Initial commit for the Creative ZEN X-Fi2 and X-Fi3 ports
These are really similar devices so one commit for both is ok. Change-Id: I8bd1d3fef1eb6d00aaadfb7af56c771f62d0c9c3
This commit is contained in:
Amaury Pouly
parent
e09c1e3d43
commit
12c64a4b79
|
|
@ -236,6 +236,10 @@ keymaps/keymap-meizu-m6sp.c
|
|||
keymaps/keymap-creativezvm.c
|
||||
#elif CONFIG_KEYPAD == CREATIVEZV_PAD
|
||||
keymaps/keymap-creativezv.c
|
||||
#elif CONFIG_KEYPAD == CREATIVE_ZENXFI2_PAD
|
||||
keymaps/keymap-zenxfi2.c
|
||||
#elif CONFIG_KEYPAD == CREATIVE_ZENXFI3_PAD
|
||||
keymaps/keymap-zenxfi3.c
|
||||
#elif CONFIG_KEYPAD == PHILIPS_SA9200_PAD
|
||||
keymaps/keymap-sa9200.c
|
||||
#elif CONFIG_KEYPAD == PHILIPS_HDD1630_PAD
|
||||
|
|
|
|||
|
|
@ -0,0 +1,184 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2012 Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* Button Code Definitions for the Creative ZEN X-Fi2 target */
|
||||
/* NB: Up/Down/Left/Right are not physical buttons - touchscreen emulation */
|
||||
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
#include <stdlib.h>
|
||||
|
||||
#include "config.h"
|
||||
#include "action.h"
|
||||
#include "button.h"
|
||||
#include "settings.h"
|
||||
|
||||
/*
|
||||
* The format of the list is as follows
|
||||
* { Action Code, Button code, Prereq button code }
|
||||
* if there's no need to check the previous button's value, use BUTTON_NONE
|
||||
* Insert LAST_ITEM_IN_LIST at the end of each mapping
|
||||
*/
|
||||
|
||||
static const struct button_mapping button_context_standard[] = {
|
||||
{ ACTION_STD_OK, BUTTON_MENU|BUTTON_REL, BUTTON_MENU },
|
||||
{ ACTION_STD_CANCEL, BUTTON_POWER, BUTTON_NONE },
|
||||
|
||||
{ ACTION_STD_CONTEXT, BUTTON_MENU|BUTTON_REPEAT, BUTTON_MENU },
|
||||
|
||||
LAST_ITEM_IN_LIST
|
||||
}; /* button_context_standard */
|
||||
|
||||
|
||||
static const struct button_mapping button_context_wps[] = {
|
||||
{ ACTION_WPS_MENU, BUTTON_MENU|BUTTON_REL, BUTTON_MENU },
|
||||
{ ACTION_WPS_CONTEXT, BUTTON_MENU|BUTTON_REPEAT, BUTTON_MENU },
|
||||
|
||||
LAST_ITEM_IN_LIST
|
||||
}; /* button_context_wps */
|
||||
|
||||
static const struct button_mapping button_context_list[] = {
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_STD)
|
||||
}; /* button_context_list */
|
||||
|
||||
static const struct button_mapping button_context_tree[] = {
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_LIST)
|
||||
}; /* button_context_tree */
|
||||
|
||||
static const struct button_mapping button_context_listtree_scroll_with_combo[] = {
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_CUSTOM|CONTEXT_TREE),
|
||||
};
|
||||
|
||||
static const struct button_mapping button_context_listtree_scroll_without_combo[] = {
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_CUSTOM|CONTEXT_TREE),
|
||||
};
|
||||
|
||||
static const struct button_mapping button_context_settings[] = {
|
||||
{ ACTION_STD_OK, BUTTON_MENU, BUTTON_NONE },
|
||||
{ ACTION_STD_CANCEL, BUTTON_POWER, BUTTON_NONE },
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_STD)
|
||||
}; /* button_context_settings */
|
||||
|
||||
static const struct button_mapping button_context_settings_right_is_inc[] = {
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_STD)
|
||||
}; /* button_context_settingsgraphical */
|
||||
|
||||
static const struct button_mapping button_context_yesno[] = {
|
||||
{ ACTION_YESNO_ACCEPT, BUTTON_MENU, BUTTON_NONE },
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_STD)
|
||||
}; /* button_context_settings_yesno */
|
||||
|
||||
static const struct button_mapping button_context_colorchooser[] = {
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_CUSTOM|CONTEXT_SETTINGS),
|
||||
}; /* button_context_colorchooser */
|
||||
|
||||
static const struct button_mapping button_context_eq[] = {
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_CUSTOM|CONTEXT_SETTINGS),
|
||||
}; /* button_context_eq */
|
||||
|
||||
/** Bookmark Screen **/
|
||||
static const struct button_mapping button_context_bmark[] = {
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_LIST),
|
||||
}; /* button_context_bmark */
|
||||
|
||||
static const struct button_mapping button_context_time[] = {
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_SETTINGS),
|
||||
}; /* button_context_time */
|
||||
|
||||
static const struct button_mapping button_context_quickscreen[] = {
|
||||
{ ACTION_STD_CANCEL, BUTTON_POWER|BUTTON_REL, BUTTON_NONE },
|
||||
{ ACTION_STD_CANCEL, BUTTON_MENU|BUTTON_REL, BUTTON_NONE },
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_STD)
|
||||
}; /* button_context_quickscreen */
|
||||
|
||||
static const struct button_mapping button_context_pitchscreen[] = {
|
||||
{ ACTION_PS_EXIT, BUTTON_POWER, BUTTON_NONE },
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_STD)
|
||||
}; /* button_context_pitchcreen */
|
||||
|
||||
static const struct button_mapping button_context_keyboard[] = {
|
||||
{ ACTION_KBD_PAGE_FLIP, BUTTON_MENU, BUTTON_NONE },
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_STD)
|
||||
}; /* button_context_keyboard */
|
||||
|
||||
static const struct button_mapping button_context_radio[] = {
|
||||
{ ACTION_FM_MENU, BUTTON_MENU|BUTTON_REL, BUTTON_NONE },
|
||||
{ ACTION_FM_PRESET, BUTTON_MENU|BUTTON_REPEAT, BUTTON_NONE },
|
||||
{ ACTION_FM_STOP, BUTTON_POWER, BUTTON_NONE },
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_SETTINGS)
|
||||
}; /* button_context_radio */
|
||||
|
||||
const struct button_mapping* target_get_context_mapping(int context)
|
||||
{
|
||||
switch (context)
|
||||
{
|
||||
case CONTEXT_STD:
|
||||
return button_context_standard;
|
||||
case CONTEXT_WPS:
|
||||
return button_context_wps;
|
||||
|
||||
case CONTEXT_LIST:
|
||||
return button_context_list;
|
||||
case CONTEXT_MAINMENU:
|
||||
case CONTEXT_TREE:
|
||||
if (global_settings.hold_lr_for_scroll_in_list)
|
||||
return button_context_listtree_scroll_without_combo;
|
||||
else
|
||||
return button_context_listtree_scroll_with_combo;
|
||||
case CONTEXT_CUSTOM|CONTEXT_TREE:
|
||||
return button_context_tree;
|
||||
|
||||
case CONTEXT_SETTINGS:
|
||||
return button_context_settings;
|
||||
case CONTEXT_CUSTOM|CONTEXT_SETTINGS:
|
||||
case CONTEXT_SETTINGS_RECTRIGGER:
|
||||
return button_context_settings_right_is_inc;
|
||||
|
||||
case CONTEXT_SETTINGS_COLOURCHOOSER:
|
||||
return button_context_colorchooser;
|
||||
case CONTEXT_SETTINGS_EQ:
|
||||
return button_context_eq;
|
||||
|
||||
case CONTEXT_SETTINGS_TIME:
|
||||
return button_context_time;
|
||||
|
||||
case CONTEXT_YESNOSCREEN:
|
||||
return button_context_yesno;
|
||||
case CONTEXT_FM:
|
||||
return button_context_radio;
|
||||
case CONTEXT_BOOKMARKSCREEN:
|
||||
return button_context_bmark;
|
||||
case CONTEXT_QUICKSCREEN:
|
||||
return button_context_quickscreen;
|
||||
case CONTEXT_PITCHSCREEN:
|
||||
return button_context_pitchscreen;
|
||||
case CONTEXT_KEYBOARD:
|
||||
return button_context_keyboard;
|
||||
}
|
||||
return button_context_standard;
|
||||
}
|
||||
|
|
@ -0,0 +1,327 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2012 Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* Button Code Definitions for the Creative ZEN X-Fi3 target */
|
||||
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
#include <stdlib.h>
|
||||
|
||||
#include "config.h"
|
||||
#include "action.h"
|
||||
#include "button.h"
|
||||
#include "settings.h"
|
||||
|
||||
/*
|
||||
* The format of the list is as follows
|
||||
* { Action Code, Button code, Prereq button code }
|
||||
* if there's no need to check the previous button's value, use BUTTON_NONE
|
||||
* Insert LAST_ITEM_IN_LIST at the end of each mapping
|
||||
*/
|
||||
|
||||
static const struct button_mapping button_context_standard[] = {
|
||||
{ ACTION_STD_PREV, BUTTON_UP, BUTTON_NONE },
|
||||
{ ACTION_STD_PREVREPEAT, BUTTON_UP|BUTTON_REPEAT, BUTTON_NONE },
|
||||
{ ACTION_STD_NEXT, BUTTON_DOWN, BUTTON_NONE },
|
||||
{ ACTION_STD_NEXTREPEAT, BUTTON_DOWN|BUTTON_REPEAT, BUTTON_NONE },
|
||||
|
||||
{ ACTION_STD_CONTEXT, BUTTON_MENU|BUTTON_REPEAT, BUTTON_MENU },
|
||||
|
||||
{ ACTION_STD_CANCEL, BUTTON_LEFT, BUTTON_NONE },
|
||||
{ ACTION_STD_CANCEL, BUTTON_LEFT|BUTTON_REPEAT, BUTTON_NONE },
|
||||
{ ACTION_STD_OK, BUTTON_RIGHT|BUTTON_REL, BUTTON_RIGHT },
|
||||
|
||||
{ ACTION_STD_KEYLOCK, BUTTON_POWER, BUTTON_NONE },
|
||||
|
||||
LAST_ITEM_IN_LIST
|
||||
}; /* button_context_standard */
|
||||
|
||||
static const struct button_mapping button_context_wps[] = {
|
||||
{ ACTION_WPS_PLAY, BUTTON_PLAY|BUTTON_REL, BUTTON_PLAY },
|
||||
{ ACTION_WPS_STOP, BUTTON_PLAY|BUTTON_REPEAT, BUTTON_NONE },
|
||||
|
||||
{ ACTION_WPS_SKIPNEXT, BUTTON_DOWN|BUTTON_REL, BUTTON_DOWN },
|
||||
{ ACTION_WPS_SEEKFWD, BUTTON_DOWN|BUTTON_REPEAT, BUTTON_NONE },
|
||||
{ ACTION_WPS_SKIPPREV, BUTTON_UP|BUTTON_REL, BUTTON_UP },
|
||||
{ ACTION_WPS_SEEKBACK, BUTTON_UP|BUTTON_REPEAT, BUTTON_NONE },
|
||||
{ ACTION_WPS_STOPSEEK, BUTTON_UP|BUTTON_REL, BUTTON_UP|BUTTON_REPEAT },
|
||||
{ ACTION_WPS_STOPSEEK, BUTTON_DOWN|BUTTON_REL, BUTTON_DOWN|BUTTON_REPEAT },
|
||||
|
||||
{ ACTION_WPS_VOLUP, BUTTON_VOL_UP, BUTTON_NONE },
|
||||
{ ACTION_WPS_VOLUP, BUTTON_VOL_UP|BUTTON_REPEAT, BUTTON_NONE },
|
||||
|
||||
{ ACTION_WPS_VOLDOWN, BUTTON_VOL_DOWN, BUTTON_NONE },
|
||||
{ ACTION_WPS_VOLDOWN, BUTTON_VOL_DOWN|BUTTON_REPEAT, BUTTON_NONE },
|
||||
|
||||
{ ACTION_WPS_MENU, BUTTON_BACK, BUTTON_NONE },
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_STD)
|
||||
}; /* button_context_wps */
|
||||
|
||||
static const struct button_mapping button_context_keyboard[] = {
|
||||
{ ACTION_KBD_LEFT, BUTTON_LEFT, BUTTON_NONE },
|
||||
{ ACTION_KBD_LEFT, BUTTON_LEFT|BUTTON_REPEAT, BUTTON_NONE },
|
||||
{ ACTION_KBD_RIGHT, BUTTON_RIGHT, BUTTON_NONE },
|
||||
{ ACTION_KBD_RIGHT, BUTTON_RIGHT|BUTTON_REPEAT, BUTTON_NONE },
|
||||
{ ACTION_KBD_UP, BUTTON_UP, BUTTON_NONE },
|
||||
{ ACTION_KBD_UP, BUTTON_UP|BUTTON_REPEAT, BUTTON_NONE },
|
||||
{ ACTION_KBD_DOWN, BUTTON_DOWN, BUTTON_NONE },
|
||||
{ ACTION_KBD_DOWN, BUTTON_DOWN|BUTTON_REPEAT, BUTTON_NONE },
|
||||
|
||||
{ ACTION_KBD_SELECT, BUTTON_MENU, BUTTON_NONE },
|
||||
{ ACTION_KBD_DONE, BUTTON_MENU|BUTTON_REPEAT, BUTTON_MENU },
|
||||
{ ACTION_KBD_ABORT, BUTTON_POWER, BUTTON_NONE },
|
||||
|
||||
{ ACTION_KBD_MORSE_INPUT, BUTTON_VOL_UP, BUTTON_NONE },
|
||||
{ ACTION_KBD_MORSE_SELECT, BUTTON_VOL_DOWN|BUTTON_REL, BUTTON_NONE },
|
||||
|
||||
LAST_ITEM_IN_LIST
|
||||
}; /* button_context_keyboard */
|
||||
|
||||
static const struct button_mapping button_context_quickscreen[] = {
|
||||
{ ACTION_STD_CANCEL, BUTTON_POWER, BUTTON_NONE },
|
||||
{ ACTION_STD_CANCEL, BUTTON_MENU, BUTTON_NONE },
|
||||
{ ACTION_QS_TOP, BUTTON_UP, BUTTON_NONE },
|
||||
{ ACTION_QS_DOWN, BUTTON_DOWN, BUTTON_NONE },
|
||||
{ ACTION_QS_LEFT, BUTTON_LEFT, BUTTON_NONE },
|
||||
{ ACTION_QS_RIGHT, BUTTON_RIGHT, BUTTON_NONE },
|
||||
|
||||
LAST_ITEM_IN_LIST
|
||||
}; /* button_context_quickscreen */
|
||||
|
||||
static const struct button_mapping button_context_tree[] = {
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_LIST)
|
||||
}; /* button_context_tree */
|
||||
|
||||
static const struct button_mapping button_context_list[] = {
|
||||
#ifdef HAVE_VOLUME_IN_LIST
|
||||
{ ACTION_LIST_VOLUP, BUTTON_VOL_UP, BUTTON_NONE },
|
||||
{ ACTION_LIST_VOLUP, BUTTON_VOL_UP|BUTTON_REPEAT, BUTTON_NONE },
|
||||
{ ACTION_LIST_VOLDOWN, BUTTON_VOL_DOWN, BUTTON_NONE },
|
||||
{ ACTION_LIST_VOLDOWN, BUTTON_VOL_DOWN|BUTTON_REPEAT, BUTTON_NONE },
|
||||
#endif
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_STD)
|
||||
}; /* button_context_list */
|
||||
|
||||
#ifdef CONFIG_TUNER
|
||||
static const struct button_mapping button_context_radio[] = {
|
||||
{ ACTION_FM_MENU, BUTTON_MENU, BUTTON_NONE },
|
||||
{ ACTION_FM_PLAY, BUTTON_PLAY|BUTTON_REL, BUTTON_PLAY },
|
||||
{ ACTION_FM_STOP, BUTTON_PLAY|BUTTON_REPEAT, BUTTON_NONE },
|
||||
|
||||
{ ACTION_FM_EXIT, BUTTON_BACK, BUTTON_NONE },
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_SETTINGS)
|
||||
}; /* button_context_radio */
|
||||
#endif
|
||||
|
||||
#ifdef HAVE_RECORDING
|
||||
static const struct button_mapping button_context_recscreen[] = {
|
||||
{ ACTION_REC_PAUSE, BUTTON_PLAY|BUTTON_REL, BUTTON_PLAY },
|
||||
{ ACTION_SETTINGS_INC, BUTTON_UP, BUTTON_NONE },
|
||||
{ ACTION_SETTINGS_INCREPEAT, BUTTON_UP|BUTTON_REPEAT, BUTTON_NONE },
|
||||
{ ACTION_SETTINGS_DEC, BUTTON_DOWN, BUTTON_NONE },
|
||||
{ ACTION_SETTINGS_DECREPEAT, BUTTON_DOWN|BUTTON_REPEAT, BUTTON_NONE },
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_STD)
|
||||
}; /* button_context_recscreen */
|
||||
#endif
|
||||
|
||||
static const struct button_mapping button_context_settings[] = {
|
||||
/* we overwrite this to avoid select from std */
|
||||
{ ACTION_NONE, BUTTON_RIGHT|BUTTON_REL, BUTTON_RIGHT },
|
||||
|
||||
{ ACTION_SETTINGS_INC, BUTTON_VOL_UP, BUTTON_NONE },
|
||||
{ ACTION_SETTINGS_INCREPEAT, BUTTON_VOL_UP|BUTTON_REPEAT, BUTTON_NONE },
|
||||
{ ACTION_SETTINGS_DEC, BUTTON_VOL_DOWN, BUTTON_NONE },
|
||||
{ ACTION_SETTINGS_DECREPEAT, BUTTON_VOL_DOWN|BUTTON_REPEAT, BUTTON_NONE },
|
||||
|
||||
{ ACTION_STD_PREV, BUTTON_UP, BUTTON_NONE },
|
||||
{ ACTION_STD_PREVREPEAT, BUTTON_UP|BUTTON_REPEAT, BUTTON_NONE },
|
||||
{ ACTION_STD_NEXT, BUTTON_DOWN, BUTTON_NONE },
|
||||
{ ACTION_STD_NEXTREPEAT, BUTTON_DOWN|BUTTON_REPEAT, BUTTON_NONE },
|
||||
|
||||
{ ACTION_STD_OK, BUTTON_PLAY|BUTTON_REL, BUTTON_PLAY },
|
||||
{ ACTION_SETTINGS_RESET, BUTTON_PLAY|BUTTON_REPEAT, BUTTON_NONE },
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_STD)
|
||||
}; /* button_context_settings */
|
||||
|
||||
static const struct button_mapping button_context_time[] = {
|
||||
|
||||
{ ACTION_STD_CANCEL, BUTTON_BACK, BUTTON_NONE },
|
||||
{ ACTION_STD_OK, BUTTON_PLAY, BUTTON_NONE },
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_SETTINGS)
|
||||
}; /* button_context_time */
|
||||
|
||||
static const struct button_mapping button_context_colorchooser[] = {
|
||||
{ ACTION_STD_OK, BUTTON_PLAY|BUTTON_REL, BUTTON_PLAY },
