This commit also
* revises the change detection for templates used by content files in server mode.
* Adds a Page.RenderString method
Fixes#6545Fixes#4663Closes#6043
This is a big commit, but it deletes lots of code and simplifies a lot.
* Resolving the template funcs at execution time means we don't have to create template clones per site
* Having a custom map resolver means that we can remove the AST lower case transformation for the special lower case Params map
Not only is the above easier to reason about, it's also faster, especially if you have more than one language, as in the benchmark below:
```
name old time/op new time/op delta
SiteNew/Deep_content_tree-16 53.7ms ± 0% 48.1ms ± 2% -10.38% (p=0.029 n=4+4)
name old alloc/op new alloc/op delta
SiteNew/Deep_content_tree-16 41.0MB ± 0% 36.8MB ± 0% -10.26% (p=0.029 n=4+4)
name old allocs/op new allocs/op delta
SiteNew/Deep_content_tree-16 481k ± 0% 410k ± 0% -14.66% (p=0.029 n=4+4)
```
This should be even better if you also have lots of templates.
Closes#6594
This commmit prepares for the addition of Goldmark as the new Markdown renderer in Hugo.
This introduces a new `markup` package with some common interfaces and each implementation in its own package.
See #5963
In 0.57 we change the behaviour of home.Pages to be in line with the other sections. This has created a lot noise and breakage in the wild.
This commit reverts that change, but adds a warning that we will change this in 0.58 and that you should consider using .Site.RegularPages if that is what you want.
This is preparation for #6041.
For historic reasons, the code for bulding the section tree and the taxonomies were very much separate.
This works, but makes it hard to extend, maintain, and possibly not so fast as it could be.
This simplification also introduces 3 slightly breaking changes, which I suspect most people will be pleased about. See referenced issues:
This commit also switches the radix tree dependency to a mutable implementation: github.com/armon/go-radix.
Fixes#6154Fixes#6153Fixes#6152
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes#5973Fixes#5996Fixes#6010Fixes#5911Fixes#5940Fixes#6074Fixes#6082Fixes#6092
The faulty logic published the bundled resources for the "first output" format.
This worked most of the time, but since the output formats list is sorted,
any output format only used for some of the pages (e.g. CSS) would not work properly.
Fixes#5858
In Hugo 0.55 we connected the taxonomy nodes with their owning Page.
This failed if you had, say, a content file for a author that did not author anything in the site:
```
content/authors/silent-persin/_index.md
```
Fixes#5847
The main motivation of this commit is to add a `page.Page` interface to replace the very file-oriented `hugolib.Page` struct.
This is all a preparation step for issue #5074, "pages from other data sources".
But this also fixes a set of annoying limitations, especially related to custom output formats, and shortcodes.
Most notable changes:
* The inner content of shortcodes using the `{{%` as the outer-most delimiter will now be sent to the content renderer, e.g. Blackfriday.
This means that any markdown will partake in the global ToC and footnote context etc.
* The Custom Output formats are now "fully virtualized". This removes many of the current limitations.
* The taxonomy list type now has a reference to the `Page` object.
This improves the taxonomy template `.Title` situation and make common template constructs much simpler.
See #5074Fixes#5763Fixes#5758Fixes#5090Fixes#5204Fixes#4695Fixes#5607Fixes#5707Fixes#5719Fixes#3113Fixes#5706Fixes#5767Fixes#5723Fixes#5769Fixes#5770Fixes#5771Fixes#5759Fixes#5776Fixes#5777Fixes#5778
This commit adds support for a configuration directory (default `config`). The different pieces in this puzzle are:
* A new `--environment` (or `-e`) flag. This can also be set with the `HUGO_ENVIRONMENT` OS environment variable. The value for `environment` defaults to `production` when running `hugo` and `development` when running `hugo server`. You can set it to any value you want (e.g. `hugo server -e "Sensible Environment"`), but as it is used to load configuration from the file system, the letter case may be important. You can get this value in your templates with `{{ hugo.Environment }}`.
* A new `--configDir` flag (defaults to `config` below your project). This can also be set with `HUGO_CONFIGDIR` OS environment variable.
If the `configDir` exists, the configuration files will be read and merged on top of each other from left to right; the right-most value will win on duplicates.
Given the example tree below:
If `environment` is `production`, the left-most `config.toml` would be the one directly below the project (this can now be omitted if you want), and then `_default/config.toml` and finally `production/config.toml`. And since these will be merged, you can just provide the environment specific configuration setting in you production config, e.g. `enableGitInfo = true`. The order within the directories will be lexical (`config.toml` and then `params.toml`).
