The main motivation behind this is simplicity and correctnes, but the new small config library is also faster:
```
BenchmarkDefaultConfigProvider/Viper-16 252418 4546 ns/op 2720 B/op 30 allocs/op
BenchmarkDefaultConfigProvider/Custom-16 450756 2651 ns/op 1008 B/op 6 allocs/op
```
Fixes#8633Fixes#8618Fixes#8630
Updates #8591Closes#6680Closes#5192
This is in line with how it behaved before, but it was lifted a little for the project mount for Hugo Modules,
but that could create hard-to-detect loops.
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes#5973Fixes#5996Fixes#6010Fixes#5911Fixes#5940Fixes#6074Fixes#6082Fixes#6092
In short:
* Avoid double tolower in MakeSegment
* Use MakePathSanitized for taxonomies in pageToPermalinkTitle; this matches what MakeSegment does.
* Move the "double hyphen and space" logic into UnicodeSanitize
The last bullet may be slightly breaking for some that now does not get the "--" in some URLs, but we need to reduce the amount of URL logic.
See #4926
Before this commit, you would have to use page bundles to do image processing etc. in Hugo.
This commit adds
* A new `/assets` top-level project or theme dir (configurable via `assetDir`)
* A new template func, `resources.Get` which can be used to "get a resource" that can be further processed.
This means that you can now do this in your templates (or shortcodes):
```bash
{{ $sunset := (resources.Get "images/sunset.jpg").Fill "300x200" }}
```
This also adds a new `extended` build tag that enables powerful SCSS/SASS support with source maps. To compile this from source, you will also need a C compiler installed:
```
HUGO_BUILD_TAGS=extended mage install
```
Note that you can use output of the SCSS processing later in a non-SCSSS-enabled Hugo.
The `SCSS` processor is a _Resource transformation step_ and it can be chained with the many others in a pipeline:
```bash
{{ $css := resources.Get "styles.scss" | resources.ToCSS | resources.PostCSS | resources.Minify | resources.Fingerprint }}
<link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen">
```
The transformation funcs above have aliases, so it can be shortened to:
```bash
{{ $css := resources.Get "styles.scss" | toCSS | postCSS | minify | fingerprint }}
<link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen">
```
A quick tip would be to avoid the fingerprinting part, and possibly also the not-superfast `postCSS` when you're doing development, as it allows Hugo to be smarter about the rebuilding.
Documentation will follow, but have a look at the demo repo in https://github.com/bep/hugo-sass-test
New functions to create `Resource` objects:
* `resources.Get` (see above)
* `resources.FromString`: Create a Resource from a string.
New `Resource` transformation funcs:
* `resources.ToCSS`: Compile `SCSS` or `SASS` into `CSS`.
* `resources.PostCSS`: Process your CSS with PostCSS. Config file support (project or theme or passed as an option).
* `resources.Minify`: Currently supports `css`, `js`, `json`, `html`, `svg`, `xml`.
* `resources.Fingerprint`: Creates a fingerprinted version of the given Resource with Subresource Integrity..
* `resources.Concat`: Concatenates a list of Resource objects. Think of this as a poor man's bundler.
* `resources.ExecuteAsTemplate`: Parses and executes the given Resource and data context (e.g. .Site) as a Go template.
Fixes#4381Fixes#4903Fixes#4858
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes#4460Fixes#4450
A sample config:
```toml
defaultContentLanguage = "en"
defaultContentLanguageInSubdir = true
[Languages]
[Languages.en]
weight = 10
title = "In English"
languageName = "English"
contentDir = "content/english"
[Languages.nn]
weight = 20
title = "På Norsk"
languageName = "Norsk"
contentDir = "content/norwegian"
```
The value of `contentDir` can be any valid path, even absolute path references. The only restriction is that the content dirs cannot overlap.
The content files will be assigned a language by
1. The placement: `content/norwegian/post/my-post.md` will be read as Norwegian content.
2. The filename: `content/english/post/my-post.nn.md` will be read as Norwegian even if it lives in the English content folder.
The content directories will be merged into a big virtual filesystem with one simple rule: The most specific language file will win.