|
||||
{ ACTION_STD_CANCEL, BUTTON_BACK, BUTTON_NONE },
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_CUSTOM|CONTEXT_SETTINGS),
|
||||
}; /* button_context_colorchooser */
|
||||
|
||||
static const struct button_mapping button_context_eq[] = {
|
||||
{ ACTION_STD_OK, BUTTON_PLAY|BUTTON_REL, BUTTON_PLAY },
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_CUSTOM|CONTEXT_SETTINGS),
|
||||
}; /* button_context_eq */
|
||||
|
||||
/* Bookmark Screen */
|
||||
static const struct button_mapping button_context_bmark[] = {
|
||||
{ ACTION_BMS_DELETE, BUTTON_PLAY|BUTTON_REPEAT, BUTTON_PLAY },
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_LIST),
|
||||
}; /* button_context_bmark */
|
||||
|
||||
static const struct button_mapping button_context_pitchscreen[] = {
|
||||
|
||||
{ ACTION_PS_INC_SMALL, BUTTON_UP, BUTTON_NONE },
|
||||
{ ACTION_PS_INC_BIG, BUTTON_UP|BUTTON_REPEAT, BUTTON_NONE },
|
||||
{ ACTION_PS_DEC_SMALL, BUTTON_DOWN, BUTTON_NONE },
|
||||
{ ACTION_PS_DEC_BIG, BUTTON_DOWN|BUTTON_REPEAT, BUTTON_NONE },
|
||||
|
||||
{ ACTION_PS_RESET, BUTTON_PLAY, BUTTON_NONE },
|
||||
{ ACTION_PS_EXIT, BUTTON_BACK, BUTTON_NONE },
|
||||
|
||||
LAST_ITEM_IN_LIST
|
||||
}; /* button_context_pitchcreen */
|
||||
|
||||
static const struct button_mapping button_context_yesno[] = {
|
||||
{ ACTION_YESNO_ACCEPT, BUTTON_PLAY, BUTTON_NONE },
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_STD)
|
||||
}; /* button_context_yesno */
|
||||
|
||||
#ifdef USB_ENABLE_HID
|
||||
static const struct button_mapping button_context_usb_hid[] = {
|
||||
{ ACTION_USB_HID_MODE_SWITCH_NEXT, BUTTON_POWER|BUTTON_REL, BUTTON_POWER },
|
||||
{ ACTION_USB_HID_MODE_SWITCH_PREV, BUTTON_POWER|BUTTON_REPEAT, BUTTON_POWER },
|
||||
|
||||
LAST_ITEM_IN_LIST
|
||||
}; /* button_context_usb_hid */
|
||||
|
||||
static const struct button_mapping button_context_usb_hid_mode_multimedia[] = {
|
||||
|
||||
{ ACTION_USB_HID_MULTIMEDIA_VOLUME_DOWN, BUTTON_VOL_DOWN, BUTTON_NONE },
|
||||
{ ACTION_USB_HID_MULTIMEDIA_VOLUME_DOWN, BUTTON_VOL_DOWN|BUTTON_REPEAT, BUTTON_NONE },
|
||||
{ ACTION_USB_HID_MULTIMEDIA_VOLUME_UP, BUTTON_VOL_UP, BUTTON_NONE },
|
||||
{ ACTION_USB_HID_MULTIMEDIA_VOLUME_UP, BUTTON_VOL_UP|BUTTON_REPEAT, BUTTON_NONE },
|
||||
{ ACTION_USB_HID_MULTIMEDIA_VOLUME_MUTE, BUTTON_BACK|BUTTON_REL, BUTTON_BACK },
|
||||
{ ACTION_USB_HID_MULTIMEDIA_PLAYBACK_PLAY_PAUSE, BUTTON_PLAY|BUTTON_REL, BUTTON_PLAY },
|
||||
{ ACTION_USB_HID_MULTIMEDIA_PLAYBACK_STOP, BUTTON_PLAY|BUTTON_REPEAT, BUTTON_PLAY },
|
||||
{ ACTION_USB_HID_MULTIMEDIA_PLAYBACK_TRACK_PREV, BUTTON_UP|BUTTON_REL, BUTTON_UP },
|
||||
{ ACTION_USB_HID_MULTIMEDIA_PLAYBACK_TRACK_NEXT, BUTTON_DOWN|BUTTON_REL, BUTTON_DOWN },
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_USB_HID)
|
||||
}; /* button_context_usb_hid_mode_multimedia */
|
||||
|
||||
|
||||
static const struct button_mapping button_context_usb_hid_mode_presentation[] = {
|
||||
{ ACTION_USB_HID_PRESENTATION_SLIDESHOW_START, BUTTON_PLAY|BUTTON_REL, BUTTON_PLAY },
|
||||
{ ACTION_USB_HID_PRESENTATION_SLIDESHOW_LEAVE, BUTTON_PLAY|BUTTON_REPEAT, BUTTON_PLAY },
|
||||
{ ACTION_USB_HID_PRESENTATION_SLIDE_PREV, BUTTON_UP|BUTTON_REL, BUTTON_UP },
|
||||
{ ACTION_USB_HID_PRESENTATION_SLIDE_NEXT, BUTTON_DOWN|BUTTON_REL, BUTTON_DOWN },
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_USB_HID)
|
||||
}; /* button_context_usb_hid_mode_presentation */
|
||||
|
||||
static const struct button_mapping button_context_usb_hid_mode_browser[] = {
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_USB_HID)
|
||||
}; /* button_context_usb_hid_mode_browser */
|
||||
|
||||
#ifdef HAVE_USB_HID_MOUSE
|
||||
static const struct button_mapping button_context_usb_hid_mode_mouse[] = {
|
||||
|
||||
LAST_ITEM_IN_LIST__NEXTLIST(CONTEXT_USB_HID)
|
||||
}; /* button_context_usb_hid_mode_mouse */
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/* get_context_mapping returns a pointer to one of the above defined arrays depending on the context */
|
||||
const struct button_mapping* get_context_mapping(int context)
|
||||
{
|
||||
switch (context)
|
||||
{
|
||||
case CONTEXT_STD:
|
||||
return button_context_standard;
|
||||
case CONTEXT_MAINMENU:
|
||||
return button_context_tree;
|
||||
case CONTEXT_SETTINGS:
|
||||
return button_context_settings;
|
||||
case CONTEXT_WPS:
|
||||
return button_context_wps;
|
||||
case CONTEXT_YESNOSCREEN:
|
||||
return button_context_yesno;
|
||||
case CONTEXT_SETTINGS_TIME:
|
||||
return button_context_time;
|
||||
case CONTEXT_KEYBOARD:
|
||||
case CONTEXT_MORSE_INPUT:
|
||||
return button_context_keyboard;
|
||||
#ifdef CONFIG_TUNER
|
||||
case CONTEXT_FM:
|
||||
return button_context_radio;
|
||||
#endif
|
||||
case CONTEXT_LIST:
|
||||
return button_context_list;
|
||||
case CONTEXT_TREE:
|
||||
return button_context_tree;
|
||||
case CONTEXT_SETTINGS_EQ:
|
||||
return button_context_eq;
|
||||
#ifdef HAVE_RECORDING
|
||||
case CONTEXT_RECSCREEN:
|
||||
return button_context_recscreen;
|
||||
#endif
|
||||
case CONTEXT_QUICKSCREEN:
|
||||
return button_context_quickscreen;
|
||||
case CONTEXT_BOOKMARKSCREEN:
|
||||
return button_context_bmark;
|
||||
case CONTEXT_PITCHSCREEN:
|
||||
return button_context_pitchscreen;
|
||||
case CONTEXT_SETTINGS_COLOURCHOOSER:
|
||||
return button_context_colorchooser;
|
||||
case CONTEXT_SETTINGS_RECTRIGGER:
|
||||
return button_context_settings;
|
||||
case CONTEXT_CUSTOM|CONTEXT_SETTINGS:
|
||||
return button_context_settings;
|
||||
#ifdef USB_ENABLE_HID
|
||||
case CONTEXT_USB_HID:
|
||||
return button_context_usb_hid;
|
||||
case CONTEXT_USB_HID_MODE_MULTIMEDIA:
|
||||
return button_context_usb_hid_mode_multimedia;
|
||||
case CONTEXT_USB_HID_MODE_PRESENTATION:
|
||||
return button_context_usb_hid_mode_presentation;
|
||||
case CONTEXT_USB_HID_MODE_BROWSER:
|
||||
return button_context_usb_hid_mode_browser;
|
||||
#ifdef HAVE_USB_HID_MOUSE
|
||||
case CONTEXT_USB_HID_MODE_MOUSE:
|
||||
return button_context_usb_hid_mode_mouse;
|
||||
#endif
|
||||
#endif
|
||||
default:
|
||||
return button_context_standard;
|
||||
}
|
||||
return button_context_standard;
|
||||
}
|
||||
|
|
@ -12465,15 +12465,15 @@
|
|||
user: core
|
||||
<source>
|
||||
*: none
|
||||
gigabeats,mpiohd200,mpiohd300,sansafuzeplus: "3-D Enhancement"
|
||||
gigabeats,mpiohd200,mpiohd300,sansafuzeplus,creativezenxfi2,creativezenxfi3: "3-D Enhancement"
|
||||
</source>
|
||||
<dest>
|
||||
*: none
|
||||
gigabeats,mpiohd200,mpiohd300,sansafuzeplus: "3-D Enhancement"
|
||||
gigabeats,mpiohd200,mpiohd300,sansafuzeplus,creativezenxfi2,creativezenxfi3: "3-D Enhancement"
|
||||
</dest>
|
||||
<voice>
|
||||
*: none
|
||||
gigabeats,mpiohd200,mpiohd300,sansafuzeplus: "3-D Enhancement"
|
||||
gigabeats,mpiohd200,mpiohd300,sansafuzeplus,creativezenxfi2,creativezenxfi3: "3-D Enhancement"
|
||||
</voice>
|
||||
</phrase>
|
||||
<phrase>
|
||||
|
|
|
|||
|
|
@ -240,10 +240,16 @@
|
|||
#define BATTERY_ON_TXT "SELECT - start"
|
||||
#define BATTERY_OFF_TXT "POWER"
|
||||
|
||||
#elif CONFIG_KEYPAD == CREATIVE_ZENXFI3_PAD
|
||||
#define BATTERY_ON BUTTON_PLAY
|
||||
#define BATTERY_OFF BUTTON_POWER
|
||||
#define BATTERY_ON_TXT "PLAY - start"
|
||||
|
||||
#elif (CONFIG_KEYPAD == HM60X_PAD) || (CONFIG_KEYPAD == HM801_PAD)
|
||||
#define BATTERY_ON BUTTON_SELECT
|
||||
#define BATTERY_OFF BUTTON_POWER
|
||||
#define BATTERY_ON_TXT "SELECT - start"
|
||||
|
||||
#define BATTERY_OFF_TXT "POWER"
|
||||
|
||||
#else
|
||||
|
|
|
|||
|
|
@ -118,6 +118,7 @@ const struct button_mapping pla_main_ctx[] =
|
|||
|| (CONFIG_KEYPAD == SANSA_FUZEPLUS_PAD) \
|
||||
|| (CONFIG_KEYPAD == SANSA_CONNECT_PAD) \
|
||||
|| (CONFIG_KEYPAD == SAMSUNG_YPR0_PAD) \
|
||||
|| (CONFIG_KEYPAD == CREATIVE_ZENXFI3_PAD) \
|
||||
|| (CONFIG_KEYPAD == HM60X_PAD) \
|
||||
|| (CONFIG_KEYPAD == HM801_PAD))
|
||||
{ PLA_UP, BUTTON_UP, BUTTON_NONE },
|
||||
|
|
@ -417,6 +418,12 @@ const struct button_mapping pla_main_ctx[] =
|
|||
{PLA_SELECT, BUTTON_SELECT, BUTTON_NONE},
|
||||
{PLA_SELECT_REL, BUTTON_SELECT|BUTTON_REL, BUTTON_SELECT},
|
||||
{PLA_SELECT_REPEAT, BUTTON_SELECT|BUTTON_REPEAT, BUTTON_NONE},
|
||||
#elif (CONFIG_KEYPAD == CREATIVE_ZENXFI3_PAD)
|
||||
{PLA_CANCEL, BUTTON_VOL_DOWN, BUTTON_NONE},
|
||||
{PLA_EXIT, BUTTON_POWER, BUTTON_NONE},
|
||||
{PLA_SELECT, BUTTON_VOL_UP, BUTTON_NONE},
|
||||
{PLA_SELECT_REL, BUTTON_VOL_UP|BUTTON_REL, BUTTON_VOL_UP},
|
||||
{PLA_SELECT_REPEAT, BUTTON_VOL_UP|BUTTON_REPEAT, BUTTON_NONE},
|
||||
#else
|
||||
# ifndef HAVE_TOUCHSCREEN
|
||||
# error pluginlib_actions: No actions defined
|
||||
|
|
|
|||
|
|
@ -332,6 +332,9 @@ drivers/tuner/ipod_remote_tuner.c
|
|||
#if (CONFIG_TUNER & RDA5802)
|
||||
drivers/tuner/rda5802.c
|
||||
#endif /* (CONFIG_TUNER & RDA5802) */
|
||||
#if (CONFIG_TUNER & STFM1000)
|
||||
drivers/tuner/stfm1000.c
|
||||
#endif /* (CONFIG_TUNER & STFM1000) */
|
||||
#if defined(HAVE_RDS_CAP)
|
||||
drivers/rds.c
|
||||
#endif /* HAVE_RDS_CAP */
|
||||
|
|
@ -504,8 +507,12 @@ target/arm/imx233/clkctrl-imx233.c
|
|||
target/arm/imx233/system-imx233.c
|
||||
target/arm/imx233/timrot-imx233.c
|
||||
target/arm/imx233/kernel-imx233.c
|
||||
# if (CONFIG_STORAGE & STORAGE_SD)
|
||||
target/arm/imx233/sd-imx233.c
|
||||
# endif
|
||||
# if (CONFIG_STORAGE & STORAGE_MMC)
|
||||
target/arm/imx233/mmc-imx233.c
|
||||
# endif
|
||||
target/arm/imx233/partitions-imx233.c
|
||||
target/arm/imx233/ssp-imx233.c
|
||||
target/arm/imx233/dma-imx233.c
|
||||
|
|
@ -1124,6 +1131,33 @@ target/arm/tms320dm320/creative-zvm/powermgmt-creativezvm.c
|
|||
target/arm/tms320dm320/creative-zvm/usb-creativezvm.c
|
||||
#endif /* CREATIVE_ZVx */
|
||||
|
||||
#ifdef CREATIVE_ZENXFI2
|
||||
target/arm/imx233/creative-zenxfi2/backlight-zenxfi2.c
|
||||
target/arm/imx233/creative-zenxfi2/lcd-zenxfi2.c
|
||||
target/arm/imx233/creative-zenxfi2/button-zenxfi2.c
|
||||
target/arm/imx233/creative-zenxfi2/debug-zenxfi2.c
|
||||
target/arm/imx233/creative-zenxfi2/power-zenxfi2.c
|
||||
target/arm/imx233/creative-zenxfi2/adc-zenxfi2.c
|
||||
target/arm/imx233/creative-zenxfi2/powermgmt-zenxfi2.c
|
||||
#ifndef BOOTLOADER
|
||||
target/arm/imx233/creative-zenxfi2/audio-zenxfi2.c
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifdef CREATIVE_ZENXFI3
|
||||
drivers/mpr121.c
|
||||
target/arm/imx233/creative-zenxfi3/backlight-zenxfi3.c
|
||||
target/arm/imx233/creative-zenxfi3/lcd-zenxfi3.c
|
||||
target/arm/imx233/creative-zenxfi3/button-zenxfi3.c
|
||||
target/arm/imx233/creative-zenxfi3/debug-zenxfi3.c
|
||||
target/arm/imx233/creative-zenxfi3/power-zenxfi3.c
|
||||
target/arm/imx233/creative-zenxfi3/adc-zenxfi3.c
|
||||
target/arm/imx233/creative-zenxfi3/powermgmt-zenxfi3.c
|
||||
#ifndef BOOTLOADER
|
||||
target/arm/imx233/creative-zenxfi3/audio-zenxfi3.c
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifdef SANSA_CONNECT
|
||||
drivers/lcd-memframe.c
|
||||
target/arm/tms320dm320/sdmmc-dm320.c
|
||||
|
|
|
|||
|
|
@ -145,6 +145,8 @@
|
|||
#define HM801_PAD 51
|
||||
#define SANSA_CONNECT_PAD 52
|
||||
#define SAMSUNG_YPR0_PAD 53
|
||||
#define CREATIVE_ZENXFI2_PAD 54
|
||||
#define CREATIVE_ZENXFI3_PAD 55
|
||||
|
||||
/* CONFIG_REMOTE_KEYPAD */
|
||||
#define H100_REMOTE 1
|
||||
|
|
@ -244,6 +246,8 @@
|
|||
#define LCD_CONNECT 45 /* as used by the Sandisk Sansa Connect */
|
||||
#define LCD_GIGABEATS 46
|
||||
#define LCD_YPR0 47
|
||||
#define LCD_CREATIVEZXFI2 48 /* as used by the Creative Zen X-Fi2 */
|
||||
#define LCD_CREATIVEZXFI3 49 /* as used by the Creative Zen X-Fi3 */
|
||||
|
||||
/* LCD_PIXELFORMAT */
|
||||
#define HORIZONTAL_PACKING 1
|
||||
|
|
@ -417,6 +421,10 @@ Lyre prototype 1 */
|
|||
#include "config/zenvisionm60gb.h"
|
||||
#elif defined(CREATIVE_ZV)
|
||||
#include "config/zenvision.h"
|
||||
#elif defined(CREATIVE_ZENXFI2)
|
||||
#include "config/creativezenxfi2.h"
|
||||
#elif defined(CREATIVE_ZENXFI3)
|
||||
#include "config/creativezenxfi3.h"
|
||||
#elif defined(PHILIPS_SA9200)
|
||||
#include "config/gogearsa9200.h"
|
||||
#elif defined(PHILIPS_HDD1630)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,202 @@
|
|||
/*
|
||||
* This config file is for the Creative Zen X-Fi2
|
||||
*/
|
||||
#define TARGET_TREE /* this target is using the target tree system */
|
||||
|
||||
/* For Rolo and boot loader */
|
||||
#define MODEL_NUMBER 82
|
||||
#define MODEL_NAME "Creative Zen X-Fi2"
|
||||
|
||||
#define HW_SAMPR_CAPS SAMPR_CAP_ALL
|
||||
|
||||
/* define this if you have recording possibility */
|
||||
#define HAVE_RECORDING
|
||||
|
||||
#define REC_SAMPR_CAPS SAMPR_CAP_ALL
|
||||
|
||||
/* Default recording levels */
|
||||
#define DEFAULT_REC_MIC_GAIN 23
|
||||
#define DEFAULT_REC_LEFT_GAIN 23
|
||||
#define DEFAULT_REC_RIGHT_GAIN 23
|
||||
|
||||
/* Define bitmask of input sources - recordable bitmask can be defined
|
||||
explicitly if different */
|
||||
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
|
||||
|
||||
/* define this if you have a bitmap LCD display */
|
||||
#define HAVE_LCD_BITMAP
|
||||
/* define this if you have a colour LCD */
|
||||
#define HAVE_LCD_COLOR
|
||||
|
||||
#ifndef BOOTLOADER
|
||||
#define HAVE_ALBUMART
|
||||
|
||||
/* define this to enable bitmap scaling */
|
||||
#define HAVE_BMP_SCALING
|
||||
|
||||
/* define this to enable JPEG decoding */
|
||||
#define HAVE_JPEG
|
||||
|
||||
/* Define this if a programmable hotkey is mapped */
|
||||
#define HAVE_HOTKEY
|
||||
|
||||
/* define this if you have access to the quickscreen */
|
||||
#define HAVE_QUICKSCREEN
|
||||
|
||||
/* define this if you have access to the pitchscreen */
|
||||
#define HAVE_PITCHSCREEN
|
||||
|
||||
/* define this if you would like tagcache to build on this target */
|
||||
#define HAVE_TAGCACHE
|
||||
|
||||
/* define this if the target has volume keys which can be used in the lists */
|
||||
#define HAVE_VOLUME_IN_LIST
|
||||
|
||||
/* define this if you have LCD enable function */
|
||||
#define HAVE_LCD_ENABLE
|
||||
|
||||
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
|
||||
should be defined as well.
