Ideally this commit should go on top of the v3.13 branch
since the release is based on the v3.13 code base.
Change-Id: If13cf87463c7a3f7a9c2c96c916c543c9d2ed1a5
When creating a new HttpGet object schedule any old one for deletion instead of
dropping its reference and relying on Qt to clean it up once the parent object
is removed.
Change-Id: I66f2a6f01c6b6ad3a0dce0eb4fd3eacfaf7e733d
Schedule them for deletion instead of deleting them. That way pending events
can still be handled before the main loop deletes them. Fixes crashes on the
second download during installation.
Change-Id: I7c718dbb0200a64d1aa3bbb6c2839282fb965dec
SAPI only allowed values from 1.0 to 10.0, making it impossible to turn down
the volume of the voice. Increasing the volume by a factor of 10.0 is nothing
that is likely to be useful, so change the upper limit to 2.0 and decrease the
lower limit to 0.0.
Lame allowed values from 0.0 to 1.0, making it impossible to increase the
volume of the voice. Change the upper limit to 2.0 as well.
Change-Id: I8add103f6e4b3c8f1b11ee2c0ea478727bdc99c1
Prevents cutoff of tracks, especially short ones:
* Extend looped tracks by fade length to fade at start of loop repeat.
* No fade occurs for non-repeating track only having an intro.
* Uses id3.tail_trim field to store fade duration.
Use libGME built-in elapsed time reporting instead of custom calculation:
* libGME already reports in milliseconds.
* Don't advance time counter when Repeat == One. It just runs the progress
over the length limit.
Fix a comment about sample rate and set the reported bitrate to be
accurate for 44.1 kHz stereo.
Change-Id: I3ede22bda0f9a941a3fef751f4d678eb0027344c
This patch adds to YP-R0 (and other future targets using Linux
framebuffer) the ability to use LCD_ENABLE to save some CPU cycles
while display is powered off.
This patch also changes the way to toggle LCD power: now using
a proper ioctl call, slightly more efficient.
Change-Id: I544de77f5abd4ac1c13d3fe3a6e40a30f7c0bece
Reviewed-on: http://gerrit.rockbox.org/410
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
The GPIO device file wasn't closed due to this. This wasn't a big deal
because the device powers off shorty afterwards anyway.
Change-Id: I9a6b4d57d32627157323b4883e47b8812f5dcb4d
As per title this patch aims at splitting common target
code and specific target code in a better way to
support future ports within the same environment
(e.g. Samsung YP-R1 where the Linux and the SoC
are the same, with differences in hardware devices
handling)
Change-Id: I67b4918c46403b184d3d8f42ab5aae7d01037fd0
Reviewed-on: http://gerrit.rockbox.org/409
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
added a missing string and some other fixes
Change-Id: I153f42687cf855835b7a41b5b3adc4bf120f7f61
Reviewed-on: http://gerrit.rockbox.org/413
Reviewed-by: Purling Nayuki <cyq.yzfl@gmail.com>
Tested-by: Purling Nayuki <cyq.yzfl@gmail.com>
Reviewed-by: Alex Parker <rockbox@aeparker.com>
Tested-by: Alex Parker <rockbox@aeparker.com>
- Reduce the minimum step for EQ 'Gain' and EQ 'Q' values to .1dB
- Reduce the minimum step for EQ 'Precut' value to .1dB
Change-Id: I20712b3c769f9da4d6ed53c62d6a2a8352b6b269
Reviewed-on: http://gerrit.rockbox.org/414
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
- s/Ram/RAM/
Change-Id: I65ea87b5b2fce85d8d1a0cfaec06fb2c47aaa79f
Reviewed-on: http://gerrit.rockbox.org/415
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
d6c6c07 changed the AA load tag to make sure the image width/heights
fit in the viewport, Revert this because it doesn't actually make
sense to check it here.
Change-Id: I3fe4b074ef8fe88560f2f894ec651027ea3642f4
libtlsf used not to be built for HWCODEC, but now that the gif
viewer uses libtlsf instead of building its own copy, libtlsf
is needed everywhere.
Change-Id: I730719c6a20e749adb8597056d2049b7758620e4
The "plot" variable was left NULL when FFT_FREQ_SCALE key wasn't defined.
Please add FFT_FREQ_SCALE keys to targets missing them! I added the key
for Clip Zip and reminders for others.
Change-Id: I49c0dc2ea2e5bc494db793da7a2f3059b4fb20df
Fix the need to resize progress bar when using a slider.
Slider stays in bounds. Progress bar is not resized.
Works well with square sliders that should not overlap
edge of progress bar. also works with rounded sliders.
You can also make progress bar the full width of screen
while using a slider. Before if you would make the
progress bar the full width of the screen and add a slider
the progress bar would look like it was padded on both ends.
This fixes FS#12823
Change-Id: I60345efc5cd0f46286f2591ed032f0d9320d1c3e
Reviewed-on: http://gerrit.rockbox.org/402
Reviewed-by: Hayden Pearce <saint.lascivious@gmail.com>
Tested-by: Hayden Pearce <saint.lascivious@gmail.com>
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
Flush decoder state and frame out buffer upon a forced stop to prevent
a short burst of stale audio from the previously decoding track from
playing when skipping from one WMA track to another.
Change-Id: I24c910c5dbd83caed2510db68d9e39a474332a79
Reviewed-on: http://gerrit.rockbox.org/406
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
After some reverse engineering, it appears that the keys of the
sb1 format are very weak: the 128 bytes are generated from the
laserfuse words 4,5 and 6 but in a weird manner: 4 and 5 are
simply ORed and 6 is only half used (somehow), making it "only" a
48 bit word to find.
Change-Id: I40702e19d0924ef51c01894efce3cb65bd664456
thanks to pixelma for having pointed this out and
correcting the first patch
Change-Id: I79f6264a5290906b0d7abd1703df79fde104cb4a
Reviewed-on: http://gerrit.rockbox.org/405
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Thomas Jarosch
Dominik Riebeling
Alex Parker
Michael Sevakis
Lorenzo Miori
Thomas Martitz
Frank Gevaerts
PurlingNayuki
Hayden Pearce
Amaury Pouly
Jonathan Gordon
Stephane Moutard-Martin
Alex Mayer
Rafaël Carré
Andrew Ryabinin
Stefan Moisei
Jean-Louis Biasini