Blinky example copied from microzig-examples
This commit is contained in:
commit
7570b01cf3
|
@ -0,0 +1,59 @@
|
|||
const std = @import("std");
|
||||
const rp2040 = @import("rp2040");
|
||||
|
||||
const available_examples = [_]Example{
|
||||
.{ .name = "pico_adc", .target = rp2040.boards.raspberry_pi.pico, .file = "src/adc.zig" },
|
||||
.{ .name = "pico_blinky", .target = rp2040.boards.raspberry_pi.pico, .file = "src/blinky.zig" },
|
||||
// TODO: Fix multicore hal! .{ .name = "pico", .target = rp2040.boards.raspberry_pi.pico , .file = "src/blinky_core1.zig" },
|
||||
.{ .name = "pico_flash-program", .target = rp2040.boards.raspberry_pi.pico, .file = "src/flash_program.zig" },
|
||||
.{ .name = "pico_gpio-clk", .target = rp2040.boards.raspberry_pi.pico, .file = "src/gpio_clk.zig" },
|
||||
.{ .name = "pico_i2c-bus-scan", .target = rp2040.boards.raspberry_pi.pico, .file = "src/i2c_bus_scan.zig" },
|
||||
.{ .name = "pico_pwm", .target = rp2040.boards.raspberry_pi.pico, .file = "src/pwm.zig" },
|
||||
.{ .name = "pico_random", .target = rp2040.boards.raspberry_pi.pico, .file = "src/random.zig" },
|
||||
.{ .name = "pico_spi-master", .target = rp2040.boards.raspberry_pi.pico, .file = "src/spi_master.zig" },
|
||||
.{ .name = "pico_squarewave", .target = rp2040.boards.raspberry_pi.pico, .file = "src/squarewave.zig" },
|
||||
.{ .name = "pico_uart", .target = rp2040.boards.raspberry_pi.pico, .file = "src/uart.zig" },
|
||||
.{ .name = "pico_usb-device", .target = rp2040.boards.raspberry_pi.pico, .file = "src/usb_device.zig" },
|
||||
.{ .name = "pico_usb-hid", .target = rp2040.boards.raspberry_pi.pico, .file = "src/usb_hid.zig" },
|
||||
.{ .name = "pico_ws2812", .target = rp2040.boards.raspberry_pi.pico, .file = "src/ws2812.zig" },
|
||||
|
||||
.{ .name = "rp2040-matrix_tiles", .target = rp2040.boards.waveshare.rp2040_matrix, .file = "src/tiles.zig" },
|
||||
|
||||
// .{ .name = "rp2040-eth", .target = rp2040.boards.waveshare.rp2040_eth },
|
||||
// .{ .name = "rp2040-plus-4m", .target = rp2040.boards.waveshare.rp2040_plus_4m },
|
||||
// .{ .name = "rp2040-plus-16m", .target = rp2040.boards.waveshare.rp2040_plus_16m },
|
||||
};
|
||||
|
||||
pub fn build(b: *std.Build) void {
|
||||
const microzig = @import("microzig").init(b, "microzig");
|
||||
const optimize = b.standardOptimizeOption(.{});
|
||||
|
||||
for (available_examples) |example| {
|
||||
// `addFirmware` basically works like addExecutable, but takes a
|
||||
// `microzig.Target` for target instead of a `std.zig.CrossTarget`.
|
||||
//
|
||||
// The target will convey all necessary information on the chip,
|
||||
// cpu and potentially the board as well.
|
||||
const firmware = microzig.addFirmware(b, .{
|
||||
.name = example.name,
|
||||
.target = example.target,
|
||||
.optimize = optimize,
|
||||
.source_file = .{ .path = example.file },
|
||||
});
|
||||
|
||||
// `installFirmware()` is the MicroZig pendant to `Build.installArtifact()`
|
||||
// and allows installing the firmware as a typical firmware file.
|
||||
//
|
||||
// This will also install into `$prefix/firmware` instead of `$prefix/bin`.
|
||||
microzig.installFirmware(b, firmware, .{});
|
||||
|
||||
// For debugging, we also always install the firmware as an ELF file
|
||||
microzig.installFirmware(b, firmware, .{ .format = .elf });
|
||||
}
|
||||
}
|
||||
|
||||
const Example = struct {
|
||||
target: @import("microzig").Target,
|
||||
name: []const u8,
|
||||
file: []const u8,
|
||||
};
|
|
@ -0,0 +1,14 @@
|
|||
.{
|
||||
.name = "microzig-raspberrypi-rp2040-examples",
|
||||
.version = "0.1.0",
|
||||
.dependencies = .{
|
||||
.microzig = .{
|
||||
.url = "https://github.com/ZigEmbeddedGroup/microzig/archive/c6c9ec4516f57638e751141085c9d76120990312.tar.gz",
|
||||
.hash = "1220af58bdaa721b8189f3a7adfda660517dd354463463388e96d69fe4ceccf80b92",
|
||||
},
|
||||
.rp2040 = .{
|
||||
.url = "https://github.com/ZigEmbeddedGroup/raspberrypi-rp2040/archive/67d36eebb0fbd89633db1a51d6d2bcb049f2066a.tar.gz",
|
||||
.hash = "122094bf268f45b188f3916f9e5964f4257414afaafba98a455ac47d25389a456832",
|
||||
},
|
||||
},
|
||||
}
|
|
@ -0,0 +1,20 @@
|
|||
const std = @import("std");
|
||||
const microzig = @import("microzig");
|
||||
const rp2040 = microzig.hal;
|
||||
const time = rp2040.time;
|
||||
|
||||
const pin_config = rp2040.pins.GlobalConfiguration{
|
||||
.GPIO25 = .{
|
||||
.name = "led",
|
||||
.direction = .out,
|
||||
},
|
||||
};
|
||||
|
||||
pub fn main() !void {
|
||||
const pins = pin_config.apply();
|
||||
|
||||
while (true) {
|
||||
pins.led.toggle();
|
||||
time.sleep_ms(250);
|
||||
}
|
||||
}
|
Loading…
Reference in New Issue