|
||||
#define HAVE_LCD_SLEEP
|
||||
#define HAVE_LCD_SLEEP_SETTING
|
||||
*/
|
||||
|
||||
/* define this if you can flip your LCD
|
||||
#define HAVE_LCD_FLIP
|
||||
*/
|
||||
|
||||
/* define this if you can invert the colours on your LCD
|
||||
#define HAVE_LCD_INVERT
|
||||
*/
|
||||
|
||||
/* define this if you have a real-time clock */
|
||||
#define CONFIG_RTC RTC_IMX233
|
||||
|
||||
/* define this if you have a real-time clock with alarm facilities */
|
||||
#define HAVE_RTC_ALARM
|
||||
|
||||
#endif /* !BOOTLOADER */
|
||||
|
||||
/* define this if you have an i.MX23 codec */
|
||||
#define HAVE_IMX233_CODEC
|
||||
|
||||
#define CONFIG_TUNER STFM1000
|
||||
|
||||
/* There is no hardware tone control */
|
||||
#define HAVE_SW_TONE_CONTROLS
|
||||
|
||||
#define CONFIG_KEYPAD CREATIVE_ZENXFI2_PAD
|
||||
#define HAVE_TOUCHSCREEN
|
||||
#define HAVE_BUTTON_DATA
|
||||
|
||||
/* Define this to enable morse code input */
|
||||
#define HAVE_MORSE_INPUT
|
||||
|
||||
/* Define this if you do software codec */
|
||||
#define CONFIG_CODEC SWCODEC
|
||||
|
||||
/* LCD dimensions */
|
||||
#define LCD_WIDTH 240
|
||||
#define LCD_HEIGHT 400
|
||||
#define LCD_DEPTH 16 /* 65536 colours */
|
||||
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
|
||||
#define LCD_DPI 150
|
||||
|
||||
/* Define this if you have a software controlled poweroff */
|
||||
#define HAVE_SW_POWEROFF
|
||||
|
||||
/* Some Sansa Fuzes seem to be FAT16 formatted */
|
||||
#define HAVE_FAT16SUPPORT
|
||||
|
||||
/* The number of bytes reserved for loadable codecs */
|
||||
#define CODEC_SIZE 0x100000
|
||||
|
||||
/* The number of bytes reserved for loadable plugins */
|
||||
#define PLUGIN_BUFFER_SIZE 0x80000
|
||||
|
||||
#define AB_REPEAT_ENABLE
|
||||
|
||||
/* Define this for LCD backlight available */
|
||||
#define HAVE_BACKLIGHT
|
||||
#define HAVE_BACKLIGHT_BRIGHTNESS
|
||||
|
||||
/* Main LCD backlight brightness range and defaults */
|
||||
#define MIN_BRIGHTNESS_SETTING 0
|
||||
#define MAX_BRIGHTNESS_SETTING 100
|
||||
#define DEFAULT_BRIGHTNESS_SETTING 50
|
||||
|
||||
/* Which backlight fading type? */
|
||||
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
|
||||
|
||||
/* define this if you have a flash memory storage */
|
||||
#define HAVE_FLASH_STORAGE
|
||||
|
||||
/* define this if the flash memory uses the SecureDigital Memory Card protocol */
|
||||
#define CONFIG_STORAGE (/*STORAGE_NAND |*/ STORAGE_SD)
|
||||
#define NUM_DRIVES 1
|
||||
#define HAVE_MULTIDRIVE
|
||||
#define HAVE_MULTIVOLUME
|
||||
#define HAVE_HOTSWAP_STORAGE_AS_MAIN
|
||||
#define HAVE_HOTSWAP
|
||||
#define CONFIG_NAND NAND_IMX233
|
||||
|
||||
/* todo */
|
||||
#define BATTERY_CAPACITY_DEFAULT 550 /* default battery capacity */
|
||||
#define BATTERY_CAPACITY_MIN 550 /* min. capacity selectable */
|
||||
#define BATTERY_CAPACITY_MAX 550 /* max. capacity selectable */
|
||||
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
|
||||
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
||||
|
||||
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
|
||||
|
||||
/* Charging implemented in a target-specific algorithm */
|
||||
#define CONFIG_CHARGING CHARGING_TARGET
|
||||
|
||||
/* define this if the unit can be powered or charged via USB */
|
||||
#define HAVE_USB_POWER
|
||||
|
||||
/* Define this if you have an IMX233*/
|
||||
#define CONFIG_CPU IMX233
|
||||
|
||||
/* Define this if you want to use the IMX233 i2c interface */
|
||||
#define CONFIG_I2C I2C_IMX233
|
||||
|
||||
/* define current usage levels (based on battery bench) */
|
||||
#define CURRENT_NORMAL 35
|
||||
#define CURRENT_BACKLIGHT 30
|
||||
#define CURRENT_RECORD CURRENT_NORMAL
|
||||
|
||||
/* maximum charging current */
|
||||
#define CURRENT_MAX_CHG 200
|
||||
|
||||
/* Define this to the CPU frequency */
|
||||
#define CPU_FREQ 454000000
|
||||
|
||||
/* Type of LCD */
|
||||
#define CONFIG_LCD LCD_CREATIVEZXFI2
|
||||
|
||||
/* Offset ( in the firmware file's header ) to the file CRC and data. These are
|
||||
only used when loading the old format rockbox.e200 file */
|
||||
#define FIRMWARE_OFFSET_FILE_CRC 0x0
|
||||
#define FIRMWARE_OFFSET_FILE_DATA 0x8
|
||||
|
||||
/* USB On-the-go */
|
||||
#define CONFIG_USBOTG USBOTG_ARC
|
||||
|
||||
/* enable these for the experimental usb stack */
|
||||
#define HAVE_USBSTACK
|
||||
//#define USB_HANDLED_BY_OF
|
||||
#define USE_ROCKBOX_USB
|
||||
#define USB_VENDOR_ID 0x041e
|
||||
#define USB_PRODUCT_ID 0x2020
|
||||
#define HAVE_USB_HID_MOUSE
|
||||
#define HAVE_BOOTLOADER_USB_MODE
|
||||
|
||||
/* Define this if you have adjustable CPU frequency */
|
||||
#define HAVE_ADJUSTABLE_CPU_FREQ
|
||||
|
||||
#define BOOTFILE_EXT "creative"
|
||||
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
||||
#define BOOTDIR "/.rockbox"
|
||||
|
||||
#define INCLUDE_TIMEOUT_API
|
||||
|
|
@ -0,0 +1,208 @@
|
|||
/*
|
||||
* This config file is for the Creative Zen X-Fi3
|
||||
*/
|
||||
#define TARGET_TREE /* this target is using the target tree system */
|
||||
|
||||
/* For Rolo and boot loader */
|
||||
#define MODEL_NUMBER 83
|
||||
#define MODEL_NAME "Creative Zen X-Fi3"
|
||||
|
||||
#define HW_SAMPR_CAPS SAMPR_CAP_ALL
|
||||
|
||||
/* define this if you have recording possibility */
|
||||
#define HAVE_RECORDING
|
||||
|
||||
#define REC_SAMPR_CAPS SAMPR_CAP_ALL
|
||||
|
||||
/* Default recording levels */
|
||||
#define DEFAULT_REC_MIC_GAIN 23
|
||||
#define DEFAULT_REC_LEFT_GAIN 23
|
||||
#define DEFAULT_REC_RIGHT_GAIN 23
|
||||
|
||||
/* Define bitmask of input sources - recordable bitmask can be defined
|
||||
explicitly if different */
|
||||
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
|
||||
|
||||
/* define this if you have a bitmap LCD display */
|
||||
#define HAVE_LCD_BITMAP
|
||||
/* define this if you have a colour LCD */
|
||||
#define HAVE_LCD_COLOR
|
||||
|
||||
#ifndef BOOTLOADER
|
||||
#define HAVE_ALBUMART
|
||||
|
||||
/* define this to enable bitmap scaling */
|
||||
#define HAVE_BMP_SCALING
|
||||
|
||||
/* define this to enable JPEG decoding */
|
||||
#define HAVE_JPEG
|
||||
|
||||
/* Define this if a programmable hotkey is mapped */
|
||||
#define HAVE_HOTKEY
|
||||
|
||||
/* define this if you have access to the quickscreen */
|
||||
#define HAVE_QUICKSCREEN
|
||||
|
||||
/* define this if you have a light associated with the buttons */
|
||||
#define HAVE_BUTTON_LIGHT
|
||||
#define HAVE_BUTTONLIGHT_BRIGHTNESS
|
||||
|
||||
/* define this if you have access to the pitchscreen */
|
||||
#define HAVE_PITCHSCREEN
|
||||
|
||||
/* define this if you would like tagcache to build on this target */
|
||||
#define HAVE_TAGCACHE
|
||||
|
||||
/* define this if the target has volume keys which can be used in the lists */
|
||||
#define HAVE_VOLUME_IN_LIST
|
||||
|
||||
/* define this if you have LCD enable function */
|
||||
#define HAVE_LCD_ENABLE
|
||||
|
||||
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
|
||||
should be defined as well.
|
||||
#define HAVE_LCD_SLEEP
|
||||
#define HAVE_LCD_SLEEP_SETTING
|
||||
*/
|
||||
|
||||
/* define this if you can flip your LCD
|
||||
#define HAVE_LCD_FLIP
|
||||
*/
|
||||
|
||||
/* define this if you can invert the colours on your LCD
|
||||
#define HAVE_LCD_INVERT
|
||||
*/
|
||||
|
||||
/* define this if you have a real-time clock */
|
||||
#define CONFIG_RTC RTC_IMX233
|
||||
|
||||
/* define this if you have a real-time clock with alarm facilities */
|
||||
#define HAVE_RTC_ALARM
|
||||
|
||||
#endif /* !BOOTLOADER */
|
||||
|
||||
/* define this if you have an i.MX23 codec */
|
||||
#define HAVE_IMX233_CODEC
|
||||
|
||||
#define CONFIG_TUNER STFM1000
|
||||
|
||||
/* There is no hardware tone control */
|
||||
#define HAVE_SW_TONE_CONTROLS
|
||||
|
||||
#define CONFIG_KEYPAD CREATIVE_ZENXFI3_PAD
|
||||
|
||||
/* Define this to enable morse code input */
|
||||
#define HAVE_MORSE_INPUT
|
||||
|
||||
/* Define this if you do software codec */
|
||||
#define CONFIG_CODEC SWCODEC
|
||||
|
||||
/* LCD dimensions */
|
||||
#define LCD_WIDTH 176
|
||||
#define LCD_HEIGHT 220
|
||||
#define LCD_DEPTH 16 /* 65536 colours */
|
||||
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
|
||||
|
||||
/* Define this if you have a software controlled poweroff */
|
||||
#define HAVE_SW_POWEROFF
|
||||
|
||||
/* Some Sansa Fuzes seem to be FAT16 formatted */
|
||||
#define HAVE_FAT16SUPPORT
|
||||
|
||||
/* The number of bytes reserved for loadable codecs */
|
||||
#define CODEC_SIZE 0x100000
|
||||
|
||||
/* The number of bytes reserved for loadable plugins */
|
||||
#define PLUGIN_BUFFER_SIZE 0x80000
|
||||
|
||||
#define AB_REPEAT_ENABLE
|
||||
|
||||
/* Define this for LCD backlight available */
|
||||
#define HAVE_BACKLIGHT
|
||||
#define HAVE_BACKLIGHT_BRIGHTNESS
|
||||
|
||||
/* Main LCD backlight brightness range and defaults */
|
||||
#define MIN_BRIGHTNESS_SETTING 0
|
||||
#define MAX_BRIGHTNESS_SETTING 100
|
||||
#define DEFAULT_BRIGHTNESS_SETTING 50
|
||||
|
||||
/* Which backlight fading type? */
|
||||
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
|
||||
|
||||
/* define this if you have a flash memory storage */
|
||||
#define HAVE_FLASH_STORAGE
|
||||
|
||||
/* define this if the flash memory uses the SecureDigital Memory Card protocol */
|
||||
#define CONFIG_STORAGE STORAGE_SD
|
||||
#define NUM_DRIVES 2
|
||||
#define HAVE_MULTIDRIVE
|
||||
#define HAVE_MULTIVOLUME
|
||||
#define HAVE_HOTSWAP
|
||||
|
||||
/* Extra threads: touchpad */
|
||||
#define TARGET_EXTRA_THREADS 1
|
||||
|
||||
/* todo */
|
||||
#define BATTERY_CAPACITY_DEFAULT 550 /* default battery capacity */
|
||||
#define BATTERY_CAPACITY_MIN 550 /* min. capacity selectable */
|
||||
#define BATTERY_CAPACITY_MAX 550 /* max. capacity selectable */
|
||||
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
|
||||
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
||||
|
||||
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
|
||||
|
||||
/* Charging implemented in a target-specific algorithm */
|
||||
#define CONFIG_CHARGING CHARGING_TARGET
|
||||
|
||||
/* define this if the unit can be powered or charged via USB */
|
||||
#define HAVE_USB_POWER
|
||||
|
||||
/* Define this if you have an IMX233*/
|
||||
#define CONFIG_CPU IMX233
|
||||
|
||||
/* Define this if you want to use the IMX233 i2c interface */
|
||||
#define CONFIG_I2C I2C_IMX233
|
||||
|
||||
/* define current usage levels (based on battery bench) */
|
||||
#define CURRENT_NORMAL 35
|
||||
#define CURRENT_BACKLIGHT 30
|
||||
#define CURRENT_RECORD CURRENT_NORMAL
|
||||
|
||||
/* maximum charging current */
|
||||
#define CURRENT_MAX_CHG 200
|
||||
|
||||
/* Define this to the CPU frequency */
|
||||
#define CPU_FREQ 454000000
|
||||
|
||||
/* Type of LCD */
|
||||
#define CONFIG_LCD LCD_CREATIVEZXFI3
|
||||
|
||||
/* Offset ( in the firmware file's header ) to the file CRC and data. These are
|
||||
only used when loading the old format rockbox.e200 file */
|
||||
#define FIRMWARE_OFFSET_FILE_CRC 0x0
|
||||
#define FIRMWARE_OFFSET_FILE_DATA 0x8
|
||||
|
||||
/* USB On-the-go */
|
||||
#define CONFIG_USBOTG USBOTG_ARC
|
||||
|
||||
/* enable these for the experimental usb stack */
|
||||
#define HAVE_USBSTACK
|
||||
//#define USB_HANDLED_BY_OF
|
||||
#define USE_ROCKBOX_USB
|
||||
#define USB_VENDOR_ID 0x041e
|
||||
#define USB_PRODUCT_ID 0x2020
|
||||
#define HAVE_USB_HID_MOUSE
|
||||
#define HAVE_BOOTLOADER_USB_MODE
|
||||
|
||||
/* The fuze+ actually interesting partition table does not use 512-byte sector
|
||||
* (usually 2048 logical sector size) */
|
||||
#define MAX_LOG_SECTOR_SIZE 2048
|
||||
|
||||
/* Define this if you have adjustable CPU frequency */
|
||||
#define HAVE_ADJUSTABLE_CPU_FREQ
|
||||
|
||||
#define BOOTFILE_EXT "creative"
|
||||
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
||||
#define BOOTDIR "/.rockbox"
|
||||
|
||||
#define INCLUDE_TIMEOUT_API
|
||||
|
|
@ -0,0 +1,32 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2011 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#ifndef _ADC_TARGET_H_
|
||||
#define _ADC_TARGET_H_
|
||||
|
||||
#define NUM_ADC_CHANNELS 5
|
||||
|
||||
#define ADC_BATTERY 0
|
||||
#define ADC_DIE_TEMP 1
|
||||
#define ADC_VDDIO 2
|
||||
#define ADC_5V 3
|
||||
#define ADC_BATT_TEMP 4
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,40 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2011 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#include "adc-target.h"
