it allows Hugo to be smarter about the rebuilding. Documentation will follow, but have a look at the demo repo in https://github.com/bep/hugo-sass-test New functions to create `Resource` objects: * `resources.Get` (see above) * `resources.FromString`: Create a Resource from a string. New `Resource` transformation funcs: * `resources.ToCSS`: Compile `SCSS` or `SASS` into `CSS`. * `resources.PostCSS`: Process your CSS with PostCSS. Config file support (project or theme or passed as an option). * `resources.Minify`: Currently supports `css`, `js`, `json`, `html`, `svg`, `xml`. * `resources.Fingerprint`: Creates a fingerprinted version of the given Resource with Subresource Integrity.. * `resources.Concat`: Concatenates a list of Resource objects. Think of this as a poor man's bundler. * `resources.ExecuteAsTemplate`: Parses and executes the given Resource and data context (e.g. .Site) as a Go template. Fixes #4381 Fixes #4903 Fixes #4858
2018-02-20 09:02:14 +00:00
if x, found := t.Lookup("_internal/shortcodes/" + name); found {
return x
}
Shortcode rewrite, take 2 This commit contains a restructuring and partial rewrite of the shortcode handling. Prior to this commit rendering of the page content was mingled with handling of the shortcodes. This led to several oddities. The new flow is: 1. Shortcodes are extracted from page and replaced with placeholders. 2. Shortcodes are processed and rendered 3. Page is processed 4. The placeholders are replaced with the rendered shortcodes The handling of summaries is also made simpler by this. This commit also introduces some other chenges: 1. distinction between shortcodes that need further processing and those who do not: * `{{< >}}`: Typically raw HTML. Will not be processed. * `{{% %}}`: Will be processed by the page's markup engine (Markdown or (infuture) Asciidoctor) The above also involves a new shortcode-parser, with lexical scanning inspired by Rob Pike's talk called "Lexical Scanning in Go", which should be easier to understand, give better error messages and perform better. 2. If you want to exclude a shortcode from being processed (for documentation etc.), the inner part of the shorcode must be commented out, i.e. `{{%/* movie 47238zzb */%}}`. See the updated shortcode section in the documentation for further examples. The new parser supports nested shortcodes. This isn't new, but has two related design choices worth mentioning: * The shortcodes will be rendered individually, so If both `{{< >}}` and `{{% %}}` are used in the nested hierarchy, one will be passed through the page's markdown processor, the other not. * To avoid potential costly overhead of always looking far ahead for a possible closing tag, this implementation looks at the template itself, and is branded as a container with inner content if it contains a reference to `.Inner` Fixes #565 Fixes #480 Fixes #461 And probably some others.
2014-10-27 20:48:30 +00:00
}
return nil
2013-07-04 15:32:55 +00:00
}
func renderShortcodeWithPage(tmpl tpl.Template, data *ShortcodeWithPage) string {
2015-01-30 19:19:46 +00:00
buffer := bp.GetBuffer()
defer bp.PutBuffer(buffer)
2016-04-09 12:25:33 +00:00
isInnerShortcodeCache.RLock()
2014-01-29 22:50:31 +00:00
err := tmpl.Execute(buffer, data)
2016-04-09 12:25:33 +00:00
isInnerShortcodeCache.RUnlock()
2014-01-29 22:50:31 +00:00
if err != nil {
data.Page.s.Log.ERROR.Printf("error processing shortcode %q for page %q: %s", tmpl.Name(), data.Page.Path(), err)
2014-01-29 22:50:31 +00:00
}
return buffer.String()
2013-07-04 15:32:55 +00:00
}