This means that if both `content/norwegian/post/my-post.md` and `content/english/post/my-post.nn.md` exists, they will be considered duplicates and the version inside `content/norwegian` will win.
Note that translations will be automatically assigned by Hugo by the content file's relative placement, so `content/norwegian/post/my-post.md` will be a translation of `content/english/post/my-post.md`.
If this does not work for you, you can connect the translations together by setting a `translationKey` in the content files' front matter.
Fixes#4523Fixes#4552Fixes#4553
This commit is not the smallest in Hugo's history.
Some hightlights include:
* Page bundles (for complete articles, keeping images and content together etc.).
* Bundled images can be processed in as many versions/sizes as you need with the three methods `Resize`, `Fill` and `Fit`.
* Processed images are cached inside `resources/_gen/images` (default) in your project.
* Symbolic links (both files and dirs) are now allowed anywhere inside /content
* A new table based build summary
* The "Total in nn ms" now reports the total including the handling of the files inside /static. So if it now reports more than you're used to, it is just **more real** and probably faster than before (see below).
A site building benchmark run compared to `v0.31.1` shows that this should be slightly faster and use less memory:
```bash
▶ ./benchSite.sh "TOML,num_langs=.*,num_root_sections=5,num_pages=(500|1000),tags_per_page=5,shortcodes,render"
benchmark old ns/op new ns/op delta
BenchmarkSiteBuilding/TOML,num_langs=1,num_root_sections=5,num_pages=500,tags_per_page=5,shortcodes,render-4 101785785 78067944 -23.30%
BenchmarkSiteBuilding/TOML,num_langs=1,num_root_sections=5,num_pages=1000,tags_per_page=5,shortcodes,render-4 185481057 149159919 -19.58%
BenchmarkSiteBuilding/TOML,num_langs=3,num_root_sections=5,num_pages=500,tags_per_page=5,shortcodes,render-4 103149918 85679409 -16.94%
BenchmarkSiteBuilding/TOML,num_langs=3,num_root_sections=5,num_pages=1000,tags_per_page=5,shortcodes,render-4 203515478 169208775 -16.86%
benchmark old allocs new allocs delta
BenchmarkSiteBuilding/TOML,num_langs=1,num_root_sections=5,num_pages=500,tags_per_page=5,shortcodes,render-4 532464 391539 -26.47%
BenchmarkSiteBuilding/TOML,num_langs=1,num_root_sections=5,num_pages=1000,tags_per_page=5,shortcodes,render-4 1056549 772702 -26.87%
BenchmarkSiteBuilding/TOML,num_langs=3,num_root_sections=5,num_pages=500,tags_per_page=5,shortcodes,render-4 555974 406630 -26.86%
BenchmarkSiteBuilding/TOML,num_langs=3,num_root_sections=5,num_pages=1000,tags_per_page=5,shortcodes,render-4 1086545 789922 -27.30%
benchmark old bytes new bytes delta
BenchmarkSiteBuilding/TOML,num_langs=1,num_root_sections=5,num_pages=500,tags_per_page=5,shortcodes,render-4 53243246 43598155 -18.12%
BenchmarkSiteBuilding/TOML,num_langs=1,num_root_sections=5,num_pages=1000,tags_per_page=5,shortcodes,render-4 105811617 86087116 -18.64%
BenchmarkSiteBuilding/TOML,num_langs=3,num_root_sections=5,num_pages=500,tags_per_page=5,shortcodes,render-4 54558852 44545097 -18.35%
BenchmarkSiteBuilding/TOML,num_langs=3,num_root_sections=5,num_pages=1000,tags_per_page=5,shortcodes,render-4 106903858 86978413 -18.64%
```
Fixes#3651Closes#3158Fixes#1014Closes#2021Fixes#1240
Updates #3757
This commit adds support for multiple statDirs both on the global and language level.
A simple `config.toml` example:
```bash
staticDir = ["static1", "static2"]
[languages]
[languages.no]
staticDir = ["staticDir_override", "static_no"]
baseURL = "https://example.no"
languageName = "Norsk"
weight = 1
title = "På norsk"
[languages.en]
staticDir2 = "static_en"
baseURL = "https://example.com"
languageName = "English"
weight = 2
title = "In English"
```
In the above, with no theme used:
the English site will get its static files as a union of "static1", "static2" and "static_en". On file duplicates, the right-most version will win.
the Norwegian site will get its static files as a union of "staticDir_override" and "static_no".