|
||||
#include "adc-imx233.h"
|
||||
|
||||
int imx233_adc_mapping[] =
|
||||
{
|
||||
[ADC_BATTERY] = IMX233_ADC_BATTERY,
|
||||
[ADC_DIE_TEMP] = IMX233_ADC_DIE_TEMP,
|
||||
[ADC_VDDIO] = IMX233_ADC_VDDIO,
|
||||
[ADC_5V] = HW_LRADC_CHANNEL_5V,
|
||||
[ADC_BATT_TEMP] = IMX233_ADC_BATT_TEMP,
|
||||
};
|
||||
|
||||
const char *imx233_adc_channel_name[] =
|
||||
{
|
||||
"Battery(raw)",
|
||||
"Die temperature(°C)",
|
||||
"VddIO",
|
||||
"Vdd5V",
|
||||
"Battery temperature(raw)",
|
||||
};
|
||||
|
|
@ -0,0 +1,55 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2012 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#include "config.h"
|
||||
#include "system.h"
|
||||
#include "audiohw.h"
|
||||
#include "audio.h"
|
||||
#include "audioout-imx233.h"
|
||||
#include "audioin-imx233.h"
|
||||
|
||||
static int input_source = AUDIO_SRC_PLAYBACK;
|
||||
static unsigned input_flags = 0;
|
||||
static int output_source = AUDIO_SRC_PLAYBACK;
|
||||
|
||||
static void select_audio_path(void)
|
||||
{
|
||||
if(input_source == AUDIO_SRC_PLAYBACK)
|
||||
imx233_audioout_select_hp_input(false);
|
||||
else
|
||||
imx233_audioout_select_hp_input(true);
|
||||
}
|
||||
|
||||
void audio_input_mux(int source, unsigned flags)
|
||||
{
|
||||
(void) source;
|
||||
(void) flags;
|
||||
input_source = source;
|
||||
input_flags = flags;
|
||||
select_audio_path();
|
||||
}
|
||||
|
||||
void audio_set_output_source(int source)
|
||||
{
|
||||
(void) source;
|
||||
output_source = source;
|
||||
select_audio_path();
|
||||
}
|
||||
|
||||
|
|
@ -0,0 +1,29 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2011 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#ifndef BACKLIGHT_TARGET_H
|
||||
#define BACKLIGHT_TARGET_H
|
||||
|
||||
bool _backlight_init(void);
|
||||
void _backlight_on(void);
|
||||
void _backlight_off(void);
|
||||
void _backlight_set_brightness(int brightness);
|
||||
|
||||
#endif /* BACKLIGHT_TARGET_H */
|
||||
|
|
@ -0,0 +1,58 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2011 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#include "config.h"
|
||||
#include "system.h"
|
||||
#include "lcd.h"
|
||||
#include "backlight.h"
|
||||
#include "backlight-target.h"
|
||||
#include "pwm-imx233.h"
|
||||
|
||||
void _backlight_set_brightness(int brightness)
|
||||
{
|
||||
imx233_pwm_setup_channel(4, 1024, HW_PWM_PERIODx__CDIV__DIV_1,
|
||||
0, HW_PWM_PERIODx__STATE__HIGH,
|
||||
(brightness * 1024) / 100, HW_PWM_PERIODx__STATE__LOW);
|
||||
imx233_pwm_enable_channel(4, true);
|
||||
}
|
||||
|
||||
bool _backlight_init(void)
|
||||
{
|
||||
_backlight_set_brightness(DEFAULT_BRIGHTNESS_SETTING);
|
||||
return true;
|
||||
}
|
||||
|
||||
void _backlight_on(void)
|
||||
{
|
||||
#ifdef HAVE_LCD_ENABLE
|
||||
lcd_enable(true); /* power on lcd + visible display */
|
||||
#endif
|
||||
/* don't do anything special, the core will set the brightness */
|
||||
}
|
||||
|
||||
void _backlight_off(void)
|
||||
{
|
||||
/* there is no real on/off but we can set to 0 brightness */
|
||||
_backlight_set_brightness(0);
|
||||
#ifdef HAVE_LCD_ENABLE
|
||||
lcd_enable(false); /* power off visible display */
|
||||
#endif
|
||||
}
|
||||
|
|
@ -0,0 +1,59 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2011 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#ifndef _BUTTON_TARGET_H_
|
||||
#define _BUTTON_TARGET_H_
|
||||
|
||||
#include <stdbool.h>
|
||||
#include "config.h"
|
||||
|
||||
void button_init_device(void);
|
||||
int button_read_device(int *data);
|
||||
bool button_debug_screen(void);
|
||||
|
||||
/* Main unit's buttons */
|
||||
#define BUTTON_POWER 0x00000001
|
||||
#define BUTTON_MENU 0x00000002
|
||||
/* For compatibility */
|
||||
#define BUTTON_LEFT BUTTON_MIDLEFT
|
||||
#define BUTTON_RIGHT BUTTON_MIDRIGHT
|
||||
#define BUTTON_UP BUTTON_TOPMIDDLE
|
||||
#define BUTTON_DOWN BUTTON_BOTTOMMIDDLE
|
||||
|
||||
/* Touch Screen Area Buttons */
|
||||
#define BUTTON_TOPLEFT 0x00000010
|
||||
#define BUTTON_TOPMIDDLE 0x00000020
|
||||
#define BUTTON_TOPRIGHT 0x00000040
|
||||
#define BUTTON_MIDLEFT 0x00000080
|
||||
#define BUTTON_CENTER 0x00000100
|
||||
#define BUTTON_MIDRIGHT 0x00000200
|
||||
#define BUTTON_BOTTOMLEFT 0x00000400
|
||||
#define BUTTON_BOTTOMMIDDLE 0x00000800
|
||||
#define BUTTON_BOTTOMRIGHT 0x00001000
|
||||
|
||||
#define BUTTON_MAIN 0x1fff
|
||||
|
||||
#define BUTTON_REMOTE 0
|
||||
|
||||
/* Software power-off */
|
||||
#define POWEROFF_BUTTON BUTTON_POWER
|
||||
#define POWEROFF_COUNT 10
|
||||
|
||||
#endif /* _BUTTON_TARGET_H_ */
|
||||
|
|
@ -0,0 +1,119 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2011 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#include "button-target.h"
|
||||
#include "system.h"
|
||||
#include "system-target.h"
|
||||
#include "pinctrl-imx233.h"
|
||||
#include "power-imx233.h"
|
||||
#include "string.h"
|
||||
#include "usb.h"
|
||||
#include "touchscreen.h"
|
||||
#include "touchscreen-imx233.h"
|
||||
|
||||
struct touch_calibration_point
|
||||
{
|
||||
short px_x; /* known pixel value */
|
||||
short px_y;
|
||||
short val_x; /* touchscreen value at the known pixel */
|
||||
short val_y;
|
||||
};
|
||||
|
||||
static struct touch_calibration_point topleft, bottomright;
|
||||
|
||||
/* Amaury Pouly: values on my device
|
||||
* Portait: (x and y are swapped)
|
||||
* (0,0) = 200, 300
|
||||
* (240,400) = 3900, 3800
|
||||
* Landscape:
|
||||
* (0,0) = 200, 3800
|
||||
* (400,240) = 3900, 300
|
||||
*/
|
||||
void button_init_device(void)
|
||||
{
|
||||
#if CONFIG_ORIENTATION == SCREEN_PORTRAIT
|
||||
topleft.val_x = 300;
|
||||
topleft.val_y = 200;
|
||||
|
||||
bottomright.val_x = 3800;
|
||||
bottomright.val_y = 3900;
|
||||
#else
|
||||
topleft.val_x = 300;
|
||||
topleft.val_y = 3900;
|
||||
|
||||
bottomright.val_x = 3800;
|
||||
bottomright.val_y = 200;
|
||||
#endif
|
||||
topleft.px_x = 0;
|
||||
topleft.px_y = 0;
|
||||
|
||||
bottomright.px_x = LCD_WIDTH;
|
||||
bottomright.px_y = LCD_HEIGHT;
|
||||
|
||||
imx233_touchscreen_init();
|
||||
imx233_touchscreen_enable(true);
|
||||
}
|
||||
|
||||
static int touch_to_pixels(int *val_x, int *val_y)
|
||||
{
|
||||
short x,y;
|
||||
|
||||
#if CONFIG_ORIENTATION == SCREEN_PORTRAIT
|
||||
x = *val_y;
|
||||
y = *val_x;
|
||||
#else
|
||||
x = *val_x;
|
||||
y = *val_y;
|
||||
#endif
|
||||
|
||||
x = (x - topleft.val_x) * (bottomright.px_x - topleft.px_x) / (bottomright.val_x - topleft.val_x) + topleft.px_x;
|
||||
y = (y - topleft.val_y) * (bottomright.px_y - topleft.px_y) / (bottomright.val_y - topleft.val_y) + topleft.px_y;
|
||||
|
||||
x = MAX(0, MIN(x, LCD_WIDTH - 1));
|
||||
y = MAX(0, MIN(y, LCD_HEIGHT - 1));
|
||||
|
||||
*val_x = x;
|
||||
*val_y = y;
|
||||
|
||||
return (x<<16)|y;
|
||||
}
|
||||
|
||||
static int touchscreen_read_device(int *data)
|
||||
{
|
||||
int x, y;
|
||||
if(!imx233_touchscreen_get_touch(&x, &y))
|
||||
return 0;
|
||||
if(data)
|
||||
*data = touch_to_pixels(&x, &y);
|
||||
return touchscreen_to_pixels(x, y, data);
|
||||
}
|
||||
|
||||
int button_read_device(int *data)
|
||||
{
|
||||
int res = 0;
|
||||
/* B0P11: #power
|
||||
* B0P14: #select */
|
||||
uint32_t mask = imx233_get_gpio_input_mask(0, 0x4800);
|
||||
if(!(mask & 0x800))
|
||||
res |= BUTTON_POWER;
|
||||
if(!(mask & 0x4000))
|
||||
res |= BUTTON_MENU;
|
||||
return res | touchscreen_read_device(data);
|
||||
}
|
||||
|
|
@ -0,0 +1,28 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2011 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#include "system.h"
|
||||
#include "button-target.h"
|
||||
|
||||
bool dbg_hw_target_info(void)
|
||||
{
|
||||
return false;
|
||||
}
|
||||
|
|
@ -0,0 +1,24 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (c) 2011 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#ifndef LCD_TARGET_H
|
||||
#define LCD_TARGET_H
|
||||
|
||||
#endif /* LCD_TARGET_H */
|
||||
|
|
@ -0,0 +1,512 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (c) 2011 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#include <sys/types.h> /* off_t */
|
||||
#include <string.h>
|
||||
#include "cpu.h"
|
||||
#include "system.h"
|
||||
#include "backlight-target.h"
|
||||
#include "lcd.h"
|
||||
#include "lcdif-imx233.h"
|
||||
#include "clkctrl-imx233.h"
|
||||
#include "pinctrl-imx233.h"
|
||||
#include "logf.h"
|
||||
|
||||
#ifdef HAVE_LCD_ENABLE
|
||||
static bool lcd_on;
|
||||
#endif
|
||||
static unsigned lcd_yuv_options = 0;
|
||||
|
||||
static void setup_parameters(void)
|
||||
{
|
||||
imx233_lcdif_reset();
|
||||
imx233_lcdif_set_lcd_databus_width(HW_LCDIF_CTRL__LCD_DATABUS_WIDTH_18_BIT);
|
||||
imx233_lcdif_set_word_length(HW_LCDIF_CTRL__WORD_LENGTH_18_BIT);
|
||||
imx233_lcdif_set_timings(2, 2, 3, 3);
|
||||
}
|
||||
|
||||
static void setup_lcd_pins(bool use_lcdif)
|
||||
{
|
||||
if(use_lcdif)
|
||||
{
|
||||
imx233_set_pin_function(1, 25, PINCTRL_FUNCTION_MAIN); /* lcd_vsync */
|
||||
imx233_set_pin_function(1, 21, PINCTRL_FUNCTION_MAIN); /* lcd_cs */
|
||||
imx233_set_pin_function(1, 22, PINCTRL_FUNCTION_MAIN); /* lcd_dotclk */
|
||||
imx233_set_pin_function(1, 23, PINCTRL_FUNCTION_MAIN); /* lcd_enable */
|
||||
imx233_set_pin_function(1, 24, PINCTRL_FUNCTION_MAIN); /* lcd_hsync */
|
||||
imx233_set_pin_function(1, 18, PINCTRL_FUNCTION_MAIN); /* lcd_reset */
|
||||
imx233_set_pin_function(1, 19, PINCTRL_FUNCTION_MAIN); /* lcd_rs */
|
||||
imx233_set_pin_function(1, 16, PINCTRL_FUNCTION_MAIN); /* lcd_d16 */
|
||||
imx233_set_pin_function(1, 17, PINCTRL_FUNCTION_MAIN); /* lcd_d17 */
|
||||
imx233_set_pin_function(1, 20, PINCTRL_FUNCTION_MAIN); /* lcd_wr */
|
||||
__REG_CLR(HW_PINCTRL_MUXSEL(2)) = 0xffffffff; /* lcd_d{0-15} */
|
||||
}
|
||||
else
|
||||
{
|
||||
__REG_SET(HW_PINCTRL_MUXSEL(2)) = 0xffffffff; /* lcd_d{0-15} */
|
||||
imx233_enable_gpio_output_mask(1, 0x3ffffff, false); /* lcd_{d{0-17},reset,rs,wr,cs,dotclk,enable,hsync,vsync} */
|
||||
imx233_set_pin_function(1, 16, PINCTRL_FUNCTION_GPIO); /* lcd_d16 */
|
||||
imx233_set_pin_function(1, 17, PINCTRL_FUNCTION_GPIO); /* lcd_d17 */
|
||||
imx233_set_pin_function(1, 19, PINCTRL_FUNCTION_GPIO); /* lcd_rs */
|
||||
imx233_set_pin_function(1, 20, PINCTRL_FUNCTION_GPIO); /* lcd_wr */
|
||||
imx233_set_pin_function(1, 21, PINCTRL_FUNCTION_GPIO); /* lcd_cs */
|
||||
imx233_set_pin_function(1, 22, PINCTRL_FUNCTION_GPIO); /* lcd_dotclk */
|
||||
imx233_set_pin_function(1, 23, PINCTRL_FUNCTION_GPIO); /* lcd_enable */
|
||||
imx233_set_pin_function(1, 24, PINCTRL_FUNCTION_GPIO); /* lcd_hsync */
|
||||
imx233_set_pin_function(1, 25, PINCTRL_FUNCTION_GPIO); /* lcd_vsync */
|
||||
}
|
||||
}
|
||||
|
||||
static void common_lcd_enable(bool enable)
|
||||
{
|
||||
imx233_lcdif_enable(enable);
|
||||
setup_lcd_pins(enable); /* use GPIO pins when disable */
|
||||
}
|
||||
|
||||
static void setup_lcdif(void)
|
||||
{
|
||||
setup_parameters();
|
||||
common_lcd_enable(true);
|
||||
imx233_lcdif_enable_bus_master(true);
|
||||
}
|
||||
|
||||
static inline uint32_t encode_16_to_18(uint32_t a)
|
||||
{
|
||||
return ((a & 0xff) << 1) | (((a >> 8) & 0xff) << 10);
|
||||
}
|
||||
|
||||
static inline uint32_t decode_18_to_16(uint32_t a)
|
||||
{
|
||||
return ((a >> 1) & 0xff) | ((a >> 2) & 0xff00);
|
||||
}
|
||||
|
||||
static void setup_lcdif_clock(void)
|
||||
{
|
||||
/* the LCD seems to work at 24Mhz, so use the xtal clock with no divider */
|
||||
imx233_clkctrl_enable_clock(CLK_PIX, false);
|
||||
imx233_clkctrl_set_clock_divisor(CLK_PIX, 1);
|
||||
imx233_clkctrl_set_bypass_pll(CLK_PIX, true); /* use XTAL */
|
||||
imx233_clkctrl_enable_clock(CLK_PIX, true);
|
||||
}
|
||||
|
||||
static void lcd_write_reg(uint32_t reg, uint32_t data)
|
||||
{
|
||||
uint32_t old_reg = reg;
|
||||
/* get back to 18-bit word length */
|
||||
imx233_lcdif_set_word_length(HW_LCDIF_CTRL__WORD_LENGTH_18_BIT);
|
||||
reg = encode_16_to_18(reg);
|
||||
data = encode_16_to_18(data);
|
||||
|
||||
imx233_lcdif_pio_send(false, 2, ®);
|
||||
if(old_reg != 0 && old_reg != 0x202)
|
||||
imx233_lcdif_pio_send(true, 2, &data);
|
||||
}
|
||||
|
||||
#define REG_MDELAY 0xffffffff
|
||||
struct lcd_sequence_entry_t
|
||||
{
|
||||
uint32_t reg, data;
|
||||
};
|
||||
|
||||
static void lcd_send_sequence(struct lcd_sequence_entry_t *seq, unsigned count)
|
||||
{
|
||||
for(;count-- > 0; seq++)
|
||||
{
|
||||