```bash
config
├── _default
│ ├── config.toml
│ ├── languages.toml
│ ├── menus
│ │ ├── menus.en.toml
│ │ └── menus.zh.toml
│ └── params.toml
├── development
│ └── params.toml
└── production
├── config.toml
└── params.toml
```
Some configuration maps support the language code in the filename (e.g. `menus.en.toml`): `menus` (`menu` also works) and `params`.
Also note that the only folders with "a meaning" in the above listing is the top level directories below `config`. The `menus` sub folder is just added for better organization.
We use `TOML` in the example above, but Hugo also supports `JSON` and `YAML` as configuration formats. These can be mixed.
Fixes#5422
This means that the current `.Site` and ´.Hugo` is available as a globals, so you can do `site.IsServer`, `hugo.Version` etc.
Fixes#5470Fixes#5467Fixes#5503
This commit also pulls down the log level for a set of WARN statements to INFO. There should be no ERRORs or WARNINGs in a regular Hugo build. That is the story about the Boy Who Cried Wolf.
Since the WARN log is now more visible, this commit also improves on some of them, most notable the "layout not found", which now would look something like this:
```bash
WARN 2018/11/02 09:02:18 Found no layout for "home", language "en", output format "CSS": create a template below /layouts with one of these filenames: index.en.css.css, home.en.css.css, list.en.css.css, index.css.css, home.css.css, list.css.css, index.en.css, home.en.css, list.en.css, index.css, home.css, list.css, _default/index.en.css.css, _default/home.en.css.css, _default/list.en.css.css, _default/index.css.css, _default/home.css.css, _default/list.css.css, _default/index.en.css, _default/home.en.css, _default/list.en.css, _default/index.css, _default/home.css, _default/list.css
```
Fixes#5203
The main item in this commit is showing of errors with a file context when running `hugo server`.
This can be turned off: `hugo server --disableBrowserError` (can also be set in `config.toml`).
But to get there, the error handling in Hugo needed a revision. There are some items left TODO for commits soon to follow, most notable errors in content and config files.
Fixes#5284Fixes#5290
See #5325
See #5324
Introduce new page position variables in order to fix the ordering issue
of `.Next` and `.Prev` while also allowing an upgrade path via
deprecation.
`.NextInSection` becomes `.NextPageInSection`.
`.PrevInSection` becomes `.PrevPageInSection`.
`.Next` becomes a function returning `.PrevPage`.
`.Prev` becomes a function returning `.NextPage`.
Fixes#1061
This extends the page grouping in Hugo with a template function that allows for ad-hoc grouping.
A made-up example:
```
{{ $cool := where .Site.RegularPages "Params.cool" true | group "cool" }}
{{ $blue := where .Site.RegularPages "Params.blue" true | group "blue" }}
{{ $paginator := .Paginate (slice $cool $blue) }}
```
Closes#4865
If a content file contains shortcode(s), we have logic in place to re-render it per output format.
We also have logic in place that avoids making a copy of the content used for this process if we don't need it.
This was before this commit limited to server mode and if the page should be output to multiple formats.
But there is a third case: If a site (language) borrows and renders `.Content` from another language. This would, before this commit, behave oddly for content with shortcodes.
Fixes#4986
Two new settings:
* refLinksErrorLevel: ERROR (default) or WARNING. ERROR will fail the build.
* refLinksNotFoundURL: Used as a placeholder when page references cannot be found.
Fixes#4964
This commit is a follow up to a recent overhaul of the GetPage/ref/relref implemenation.
The most important change in this commit is the update to `.Site.GetPage`:
* To reduce the amount of breakage in the wild to its minimum, I have reworked .Site.GetPage with some rules:
* We cannot support more than 2 arguments, i.e. .Site.GetPage "page" "posts" "mypage.md" will now throw an error. I think this is the most uncommon syntax and should be OK. It is an easy fix to change the above to .Site.GetPage "/posts/mypage.md" or similar.
* .Site.GetPage "home", .Site.GetPage "home" "" and .Site.GetPage "home" "/" will give you the home page. This means that if you have page in root with the name home.md you need to do .Site.GetPage "/home.md" or similar
This commit also fixes some multilingual issues, most notable it is now possible to do cross-language ref/relref lookups by prepending the language code to the path, e.g. `/jp/posts/mypage.md`.
This commit also reverts the site building tests related to this to "Hugo 0.44 state", to get better control of the changes made.
Closes#4147Closes#4727Closes#4728Closes#4728Closes#4726Closes#4652
This commit unifies the core internal page index for all page kinds.
This enables the `ref` and `relref` shortcodes to support all pages kinds, and adds a new page-relative `.GetPage` method with simplified signature.
See #4147
See #4727
See #4728
See #4728
See #4726
See #4652
Bjørn Erik Pedersen
Janus
Ricardo N Feliciano
Cameron Moore
Vas Sudanagunta