This commit also concludes the Multihost support in #4027.
Fixes#36Closes#4027
All config variables starts with low-case and uses camelCase.
If there is abbreviation at the beginning of the name, the whole
abbreviation will be written in low-case.
If there is abbreviation at the end of the name, the
whole abbreviation will be written in upper-case.
For example, rssURI.
The gain, given the "real sites benchmark" below, is obvious:
```
benchmark old ns/op new ns/op delta
BenchmarkHugo-4 14497594101 13084156335 -9.75%
benchmark old allocs new allocs delta
BenchmarkHugo-4 57404335 48282002 -15.89%
benchmark old bytes new bytes delta
BenchmarkHugo-4 9933505624 9721984424 -2.13%
```
Fixes#2495
Hugo 0.16 announced support for symbolic links for the root folders, /content, /static etc., but this got broken pretty fast.
The main problem this commit tries to solve is the matching of file change events to "what changed".
An example:
ContentDir: /mysites/site/content where /mysites/site/content is a symlink to /mycontent
/mycontent:
/mypost1.md
/post/mypost2.md
* A change to mypost1.md (on OS X) will trigger a file change event with name "/mycontent/mypost1.md"
* A change to mypost2.md gives event with name "/mysites/site/content/mypost2.md"
The first change will not trigger a correct update of Hugo before this commit. This commit fixes this by doing a two-step check:
1. Check if "/mysites/site/content/mypost2.md" is within /mysites/site/content
2. Check if "/mysites/site/content/mypost2.md" is within the real path that /mysites/site/content points to
Fixes#2265Closes#2273
So the taxonomy `Gérard Depardieu` gives paths on the form `gerard-depardieu`.
Unfortunately this introduces two imports from the `golang.org/`, but Unicode-normalization isn't something we'd want to write from scratch.
See https://blog.golang.org/normalization
See #1180
Setting `RelativeURLs` to `true` will make all relative URLs in the site *really* relative.
And will do so with speed.
So:
In `/post/myblogpost.html`:
`/mycss.css` becomes `../mycss.css`
The same in `/index.html` will become:
`./mycss.css` etc.
Note that absolute URLs will not be touched (either external resources, or URLs constructed with `BaseURL`).
The speediness is about the same as before:
```
benchmark old ns/op new ns/op delta
BenchmarkAbsURL 17462 18164 +4.02%
BenchmarkAbsURLSrcset 18842 19632 +4.19%
BenchmarkXMLAbsURLSrcset 18643 19313 +3.59%
BenchmarkXMLAbsURL 9283 9656 +4.02%
benchmark old allocs new allocs delta
BenchmarkAbsURL 24 28 +16.67%
BenchmarkAbsURLSrcset 29 32 +10.34%
BenchmarkXMLAbsURLSrcset 27 30 +11.11%
BenchmarkXMLAbsURL 12 14 +16.67%
benchmark old bytes new bytes delta
BenchmarkAbsURL 3154 3404 +7.93%
BenchmarkAbsURLSrcset 2376 2573 +8.29%
BenchmarkXMLAbsURLSrcset 2569 2763 +7.55%
BenchmarkXMLAbsURL 1888 1998 +5.83%
```
Fixes#1104Fixes#622Fixes#937Fixes#157
Fixes part of issue 1030. Previously hugo only listed the content
directory as being watched. Now we list all files being watched
according to `commands.getDirList()`. We also introduce a RemoveSubpaths
function and test in the helpers module to reduce noise in the command
line output by not showing subdirectories of ones already being watched.
For example, instead of:
`Watching for changes in $HOME/blog/content`
We get:
`Watching for changes in
$HOME/blog/{data,content,layouts,static,themes/my-theme}`
Bjørn Erik Pedersen
Cameron Moore
bogem
Aditya Bhargava
Daniel TISCHER
Anthony Fok
Steve Francia
chrongzhang
Dylan MacKenzie
Cyrill Schumacher