if(seq->reg == REG_MDELAY)
|
||||
mdelay(seq->data);
|
||||
else
|
||||
lcd_write_reg(seq->reg, seq->data);
|
||||
}
|
||||
}
|
||||
|
||||
#define _begin_seq() static struct lcd_sequence_entry_t __seq[] = {
|
||||
#define _mdelay(a) {REG_MDELAY, a},
|
||||
#define _lcd_write_reg(a, b) {a, b},
|
||||
#define _end_seq() }; lcd_send_sequence(__seq, sizeof(__seq) / sizeof(__seq[0]));
|
||||
|
||||
static void lcd_init_seq(void)
|
||||
{
|
||||
_begin_seq()
|
||||
_lcd_write_reg(0, 0)
|
||||
_lcd_write_reg(0, 0)
|
||||
_lcd_write_reg(0, 0)
|
||||
_lcd_write_reg(0, 0)
|
||||
_mdelay(100)
|
||||
_lcd_write_reg(8, 0x808)
|
||||
_lcd_write_reg(0x10, 0x10)
|
||||
_lcd_write_reg(0x400, 0x6200)
|
||||
_lcd_write_reg(0x300, 0xc0a)
|
||||
_lcd_write_reg(0x301, 0x4c11)
|
||||
_lcd_write_reg(0x302, 0x906)
|
||||
_lcd_write_reg(0x303, 0x1417)
|
||||
_lcd_write_reg(0x304, 0x3333)
|
||||
_lcd_write_reg(0x305, 0x150d)
|
||||
_lcd_write_reg(0x306, 0x740a)
|
||||
_lcd_write_reg(0x307, 0x100c)
|
||||
_lcd_write_reg(0x308, 0x60c)
|
||||
_lcd_write_reg(0x309, 0)
|
||||
_lcd_write_reg(0x100, 0x730)
|
||||
_lcd_write_reg(0x101, 0x237)
|
||||
_lcd_write_reg(0x103, 0x2b00)
|
||||
_lcd_write_reg(0x280, 0x4000)
|
||||
_lcd_write_reg(0x102, 0x81b0)
|
||||
_mdelay(400)
|
||||
_lcd_write_reg(1, 0x100)
|
||||
_lcd_write_reg(2, 0x100)
|
||||
_lcd_write_reg(3, 0x5028)
|
||||
_lcd_write_reg(9, 1)
|
||||
_lcd_write_reg(0xc, 0)
|
||||
_lcd_write_reg(0x11, 0x202)
|
||||
_lcd_write_reg(0x12, 0x101)
|
||||
_lcd_write_reg(0x13, 1)
|
||||
_lcd_write_reg(0x90, 0x8000)
|
||||
_lcd_write_reg(0x210, 0)
|
||||
_lcd_write_reg(0x211, 0xef)
|
||||
_lcd_write_reg(0x212, 0)
|
||||
_lcd_write_reg(0x213, 0x18f)
|
||||
_lcd_write_reg(0x200, 0)
|
||||
_lcd_write_reg(0x201, 0)
|
||||
_lcd_write_reg(0x401, 1)
|
||||
_lcd_write_reg(0x404, 0)
|
||||
_mdelay(400)
|
||||
_lcd_write_reg(7, 0x100)
|
||||
_mdelay(400)
|
||||
_lcd_write_reg(3, 0x1030)
|
||||
_end_seq()
|
||||
}
|
||||
|
||||
void lcd_init_device(void)
|
||||
{
|
||||
setup_lcdif();
|
||||
setup_lcdif_clock();
|
||||
|
||||
// reset device
|
||||
__REG_SET(HW_LCDIF_CTRL1) = HW_LCDIF_CTRL1__RESET;
|
||||
mdelay(50);
|
||||
__REG_CLR(HW_LCDIF_CTRL1) = HW_LCDIF_CTRL1__RESET;
|
||||
mdelay(10);
|
||||
__REG_SET(HW_LCDIF_CTRL1) = HW_LCDIF_CTRL1__RESET;
|
||||
|
||||
lcd_init_seq();
|
||||
#ifdef HAVE_LCD_ENABLE
|
||||
lcd_on = true;
|
||||
#endif
|
||||
}
|
||||
|
||||
#ifdef HAVE_LCD_ENABLE
|
||||
bool lcd_active(void)
|
||||
{
|
||||
return lcd_on;
|
||||
}
|
||||
|
||||
static void lcd_enable_seq(bool enable)
|
||||
{
|
||||
if(!enable)
|
||||
{
|
||||
_begin_seq()
|
||||
_end_seq()
|
||||
}
|
||||
else
|
||||
{
|
||||
_begin_seq()
|
||||
_end_seq()
|
||||
}
|
||||
}
|
||||
|
||||
void lcd_enable(bool enable)
|
||||
{
|
||||
if(lcd_on == enable)
|
||||
return;
|
||||
|
||||
lcd_on = enable;
|
||||
|
||||
if(enable)
|
||||
common_lcd_enable(true);
|
||||
lcd_enable_seq(enable);
|
||||
if(!enable)
|
||||
common_lcd_enable(false);
|
||||
}
|
||||
#endif
|
||||
|
||||
void lcd_update(void)
|
||||
{
|
||||
lcd_update_rect(0, 0, LCD_WIDTH, LCD_HEIGHT);
|
||||
}
|
||||
|
||||
void lcd_update_rect(int x, int y, int w, int h)
|
||||
{
|
||||
#ifdef HAVE_LCD_ENABLE
|
||||
if(!lcd_on)
|
||||
return;
|
||||
#endif
|
||||
/* make sure the rectangle is included in the screen */
|
||||
x = MIN(x, LCD_WIDTH);
|
||||
y = MIN(y, LCD_HEIGHT);
|
||||
w = MIN(w, LCD_WIDTH - x);
|
||||
h = MIN(h, LCD_HEIGHT - y);
|
||||
|
||||
imx233_lcdif_wait_ready();
|
||||
lcd_write_reg(0x210, x);
|
||||
lcd_write_reg(0x211, x + w - 1);
|
||||
lcd_write_reg(0x212, y);
|
||||
lcd_write_reg(0x213, y + h - 1);
|
||||
lcd_write_reg(0x200, 0);
|
||||
lcd_write_reg(0x201, 0);
|
||||
lcd_write_reg(0x202, 0);
|
||||
imx233_lcdif_wait_ready();
|
||||
imx233_lcdif_set_word_length(HW_LCDIF_CTRL__WORD_LENGTH_16_BIT);
|
||||
imx233_lcdif_set_byte_packing_format(0xf); /* two pixels per 32-bit word */
|
||||
imx233_lcdif_set_data_format(false, false, false); /* RGB565, don't care, don't care */
|
||||
|
||||
/* there are two cases here:
|
||||
* - either width = LCD_WIDTH and we can directly memcopy a part of lcd_framebuffer to FRAME
|
||||
* and send it
|
||||
* - either width != LCD_WIDTH and we have to build a contiguous copy of the rectangular area
|
||||
* into FRAME before sending it (which is slower and doesn't use the hardware)
|
||||
* In all cases, FRAME just acts as a temporary buffer.
|
||||
* NOTE It's more interesting to do a copy to FRAME in all cases since in system mode
|
||||
* the clock runs at 24MHz which provides barely 10MB/s bandwidth compared to >100MB/s
|
||||
* for memcopy operations
|
||||
*/
|
||||
if(w == LCD_WIDTH)
|
||||
{
|
||||
memcpy((void *)FRAME, FBADDR(x,y), w * h * sizeof(fb_data));
|
||||
}
|
||||
else
|
||||
{
|
||||
for(int i = 0; i < h; i++)
|
||||
memcpy((fb_data *)FRAME + i * w, FBADDR(x,y + i), w * sizeof(fb_data));
|
||||
}
|
||||
/* WARNING The LCDIF has a limitation on the vertical count ! In 16-bit packed mode
|
||||
* (which we used, ie 16-bit per pixel, 2 pixels per 32-bit words), the v_count
|
||||
* field must be a multiple of 2. Furthermore, it seems the lcd controller doesn't
|
||||
* really like when both w and h are even, probably because the writes to the GRAM
|
||||
* are done on several words and the controller requires dummy writes.
|
||||
* The workaround is to always make sure that we send a number of pixels which is
|
||||
* a multiple of 4 so that both the lcdif and the controller are happy. If any
|
||||
* of w or h is odd, we will send a copy of the first pixels as dummy writes. We will
|
||||
* send at most 3 bytes. We then send (w * h + 3) / 4 x 4 bytes.
|
||||
*/
|
||||
if(w % 2 == 1 || h % 2 == 1)
|
||||
{
|
||||
/* copy three pixel after the last one */
|
||||
for(int i = 0; i < 3; i++)
|
||||
*((fb_data *)FRAME + w * h + i) = *((fb_data *)FRAME + i);
|
||||
/* WARNING we need to update w and h to reflect the pixel count BUT it
|
||||
* has no relation to w * h (it can even be 2 * prime). Hopefully, w <= 240 and
|
||||
* h <= 320 so w * h <= 76800 and (w * h + 3) / 4 <= 38400 which fits into
|
||||
* a 16-bit integer (horizontal count). */
|
||||
h = (w * h + 3) / 4;
|
||||
w = 4;
|
||||
}
|
||||
imx233_lcdif_dma_send((void *)FRAME_PHYS_ADDR, w, h);
|
||||
}
|
||||
|
||||
void lcd_yuv_set_options(unsigned options)
|
||||
{
|
||||
lcd_yuv_options = options;
|
||||
}
|
||||
|
||||
#define YFAC (74)
|
||||
#define RVFAC (101)
|
||||
#define GUFAC (-24)
|
||||
#define GVFAC (-51)
|
||||
#define BUFAC (128)
|
||||
|
||||
static inline int clamp(int val, int min, int max)
|
||||
{
|
||||
if (val < min)
|
||||
val = min;
|
||||
else if (val > max)
|
||||
val = max;
|
||||
return val;
|
||||
}
|
||||
|
||||
void lcd_blit_yuv(unsigned char * const src[3],
|
||||
int src_x, int src_y, int stride,
|
||||
int x, int y, int width, int height)
|
||||
{
|
||||
const unsigned char *ysrc, *usrc, *vsrc;
|
||||
int linecounter;
|
||||
fb_data *dst, *row_end;
|
||||
long z;
|
||||
|
||||
/* width and height must be >= 2 and an even number */
|
||||
width &= ~1;
|
||||
linecounter = height >> 1;
|
||||
|
||||
#if LCD_WIDTH >= LCD_HEIGHT
|
||||
dst = FBADDR(x,y);
|
||||
row_end = dst + width;
|
||||
#else
|
||||
dst = FBADDR(LCD_WIDTH - y - 1,x);
|
||||
row_end = dst + LCD_WIDTH * width;
|
||||
#endif
|
||||
|
||||
z = stride * src_y;
|
||||
ysrc = src[0] + z + src_x;
|
||||
usrc = src[1] + (z >> 2) + (src_x >> 1);
|
||||
vsrc = src[2] + (usrc - src[1]);
|
||||
|
||||
/* stride => amount to jump from end of last row to start of next */
|
||||
stride -= width;
|
||||
|
||||
/* upsampling, YUV->RGB conversion and reduction to RGB565 in one go */
|
||||
|
||||
do
|
||||
{
|
||||
do
|
||||
{
|
||||
int y, cb, cr, rv, guv, bu, r, g, b;
|
||||
|
||||
y = YFAC*(*ysrc++ - 16);
|
||||
cb = *usrc++ - 128;
|
||||
cr = *vsrc++ - 128;
|
||||
|
||||
rv = RVFAC*cr;
|
||||
guv = GUFAC*cb + GVFAC*cr;
|
||||
bu = BUFAC*cb;
|
||||
|
||||
r = y + rv;
|
||||
g = y + guv;
|
||||
b = y + bu;
|
||||
|
||||
if ((unsigned)(r | g | b) > 64*256-1)
|
||||
{
|
||||
r = clamp(r, 0, 64*256-1);
|
||||
g = clamp(g, 0, 64*256-1);
|
||||
b = clamp(b, 0, 64*256-1);
|
||||
}
|
||||
|
||||
*dst = LCD_RGBPACK_LCD(r >> 9, g >> 8, b >> 9);
|
||||
|
||||
#if LCD_WIDTH >= LCD_HEIGHT
|
||||
dst++;
|
||||
#else
|
||||
dst += LCD_WIDTH;
|
||||
#endif
|
||||
|
||||
y = YFAC*(*ysrc++ - 16);
|
||||
r = y + rv;
|
||||
g = y + guv;
|
||||
b = y + bu;
|
||||
|
||||
if ((unsigned)(r | g | b) > 64*256-1)
|
||||
{
|
||||
r = clamp(r, 0, 64*256-1);
|
||||
g = clamp(g, 0, 64*256-1);
|
||||
b = clamp(b, 0, 64*256-1);
|
||||
}
|
||||
|
||||
*dst = LCD_RGBPACK_LCD(r >> 9, g >> 8, b >> 9);
|
||||
|
||||
#if LCD_WIDTH >= LCD_HEIGHT
|
||||
dst++;
|
||||
#else
|
||||
dst += LCD_WIDTH;
|
||||
#endif
|
||||
}
|
||||
while (dst < row_end);
|
||||
|
||||
ysrc += stride;
|
||||
usrc -= width >> 1;
|
||||
vsrc -= width >> 1;
|
||||
|
||||
#if LCD_WIDTH >= LCD_HEIGHT
|
||||
row_end += LCD_WIDTH;
|
||||
dst += LCD_WIDTH - width;
|
||||
#else
|
||||
row_end -= 1;
|
||||
dst -= LCD_WIDTH*width + 1;
|
||||
#endif
|
||||
|
||||
do
|
||||
{
|
||||
int y, cb, cr, rv, guv, bu, r, g, b;
|
||||
|
||||
y = YFAC*(*ysrc++ - 16);
|
||||
cb = *usrc++ - 128;
|
||||
cr = *vsrc++ - 128;
|
||||
|
||||
rv = RVFAC*cr;
|
||||
guv = GUFAC*cb + GVFAC*cr;
|
||||
bu = BUFAC*cb;
|
||||
|
||||
r = y + rv;
|
||||
g = y + guv;
|
||||
b = y + bu;
|
||||
|
||||
if ((unsigned)(r | g | b) > 64*256-1)
|
||||
{
|
||||
r = clamp(r, 0, 64*256-1);
|
||||
g = clamp(g, 0, 64*256-1);
|
||||
b = clamp(b, 0, 64*256-1);
|
||||
}
|
||||
|
||||
*dst = LCD_RGBPACK_LCD(r >> 9, g >> 8, b >> 9);
|
||||
|
||||
#if LCD_WIDTH >= LCD_HEIGHT
|
||||
dst++;
|
||||
#else
|
||||
dst += LCD_WIDTH;
|
||||
#endif
|
||||
|
||||
y = YFAC*(*ysrc++ - 16);
|
||||
r = y + rv;
|
||||
g = y + guv;
|
||||
b = y + bu;
|
||||
|
||||
if ((unsigned)(r | g | b) > 64*256-1)
|
||||
{
|
||||
r = clamp(r, 0, 64*256-1);
|
||||
g = clamp(g, 0, 64*256-1);
|
||||
b = clamp(b, 0, 64*256-1);
|
||||
}
|
||||
|
||||
*dst = LCD_RGBPACK_LCD(r >> 9, g >> 8, b >> 9);
|
||||
|
||||
#if LCD_WIDTH >= LCD_HEIGHT
|
||||
dst++;
|
||||
#else
|
||||
dst += LCD_WIDTH;
|
||||
#endif
|
||||
}
|
||||
while (dst < row_end);
|
||||
|
||||
ysrc += stride;
|
||||
usrc += stride >> 1;
|
||||
vsrc += stride >> 1;
|
||||
|
||||
#if LCD_WIDTH >= LCD_HEIGHT
|
||||
row_end += LCD_WIDTH;
|
||||
dst += LCD_WIDTH - width;
|
||||
#else
|
||||
row_end -= 1;
|
||||
dst -= LCD_WIDTH*width + 1;
|
||||
#endif
|
||||
}
|
||||
while (--linecounter > 0);
|
||||
|
||||
#if LCD_WIDTH >= LCD_HEIGHT
|
||||
lcd_update_rect(x, y, width, height);
|
||||
#else
|
||||
lcd_update_rect(LCD_WIDTH - y - height, x, height, width);
|
||||
#endif
|
||||
}
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2011 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#include "system.h"
|
||||
#include "power.h"
|
||||
#include "tuner.h"
|
||||
#include "fmradio_i2c.h"
|
||||
#include "pinctrl-imx233.h"
|
||||
|
||||
static bool tuner_enable = false;
|
||||
|
||||
bool tuner_power(bool enable)
|
||||
{
|
||||
if(enable != tuner_enable)
|
||||
{
|
||||
tuner_enable = enable;
|
||||
}
|
||||
return tuner_enable;
|
||||
}
|
||||
|
||||
bool tuner_powered(void)
|
||||
{
|
||||
return tuner_enable;
|
||||
}
|
||||
|
|
@ -0,0 +1,60 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2011 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#ifndef POWERMGMT_TARGET_H
|
||||
#define POWERMGMT_TARGET_H
|
||||
|
||||
#include "config.h"
|
||||
#include "powermgmt-imx233.h"
|
||||
|
||||
/* Creative ZEN X-Fi2 OF settings:
|
||||
* - current ramp slope: 100 mA/s
|
||||
* - conditioning threshold voltage: 3 V
|
||||
* - conditioning max voltage: 3.1 V
|
||||
* - conditioning current: 60 mA
|
||||
* - conditioning timeout: 1 h
|
||||
* - charging voltage: 4.2 V
|
||||
* - charging current: 550 mA
|
||||
* - charging threshold current: 60 mA
|
||||
* - charging timeout: 4 h
|
||||
* - top off period: 30 min
|
||||
* - high die temperature: 74 °C
|
||||
* - low die temperature: 56 °C
|
||||
* - safe die temperature current: 30 mA
|
||||
* - battery temperature channel: 1
|
||||
* - high battery temperature: 440
|
||||
* - low battery temperature: 605
|
||||
* - safe battery temperature current: 0 mA
|
||||
* - low DCDC battery voltage: 3.9 V
|
||||
*
|
||||
* FIXME is this an OF bug that low batt temp > high batt temp ?
|
||||
*/
|
||||
|
||||
#define IMX233_CHARGE_CURRENT 550
|
||||
#define IMX233_STOP_CURRENT 60
|
||||
#define IMX233_TOPOFF_TIMEOUT (30 * 60 * HZ)
|
||||
#define IMX233_CHARGING_TIMEOUT (4 * 3600 * HZ)
|
||||
#define IMX233_DIE_TEMP_HIGH 74
|
||||
#define IMX233_DIE_TEMP_LOW 56
|
||||
#define IMX233_BATT_TEMP_SENSOR 1
|
||||
#define IMX233_BATT_TEMP_HIGH 440
|
||||
#define IMX233_BATT_TEMP_LOW 605
|
||||
|
||||
#endif /* POWERMGMT_TARGET_H */
|
||||
|
|
@ -0,0 +1,46 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2011 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#include "config.h"
|
||||
#include "powermgmt-target.h"
|
||||
|
||||
const unsigned short battery_level_dangerous[BATTERY_TYPES_COUNT] =
|
||||
{
|
||||
3659
|
||||
};
|
||||
|
||||
const unsigned short battery_level_shutoff[BATTERY_TYPES_COUNT] =
|
||||
{
|
||||
3630
|
||||
};
|
||||
|
||||
/* voltages (millivolt) of 0%, 10%, ... 100% when charging disabled */
|
||||
const unsigned short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11] =
|
||||
{
|
||||
/* Toshiba Gigabeat S Li Ion 700mAH figured from discharge curve */
|
||||
{ 3659, 3719, 3745, 3761, 3785, 3813, 3856, 3926, 3984, 4040, 4121 },
|
||||
};
|
||||
|
||||
/* voltages (millivolt) of 0%, 10%, ... 100% when charging enabled */
|
||||
const unsigned short percent_to_volt_charge[11] =
|
||||
{
|
||||
/* Toshiba Gigabeat S Li Ion 700mAH figured from charge curve */
|
||||
4028, 4063, 4087, 4111, 4135, 4156, 4173, 4185, 4194, 4202, 4208
|
||||
};
|
||||
|
|
@ -0,0 +1,32 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2012 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#ifndef _ADC_TARGET_H_
|
||||
#define _ADC_TARGET_H_
|
||||
|
||||
#define NUM_ADC_CHANNELS 5
|
||||
|
||||
#define ADC_BATTERY 0
|
||||
#define ADC_DIE_TEMP 1
|
||||
#define ADC_VDDIO 2
|
||||
#define ADC_5V 3
|
||||
#define ADC_BATT_TEMP 4
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,40 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2012 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#include "adc-target.h"
|
||||
#include "adc-imx233.h"
|
||||
|
||||
int imx233_adc_mapping[] =
|
||||
{
|
||||
[ADC_BATTERY] = IMX233_ADC_BATTERY,
|
||||
[ADC_DIE_TEMP] = IMX233_ADC_DIE_TEMP,
|
||||
[ADC_VDDIO] = IMX233_ADC_VDDIO,
|
||||
[ADC_5V] = HW_LRADC_CHANNEL_5V,
|
||||
[ADC_BATT_TEMP] = IMX233_ADC_BATT_TEMP,
|
||||
};
|
||||
|
||||
const char *imx233_adc_channel_name[] =
|
||||
{
|
||||
"Battery(raw)",
|
||||
"Die temperature(°C)",
|
||||
"VddIO",
|
||||
"Vdd5V",
|
||||
"Battery temperature(raw)",
|
||||
};
|
||||
|
|
@ -0,0 +1,61 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2012 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#include "config.h"
|
||||
#include "system.h"
|
||||
#include "audiohw.h"
|
||||
#include "audio.h"
|
||||
#include "audioout-imx233.h"
|
||||
#include "audioin-imx233.h"
|
||||
#include "pinctrl-imx233.h"
|
||||
|
||||
static int input_source = AUDIO_SRC_PLAYBACK;
|
||||
static unsigned input_flags = 0;
|
||||
static int output_source = AUDIO_SRC_PLAYBACK;
|
||||
|
||||
static void select_audio_path(void)
|
||||
{
|
||||
/* route audio to HP */
|
||||
imx233_set_pin_function(1, 30, PINCTRL_FUNCTION_GPIO);
|
||||
imx233_enable_gpio_output(1, 30, true);
|
||||
imx233_set_gpio_output(1, 30, true);
|
||||
|
||||
if(input_source == AUDIO_SRC_PLAYBACK)
|
||||
imx233_audioout_select_hp_input(false);
|
||||
else
|
||||
imx233_audioout_select_hp_input(true);
|
||||
}
|
||||
|
||||
void audio_input_mux(int source, unsigned flags)
|
||||
{
|
||||
(void) source;
|
||||
(void) flags;
|
||||
input_source = source;
|
||||
input_flags = flags;
|
||||
select_audio_path();
|
||||
}
|
||||
|
||||
void audio_set_output_source(int source)
|
||||
{
|
||||
(void) source;
|
||||
output_source = source;
|
||||
select_audio_path();
|
||||
}
|
||||
|
||||
|
|
@ -0,0 +1,33 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2011 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#ifndef BACKLIGHT_TARGET_H
|
||||
#define BACKLIGHT_TARGET_H
|
||||
|
||||
bool _backlight_init(void);
|
||||
void _backlight_on(void);
|
||||
void _backlight_off(void);
|
||||
void _backlight_set_brightness(int brightness);
|
||||
|
||||
void _buttonlight_on(void);
|
||||
void _buttonlight_off(void);
|
||||
void _buttonlight_set_brightness(int brightness);
|
||||
|
||||
#endif /* BACKLIGHT_TARGET_H */
|
||||
|
|
@ -0,0 +1,85 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2012 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#include "config.h"
|
||||
#include "system.h"
|
||||
#include "lcd.h"
|
||||
#include "backlight.h"
|
||||
#include "backlight-target.h"
|
||||
#include "pwm-imx233.h"
|
||||
#include "mpr121.h"
|
||||
|
||||
void _backlight_set_brightness(int brightness)
|
||||
{
|
||||
imx233_pwm_setup_channel(2, 1024, HW_PWM_PERIODx__CDIV__DIV_1,
|
||||
0, HW_PWM_PERIODx__STATE__HIGH,
|
||||
(brightness * 1024) / 100, HW_PWM_PERIODx__STATE__LOW);
|
||||
imx233_pwm_enable_channel(2, true);
|
||||
}
|
||||
|
||||
bool _backlight_init(void)
|
||||
{
|
||||
_backlight_set_brightness(DEFAULT_BRIGHTNESS_SETTING);
|
||||
return true;
|
||||
}
|
||||
|
||||
void _backlight_on(void)
|
||||
{
|
||||
#ifdef HAVE_LCD_ENABLE
|
||||
lcd_enable(true); /* power on lcd + visible display */
|
||||
#endif
|
||||
/* don't do anything special, the core will set the brightness */
|
||||
}
|
||||
|
||||
void _backlight_off(void)
|
||||
{
|
||||
/* there is no real on/off but we can set to 0 brightness */
|
||||
_backlight_set_brightness(0);
|
||||
#ifdef HAVE_LCD_ENABLE
|
||||
lcd_enable(false); /* power off visible display */
|
||||
#endif
|
||||
}
|
||||
|
||||
/* ELE8 is the button light GPIO */
|
||||
void _buttonlight_on(void)
|
||||
{
|
||||
/* assume mpr121 was initialized by button-zenxfi3.c */
|
||||
mpr121_set_gpio_output(8, ELE_GPIO_SET);
|
||||
}
|
||||
|
||||
void _buttonlight_off(void)
|
||||
{
|
||||
/* assume mpr121 was initialized by button-zenxfi3.c */
|
||||
mpr121_set_gpio_output(8, ELE_GPIO_CLR);
|
||||
}
|
||||
|
||||
void _buttonlight_set_brightness(int brightness)
|
||||
{
|
||||
/* assume mpr121 was initialized by button-zenxfi3.c */
|
||||
/* since backlight brightness is the same for the screen and the button light,
|
||||
* map [MIN_BRIGHTNESS_SETTING,MAX_BRIGHTNESS_SETTING] to
|
||||
* [ELE_PWM_MIN_DUTY,ELE_PWM_MAX_DUTY] */
|
||||
brightness = ELE_PWM_MIN_DUTY + (brightness - MIN_BRIGHTNESS_SETTING) *
|
||||
(ELE_PWM_MAX_DUTY - ELE_PWM_MIN_DUTY + 1) /
|
||||
(MAX_BRIGHTNESS_SETTING - MIN_BRIGHTNESS_SETTING + 1);
|
||||
brightness = MIN(brightness, ELE_PWM_MAX_DUTY);
|
||||
mpr121_set_gpio_pwm(8, brightness);
|
||||
}
|
||||
|
|
@ -0,0 +1,54 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2012 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#ifndef _BUTTON_TARGET_H_
|
||||
#define _BUTTON_TARGET_H_
|
||||
|
||||
#include <stdbool.h>
|
||||
#include "config.h"
|
||||
|
||||
void button_init_device(void);
|
||||
int button_read_device(void);
|
||||
bool button_debug_screen(void);
|
||||
|
||||
#define HAS_BUTTON_HOLD
|
||||
|
||||
/* Main unit's buttons */
|
||||
#define BUTTON_POWER 0x00000001
|
||||
#define BUTTON_MENU 0x00000002
|
||||
#define BUTTON_BACK 0x00000004
|
||||
#define BUTTON_PLAY 0x00000008
|
||||
#define BUTTON_UP 0x00000010
|
||||
#define BUTTON_DOWN 0x00000020
|
||||
#define BUTTON_VOL_UP 0x00000040
|
||||
#define BUTTON_VOL_DOWN 0x00000080
|
||||
/* For compatibility */
|
||||
#define BUTTON_LEFT BUTTON_BACK
|
||||
#define BUTTON_RIGHT BUTTON_PLAY
|
||||
|
||||
#define BUTTON_MAIN 0xff
|
||||
|
||||
#define BUTTON_REMOTE 0
|
||||
|
||||
/* Software power-off */
|
||||
#define POWEROFF_BUTTON BUTTON_POWER
|
||||
#define POWEROFF_COUNT 10
|
||||
|
||||
#endif /* _BUTTON_TARGET_H_ */
|
||||
|
|
@ -0,0 +1,171 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2012 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#include "button-target.h"
|
||||
#include "system.h"
|
||||
#include "system-target.h"
|
||||
#include "pinctrl-imx233.h"
|
||||
#include "power-imx233.h"
|
||||
#include "string.h"
|
||||
#include "usb.h"
|
||||
#include "backlight.h"
|
||||
#include "mpr121.h"
|
||||
|
||||
static struct mpr121_config_t config =
|
||||
{
|
||||
.ele =
|
||||
{
|
||||
[0] = {.tth = 5, .rth = 4 },
|
||||
[1] = {.tth = 5, .rth = 4 },
|
||||
[2] = {.tth = 5, .rth = 4 },
|
||||
[3] = {.tth = 5, .rth = 4 },
|
||||
[4] = {.tth = 4, .rth = 3 },
|
||||
[5] = {.tth = 4, .rth = 3 },
|
||||
[6] = {.tth = 5, .rth = 4 },
|
||||
[7] = {.tth = 5, .rth = 4 },
|
||||
[8] = {.gpio = ELE_GPIO_OUTPUT_OPEN_LED },
|
||||
},
|
||||
.filters =
|
||||
{
|
||||
.ele =
|
||||
{
|
||||
.rising = {.mhd = 1, .nhd = 1, .ncl = 1, .fdl = 1 },
|
||||
.falling = {.mhd = 1, .nhd = 1, .ncl = 0xff, .fdl = 2 },
|
||||
}
|
||||
},
|
||||
.autoconf =
|
||||
{
|
||||
.en = true, .ren = true, .retry = RETRY_NEVER,
|
||||
.usl = 0xc4, .lsl = 0x7f, .tl = 0xb0
|
||||
},
|
||||
.ele_en = ELE_EN0_x(7),
|
||||
.cal_lock = CL_TRACK
|
||||
};
|
||||
|
||||
#define MPR121_INTERRUPT 1
|
||||
|
||||
static int touchpad_btns = 0;
|
||||
static long mpr121_stack[DEFAULT_STACK_SIZE/sizeof(long)];
|
||||
static const char mpr121_thread_name[] = "mpr121";
|
||||
static struct event_queue mpr121_queue;
|
||||
|
||||
static void mpr121_irq_cb(int bank, int pin)
|
||||
{
|
||||
(void) bank;
|
||||
(void) pin;
|
||||
/* the callback will not be fired until interrupt is enabled back so
|
||||
* the queue will not overflow or contain multiple MPR121_INTERRUPT events */
|
||||
queue_post(&mpr121_queue, MPR121_INTERRUPT, 0);
|
||||
}
|
||||
|
||||
static void mpr121_thread(void)
|
||||
{
|
||||
struct queue_event ev;
|
||||
|
||||
while(1)
|
||||
{
|
||||
queue_wait(&mpr121_queue, &ev);
|
||||
/* handle usb connect and ignore all messages except rmi interrupts */
|
||||
if(ev.id == SYS_USB_CONNECTED)
|
||||
{
|
||||
usb_acknowledge(SYS_USB_CONNECTED_ACK);
|
||||
continue;
|
||||
}
|
||||
else if(ev.id != MPR121_INTERRUPT)
|
||||
continue;
|
||||
/* clear interrupt and get status */
|
||||
unsigned status;
|
||||
touchpad_btns = 0;
|
||||
if(!mpr121_get_touch_status(&status))
|
||||
{
|
||||
/* ELE3: up
|
||||
* ELE4: back
|
||||
* ELE5: menu
|
||||
* ELE6: down
|
||||
* ELE7: play */
|
||||
if(status & 0x8) touchpad_btns |= BUTTON_UP;
|
||||
if(status & 0x10) touchpad_btns |= BUTTON_BACK;
|
||||
if(status & 0x20) touchpad_btns |= BUTTON_MENU;
|
||||
if(status & 0x40) touchpad_btns |= BUTTON_DOWN;
|
||||
if(status & 0x80) touchpad_btns |= BUTTON_PLAY;
|
||||
}
|
||||
/* enable interrupt */
|
||||
imx233_setup_pin_irq(0, 18, true, true, false, &mpr121_irq_cb);
|
||||
}
|
||||
}
|
||||
|
||||
/* B0P18 is #IRQ line of the touchpad */
|
||||
void button_init_device(void)
|
||||
{
|
||||
mpr121_init(0xb4);
|
||||
mpr121_soft_reset();
|
||||
mpr121_set_config(&config);
|
||||
|
||||
queue_init(&mpr121_queue, true);
|
||||
create_thread(mpr121_thread, mpr121_stack, sizeof(mpr121_stack), 0,
|
||||
mpr121_thread_name IF_PRIO(, PRIORITY_USER_INTERFACE) IF_COP(, CPU));
|
||||
/* enable interrupt */
|
||||
imx233_set_pin_function(0, 18, PINCTRL_FUNCTION_GPIO);
|
||||
imx233_enable_gpio_output(0, 18, false);
|
||||
imx233_setup_pin_irq(0, 18, true, true, false, &mpr121_irq_cb);
|
||||
}
|
||||
|
||||
bool button_hold(void)
|
||||
{
|
||||
/* B0P04: #hold */
|
||||
return !imx233_get_gpio_input_mask(0, 0x10);
|
||||
}
|
||||
|
||||
int button_read_device(void)
|
||||
{
|
||||
/* since sliding hold will usually trigger power, ignore power button
|
||||
* for one second after hold is released */
|
||||
static int power_ignore_counter = 0;
|
||||
static bool old_hold;
|
||||
/* light handling */
|
||||
bool hold = button_hold();
|
||||
if(hold != old_hold)
|
||||
{
|
||||
old_hold = hold;
|
||||
#ifndef BOOTLOADER
|
||||
backlight_hold_changed(hold);
|
||||
#endif /* BOOTLOADER */
|
||||
if(!hold)
|
||||
power_ignore_counter = HZ;
|
||||
}
|
||||
|
||||
if(power_ignore_counter)
|
||||
power_ignore_counter--;
|
||||
|
||||
int res = 0;
|
||||
/* B2P07: #volume-
|
||||
* B2P08: #volume+
|
||||
* PSWITCH: power */
|
||||
uint32_t mask = imx233_get_gpio_input_mask(2, 0x180);
|
||||
if(!(mask & 0x80))
|
||||
res |= BUTTON_VOL_DOWN;
|
||||
if(!(mask & 0x100))
|
||||
res |= BUTTON_VOL_UP;
|
||||
/* WARNING: it seems that the voltage on PSWITCH depends on whether
|
||||
* usb is connected or not ! Thus the value of this field can be 1 or 3 */
|
||||
if(__XTRACT(HW_POWER_STS, PSWITCH) != 0 && power_ignore_counter == 0)
|
||||
res |= BUTTON_POWER;
|
||||
return res | touchpad_btns;
|
||||
}
|
||||
|
|
@ -0,0 +1,28 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2012 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#include "system.h"
|
||||
#include "button-target.h"
|
||||
|
||||
bool dbg_hw_target_info(void)
|
||||
{
|
||||
return false;
|
||||
}
|
||||
|
|
@ -0,0 +1,24 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (c) 2012 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#ifndef LCD_TARGET_H
|
||||
#define LCD_TARGET_H
|
||||
|
||||
#endif /* LCD_TARGET_H */
|
||||
|
|
@ -0,0 +1,490 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (c) 2012 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#include <sys/types.h> /* off_t */
|
||||
#include <string.h>
|
||||
#include "cpu.h"
|
||||
#include "system.h"
|
||||
#include "backlight-target.h"
|
||||
#include "lcd.h"
|
||||
#include "lcdif-imx233.h"
|
||||
#include "clkctrl-imx233.h"
|
||||
#include "pinctrl-imx233.h"
|
||||
#include "logf.h"
|
||||
|
||||
#ifdef HAVE_LCD_ENABLE
|
||||
static bool lcd_on;
|
||||
#endif
|
||||
static unsigned lcd_yuv_options = 0;
|
||||
|
||||
static void setup_parameters(void)
|
||||
{
|
||||
imx233_lcdif_reset();
|
||||
imx233_lcdif_set_lcd_databus_width(HW_LCDIF_CTRL__LCD_DATABUS_WIDTH_16_BIT);
|
||||
imx233_lcdif_set_word_length(HW_LCDIF_CTRL__WORD_LENGTH_16_BIT);
|
||||
imx233_lcdif_set_timings(2, 2, 3, 3);
|
||||
}
|
||||
|
||||
static void setup_lcd_pins(bool use_lcdif)
|
||||
{
|
||||
if(use_lcdif)
|
||||
{
|
||||
imx233_set_pin_function(1, 25, PINCTRL_FUNCTION_MAIN); /* lcd_vsync */
|
||||
imx233_set_pin_function(1, 21, PINCTRL_FUNCTION_MAIN); /* lcd_cs */
|
||||
imx233_set_pin_function(1, 22, PINCTRL_FUNCTION_MAIN); /* lcd_dotclk */
|
||||
imx233_set_pin_function(1, 23, PINCTRL_FUNCTION_MAIN); /* lcd_enable */
|
||||
imx233_set_pin_function(1, 24, PINCTRL_FUNCTION_MAIN); /* lcd_hsync */
|
||||
imx233_set_pin_function(1, 18, PINCTRL_FUNCTION_MAIN); /* lcd_reset */
|
||||
imx233_set_pin_function(1, 19, PINCTRL_FUNCTION_MAIN); /* lcd_rs */
|
||||
imx233_set_pin_function(1, 16, PINCTRL_FUNCTION_MAIN); /* lcd_d16 */
|
||||
imx233_set_pin_function(1, 17, PINCTRL_FUNCTION_MAIN); /* lcd_d17 */
|
||||
imx233_set_pin_function(1, 20, PINCTRL_FUNCTION_MAIN); /* lcd_wr */
|
||||
__REG_CLR(HW_PINCTRL_MUXSEL(2)) = 0xffffffff; /* lcd_d{0-15} */
|
||||
}
|
||||
else
|
||||
{
|
||||
__REG_SET(HW_PINCTRL_MUXSEL(2)) = 0xffffffff; /* lcd_d{0-15} */
|
||||
imx233_enable_gpio_output_mask(1, 0x3ffffff, false); /* lcd_{d{0-17},reset,rs,wr,cs,dotclk,enable,hsync,vsync} */
|
||||
imx233_set_pin_function(1, 16, PINCTRL_FUNCTION_GPIO); /* lcd_d16 */
|
||||
imx233_set_pin_function(1, 17, PINCTRL_FUNCTION_GPIO); /* lcd_d17 */
|
||||
imx233_set_pin_function(1, 19, PINCTRL_FUNCTION_GPIO); /* lcd_rs */
|
||||
imx233_set_pin_function(1, 20, PINCTRL_FUNCTION_GPIO); /* lcd_wr */
|
||||
imx233_set_pin_function(1, 21, PINCTRL_FUNCTION_GPIO); /* lcd_cs */
|
||||
imx233_set_pin_function(1, 22, PINCTRL_FUNCTION_GPIO); /* lcd_dotclk */
|
||||
imx233_set_pin_function(1, 23, PINCTRL_FUNCTION_GPIO); /* lcd_enable */
|
||||
imx233_set_pin_function(1, 24, PINCTRL_FUNCTION_GPIO); /* lcd_hsync */
|
||||
imx233_set_pin_function(1, 25, PINCTRL_FUNCTION_GPIO); /* lcd_vsync */
|
||||
}
|
||||
}
|
||||
|
||||
static void common_lcd_enable(bool enable)
|
||||
{
|
||||
imx233_lcdif_enable(enable);
|
||||
setup_lcd_pins(enable); /* use GPIO pins when disable */
|
||||
}
|
||||
|
||||
static void setup_lcdif(void)
|
||||
{
|
||||
setup_parameters();
|
||||
common_lcd_enable(true);
|
||||
imx233_lcdif_enable_bus_master(true);
|
||||
}
|
||||
|
||||
static void setup_lcdif_clock(void)
|
||||
{
|
||||
/* the LCD seems to work at 24Mhz, so use the xtal clock with no divider */
|
||||
imx233_clkctrl_enable_clock(CLK_PIX, false);
|
||||
imx233_clkctrl_set_clock_divisor(CLK_PIX, 1);
|
||||
imx233_clkctrl_set_bypass_pll(CLK_PIX, true); /* use XTAL */
|
||||
imx233_clkctrl_enable_clock(CLK_PIX, true);
|
||||
}
|
||||
|
||||
static void lcd_write_reg(uint32_t reg, uint32_t data)
|
||||
{
|
||||
imx233_lcdif_pio_send(false, 2, ®);
|
||||
if(reg != 0x22)
|
||||
imx233_lcdif_pio_send(true, 2, &data);
|
||||
}
|
||||
|
||||
#define REG_UDELAY 0xffffffff
|
||||
struct lcd_sequence_entry_t
|
||||
{
|
||||
uint32_t reg, data;
|
||||
};
|
||||
|
||||
static void lcd_send_sequence(struct lcd_sequence_entry_t *seq, unsigned count)
|
||||
{
|
||||
for(;count-- > 0; seq++)
|
||||
{
|
||||
if(seq->reg == REG_UDELAY)
|
||||
udelay(seq->data);
|
||||
else
|
||||
lcd_write_reg(seq->reg, seq->data);
|
||||
}
|
||||
}
|
||||
|
||||
#define _begin_seq() static struct lcd_sequence_entry_t __seq[] = {
|
||||
#define _udelay(a) {REG_UDELAY, a},
|
||||
#define _lcd_write_reg(a, b) {a, b},
|
||||
#define _end_seq() }; lcd_send_sequence(__seq, sizeof(__seq) / sizeof(__seq[0]));
|
||||
|
||||
static void lcd_init_seq(void)
|
||||
{
|
||||
_begin_seq()
|
||||
_lcd_write_reg(1, 0x11c)
|
||||
_lcd_write_reg(2, 0x100)
|
||||
_lcd_write_reg(3, 0x1030)
|
||||
_lcd_write_reg(8, 0x808)
|
||||
_lcd_write_reg(0xc, 0)
|
||||
_lcd_write_reg(0xf, 0xc01)
|
||||
_lcd_write_reg(0x20, 0)
|
||||
_lcd_write_reg(0x21, 0)
|
||||
_udelay(30)
|
||||
_lcd_write_reg(0x10, 0xa00)
|
||||
_lcd_write_reg(0x11, 0x1038)
|
||||
_udelay(30)
|
||||
_lcd_write_reg(0x12, 0x1010)
|
||||
_lcd_write_reg(0x13, 0x50)
|
||||
_lcd_write_reg(0x14, 0x4f58)
|
||||
_lcd_write_reg(0x30, 0)
|
||||
_lcd_write_reg(0x31, 0xdb)
|
||||
_lcd_write_reg(0x32, 0)
|
||||
_lcd_write_reg(0x33, 0)
|
||||
_lcd_write_reg(0x34, 0xdb)
|
||||
_lcd_write_reg(0x35, 0)
|
||||
_lcd_write_reg(0x36, 0xaf)
|
||||
_lcd_write_reg(0x37, 0)
|
||||
_lcd_write_reg(0x38, 0xdb)
|
||||
_lcd_write_reg(0x39, 0)
|
||||
_lcd_write_reg(0x50, 0)
|
||||
_lcd_write_reg(0x51, 0x705)
|
||||
_lcd_write_reg(0x52, 0xe0a)
|
||||
_lcd_write_reg(0x53, 0x300)
|
||||
_lcd_write_reg(0x54, 0xa0e)
|
||||
_lcd_write_reg(0x55, 0x507)
|
||||
_lcd_write_reg(0x56, 0)
|
||||
_lcd_write_reg(0x57, 3)
|
||||
_lcd_write_reg(0x58, 0x90a)
|
||||
_lcd_write_reg(0x59, 0xa09)
|
||||
_udelay(30)
|
||||
_lcd_write_reg(7, 0x1017)
|
||||
_udelay(40)
|
||||
_end_seq()
|
||||
}
|
||||
|
||||
void lcd_init_device(void)
|
||||
{
|
||||
setup_lcdif();
|
||||
setup_lcdif_clock();
|
||||
|
||||
// reset device
|
||||
__REG_SET(HW_LCDIF_CTRL1) = HW_LCDIF_CTRL1__RESET;
|
||||
mdelay(50);
|
||||
__REG_CLR(HW_LCDIF_CTRL1) = HW_LCDIF_CTRL1__RESET;
|
||||
mdelay(10);
|
||||
__REG_SET(HW_LCDIF_CTRL1) = HW_LCDIF_CTRL1__RESET;
|
||||
|
||||
lcd_init_seq();
|
||||
#ifdef HAVE_LCD_ENABLE
|
||||
lcd_on = true;
|
||||
#endif
|
||||
}
|
||||
|
||||
#ifdef HAVE_LCD_ENABLE
|
||||
bool lcd_active(void)
|
||||
{
|
||||
return lcd_on;
|
||||
}
|
||||
|
||||
static void lcd_enable_seq(bool enable)
|
||||
{
|
||||
if(!enable)
|
||||
{
|
||||
_begin_seq()
|
||||
_end_seq()
|
||||
}
|
||||
else
|
||||
{
|
||||
_begin_seq()
|
||||
_end_seq()
|
||||
}
|
||||
}
|
||||
|
||||
void lcd_enable(bool enable)
|
||||
{
|
||||
if(lcd_on == enable)
|
||||
return;
|
||||
|
||||
lcd_on = enable;
|
||||
|
||||
if(enable)
|
||||
common_lcd_enable(true);
|
||||
lcd_enable_seq(enable);
|
||||
if(!enable)
|
||||
common_lcd_enable(false);
|
||||
}
|
||||
#endif
|
||||
|
||||
void lcd_update(void)
|
||||
{
|
||||
lcd_update_rect(0, 0, LCD_WIDTH, LCD_HEIGHT);
|
||||
}
|
||||
|
||||
void lcd_update_rect(int x, int y, int w, int h)
|
||||
{
|
||||
#ifdef HAVE_LCD_ENABLE
|
||||
if(!lcd_on)
|
||||
return;
|
||||
#endif
|
||||
/* make sure the rectangle is included in the screen */
|
||||
x = MIN(x, LCD_WIDTH);
|
||||
y = MIN(y, LCD_HEIGHT);
|
||||
w = MIN(w, LCD_WIDTH - x);
|
||||
h = MIN(h, LCD_HEIGHT - y);
|
||||
|
||||
imx233_lcdif_wait_ready();
|
||||
lcd_write_reg(0x37, x);
|
||||
lcd_write_reg(0x36, x + w - 1);
|
||||
lcd_write_reg(0x39, y);
|
||||
lcd_write_reg(0x38, y + h - 1);
|
||||
lcd_write_reg(0x20, x);
|
||||
lcd_write_reg(0x21, y);
|
||||
lcd_write_reg(0x22, 0);
|
||||
|
||||
imx233_lcdif_wait_ready();
|
||||
imx233_lcdif_set_word_length(HW_LCDIF_CTRL__WORD_LENGTH_16_BIT);
|
||||
imx233_lcdif_set_byte_packing_format(0xf); /* two pixels per 32-bit word */
|
||||
imx233_lcdif_set_data_format(false, false, false); /* RGB565, don't care, don't care */
|
||||
|
||||
/* there are two cases here:
|
||||
* - either width = LCD_WIDTH and we can directly memcopy a part of lcd_framebuffer to FRAME
|
||||
* and send it
|
||||
* - either width != LCD_WIDTH and we have to build a contiguous copy of the rectangular area
|
||||
* into FRAME before sending it (which is slower and doesn't use the hardware)
|
||||
* In all cases, FRAME just acts as a temporary buffer.
|
||||
* NOTE It's more interesting to do a copy to FRAME in all cases since in system mode
|
||||
* the clock runs at 24MHz which provides barely 10MB/s bandwidth compared to >100MB/s
|
||||
* for memcopy operations
|
||||
*/
|
||||
if(w == LCD_WIDTH)
|
||||
{
|
||||
memcpy((void *)FRAME, FBADDR(x,y), w * h * sizeof(fb_data));
|
||||
}
|
||||
else
|
||||
{
|
||||
for(int i = 0; i < h; i++)
|
||||
memcpy((fb_data *)FRAME + i * w, FBADDR(x,y + i), w * sizeof(fb_data));
|
||||
}
|
||||
/* WARNING The LCDIF has a limitation on the vertical count ! In 16-bit packed mode
|
||||
* (which we used, ie 16-bit per pixel, 2 pixels per 32-bit words), the v_count
|
||||
* field must be a multiple of 2. Furthermore, it seems the lcd controller doesn't
|
||||
* really like when both w and h are even, probably because the writes to the GRAM
|
||||
* are done on several words and the controller requires dummy writes.
|
||||
* The workaround is to always make sure that we send a number of pixels which is
|
||||
* a multiple of 4 so that both the lcdif and the controller are happy. If any
|
||||
* of w or h is odd, we will send a copy of the first pixels as dummy writes. We will
|
||||
* send at most 3 bytes. We then send (w * h + 3) / 4 x 4 bytes.
|
||||
*/
|
||||
if(w % 2 == 1 || h % 2 == 1)
|
||||
{
|
||||
/* copy three pixel after the last one */
|
||||
for(int i = 0; i < 3; i++)
|
||||
*((fb_data *)FRAME + w * h + i) = *((fb_data *)FRAME + i);
|
||||
/* WARNING we need to update w and h to reflect the pixel count BUT it
|
||||
* has no relation to w * h (it can even be 2 * prime). Hopefully, w <= 240 and
|
||||
* h <= 320 so w * h <= 76800 and (w * h + 3) / 4 <= 38400 which fits into
|
||||
* a 16-bit integer (horizontal count). */
|
||||
h = (w * h + 3) / 4;
|
||||
w = 4;
|
||||
}
|
||||
imx233_lcdif_dma_send((void *)FRAME_PHYS_ADDR, w, h);
|
||||
}
|
||||
|
||||
void lcd_yuv_set_options(unsigned options)
|
||||
{
|
||||
lcd_yuv_options = options;
|
||||
}
|
||||
|
||||
#define YFAC (74)
|
||||
#define RVFAC (101)
|
||||
#define GUFAC (-24)
|
||||
#define GVFAC (-51)
|
||||
#define BUFAC (128)
|
||||
|
||||
static inline int clamp(int val, int min, int max)
|
||||
{
|
||||
if (val < min)
|
||||
val = min;
|
||||
else if (val > max)
|
||||
val = max;
|
||||
return val;
|
||||
}
|
||||
|
||||
void lcd_blit_yuv(unsigned char * const src[3],
|
||||
int src_x, int src_y, int stride,
|
||||
int x, int y, int width, int height)
|
||||
{
|
||||
const unsigned char *ysrc, *usrc, *vsrc;
|
||||
int linecounter;
|
||||
fb_data *dst, *row_end;
|
||||
long z;
|
||||
|
||||
/* width and height must be >= 2 and an even number */
|
||||
width &= ~1;
|
||||
linecounter = height >> 1;
|
||||
|
||||
#if LCD_WIDTH >= LCD_HEIGHT
|
||||
dst = FBADDR(x,y);
|
||||
row_end = dst + width;
|
||||
#else
|
||||
dst = FBADDR(LCD_WIDTH - y - 1,x);
|
||||
row_end = dst + LCD_WIDTH * width;
|
||||
#endif
|
||||
|
||||
z = stride * src_y;
|
||||
ysrc = src[0] + z + src_x;
|
||||
usrc = src[1] + (z >> 2) + (src_x >> 1);
|
||||
vsrc = src[2] + (usrc - src[1]);
|
||||
|
||||
/* stride => amount to jump from end of last row to start of next */
|
||||
stride -= width;
|
||||
|
||||
/* upsampling, YUV->RGB conversion and reduction to RGB565 in one go */
|
||||
|
||||
do
|
||||
{
|
||||
do
|
||||
{
|
||||
int y, cb, cr, rv, guv, bu, r, g, b;
|
||||
|
||||
y = YFAC*(*ysrc++ - 16);
|
||||
cb = *usrc++ - 128;
|
||||
cr = *vsrc++ - 128;
|
||||
|
||||
rv = RVFAC*cr;
|
||||
guv = GUFAC*cb + GVFAC*cr;
|
||||
bu = BUFAC*cb;
|
||||
|
||||
r = y + rv;
|
||||
g = y + guv;
|
||||
b = y + bu;
|
||||
|
||||
if ((unsigned)(r | g | b) > 64*256-1)
|
||||
{
|
||||
r = clamp(r, 0, 64*256-1);
|
||||
g = clamp(g, 0, 64*256-1);
|
||||
b = clamp(b, 0, 64*256-1);
|
||||
}
|
||||
|
||||
*dst = LCD_RGBPACK_LCD(r >> 9, g >> 8, b >> 9);
|
||||
|
||||
#if LCD_WIDTH >= LCD_HEIGHT
|
||||
dst++;
|
||||
#else
|
||||
dst += LCD_WIDTH;
|
||||
#endif
|
||||
|
||||
y = YFAC*(*ysrc++ - 16);
|
||||
r = y + rv;
|
||||
g = y + guv;
|
||||
b = y + bu;
|
||||
|
||||
if ((unsigned)(r | g | b) > 64*256-1)
|
||||
{
|
||||
r = clamp(r, 0, 64*256-1);
|
||||
g = clamp(g, 0, 64*256-1);
|
||||
b = clamp(b, 0, 64*256-1);
|
||||
}
|
||||
|
||||
*dst = LCD_RGBPACK_LCD(r >> 9, g >> 8, b >> 9);
|
||||
|
||||
#if LCD_WIDTH >= LCD_HEIGHT
|
||||
dst++;
|
||||
#else
|
||||
dst += LCD_WIDTH;
|
||||
#endif
|
||||
}
|
||||
while (dst < row_end);
|
||||
|
||||
ysrc += stride;
|
||||
usrc -= width >> 1;
|
||||
vsrc -= width >> 1;
|
||||
|
||||
#if LCD_WIDTH >= LCD_HEIGHT
|
||||
row_end += LCD_WIDTH;
|
||||
dst += LCD_WIDTH - width;
|
||||
#else
|
||||
row_end -= 1;
|
||||
dst -= LCD_WIDTH*width + 1;
|
||||
#endif
|
||||
|
||||
do
|
||||
{
|
||||
int y, cb, cr, rv, guv, bu, r, g, b;
|
||||
|
||||
y = YFAC*(*ysrc++ - 16);
|
||||
cb = *usrc++ - 128;
|
||||
cr = *vsrc++ - 128;
|
||||
|
||||
rv = RVFAC*cr;
|
||||
guv = GUFAC*cb + GVFAC*cr;
|
||||
bu = BUFAC*cb;
|
||||
|
||||
r = y + rv;
|
||||
g = y + guv;
|
||||
b = y + bu;
|
||||
|
||||
if ((unsigned)(r | g | b) > 64*256-1)
|
||||
{
|
||||
r = clamp(r, 0, 64*256-1);
|
||||
g = clamp(g, 0, 64*256-1);
|
||||
b = clamp(b, 0, 64*256-1);
|
||||
}
|
||||
|
||||
*dst = LCD_RGBPACK_LCD(r >> 9, g >> 8, b >> 9);
|
||||
|
||||
#if LCD_WIDTH >= LCD_HEIGHT
|
||||
dst++;
|
||||
#else
|
||||
dst += LCD_WIDTH;
|
||||
#endif
|
||||
|
||||
y = YFAC*(*ysrc++ - 16);
|
||||
r = y + rv;
|
||||
g = y + guv;
|
||||
b = y + bu;
|
||||
|
||||
if ((unsigned)(r | g | b) > 64*256-1)
|
||||
{
|
||||
r = clamp(r, 0, 64*256-1);
|
||||
g = clamp(g, 0, 64*256-1);
|
||||
b = clamp(b, 0, 64*256-1);
|
||||
}
|
||||
|
||||
*dst = LCD_RGBPACK_LCD(r >> 9, g >> 8, b >> 9);
|
||||
|
||||
#if LCD_WIDTH >= LCD_HEIGHT
|
||||
dst++;
|
||||
#else
|
||||
dst += LCD_WIDTH;
|
||||
#endif
|
||||
}
|
||||
while (dst < row_end);
|
||||
|
||||
ysrc += stride;
|
||||
usrc += stride >> 1;
|
||||
vsrc += stride >> 1;
|
||||
|
||||
#if LCD_WIDTH >= LCD_HEIGHT
|
||||
row_end += LCD_WIDTH;
|
||||
dst += LCD_WIDTH - width;
|
||||
#else
|
||||
row_end -= 1;
|
||||
dst -= LCD_WIDTH*width + 1;
|
||||
#endif
|
||||
}
|
||||
while (--linecounter > 0);
|
||||
|
||||
#if LCD_WIDTH >= LCD_HEIGHT
|
||||
lcd_update_rect(x, y, width, height);
|
||||
#else
|
||||
lcd_update_rect(LCD_WIDTH - y - height, x, height, width);
|
||||
#endif
|
||||
}
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2012 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#include "system.h"
|
||||
#include "power.h"
|
||||
#include "tuner.h"
|
||||
#include "fmradio_i2c.h"
|
||||
#include "pinctrl-imx233.h"
|
||||
|
||||
static bool tuner_enable = false;
|
||||
|
||||
bool tuner_power(bool enable)
|
||||
{
|
||||
if(enable != tuner_enable)
|
||||
{
|
||||
tuner_enable = enable;
|
||||
}
|
||||
return tuner_enable;
|
||||
}
|
||||
|
||||
bool tuner_powered(void)
|
||||
{
|
||||
return tuner_enable;
|
||||
}
|
||||
|
|
@ -0,0 +1,58 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2012 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#ifndef POWERMGMT_TARGET_H
|
||||
#define POWERMGMT_TARGET_H
|
||||
|
||||
#include "config.h"
|
||||
#include "powermgmt-imx233.h"
|
||||
|
||||
/* Creative ZEN X-Fi3 OF settings:
|
||||
* - current ramp slope: 10 mA/s
|
||||
* - conditioning threshold voltage: 3 V
|
||||
* - conditioning max voltage: 3.1 V
|
||||
* - conditioning current: 60 mA
|
||||
* - conditioning timeout: 1 h
|
||||
* - charging voltage: 4.2 V
|
||||
* - charging current: 260 mA
|
||||
* - charging threshold current: 20 mA
|
||||
* - charging timeout: 4 h
|
||||
* - top off period: 30 min
|
||||
* - high die temperature: 91 °C
|
||||
* - low die temperature: 56 °C
|
||||
* - safe die temperature current: 30 mA
|
||||
* - battery temperature channel: 0
|
||||
* - high battery temperature: 2400
|
||||
* - low battery temperature: 2300
|
||||
* - safe battery temperature current: 0 mA
|
||||
* - low DCDC battery voltage: 3.9 V
|
||||
*/
|
||||
|
||||
#define IMX233_CHARGE_CURRENT 260
|
||||
#define IMX233_STOP_CURRENT 20
|
||||
#define IMX233_TOPOFF_TIMEOUT (30 * 60 * HZ)
|
||||
#define IMX233_CHARGING_TIMEOUT (4 * 3600 * HZ)
|
||||
#define IMX233_DIE_TEMP_HIGH 91
|
||||
#define IMX233_DIE_TEMP_LOW 56
|
||||
#define IMX233_BATT_TEMP_SENSOR 0
|
||||
#define IMX233_BATT_TEMP_HIGH 2400
|
||||
#define IMX233_BATT_TEMP_LOW 2300
|
||||
|
||||
#endif /* POWERMGMT_TARGET_H */
|
||||
|
|
@ -0,0 +1,46 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2012 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#include "config.h"
|
||||
#include "powermgmt-target.h"
|
||||
|
||||
const unsigned short battery_level_dangerous[BATTERY_TYPES_COUNT] =
|
||||
{
|
||||
3659
|
||||
};
|
||||
|
||||
const unsigned short battery_level_shutoff[BATTERY_TYPES_COUNT] =
|
||||
{
|
||||
3630
|
||||
};
|
||||
|
||||
/* voltages (millivolt) of 0%, 10%, ... 100% when charging disabled */
|
||||
const unsigned short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11] =
|
||||
{
|
||||
/* Toshiba Gigabeat S Li Ion 700mAH figured from discharge curve */
|
||||
{ 3659, 3719, 3745, 3761, 3785, 3813, 3856, 3926, 3984, 4040, 4121 },
|
||||
};
|
||||
|
||||
/* voltages (millivolt) of 0%, 10%, ... 100% when charging enabled */
|
||||
const unsigned short percent_to_volt_charge[11] =
|
||||
{
|
||||
/* Toshiba Gigabeat S Li Ion 700mAH figured from charge curve */
|
||||
4028, 4063, 4087, 4111, 4135, 4156, 4173, 4185, 4194, 4202, 4208
|
||||
};
|
||||
|
|
@ -62,6 +62,28 @@ struct sd_config_t sd_config[] =
|
|||
.power_pin = PIN(0, 8),
|
||||
.ssp = 1
|
||||
},
|
||||
#elif defined(CREATIVE_ZENXFI2)
|
||||
/* The Zen X-Fi2 uses pin B1P29 for power*/
|
||||
{
|
||||
.name = "microSD",
|
||||
.flags = POWER_PIN | REMOVABLE | DETECT_INVERTED,
|
||||
.power_pin = PIN(1, 29),
|
||||
.ssp = 1,
|
||||
},
|
||||
#elif defined(CREATIVE_ZENXFI3)
|
||||
{
|
||||
.name = "internal/SD",
|
||||
.flags = WINDOW,
|
||||
.ssp = 2
|
||||
},
|
||||
/* The Zen X-Fi3 uses pin #B0P07 for power*/
|
||||
{
|
||||
.name = "microSD",
|
||||
.flags = POWER_PIN | POWER_INVERTED | REMOVABLE | POWER_DELAY,
|
||||
.power_pin = PIN(0, 7),
|
||||
.power_delay = HZ / 10, /* extra delay, to ramp up voltage? */
|
||||
.ssp = 1
|
||||
},
|
||||
#else
|
||||
#error You need to write the sd config!
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -148,7 +148,7 @@ void NORETURN_ATTR UIE(unsigned int pc, unsigned int num)
|
|||
if (!triggered)
|
||||
{
|
||||
triggered = true;
|
||||
backtrace(pc, __get_sp(), &line);
|
||||
//backtrace(pc, __get_sp(), &line);
|
||||
}
|
||||
|
||||
lcd_update();
|
||||
|
|
|
|||
|
|
@ -431,6 +431,13 @@
|
|||
#define UI_LCD_POSX 68
|
||||
#define UI_LCD_POSY 77
|
||||
|
||||
#elif defined(CREATIVE_ZENXFI3)
|
||||
#define UI_TITLE "Creative ZEN X-Fi3"
|
||||
#define UI_WIDTH 262 /* width of GUI window */
|
||||
#define UI_HEIGHT 350 /* height of GUI window */
|
||||
#define UI_LCD_POSX 43
|
||||
#define UI_LCD_POSY 65
|
||||
|
||||
#elif defined(APPLICATION)
|
||||
#define UI_TITLE "Rockbox"
|
||||
#define UI_LCD_POSX 0
|
||||
|
|
|
|||
|
|
@ -1271,27 +1271,28 @@ cat <<EOF
|
|||
90) Zen Vision:M 30GB 100) GoGear SA9200 54) Sansa c100
|
||||
91) Zen Vision:M 60GB 101) GoGear HDD1630/ 55) Sansa Clip
|
||||
92) Zen Vision HDD1830 56) Sansa e200v2
|
||||
102) GoGear HDD6330 57) Sansa m200v4
|
||||
==Onda== 58) Sansa Fuze
|
||||
120) VX747 ==Meizu== 59) Sansa c200v2
|
||||
121) VX767 110) M6SL 60) Sansa Clipv2
|
||||
122) VX747+ 111) M6SP 61) Sansa View
|
||||
123) VX777 112) M3 62) Sansa Clip+
|
||||
63) Sansa Fuze v2
|
||||
==Samsung== ==Tatung== 64) Sansa Fuze+
|
||||
140) YH-820 150) Elio TPJ-1022 65) Sansa Clip Zip
|
||||
141) YH-920 66) Sansa Connect
|
||||
142) YH-925 ==Packard Bell==
|
||||
143) YP-S3 160) Vibe 500 ==Logik==
|
||||
80) DAX 1GB MP3/DAB
|
||||
==Application== ==MPIO==
|
||||
200) SDL 170) HD200 ==Lyre project==
|
||||
201) Android 171) HD300 130) Lyre proto 1
|
||||
202) Nokia N8xx 131) Mini2440
|
||||
203) Nokia N900 ==ROCKCHIP== ==HiFiMAN==
|
||||
204) Pandora 180) rk27xx generic 190) HM-60x
|
||||
205) Samsung YP-R0 191) HM-801
|
||||
|
||||
93) Zen X-Fi2 102) GoGear HDD6330 57) Sansa m200v4
|
||||
94) Zen X-Fi3 58) Sansa Fuze
|
||||
==Meizu== 59) Sansa c200v2
|
||||
==Onda== 110) M6SL 60) Sansa Clipv2
|
||||
120) VX747 111) M6SP 61) Sansa View
|
||||
121) VX767 112) M3 62) Sansa Clip+
|
||||
122) VX747+ 63) Sansa Fuze v2
|
||||
123) VX777 ==Tatung== 64) Sansa Fuze+
|
||||
150) Elio TPJ-1022 65) Sansa Clip Zip
|
||||
==Samsung== 66) Sansa Connect
|
||||
140) YH-820 ==Packard Bell==
|
||||
141) YH-920 160) Vibe 500 ==Logik==
|
||||
142) YH-925 80) DAX 1GB MP3/DAB
|
||||
143) YP-S3 ==MPIO==
|
||||
170) HD200 ==Lyre project==
|
||||
==Application== 171) HD300 130) Lyre proto 1
|
||||
200) SDL 131) Mini2440
|
||||
201) Android ==ROCKCHIP==
|
||||
202) Nokia N8xx 180) rk27xx generic ==HiFiMAN==
|
||||
203) Nokia N900 190) HM-60x
|
||||
204) Pandora 191) HM-801
|
||||
205) Samsung YP-R0
|
||||
EOF
|
||||
|
||||
buildfor=`input`;
|
||||
|
|
@ -2199,6 +2200,46 @@ fi
|
|||
t_model="creative-zvm"
|
||||
;;
|
||||
|
||||
93|creativezenxfi2)
|
||||
target_id=80
|
||||
modelname="creativezenxfi2"
|
||||
target="CREATIVE_ZENXFI2"
|
||||
memory=64
|
||||
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
||||
bmp2rb_native="$rootdir/tools/bmp2rb -f 4"
|
||||
tool="$rootdir/tools/scramble -add=zxf2"
|
||||
output="rockbox.creative"
|
||||
bootoutput="bootloader-zenxfi2.creative"
|
||||
appextra="gui:recorder:radio"
|
||||
plugins="yes"
|
||||
swcodec="yes"
|
||||
toolset=$scramblebitmaptools
|
||||
t_cpu="arm"
|
||||
t_manufacturer="imx233"
|
||||
t_model="creative-zenxfi2"
|
||||
arm926ejscc
|
||||
;;
|
||||
|
||||
94|creativezenxfi3)
|
||||
target_id=81
|
||||
modelname="creativezenxfi3"
|
||||
target="CREATIVE_ZENXFI3"
|
||||
memory=64
|
||||
bmp2rb_mono="$rootdir/tools/bmp2rb -f 0"
|
||||
bmp2rb_native="$rootdir/tools/bmp2rb -f 4"
|
||||
tool="$rootdir/tools/scramble -add=zxf3"
|
||||
output="rockbox.creative"
|
||||
bootoutput="bootloader-zenxfi3.creative"
|
||||
appextra="gui:recorder:radio"
|
||||
plugins="no"
|
||||
swcodec="yes"
|
||||
toolset=$scramblebitmaptools
|
||||
t_cpu="arm"
|
||||
t_manufacturer="imx233"
|
||||
t_model="creative-zenxfi3"
|
||||
arm926ejscc
|
||||
;;
|
||||
|
||||
50|sansae200)
|
||||
target_id=23
|
||||
modelname="sansae200"
|
||||
|
|
|
|||
|
|
@ -128,7 +128,7 @@ void usage(void)
|
|||
"\t 9200, 1630, 6330, ldax, m200, c100, clip, e2v2,\n"
|
||||
"\t m2v4, fuze, c2v2, clv2, y820, y920, y925, x747,\n"
|
||||
"\t 747p, x777, nn2g, m244, cli+, fuz2, hd20, hd30,\n"
|
||||
"\t ip6g, rk27, clzp)\n");
|
||||
"\t ip6g, rk27, clzp, zxf2, zxf3)\n");
|
||||
printf("\nNo option results in Archos standard player/recorder format.\n");
|
||||
|
||||
exit(1);
|
||||
|
|
@ -361,6 +361,10 @@ int main (int argc, char** argv)
|
|||
modelnum = 79;
|
||||
else if (!strcmp(&argv[1][5], "conn")) /* Sansa Connect */
|
||||
modelnum = 81;
|
||||
else if (!strcmp(&argv[1][5], "zxf2")) /* Creative Zen X-Fi2 */
|
||||
modelnum = 82;
|
||||
else if (!strcmp(&argv[1][5], "zxf3")) /* Creative Zen X-Fi3 */
|
||||
modelnum = 83;
|
||||
else {
|
||||
fprintf(stderr, "unsupported model: %s\n", &argv[1][5]);
|
||||
return 2;
|
||||
|
|
|
|||
Binary file not shown.
|
After Width: | Height: | Size: 269 KiB |
|
|
@ -67,6 +67,8 @@ mpio-hd200.c
|
|||
mpio-hd300.c
|
||||
#elif CONFIG_KEYPAD == SANSA_FUZEPLUS_PAD
|
||||
sansa-fuzeplus.c
|
||||
#elif CONFIG_KEYPAD == CREATIVE_ZENXFI3_PAD
|
||||
creative-zenxfi3.c
|
||||
#elif CONFIG_KEYPAD == SANSA_CONNECT_PAD
|
||||
sansa-connect.c
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -0,0 +1,74 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Copyright (C) 2011 by Amaury Pouly
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
|
||||
#include <SDL.h>
|
||||
#include "button.h"
|
||||
#include "buttonmap.h"
|
||||
|
||||
int key_to_button(int keyboard_button)
|
||||
{
|
||||
int new_btn = BUTTON_NONE;
|
||||
switch (keyboard_button)
|
||||
{
|
||||
case SDLK_KP4:
|
||||
case SDLK_LEFT:
|
||||
new_btn = BUTTON_LEFT;
|
||||
break;
|
||||
case SDLK_KP6:
|
||||
case SDLK_RIGHT:
|
||||
new_btn = BUTTON_RIGHT;
|
||||
break;
|
||||
case SDLK_KP8:
|
||||
case SDLK_UP:
|
||||
new_btn = BUTTON_UP;
|
||||
break;
|
||||
case SDLK_KP2:
|
||||
case SDLK_DOWN:
|
||||
new_btn = BUTTON_DOWN;
|
||||
break;
|
||||
case SDLK_PAGEDOWN:
|
||||
case SDLK_KP3:
|
||||
new_btn = BUTTON_MENU;
|
||||
break;
|
||||
case SDLK_KP_PLUS:
|
||||
new_btn = BUTTON_VOL_UP;
|
||||
break;
|
||||
case SDLK_KP_MINUS:
|
||||
new_btn = BUTTON_VOL_DOWN;
|
||||
break;
|
||||
case SDLK_HOME:
|
||||
new_btn = BUTTON_POWER;
|
||||
break;
|
||||
}
|
||||
return new_btn;
|
||||
}
|
||||
|
||||
struct button_map bm[] = {
|
||||
{ SDLK_LEFT, 69, 303, 10, "Left" },
|
||||
{ SDLK_RIGHT, 241, 172, 10, "Right" },
|
||||
{ SDLK_UP, 240, 87, 10, "Up" },
|
||||
{ SDLK_DOWN, 239, 264, 10, "Down" },
|
||||
{ SDLK_PAGEDOWN, 191, 303, 10, "Menu" },
|
||||
{ SDLK_KP_MINUS, 270, 150, 0, "Volume -" },
|
||||
{ SDLK_KP_PLUS, 270, 180, 0, "Volume +" },
|
||||
{ 0, 0, 0, 0, "None" }
|
||||
};
|
||||
Loading…
Reference in New Issue